Hi everybody!
I’ve surfed this forum many times, trying to find topics, where I could get info, such.
What are Radio Rom, Extended Rom, and Extracted Rom?
What they include inside?
To whom belongs files nk.nbf and ms.nbf?
What gives new version, when you do update?
What is Bluetooth version 1.0 ----2.0, is it version of chipset, or is it version of software?
Can you change this version of bluetooth, and a lot of questions, where I can’t find any answers over Word!!!
I have seen many times, instead answers just redirect to old topics.
Where do I know, may be from that time this question about WM5.0 is WORK?
I am myself seen QTEC2020i(XDAIIi) complete with mobile 5.0.
Please, answer how to Search(make sentence) and where(index), or answer to one of the many questions above?
Hi YARMen!
I know the search can be problematic if you do not enter the right keywords and even then it doesn't cover the WiKi which is where you should look for most of the answers.
Here are some quick answers for you:
Radio ROM - The drivers and stuff that control the phone WiFi and BT (all the radio) this is separate from the OS and can be updated by it self.
Extended ROM is a part of the devices FLASH that is hidden (can be unhidden with reg hacks and used to store files so they won't be deleted during hard reset). It is used to store provider customization cabs that install automatically after you hard reset the device.
Extracted ROM is a ROM image extracted from a device. Basically you take all the OS, drivers and stuff and save them to a file on the PC for later use.
To whom belongs files nk.nbf and ms.nbf?
What gives new version, when you do update?
Click to expand...
Click to collapse
Not exactly sure what you mean here. the mbf files are ROM images, and updates are produced by the OEMs. (Original Equipment Manufacturers)
Not sure about BT, but I think it's hardware.
That's it.
radio rom also called radio stack
have the software which also control the gsm/umts phone software
Thank you very much for answers!
Not exactly sure what you mean here. the mbf files are ROM images, and updates are produced by the OEMs. (Original Equipment Manufacturers)
Click to expand...
Click to collapse
When I updated my PDA I used ROM which consisted files ms_.nbf, nk.nbf, and radio_.nbf. I think it get 1, 2, 3 steps to install the softwere.
You can upgrade all of them or just one, moving files from folder, where installer starts.
So I know now what is radio_.nbf, it is radio ROM about that you have told me. Question is what the rest?
And please, if you know, what about version Bluetooth below?
Ok, well nk.nbf is 'main' ROM. It's the OS and hardware drivers for touch screen, LCD etc.
I am not sure but that leaves ms_.nbf to be the extended ROM. I could be wrong though.
Thank you, Levenum.
Good job!
There is a solution of search.
If you want to find exact words or sentences into this forum, or another wiki sites go to Google.com or another search server, put your words in extended search and choose domen(write down) 'forum.xda-developers.com' and etc.
Related
Hi I am new to all this.
I have an XDA EXEC, copied the T-mobile rom all works fine...except thebusual crap GPRS/3G reception.
I was looking at installing WM6 today....
Which file is the best/most stable at the moment there are many threads with many updates etc..
What do I gain by upgrading to WM6..
I am sure I am not the only one to ask this question
I to have an xda exec looking to install WM6 it is an old one from o2 since i only hear new ones can have WM6. So please help me to obatin the right file or rom as people have called it, i have done a search and found a few things related to WM6 but not sure whats stable and right to use before bricking my xda exec.
badman112 said:
I to have an xda exec looking to install WM6 it is an old one from o2 since i only hear new ones can have WM6. So please help me to obatin the right file or rom as people have called it, i have done a search and found a few things related to WM6 but not sure whats stable and right to use before bricking my xda exec.
Click to expand...
Click to collapse
Hi there
If the instructions are followed as written, it would be quite hard to brick your device.
As a start you could try Jwright's WM6 rom version 2.02.02, works great for me & I don't have any wifi bug (I use wifi a lot).
