Related
I have seen a few threads on here about it, but they usually have to do with people having problems. I would really like some sort of bluetooth gps solution for my VOX. I really don't want to spend $500 or more on a tomtom or garmin or something like that because I will only be using it very rarely. So to make it easy for me, and everyone else.
Whats the best combination of hardware and software to turn my vox into a GPS navigation device? Thanks.
I'm currently looking at a holux M-1000 receiver and I already have google maps installed, any help is appreciated.
ok i had this problem with my vox looking around for a good sat nav program and i found out that route 66 was the best it works fine with no problem with out messing around with settings all i did was install it and then run it just make sure your bluetooth gps is on and paired with the phone and also make sure you have ticked the com port settings if you pm me i can help you out with a link to get the programe hope this helps
I would say smart2go is your solution.
You pay for the time you intend to use it.
7 Euros (roughly) give you access to 1 week of navigation, 50Euros to 1 year... If I remember well.
Maps get updated, you either download the portion your crossing via GPRS or you store them completely via your PC on the memory card.
You go on Holiday 1 month and you need Nav? Pay just for 1 month.
TomTom is surely very good... But cheaper can also be nice.
Ka.
TOMTOM
I use Tomtom mobile 5 and this proves to work very well, Cost me very little(less than you might think) from tomtom direct so its very cheap and currently the best navigation solution available for windows mobile, Version 6 will work but it needs some tweaking. One issue with tomtom mobile 5 is that you MUST remember to name your bluetooth gps "BT GPS" during pairing otherwise you could have some issues with tomtom recognizing your gps module.
@kast,
what version of smart2go do I have to install on the vox ?
The windows mobile 5 phone edition ?
Marcus
Hi everyone ... i have a big problem.
i use my HTC S710 ex dopod c500 as navigation equipemnt too
software i use is ROUTE 66 MOBILE 7 and gps bluetooth device Garmin GPS10
i not used it for a while about one month. Now i try to use but software tell me that cant estabilesh connection with GPS device. i try to reinstall software ... hard reset phone ... change rom ... but still not work ...
GPS device work cz i trye to conned it with navigation software on notebook and work well ....
I test mobile bluethoot tranfering files and work well ... he see GPS device and pair well ....
so ... why smartphone cant connect with GPS?
thanks everyones
Try with other software like Efficasoft GPS Utilities
I try with Efficasoft GPS Utilities as you told me ... but still not work. Software see my device, estabilish connection ... something happen : i can see altitude incerase and decrease ...
i dunno how to post here pic of my mobile screen ... any way this happen ...
only Alt. change ... N and E always 000000 Sat 6/0 some times 5/0 ... when i tun off gps ... GPS utilities give me error ... so mean mobile and gps in some way comunicate.
I try with TOM TOM ... not work too ....
i feel problem is in mobile's bluetooth configuration.
i try creating "new outgoing port" in mobile .... set com6 and com7 ...
same ... no work
really dunno why some weeks ago work perfect .. and now not
try again gps and notebook ... work perfect
plsss help meeee
i try again today ... driving car GPS on and Efficasoft GPS utilities on .... the only data i can get from satellite is Altitude ....
sat always .... 5/0 .... dindt get N and E
pls help meee ....
why before work .. and now not?
hi
you must name the gps "OTHER BLUETOOTH GPS"
when you sync it with the phone
it will work well with tomtom and other soft
I don,t know with tomtom but with Efficasoft GPS Utilities you must check in Menu->GPS Setup->AutoSearch Bluetooth GPS reciver, and see if there is your device, or choose manual your device.
After that don't forget to go to Menu->Start GPS
matrix77 said:
I don,t know with tomtom but with Efficasoft GPS Utilities you must check in Menu->GPS Setup->AutoSearch Bluetooth GPS reciver, and see if there is your device, or choose manual your device.
After that don't forget to go to Menu->Start GPS
Click to expand...
Click to collapse
i try in this way exactly .... he find my GPS ... but after start GPS in main menu ... can get only altitude.
i just reinstalled HTC official ROM ... but still the same.
i changed navigation software with Garmin Mobile XT and maps from Mapsource.
work perfect ...
sunno why with garmim software work but other software nop.
