Hello
I had HTC Diamond before and now i bought HTC Touch Pro.
It has original O2 rom and I am trying to flash a new one. But I cannot enter bootloader. I did Hard-SPL but since i cannot enter bootloader I cannot check if it was succesful or not. I tried all the button combinations (like vol down + enter + reset etc...) but it was unsuccesfull. And i even tried to copy EnterBootloader.exe to the phone and run it. But the screen just goes black and thats all. And when I was trying to do HARD-SPL the screen also went only black. I never seen the three color screen. Please help me!
Thanks
Moved as not ROM Development.
Well, you're probably doing it wrong. Hold volume down, then soft reset. Keep holding vol down until the tricolor screen appears. Don't hold the reset button down; just push it and release it.
Im doing it right. Im sure
so u re trying to flash via card or not, if you're trying to flash via PC dont forget to connect with active sync before, if you are trying to connect with SD card dont forget to do a clean format of it before
I remembered that I actually had the issue once (no idea why, it only happened on one rom about a year ago). Try doing a hard reset, then go into bootloader (instead of pushing vol up and re-booting). If that doesn't work, then start the boot process, and when it hits the alignment screen, try to go into bootloader.
Dear all,
I have two big problems!
1st on is that my phone HD2 won`t start. It just freeze on the white screen with HTC logo and ROM numbers.
2nd is that when I tried to put it in bootloader mode it won`t go. I tried to press down volume key and power key but it happen`s teh same like in the 1st paragraf.
Can you maybe help me???
Thanks in advance.
take the battery out and do a hard reset. Hold volume up and down at the same time and press power button.
I also tried to do that and nothing happens! It just show`s white screen with htc logo.
My HD2 won't go to bootloader tri color screen when I press and hold the VOLUME DOWN then Press and hold the POWER button, but the phone starts normaly.
I already flashed the HSPL3 and nothing wrong happened. But when I tried to check if the HSPL status, the bootloader don't work.
My HD2 is T-Mobile
rsimiao said:
My HD2 won't go to bootloader tri color screen when I press and hold the VOLUME DOWN then Press and hold the POWER button, but the phone starts normaly.
I already flashed the HSPL3 and nothing wrong happened. But when I tried to check if the HSPL status, the bootloader don't work.
My HD2 is T-Mobile
Click to expand...
Click to collapse
Rsimiao, any luck getting your phone into bootloader mode? I have the same problem.
Have same problem
my hd2 won t go in bootlaoder mode, impossible to see spl and wont be flash by hspl 3
impossible to hard reset it
its saying that sd card fail to copy something
is there a solution ??
no usb loading in bootlaoder
Hi I have problem with loading usb in bootlaoder mode.....
When I turn on the phone everything is ok working fine
I'm trying to put a new Rom but I cant because can not find usb
can anyone help me please.....
Dont go to Bootloader (Tricolor Menu)
Hello HD2 Experts,
yesterday i wanted to reboot my HTC HD2 with Android (SD) on it, and after this it hanging on the HTC logo and cant boot.
It goes only to the MAGLDR but not to the Bootloader ( Tricolor Menu) if i press VOLUME DOWN AND POWER...
I installed via USB FLasher on MAGLDR the Windows 7 Phone and it was working perfectly without problems (Just Wlan/Wifi dont working). After this i tried to install 5 different NAND Android on my HD2 and every of this is hanging on this HTC Logo!!! I am sure that all this 5 were working before this...
My Problems:
1. Cant install (NAND) Android.
2. Cant join to the BOOTLOADER (Tricolor).
3. On WIndows 7 PHone no WLAN working.
I'm done with the nerves!!! Can anybody help me?
Best Regards, Mike
Take bettery out, then try again
it will work
i tried EVERYTHING! but it dont help
and battery too!
Having the same problem I have SPL-3.03 HSPL & trying to downgrade to SPL 1.66 but won't go into Bootloader. I've tried an 8gb, 4gb & now 1gb card the file has been renamed in the root to LEOIMG.nbh but just get the tri colour screen. Pressing reset button & holding end call & Vol down button.
This is the right file to rename from HTC?
_HTC HD2_RUU_Leo_HTC_WWE_1.66.405.2_Radio_Signed_15.30.50.07U_2.06.51.07_Ship
Make sure you are not using the USB cable while trying to enter bootloder. I had the same problem, but once unplugged the cable all was fine.