I say it's a good starting point as it is an executable upgrade (make sure to d/l the correct one for your device) just like the OFFICIAL roms, only it installs WM6 instead of WM5.
Download that one and give it a go.
That rom is very simple to install as it is a single executable file, with the whole package contained within.
All I did was
D/L the ROM for my device (jwrights 2.02.02, locate it in the forum).
Unrar it somewhere to my pc.
Put device into bootloader mode (power,backlight & reset) a screen with no backlight appears with the words serial vx.xx (x.xx being your version of the bootloader) you may need a torch to see it.
Connect device via usb.
Execute upgrade (file that you unrared to pc)
Once finished (about 20mins or so), unplug device & perform a hard reset (both softkeys & reset until the white option screen appears) and select "Restore" from the options. I believe it's 0 (zero).
This also upgrades your radio rom to the latest V1.15.
Happy bricking!
OOPS I mean upgrading.
Hello,
i'm new here. I come from the Sony Community. I getting in the next 2 Days my new TyTN II. So, now i've got some questions about making a own ROM. I have read so many Pages, but i can't find a easy step by step Howto. I would like to write a German dummy Step by Step HowTo. But i understand how it works... I would like to take some existing ROM's (expl. the ROM from Sleuth), but i would like to run a german version with my own Tools.
First of all, i would like to integrate a Tool like 'Where is my Phone' in actual German ROM File from HTC. See wimp-software.co.uk. So if somebody steal my Phone, i getting the new Phonenumber and the GPS Position Data with this Tool. I think, this Tool is very nice.
The problem with this tool is, when someone make a Hardreset, the Tool will be removed from the PDA. Now, i would like to integrate this Tool to a selfmade ROM.
Ok, i'm understand, that someone can build his own ROM and if he upload his ROM to the Smartphone, my Tool will be destroy. But this is a other problem.
Now, let me beginning. Which are the best steps to create this ROM based on a German ROM Release? I think there are 3 Ways.
1. Way: I install the newest original ROM from HTC to my Mobilephone. Then i install my Application like 'Where is my Phone' and i make my Reg. Tweaks (expl. GPS Camerafunction). After i have install all the good things, i make a Dump from my Mobile and i create a ROM from this Dump.?!
2. I install the newest German ROM Release to my PDA. I make a Dump. And i extract this Dump in my PC, so i can manually add the OEM Packages and Reg. Tweaks.
3. I search in the internet for a German actually ROM (System and Radio ROM). And i manually add the OEM Packages. and Reg. Tweaks.
Can you help me, and tell me, which version is the best for me? My Target is, when a new version from HTC will release, i can easy add my Tools to this ROM. But for this, i have to know, how it works.
With Sony Erricsson, there was some ROM Updates, which have some security issue. So with a ROM Version expl. higher than 1.90 you can't downgrade or make a selfmaking ROM. Is this possible with a HTC device? So i have every time to check, when a new Release goes Public, if i can make downgrades, changes and a selfmaking ROM? Or is this with the HTC device no problem?
So, which Version does exist?
I found the fellowing ROM Function:
SPL -> ???
SPLASH -> this looks like the Bootup Screenfile
RADIO -> this is the GSM Version
SYSTEM -> This looks like the OS
I hope some nice guys can help me, to make my own ROM Release. If it works, i would like a very easy Step by Step Manual in German, with pictures. So that every one can create his own ROM with his own language.
To prevent new users asking the same questions again and again, i decided to write this little FAQ and introduction about ROM flashing.
To all of you who are new to ROM flashing: Don't mind to ask, we all will help you if possible, but you should understood that it is annoying when the same question is asked 20 times a week. So please first search, then ask. Thank you.
If someone finds an error please do not post it, just send me a pm and I will correct it. Additional FAQ entries will be added regulary. If someone likes me to add a question, please send the question and the answer to me via PM and i will add it asap.
Thank you to the whole community, because without all of your information, this FAQ could not be possible.
