I need to insert a "p" or a "break" or "pauze" in a phonenumber in my Qtek S100 to be able to call internal phonenumbers in our company.
For example : 0032569232P234
234 being the internal number.
With a nokia it's simple you press the "*" button two times fast and you have a "break" in your number. That trick doesn't work with phone application in my Qtek.
Any knows how to do this? Do i need another phone application?
Thanks a lot for your help.
If you store it as a contact just add a "p" when you need it by changing the input method from numeric to abc.
Cheers
LB
It works! thanks a lot!
Related
With my Nokia phone, I used to switch call diverts on and off by "calling a contact" from the phone book, which had the corresponding GSM code stored.
The XDA2 does not like that and informs me that I need to use the phone app's keypad manually.
Dou you have any suggestions for an easy solution, please?
Thanks
V
Guys i am an ex-sx56 user moved off to treo (600 and then 650) and am back to the wizard... I had a phone dialer tool "TAKEPHONE" in the palm world that I used to use and was very handy for phone dialing.
I had a rue setup if there is any number starting with +44 it used to use one calling card and dial the 1800# and with for me to click another button then dial the Pin and the automatically dial the number. That way I never had to change my contacts so that when i am here in the US i use the calling card and when in am there un UK i disable calling card and all the numbers are workable and no updates needed...
I am missing this utility as I travel a lot and dial international a lot… I have looked and have not found any decent tool to do the same.
I looked at the long distance dialer but did not work well with WM5.
I am willing to write some tool if I can get some tapi API in MS.net I have written a utility to make the call now I need to get it to check the state of the line and dial extra digits which I cant figure out
In WM5 I managed to partially solve the problem where I create a new contact with 1800XXXXXXXppYYYY where x is the calling card # and Y is the pin after doing this my calling card service is looking for the actual # it also allows me to fins a number but when I click it it dials another call instead of keying in the digits on the first call….
Not sure if I am expressing this clear but I need help.
I will pay for this kind of app.
I am using long distance dialer , it works ok on my HTC wizard
but I would like to have the one you talking about
Hi guys! I hope you guy's can help me out. Is it possible to insert a pause after a phone number? I would like a 2-3 second pause after an access number then have a pin number auto inserted.I've searched lots of posts but to no avail. Device is a blueangel 2003se.
Cheers!
use the "," (comma) symbol
Thanks for a quick response. Would there a space after the comma then the pin number? ie 07999123456, 1234
Cheers
As far as I know, the phone ignores spaces when dialing. I have one of my contacts set to dial his company's voicemail system, give his voicemail's access code, and leave my number as a numeric message, then hit pound to exit. It is in the format
(555) 555-1212 ,12345,,1234567890#
Thanks for that explanation, NetHead. Worked as you described!
Hi,
in the old (and current I believe as well) Nokia phone - and most other pure mobile phones for that matter - you can dial a "p", typically by holding down the "*" for a while. The "p" makes the phone wait a little while before continuing to dial the rest of the number.
I need this feature!!!
I am using some prepaid phone cards for which this feature is really necessary.
So, anyone have a clue how to get a similar functionality on WM5? The "p" certainly does not work ...
Thanks in advance - Andy
if you're dialing live, you can dial only the connection number then open the keypad to dial the rest of the keycode manually. If you want to automate it, create a contact with the full number and you can enter in "p" there.
I have a contact for my voicemail which dials the voicemail and waits and the pin + #. this works great with voicecommand cause all I have to do is say "call voicemail" and it'll dial, enter in the password automatically and I don't have to touch the phone at all...
Interesting ... I did migrate all my number from my previous phone, where i had the "p" included in the number. The numbers also seemingly came up correctly on the PPC phone. However, when I tried to dial the number, it would not take the complete number with the "p" - I cannot remember exactly what it did, but it did not dial the whole thing. Thats why I thought/ hoped that there is another way. I guess, after what you are saying, I should give it another try ...
And yes, the application that you are describing is very similar to what I want to use. There is a prepaid international call provider, which has a local dial-in number and lets me call abroad for very little money. I call the local number - the service provider recognizes my account by the incoming phone number of my mobile - and then I dial the destination number. For the recognising part however, it is needed that the phone waits a little before it continues to dial the destination number.
Alright, alright .... works! Thx for the assurance! Tried it again and it just takes a lot longer - the pause is longer - than it used to be on my Nokia. Also, I do not hear the dialing tones after the "p" anymore, which probably put me off before.
Thanks! Thread closed
Try replacing the "p" with a "," . It will pause for a few seconds once the other side picks up the phone.
So Ive been using my HTC Ozone (6.5 Standard, 3VO rom) for a while in israel, and the way the cellular network works is as follows:
country code is +972
the number that shows up on an incoming call is 052-555-5555.
The number that shows up on an incoming text is +972-52-555-5555.
The number that shows up on an outgoing call when dialing without the country code (aka 052-555-5555) is +972-052-555-5555.
All of these differences mean that if I have a number saved in the contact manager (in only one of the above forms), it isnt displayed 2/3rds of the time. If i send a text to ME(052-555-5555), the reply comes back from an unsaved number, in a new thread is +972-52-555-5555.
Is there a way for me to just save the base number (052-555-5555), and have the phone's contact manager realize that its the same number is the +92 equivalent? My current workround is saving all the forms of a number to a contact, but 1. its tedium to go through all my contacts and do this, and 2. you can only save so many numbers to a contact, which means im screwed if the contact has two different numbers.
I see all these fields in the "current country" setting, but I have no idea what they mean, or if that is even the solution.
Any help would be greatly appreciated.
hey , i got the same problem on my Omnia 2 with windows mobile version 6.5
The local incoming call won't show the country code, and sms does the opposite way.
check through all my phone setting, can not find any related option for this.
Thanks for anyone can provide a resolution.
i just resolved my problem. hope this way can help you as well.
get a regedit software on your windows mobile phone.
go to HKEY_CURRENT_USER/ControlPanel/Phone
under it, you should able to see a key name "CallIdMatch", change the value to maybe 8 or 9, which means it will match the last 8 or 9 numbers for each incoming call or sms. (use decimal) after the changing, reboot your phone.
Wow, it worked!!
Thanks a lot man!
thanks for the tip jason_ma!
i was also wondering about it.
Anyone know how to edit CalIidMatch an an HTC hero