I'm having a similar problem. I reflashed to the HSPL, no problem. I then used the Rom UPdate Utility, which claimed it had updated my ROM to version 2 (although it took a fraction of the 10 minutes, it said it would). When I now try to boot the phone to install the rest, doesn't matter how much I hold the power key (which I presume is the 'make call' key, as that powers the phone up), it refuses to do anything other than boot to the O2 Welcome screen. I'm noticing the replies aren't very helpful here. Is this what I can expect for the whole forum? As a newbie, I can't make posts on the developers forums, so I can't ask them if they've come across this before. It seems a bit pants, to be honest!
HTC HD2 won`t go in to bootloader mode
Junks666 said:
... now 1gb card the file has been renamed in the root to LEOIMG.nbh but just get the tri colour screen.
_HTC HD2_RUU_Leo_HTC_WWE_1.66.405.2_Radio_Signed_15.30.50.07U_2.06.51.07_Ship
Click to expand...
Click to collapse
Hi Junks,
The THREE COLOUR SCREEN is BOATLOADER this is FIRST BOOT LOADER or (I Think) the name is H-BOOT. You have to correct ROM for HTC HD2, but CMIIW the rom is for HTC HD2 T8585 (WWE) with 516 Internal Memory. Is your HD2 this Model or another Model famous with name TMOUS (T-Mobile Edition) with 1024 Internal Memory. I believed if you still have tricolor screen easier to "wake up" your phone.
Im haveing the same problems please someone help... a Demonoid invite code is all I have to offer here
DJ Legless said:
I'm having a similar problem. I reflashed to the HSPL, no problem. I then used the Rom UPdate Utility, which claimed it had updated my ROM to version 2 (although it took a fraction of the 10 minutes, it said it would). When I now try to boot the phone to install the rest, doesn't matter how much I hold the power key (which I presume is the 'make call' key, as that powers the phone up), it refuses to do anything other than boot to the O2 Welcome screen. I'm noticing the replies aren't very helpful here. Is this what I can expect for the whole forum? As a newbie, I can't make posts on the developers forums, so I can't ask them if they've come across this before. It seems a bit pants, to be honest!
Click to expand...
Click to collapse
Is your problem solved ? Hold power key (Red) (Hang Up key) and Volume Down key simultaneously. what is you see on the screen ? if its three color RGB ... you are safe. I will advise whats next.
cheers up
x1123 said:
Is your problem solved ? Hold power key (Red) (Hang Up key) and Volume Down key simultaneously. what is you see on the screen ? if its three color RGB ... you are safe. I will advise whats next.
cheers up
Click to expand...
Click to collapse
No that is not the problem I can not get into the bootloader at all, I use to do it before, so after trying the vol. Down key I tried useing many other combinations without any luck, its as if the default bootloader is gone!
kris29440 said:
No that is not the problem I can not get into the bootloader at all, I use to do it before, so after trying the vol. Down key I tried useing many other combinations without any luck, its as if the default bootloader is gone!
Click to expand...
Click to collapse
HD2 is most great device. what is actually happened. You can brief here what you did before and some background of your HD2, what u have flashed in and what is inside, the more clue probably will help others to point a good thing for you. If No boot loader is the device totally "death"
x1123 said:
HD2 is most great device. what is actually happened. You can brief here what you did before and some background of your HD2, what u have flashed in and what is inside, the more clue probably will help others to point a good thing for you. If No boot loader is the device totally "death"
Click to expand...
Click to collapse
I usely use SD Builds, but I installed DFT_LEO_MAGLDR113_DAF,HSPL4,MAGLDR_CWM_Recovery_v3.0.2.5_for_NexusHD2_135M,NexusHD2-Gingerbread_V2.7_NAND__Android-2.3.4__update and wifi-calling-htcleo-gb-20110518 ( Yes I just copy and paste the file names lol) My phone was working fine (Not sure about the bootloader/Tri-color screen) untill a few days ago my android build boots in safe mode I did find a remedy for that and thats by pressing and holding the Call (green), Home and Windows keys down while the android boots, but I have to do that all the time now. What I am trying to do is restore it back to fatory settings. Oh yeah BTW the AMAGLDR bootloader dose boot and also CWM Recovery but while In the aMAGLDR I have to hold the back key to press vol. up and down other wise it will keep moveing back to the top of the list (Its been like that sence I installed MAGLDR) but I do not have any problems with the vol up and down key in any other programs. I am also able to use USB Flasher and any other mode besides Windows Mobile Device Center (Windows 7). I also tried gettng into Sync by installing Windows phone 7 (witch installed fine with USB flash (Useing MAGLDR) but not luck with syncing back to WM6.
x1123 said:
Is your problem solved ? Hold power key (Red) (Hang Up key) and Volume Down key simultaneously. what is you see on the screen ? if its three color RGB ... you are safe. I will advise whats next.
cheers up
Click to expand...