If you are new to ROM flashing, please read this thread. It will give you information about your device and a short introduction on how to flash another ROM to your phone.
Below you will find the ROM flashing FAQ and the Introduction to ROM flashing.
Please feel free to add links to this thread to your signature using the following code:
[b][url=http://forum.xda-developers.com/showthread.php?p=1790046#post1790043]ROM flashing FAQ[/url][/b]
[b][url=http://forum.xda-developers.com/showthread.php?p=1790046#post1790046]Introduction to ROM flashing[/url][/b]
Click to expand...
Click to collapse
ROM flashing FAQ
ROM flashing FAQ:
Q: What is a ROM?
A: A ROM contains the operating system and often additional software which can be “installed” to your mobile device. Most ROM’s provided by the chefs (people who create cutomized ROM’s) just contain the operating system and additional applications. Shipping ROM’s (ROM’s provided by the manufacturer or official providers) also contain a Radio ROM and a bootloader.
Please notice: A ROM can ONLY be flashed to a device it is made for.
Q: What is a bootloader?
A: A bootloader contains information about your device. It is quite similar to a computer’s BIOS. Official bootloader also have a security option called CID (Carrier-ID) which allows you just to install ROM’s from the provider of your phone. So, if you want to flash another ROM, you first have to turn off this security option by “CID-unlocking” your device. Check the flashing instructions below on how to do this.
Q: What is a Radio ROM?
A: The Radio ROM contains the drivers for the communication devices of your phone. Some ROM’s need one or more specific Radio ROM’s to work properly. Usually the chef, who created the ROM recommends a Radio ROM. But don’t mind, if your Radio Rom does not match, you can always flash another without needing to flash the ROM containing the Operating System (OS) again.
You can check the version of your Radio ROM when you click Start > Settings > System > Device Information or booting your device (there will appear three lines of red text. The Radio ROM version is the number after the R:.
You can download Radio ROM's at the xda-developers FTP-Server in the Uploads/Kaiser/Radio-Folder. Username and password are both 'xda'. To install it, download, extract and execute it. Then follow the instructions on your screen. Flashing a Radio does not delete any files on your device's ROM.
To choose the perfect Radio ROM for you check this thread.
Q: What means CID(-unlock)?
A: All known providers add a Carrier ID to their devices. This CID is added to prevent a device being flashed with a ROM which is not from the provider and/or not designed for your device. Be sure to brick your Kaiser, if you try to flash a ROM designed for a Wizard.
To flash other ROM's, you have to unlock the CID. If you flash another ROM on a CID-locked device, the new ROM will not work properly.
Q: What means SIM-Unlock?
A: Lots of providers want to bind their customers. So they add a SIM-Lock to their devices with only allows to use SIM-Cards using their networks. If you want to use a SIM-Card from another provider, you need to SIM-unlock your device. This can be done by contacting the phone's provider (paid & sometimes free), using a service like www.imei-check.com, or using Jockyw2001's Kaiser SIM Unlocker.
Q: Can I brick my phone by flashing a ROM?
A: To be true… YES. But if you follow all instructions, it is quite implausible that your device bricks.
Q: Does flashing affect the warranty of my device?
A: Yes, but, as long as your device can be flashed again, you will find some help at jcespi2005's thread where you can find dumped original ROMs.
Q: What can I do, if i gain problems with the ROM i flashed to my device?
A: First of all you should inform the creator by posting in the ROM's thread if the problem is not described yet. Then you should wait for an update/fix or, if the issue is a showstopper for you, try another ROM.
Q: Which is the best/fastest/... ROM?
A: Nobody can answer you this properly. There are nearly daily new ROM's here and everybody has different demands to a ROM. If you want to know, which fits best for you, read the ROM description and try the ROM('s). Only you can decide, which ROM is the best (for you).
Q: I own an AT&T Tilt. After flashing another ROM, my hardkeyboard does not work properly.