My Gps module is garmin gps 10d ... maybe now work only with garmin software .. but i know before i used with tomtom and route 66.
anyway ... garmin mobile xt is good too
tnks
Good morning I have a probleme with Garmin XT and my HTC VOX it connect has my GPS but rest blocked on research satellite
install this cab and then try
View attachment enablegps.CAB
it has few registry tweaks enabling gps connection
this will help you connect
his step always not
I think your GPS programs might have been "fighting" for the GPS data or that it had bad epheremis data. It is recommended that with WM 6.1 and above to have the GPS "managed" by the system.
You do this by going from the Start Menu to Settings to System and select External GPS. Then you want to select the Port your programs will use to obtain GPS data. Normally the four lower ones were commonly used by most computer systems which is why I recommend selecting COM9 as the port.
On the Hardware tab, you need to identify which Port your GPS is on. I used GPSToggle, which is a Today plug-in, to start and warm up my GPS. You can read about GPSToggle here: http://www.freewarepocketpc.net/ppc-download-gps-toggle.html.
Download the CAB file which I recommend installing to your device internal memory. Then go to your Today screen and then to Settings menu followed by Today. On the Items check the box next to BAF GPS Toggle. Click okay and this will place GPSToggle on your Today screen.
Unfortunately most smartphones do not have dedicated GPS chips because they eat battery power. On a dedicated receiver like a Personal Navigation Assistant (handheld GPS aka PNA), the GPS is turned on automatically when the PNA is powered up. Depending upon when your GPS was last activated, a dedicated SIRF chip can go from cold-start to 3D fix in as little as 42 seconds and as long as three minutes if epheremis data is present and the GPS has not been moved more than 10 miles from its last power up.
For most smartphone users, the last time your GPS was fired up was when it was built in China or wherever. The GPS can retain that information as its old epheremis data which is used to communicate with satellites. If the data is bad and old, it can take much longer for your GPS to lock-on and get a 3D fix.
For this reason, it is recommended that on smartphones that a GPS utility like the ones mentioned above be used. In essence, the smartphone's GPS must be "warmed up" from a cold start state to warm state where it is communicating with satellites in resolving a 2D fix ultimately to hot state where 3D fixing is available.
GPSToggle on your Today screen will "warm up the GPS" for you when you turn it. You will then see bars indicating the number of satellites the GPS has found. Once it syncs with them, the bar will go solid. When four bars go solid, 3D fixing is available. At that point you could turn on your satnav program and should be good to go.
If you see the altitude and nothing else comes in then the BT connection is obviously ok, so pairing, establishing the connection via COM port and the program using the connection seems ok.
Your problem then is the GPS receiver not sending the data required.
Find a program that resets the GPS receiver, if you can remove the battery put it out for half a minute and reinsert it. Once the GPS has a satelite fix again it should deliver all data.
A good free powerful utility is SirfTech - obviously only useful if your BT Mouse has a SIRF chipset.
prajith said:
install this cab and then try
View attachment 82758
it has few registry tweaks enabling gps connection
this will help you connect
Click to expand...
Click to collapse
Hello, was enablegps.cab developed here on xda? If so, is there a thread on it?
Will it ever be possible for Android to be able to interface to a Bluetooth GPS Receiver for use in programs like Google Maps?
What sounds like such a simple thing which would give me some respite on my Samsung Galaxy S.
Cheers
Simon
I am curious also.
i need that too
I know that most of the Bluetooth GPS receivers use a simulated Comm port. As long as Android can use the Comm port and receive position data through ASCII sentences, then it should be fine.
i'm gonna try BlueNMEA (it's on the market)
i'll report back
edit: the app seems to be broken :\
If there is an app for NMEA data, that is a good sign. NMEA uses ASCII text strings to send data. To be honest, I know that Garmin's Bluetooth receivers will send NMEA data to the phone.
Sent from my Garminfone using XDA App
Any news on this topic?
Sent from my HTC Desire using Tapatalk
Look for "Bluetooth GPS Provider" or "Bluetooth GPS mouse" in the market...
I didn't want to pay for something like that and I did not understand why I should give phone call or network access for such an application...