Click to collapse
Hi. I've tried that combination of keys & I just get the O2 Welcome screen. The only key combination that works is when I power up with the Vol Down key held. I then get the tri-colour screen.
Don't know if this helps but.....
When I get the tri-colour screen, I have the following text:
PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0X05
CotullaHSPL 0x40
I installed one of Cotulla ROMs but now I want to revert to original ROM. But my Magician now can't enter into boot-loader mode.It starts tetris game instead when tried to enter boot-loader mode. Please help me.
Regards
swap002 said:
I installed one of Cotulla ROMs but now I want to revert to original ROM. But my Magician now can't enter into boot-loader mode.It starts tetris game instead when tried to enter boot-loader mode. Please help me.
Regards
Click to expand...
Click to collapse
I think the way you are wrong in your device hardreset , so that you can not get into the bootloader menu !!!! examples:
Hard reset O2 XDA IIi
1. Press the power button on the device + Camera button, and simultaneously, the reset button .. after go into the boot loader (at the top of the screen are made SERIAL / USB while the display section shown v1.2) you can reflash with a Flash ROM that you want......
Actually Reset is button is kindda stuck inside but it works.Earlier I could enter boot loader just by holding camera and power button but now it's not possible. It means that reset button is working but Cotulla's ROM has over-written my boot loader.
I read some other users saying the same thing i.e. tetris game n all...
Good news, Magician finally entered in boot loader mode. I removed battery for some time and it worked.
Hey there
I have motorola XT502 (z71 variants).. I insatlled Setcpu like application and it stuck. When i pulled out the battery, it wont load. Not in boolooader, not in normal mode. Just stuck on motorola logo. Before this happen, i can boot into bootloader only through rom manager. When i was trying to boot into bootloader through hard key, it stuck. my phone was always stucking thorugh hard keys.
Is my phone bricked?
OK I got it working now. But can't enter bootloader using the buttons (PWR + Volume Up + Camera)
Hello everyone,
Some time ago I've decided to flash a costume ROM on my HTC One S (S4), as its warranty expired. This is my first time doing such a thing to an Android device.
Earlier today, I unlocked the bootloader successfully, flashed Team Win Recovery Project and than flashed the latest snapshot of CyanogenMod 11 by following the steps described in the CyanogenMod website.
After the installation finished, I rebooted the device from the TWRP menu. However, the device did not boot at all.
If I try powering the device on (holding the power button for 2-3 seconds) or try getting to the bootloader menu (holding the volume down and power buttons), nothing happens. Hard reset does not work either: I hold the power button, the soft buttons (back-home-recent apps) blink fifteen time, the HTC splash screen ("quietly brilliant") is shown, and then the phone shuts down again.
* The battery is not drained -- after I installed the ROM, the device had around 90% charge.
* My computer does not recognize the device, so I cannot use adb or fastboot commands. [Obviously, this is not a driver problem -- I used the same computer to unlock bootloader and for the flashing.]
Is my device bricked? If not, is there a solution for my problem?
Thanks in advance,
Yoni
YoniKF said:
Hello everyone,
Some time ago I've decided to flash a costume ROM on my HTC One S (S4), as its warranty expired. This is my first time doing such a thing to an Android device.
Earlier today, I unlocked the bootloader successfully, flashed Team Win Recovery Project and than flashed the latest snapshot of CyanogenMod 11 by following the steps described in the CyanogenMod website.
After the installation finished, I rebooted the device from the TWRP menu. However, the device did not boot at all.
If I try powering the device on (holding the power button for 2-3 seconds) or try getting to the bootloader menu (holding the volume down and power buttons), nothing happens. Hard reset does not work either: I hold the power button, the soft buttons (back-home-recent apps) blink fifteen time, the HTC splash screen ("quietly brilliant") is shown, and then the phone shuts down again.
* The battery is not drained -- after I installed the ROM, the device had around 90% charge.
* My computer does not recognize the device, so I cannot use adb or fastboot commands. [Obviously, this is not a driver problem -- I used the same computer to unlock bootloader and for the flashing.]
Is my device bricked? If not, is there a solution for my problem?
Thanks in advance,
Yoni
Click to expand...
Click to collapse
You may have a chance if you can get into "Bootloader"
Try holding the Power Button and Count to 10 Exactly to power it down and then try Power Button and Volume Down to get into "Bootloader" (Unplug the USB)
If you can get into Bootloader, check if your phone is "S-off". If its "S-on" Then you flash the kernal into the phone..