A: AT&T uses another keyboard layout than HTC. To fix this, install the tilt keyboard fix.cab. You can download it at Dutty's Kaiser CAB Collection.
Q: What is the difference between a hardreset and a softreset?
A: A softreset reboots your device. A hardreset sets all settings back to the ROM's defaults. All of your data, settings and additionally installed programs will be deleted.
Q: What are *.CAB-files and/or how do i use them?
A: Cab-files for WINCE-Devices are different to the files you may have seen (e.g. on your Windows Installation CD). They do not only contain files but also installation information similar like a MSI package. To install them, just copy the *.cab to your Mobile Device and run it from there. Most shipped ROMs delete cab-files after executing, most cooked do not. To be sure, check the registry. If HKLM\Software\apps\Microsoft Application Installer\nDynamicDelete = 0 (DWORD decimal), cab-Files will not be deleted after execution.
Q: I have questions which are not described in this FAQ. What shall i do?
A: First of all search the forum and the wiki (http://wiki.xda-developers.com). Maybe the question has been already answered. If you don't find an answer, create a new thread. As i know from experience, the community will always try to help you as soon as possible.
Introduction to ROM flashing
Introduction to ROM flashing
These are the steps on how to flash your device the first time:
1: CID-unlock your device by following the instructions at pof's HTC Kaiser Hard-SPL v1 - CID Unlock & Flash any ROM to your device (4 free)-thread
This needs to be done to flash a ROM to your device which is not created from your provider (or HTC if you own a device with HTC branding).
Additionally you may check persianowns Kaiser HardSPL Walkthrough Video.
If you are running in a white screen running HardSPL, please read this thread.
2: Search this forum for the ROM, you like to flash. Then download and, if needed, extract it.
3. Check, if your Radio-ROM matches the new ROM. If you don't find any information in the ROM's thread don't mind. You can update your Radio ROM later if you gain any problems.
4. Make sure, your devices battery status is NOT LESS than 50%.
5. Connect your device to your computer and wait until activesync/Windows Mobile Device Center recognizes it
6. Last chance to synchronize and/or backup files. All files and databases will be deleted after performing the next step!
(Optional: If you want to save your text messages and/or eMails, use a tool like DotFred's PIM Backup.)
7. Execute the .exe file you downloaded with the ROM.
8. Follow the instructions and DO NOT disconnect your device until flashing is finished.
9. Disconnect your device from your computer.
10. You need to delete the old activesync/Windows Mobile Device Center partnership, because it thinks, your device is not the same as before... and it is right ^^. Deleting an old partnership is only possible, if the device is not connected.
(Optional) If you want to change the name of your device, do that now by clicking Start > Settings > System > About > Device ID. Enter the new name of your device and click on Ok.
11. Connect your device to your computer, create a new partnership and synchronize. Then configure your device to your needs and if needed install additional software.
Congratulations! You succeed flashing your device!
Great FAQ....simple, concise, and informative
Well done
Excellent post bmueller77!
This should clear up a bunch of the questions that are asked.
thanks for that
its hard to find some basic info on here like this, so can we please sticky
Really Good Thank you...
Can you please make a general version of it and put it in general wiki so that it can benefit all not just kaiser guys
Although I am more interested in HTC Elf Touch version []
you could add my video to it http://www.youtube.com/watch?v=UaCt5pUn6iI
shows how to hardspl
verysmartncool said:
Really Good Thank you...
Can you please make a general version of it and put it in general wiki so that it can benefit all not just kaiser guys
Although I am more interested in HTC Elf Touch version []
Click to expand...
Click to collapse
Let's see. I am already working on a more general FAQ version including info on Windows Mobile but, to be honest, a general flashing introduction would be much more complicated and i want to make it as easy as possible for newbies.
I think it would be better, if someone grabs this thing and would edit it for another device to keep it concise. If anyone is interested, just ask me via PM and i'll send you the whole including vbCode.
persiansown said:
you could add my video to it http://www.youtube.com/watch?v=UaCt5pUn6iI
shows how to hardspl
Click to expand...