So I've have developed mine:
it' free,
it's open-source (you can verify what it's really doing and you can improve it!),
it just asks for needed permissions.
The application allows to use an external bluetooth GPS on Android devices:
The application starts a service, then connects to a Bluetooth device (NMEA GPS) and creates a mock GPS provider which can be used to replace the internal GPS.
It's also possible to log the external GPS NMEA data in a file on the device.
The app need the following permissions:
bluetooth and bluetooth admin (connection to the GPS device),
location and mock location (replace the GPS location provider by a new one using the bluetooth GPS device),
write external storage (if you want to log the NMEA data into a file on the sdcard).
It should run on all android devices (2.0 and above) and NMEA bluetooth devices.
I have tested it with a GlobalSat BT-338 bluetooth GPS (SiRF III), a Galaxy S (I9000) and a HTC Sapphire (Froyo CM-6).
It works with Google Maps, Wikitude, GoPenS and my own personal navigation app. It should work with all applications that use Android official location API.
Note: in order to install the app:
enable Settings/Applications/Unknown sources,
enable Settings/Applications/Development/Allow mock locations,
download and install the apk.
Project page:
Bluetooth GPS for Android on SourceForge
BlueGPS4Droid apk: BlueGps4Droid_1.0.apk
herbert1 said:
I didn't want to pay for something like that and I did not understand why I should give phone call or network access for such an application...
So I've have developed mine:
it' free,
it's open-source (you can verify what it's really doing and you can improve it!),
it just asks for needed permissions.
Click to expand...
Click to collapse
Wow, went from zero of these to three or more.. More is good I guess! Does yours reconnect to the GPS when the connection is lost (walk away from the GPS, GPS accidentally gets turned off in pocket, etc)? What happens if you turn off the phone (hit power button.. standby), does it disconnect? Reconnect? What happens to apps while running, do they pick back up, or reconnect to the internal GPS?
EDIT: It disconnects. You should have it reconnect, especially if the signal was just lost watch for the device to become available again, and it'd also be really nice if it could do it automatically even if not just used; ie I get in the car, fire up the Holux 236 and a few seconds later your program connects to it.
Very very nice start, worked as well as the Bluetooth GPS Mouse program I've been using for a few weeks.. No sat or fix info, but that's a limitation of the Mock interface of course. Not much to be done there.
And it will be great if supports usb gps too. I have an android device with usb host and a usb gps, so will be great if we can attach a serial port to the mock gps in your app.
Thanks.
Corvus.
I actually have stopped using this, as about 50% of the time my phone is freezing when entering Waze with it enabled, 0% of the time without it or using Bluetooth GPS Mouse.
But it is a new program, it has room to grow.
khaytsus said:
Wow, went from zero of these to three or more.. More is good I guess! Does yours reconnect to the GPS when the connection is lost (walk away from the GPS, GPS accidentally gets turned off in pocket, etc)? What happens if you turn off the phone (hit power button.. standby), does it disconnect? Reconnect? What happens to apps while running, do they pick back up, or reconnect to the internal GPS?
EDIT: It disconnects. You should have it reconnect, especially if the signal was just lost watch for the device to become available again,
Click to expand...
Click to collapse
I don't have this kind of problems in my car, so I haven't planned anything for that. For now, I have preferred that, in case of problems, everything stops properly. However I will verify what I can do (if I can find a simple way to do this).
and it'd also be really nice if it could do it automatically even if not just used; ie I get in the car, fire up the Holux 236 and a few seconds later your program connects to it.
Click to expand...
Click to collapse
A priori, no good way for doing this with the sdk. If we have a background task, which runs looking for the GPS mouse to often it won't be good for the battery.
Generally you have to switch on the GPS, so It should not really be a problem to start the service at the same time, especially if, as I do, you plug the android device in a car dock...
Very very nice start, worked as well as the Bluetooth GPS Mouse program I've been using for a few weeks.. No sat or fix info, but that's a limitation of the Mock interface of course. Not much to be done there.
Click to expand...
Click to collapse
You can use the extra info in the location to have the number of sat used.
However, if Google has made a better Mock API, we should be able to use GPS Test directly...
Thanks for your comments,
Herbert
Hello,
I downloaded the file but that is not apk but zip and does not include any apy files.
Where can i download the bluegps4droid.apk file from? or How can I use the zip file in the android unit?
Thanks for the help
Sandor
Any Hope for Android 1.6?
I just tried Bluetooth GPS for Android but sadly found out it won't work with Android 1.6 such as used by my Archos 5 Internet Tablet.
Any hope for 1.6 support? Is it even possible?
I imagine the other two solutions suggested here were not found in my Market because they are 2.x only as well. Boo. I was so looking forward to this solving all my problems of the craptastic GPS in that device.
herbert1 said:
I didn't want to pay for something like that and I did not understand why I should give phone call or network access for such an application...
So I've have developed mine:
it' free,
it's open-source (you can verify what it's really doing and you can improve it!),
it just asks for needed permissions.
The application allows to use an external bluetooth GPS on Android devices:
The application starts a service, then connects to a Bluetooth device (NMEA GPS) and creates a mock GPS provider which can be used to replace the internal GPS.
It's also possible to log the external GPS NMEA data in a file on the device.
The app need the following permissions:
bluetooth and bluetooth admin (connection to the GPS device),
location and mock location (replace the GPS location provider by a new one using the bluetooth GPS device),
write external storage (if you want to log the NMEA data into a file on the sdcard).
It should run on all android devices (2.0 and above) and NMEA bluetooth devices.
I have tested it with a GlobalSat BT-338 bluetooth GPS (SiRF III), a Galaxy S (I9000) and a HTC Sapphire (Froyo CM-6).
It works with Google Maps, Wikitude, GoPenS and my own personal navigation app. It should work with all applications that use Android official location API.
Note: in order to install the app:
enable Settings/Applications/Unknown sources,
enable Settings/Applications/Development/Allow mock locations,
download and install the apk.
Project page:
Bluetooth GPS for Android on SourceForge
BlueGPS4Droid apk: BlueGps4Droid_1.0.apk
Click to expand...
Click to collapse
Any way you could port this to android 1.6 ? everyone with an archos needs this app cause the gps that is in it is terrible . Please please please port it to android 1.6 .
I've been in touch with a developer of one of these programs and unfortunately it is not possible to port these apps to 1.6 since 1.6 lacks some of the Bluetooth APIs/libraries needed for the functionality. Without a whole lot of messy programming it isn't possible for these apps to work on 1.6.
Can I use an USB GPS receivier instead of a Bluetooth one?
Stefem said:
Can I use an USB GPS receivier instead of a Bluetooth one?
Click to expand...
Click to collapse
I am not sure that such app exists...
Some devices (some tablets for example) have usb host capabilities, but not all of them.
If you can read the NMEA sentences from the USB GPS, it should be feasible (At least to adapt one of the app used with bluetooth GPS).
Thanks for this great App!
Wow!
Thanks Herbert1, this was exactly what I was looking for. I am using you app with a Samsung Galaxy S and a Columbus v900 BT GPS reciever. The reciever does the logging and is WAY faster and more accurate then the internal GPS android gives me.
Hi!
I'm using my tf in my car as navigation system. I have the direct comparison to my Samsung Galaxy S (SGS) smart phone and I have to say that Google Navigation isn't running smooth for me. When driving through the streets, the displayed position jumps or jiggles from point to point in an interval with about 6 seconds. My SGS can handle this smooth, with the arrow moving in a constant speed over the maps.
First I expected that the TF has a worse GPS module but it seems that the GPS receiving is pretty good with other diagnostic apps. Could it be that Google Navigation runs better on a slower and older device?
How can I fix this problem? I have the newest OTA update from 25th Aug for DE.
thx
Could you try another navigation software? May be its some of the background app/temps.
How are you getting your Map update?
You will need a 3G data to push the maps (unless you have pre-downloaded them first of course).
Beards said:
How are you getting your Map update?
You will need a 3G data to push the maps (unless you have pre-downloaded them first of course).
Click to expand...