Click to collapse
Got it. Thank you.
I have made this thread a sticky upon request.
I feel that this info should be ported to the wiki so that it can be found and edited by all.
At the momnet we have FAR to many sticky's in this section which makes finding anything hard to say the least.
Have a look at the BA section (in my signature) to see what I mean.
Aright, will add a general version to the wiki at the weekend.
Thank You but still have a question
Hi, I just got my HTC TyTn 2 as a present from my dad he got it from orange and got it sim unlocked for me. But I don't like it because Orange has their crappy stuff on it I wont the original stuff from HTC on it like HTC Home etc. I've got my phones detail in my signature can some one plz help i jus want to know if i can use it on my rom n radio version. Thanks.
thx
Super! Thank you!
this thread is awesome...it really help a newbie like me
the wiki is also very helpful
keep up the good work
I've been flashing ROMs for a long time. There is one thing I don't know. Does anyone know what is the reason behind stopping flashing RadioROMs at 95%? Whatever RadioROM I want to flash to my Vario III (keeping the standard T-Mobile ROM) it stops. In the RadioROM thread, there were several cases like mine. Can it be that for being able to flash another RadioROM you have to flash a custom ROM like Dutty or Schaps before flashing the Radio? I cannot recall such problems with Hermes.
Thanks for the guide. Also am not new to this I haven't done this in a while. ROM Flash went without a hitch. Keep up the good work.
haamedullah said:
Hi, I just got my HTC TyTn 2 as a present from my dad he got it from orange and got it sim unlocked for me. But I don't like it because Orange has their crappy stuff on it I wont the original stuff from HTC on it like HTC Home etc. I've got my phones detail in my signature can some one plz help i jus want to know if i can use it on my rom n radio version. Thanks.
Click to expand...
Click to collapse
So long as your phone is SIM unlocked as in you can use any sim card in it then you flash it exactly the same as described in this thread. I flashed mine no problems. Does that answer your question or are you just wanting the home screen without flashing? If so Im not sure if thats possible, I heard some people say that you can enable it on orange phones but I flashed mine before I ever tried it.
Excellent FAQ!
Now i can get my hands dirty with that so called "ROM flashing" .
noobie question, but how do i install a cab file? thanks
Hi, I have 3 questions:
1) I've looked around a lot, but can't seem to catch hold of a chinese language for my vox...Its called Dopod rom right?? Where can I get the files and instructions??
2) Does a ROM (when dumped) contain absolutely everything that is on the phone and if flashed on another phone will be a "duplicate" of original phone??
3) I've found the wiki on how to dump my rom, but how would I be able to re-flash it onto another phone??
Thanks guys
Wow somebody who actually read the Wiki before posting - nice
1.It's on the ftp. But look at the stuff that is written in the Wiki, about no Wifi and so on.
2.Nope it isn't it's only the operating system and all the software that comes with it! So no contacts or appointments or other files you put on. When you do a hard reset, you would see what all comes with the ROM! (but don't do it, it'll wipe all your data)!
3.You would have to put it into the kitchen and try to cook a new ROM out of the dump, but look around on the ftp first, there are a lot of shipped ROMs, yours is probably there too!
I can't seem to locate the Dopod wiki... But are there ANY ROMs that can handle chinese text without sacrificing the wifi function??
In terms of the shipped ROMs folder - I couldnt find my one and besides, I'd like to have one with all my programs on. So where can I find easy to follow (I'm a newbie on all this) instructions on cooking and creating a ROM??
(Is this thread the right one: http://forum.xda-developers.com/showthread.php?t=337066 ) ???
Thanks for your help
Hi there,
This my first post, so I'll try to be short and to the point.
I just bought an sim-free HTC Radar (7720) from Expansys Japan, hoping to make a present to my Spanish mother. To my surprise, although my Japanese IS12T WP7 had several languages including Spanish, the HongKong market Radar Expansys sold me only has English and Chinese.
Since then I've been desperately trying to get a way to add Spanish display language. Found this thread on xda and thought I was saved.
Being a noob I did read every single post in the 85 pages before trying anything, unfortunately I still can't get Spanish display menu...
Here is what I did:
1) Checked I had latest Zune software (I'm running W8 CP 64bit)
2) Updated the radar up to 8107 through Zune (first 7740, then 8107).
3) Downloaded and installed WP7_update_tool
4) Downloaded and extracted WP7_Update_Cab_Sender
5) Downloaded all the Spanish language update cab files (1 for Nodo, 2 for Mango), and added them to the WP7_Update_Cab_Sender folder
6) Run the bat file, then choose "B" for backup+update
7) After a while, and a few restarts both the Update utility and the phone showed the message "Update successful".
I then went to change my display settings and found out that I still only had English and Chinese available...
Is there something I missed? Do you have any suggestions?
Right now the only thing I can think about is that maybe I shouldn't have used Zune to update. Should I try to roll back to 7740 with Zune, then update to 8107 using the Cab_Sender instead?
Thanks in advance.
Well, I got impatient so just tried to restore to the previous version using Zune...
Tried already 3 times, no particular error messages and everything seems to go fine. Yet at the end I always end up where I was, at 8107...
Am I stucked in here or is there something else I can try?
Any way of getting my phone back to 7720, or any idea of whether that would help me solve my problem ?
Having Spanish support is much more important than getting future updates... so that's not an issue...
CAB-sender takes a backup (technically "restore point") using the same mechanism that Zune does. If you didn't back up your older restore points, they were overwritten.
I'd suggest just flashing a European stock ROM. Here's a nice list of the ROMs for Radar phones: http://forum.xda-developers.com/wiki/HTC_Radar/Shipped_Roms. Make sure the device version matches (i.e. the TMoUS one probably won't work, though I don't know what hardware a Radar purchased by way of Japan will use).
GoodDayToDie said:
CAB-sender takes a backup (technically "restore point") using the same mechanism that Zune does. If you didn't back up your older restore points, they were overwritten.
I'd suggest just flashing a European stock ROM. Here's a nice list of the ROMs for Radar phones: http://forum.xda-developers.com/wiki/HTC_Radar/Shipped_Roms. Make sure the device version matches (i.e. the TMoUS one probably won't work, though I don't know what hardware a Radar purchased by way of Japan will use).
Click to expand...
Click to collapse
Thank you so much for your reply; now:
- I understood what I did wrong (over-write my previous backups when I run CAB-sender...
- Have some hope to get it done.
My hardware is: HTC Radar C110e, but unfortunately I found no file matching my current Firmware/Bootloader:
- Firmware: 1600.2200.20301.708
- RadioSofware: 16.23.03.17_16.27.00.23
- Bootloader: 2.3.160015.3(134621)
So additional questions:
- If I get one of these European ROM's, will I get also the language packs delivered by default in the European region (which include the one I want, Spanish)?
- Will my phone be updatable through the regular Zune channel afterwards?
- Should I rather get the newest, oldest, or it doesn't matter? (assuming I'll get the updates normally)
Your questions, in order:
1. Yes. These are the ROMs which are distributed on retail phones, and should include the standard language set for Windows Phones (which I'm pretty certain includes Spanish for the European phones, although I've never checked).
2. Yes. Flashing a stock ROM will make the phone behave exactly as though you'd bought it with that ROM, and it should work with Zune like any other Windows phone (including being updatable).
3. I suggest going with the newest ROM on that list, because it has the same major version number for its bootloader (2) and same revision version number for its radio (03). This reduces the risk of it not flashing correctly for some reason. That ROM is also 7740, so it will need fewer updates after flashing.