Click to collapse
I activate wlan tethering on my phone and connect the tablet over wlan. Works very good and the map updating is pretty fast. It also possible to listen to webstreams or watch youtube without any problem so I don't expect a problem on the internet connection.
thx for your answer anyway
Can somebody confirm, that it should be possible to have a smooth navigation in google maps navigation? Maybe it is a basically problem with the transformer?
fpdragon said:
I activate wlan tethering on my phone and connect the tablet over wlan. Works very good and the map updating is pretty fast. It also possible to listen to webstreams or watch youtube without any problem so I don't expect a problem on the internet connection.
thx for your answer anyway
Click to expand...
Click to collapse
Understood.....
Try this and see if there is any difference:-
Next time you have a WLAN connection on your TF load Google Maps and download a map you would use for a particular journey.
When you next go out try using just your TF (not tethered) and the downloaded map.
Basically at this stage all we are trying to ascertain if the issue is with tethering or map updates.
Beards said:
Understood.....
Try this and see if there is any difference:-
Next time you have a WLAN connection on your TF load Google Maps and download a map you would use for a particular journey.
When you next go out try using just your TF (not tethered) and the downloaded map.
Basically at this stage all we are trying to ascertain if the issue is with tethering or map updates.
Click to expand...
Click to collapse
2 things:
first... I think the beta labs feature to download maps is just for google maps and not google maps navigation. anyway... I make an offline test.
second... Do you mean to make a test without wlan or bluetooth enabled? Right now there must be much wireless traffic in my car:
bluetooth: phone to parrot
bluetooth: tablet to parrot
wlan: phone to tablet
other wireless: parrot wireless steering wheel remote
Maybe something of these disturbs the GPS?
Your phone is cheating. It has an assisted GPS that uses both GPS and cell triangulation to speed up lock and help maintain location when GPS is weak, without cellular your tf has to rely only on a limited GPS chip.
ryan stewart said:
Your phone is cheating. It has an assisted GPS that uses both GPS and cell triangulation to speed up lock and help maintain location when GPS is weak, without cellular your tf has to rely only on a limited GPS chip.
Click to expand...
Click to collapse
Exactly what I was building up to Ryan.
ryan stewart said:
Your phone is cheating. It has an assisted GPS that uses both GPS and cell triangulation to speed up lock and help maintain location when GPS is weak, without cellular your tf has to rely only on a limited GPS chip.
Click to expand...
Click to collapse
I have to say that I develop GPS Receiver for space use and I know a little bit about GPS
Anyway AGPS or assisted GPS just speeds up the first fix (as you said) and can fix the position error a very little bit. On weak GPS signal it wont make any difference if you have AGPS or GPS. Both wont work and none would work better or worse. With no GPS signal the AGPS Receiver would only know where the satellites are but thats it and he can't navigate with this info only.
So I don't expect a problem due to the not available AGPS, just to stop the speculation .
Maybe it's a SW thing or the GPS chip is just bad.
Anyway I still don't know if google navigation is running smoth on your tablet?
The Problem is solved...
A Speedometer Widget seems to be the cause:
https://market.android.com/details?id=it.opbyte.odometerwidget&feature=search_result
I uninstalled the widget and Google Maps Navigation runs fluently.
thank you all for helping
Hi there,
I'm loving my Surface so far (Had it for two weeks) and would like to know if anyone has managed to pair it with a USB or Bluetooth GPS unit?
If yes, does it work well with the included Bing maps? Or are there any other good apps for use with a GPS?
I potentially have two uses for the device with GPS enabled.
1) As a navigation device
2) As a GPS logger that can log my position and export the data to be used in Photoshop Lightroom to geotag my photos.
If anyone has done this can they please share with GPS device you have tried and how your experiences have been?
I was hoping that using my Android phone as a WiFi hotspot would allow Bing maps access to the GPS location of my phone...but I don't think it works.
I was able to pair it with my BT GPS but no luck actually getting any apps to work with it...
--Chris
christr said:
I was able to pair it with my BT GPS but no luck actually getting any apps to work with it...
--Chris
Click to expand...
Click to collapse
The same result here.
Sent from my Windows 8 device using Board Express Pro
Do you guys have the Windows location platform enabled? I think it may be off by default, which prevents apps from getting your location even when the OS has it.
Open Start, type "location", and look under Settings.