Do keep your restore point handy, in case the flash fails for whatever reason, but it shouldn't be needed. You can try recovering older restore points using the "Previous Versions" feature of Windows (requires Volume Shadow Copy service to not be disabled, and System Restore to be enabled for you user-profile disk and set to backup user files as well as system files).
Flashing a European ROM really seems like the best bet, though. You'll need to start the phone into SPL (bootloader) mode, which I believe requires turning off the phone, pressing and holding the Volume Down button, and turning it on again. You should see a screen with bands of color and info about your SPL in yellow text. At the bottom will be black text saying "Serial". Plug the phone into the computer. It will install some drivers (automatically, on Vista or later; on XP you may need to do this manually) and then the text at the bottom of the phone's screen should change to "USB". At that point, you can run the ROM Update Utility (RUU) that should have come packaged with the ROM image.
Thanks again for your precious help. It seems that's exactly what I need.
Now, sorry for asking again, but after a few hours I still couldn't find a suitable RUU... The links you gave me previously pointed to the ROM images only, any idea of where can I find "the RUU packed with those images"? Or "how to pack them myself"?
I did find a few threads in xda with a link to a RUU (here) , but it's only for the oldest version. Then they provide additional ROM images (.nbh), but it's not clear to me how can I pack those into a RUU.
Finally, I did find this other thread where someone was kind of explaining how to do it, but it seems the OP didn't even get it to work to begin with, so it doesn't feel reassuring...
Any further guidance would be appreciated.
I'm afraid you've reached the limits of my knowledge of such things. The only time I've manually flashed anything, the download came as a packaged RUU "installer" (basically just a self-unpacking archive, so far as I can tell) and included simple instructions for using it. If you tell me what file(s) your download contained, I could try to tell you how to lay them out like my phone has it, but I'm hesitant because I really don't know the intricacies of RUU.
I'm guessing you already checked the Radar forums? Alternatively, if you look at the threads for the other ROM downloads, at least some of them start with RUU and end with .EXE (which is how my download came) instead of starting with IMG and ending with .NBH (my download included some NBH files, though). Maybe grab one of the RUU bundles, run it, watch what files it extracts, and then replace the NBH file with the one you already downloaded? I can't promise this will work, but it's worth a shot.
GoodDayToDie said:
I'm afraid you've reached the limits of my knowledge of such things. The only time I've manually flashed anything, the download came as a packaged RUU "installer" (basically just a self-unpacking archive, so far as I can tell) and included simple instructions for using it. If you tell me what file(s) your download contained, I could try to tell you how to lay them out like my phone has it, but I'm hesitant because I really don't know the intricacies of RUU.
I'm guessing you already checked the Radar forums? Alternatively, if you look at the threads for the other ROM downloads, at least some of them start with RUU and end with .EXE (which is how my download came) instead of starting with IMG and ending with .NBH (my download included some NBH files, though). Maybe grab one of the RUU bundles, run it, watch what files it extracts, and then replace the NBH file with the one you already downloaded? I can't promise this will work, but it's worth a shot.
Click to expand...
Click to collapse
Well, thank you in any case for your kindness and having taken me here.
I think I'm ready to try … Just made up my mind to go in the following order:
1) Give a shot to the original RUU file (even though it has an old build of my phone); then hope that Zune updates come as you said they would (my phone unbranded phone came out of the box with Mango 7720 and it took only a few minutes to get the latest version).
2) If updates don't come, try to modify the RUU file with the newer ROM to see if I have better chance...
I'll be back to report what happened.
Well, I tried both the old and the newer ROMs, and:
- on the good side: my phone didn't get killed in the process
- on the bad side: I get an error message saying "ERROR [294] : INVALID VENDER ID" no matter what...
The ReadMe file says:
One of these error messages will appear when you use the wrong RUU to do the upgrade. RUU will check if the Model ID and Language ID are compatible with the device. Make sure you use the appropriate RUU tool to upgrade.
So I guess I'm slowly reaching a dead end... Someone has any further suggestions???
any updates here ?