Hi,
I keep getting this following box (Pocket PC Networking) on my Qtek 9000: "Unable to obtain a server assigned IP address. Try again later or enter an IP address in network settings.
Can anyone help solve this for me? I have cingular 3g sim card on my Qtek 9000. I don't think it is the one causing the problem as I do not connect to the internet with GPRS when I am in Canada. I use it only when I go to the US and it works like a charm. Could it be something to do with the configuration of the gprs for Cingular or with the Wifi? Please help.
Thanks,
Gilbert
Related
I cant figure it out, I just installed the latest v. WM6 Rom (http://forum.xda-developers.com/showthread.php?t=297256)
Internet Sharing via Bluetooth works but... when i start my vpn either via ssl or ipsec (on laptop) NOGO. something is in between dont know what...so workaround:
Internet sharing via USB: the device tells me "connected", the new Network connection in control panel/xp tells me "connected" but there is no Internet connection. I try to ping 192.168.0.1 which it made gateway and this is not found. nothing nada. firewall off. nogo. repair. nogo.
*argh* I realize it are 2 different problem but in short: I can not connect as I usually did under the wm5 dialer (and I miss the status lights).
Anyone has a clue?
Hi !
I have the same problem with the same ROM. I didn't found any solution yet.
I didn't try Internet connection shring with Bluetooth. But your problem sounds as a proxy setting problem on your PDA connexion. You should take a look at those settings...
Let us know if you find anything.
edit :
Finally it's working, I re-installed ActiveSync 4.5 and now it's OK.
I reinstalled activesync, modded down to wm5, then again wm6 ...
and magic usb is working but...
My VPN connection on both BlueTooth or Usb is not working. I use the AT&T client to connect to our network but authentication fails with all vpn servers in the list.
That's a shame because this is really the only basic functionality i need to check my e-mail and stuff "on the road". Hmmm... down to WM5!
Unless someone has got VPN working?
I reinstalled activesync, modded down to wm5, then again wm6 ...
and magic usb is working but...
My VPN connection on both BlueTooth or Usb is not working. I use the AT&T client to connect to our network but authentication fails with all vpn servers in the list.
That's a shame because this is really the only basic functionality i need to check my e-mail and stuff "on the road". Hmmm... down to WM5!
Unless someone has got VPN working? Heres my errorlog:
21:24:55.190 Logon request sent to VPN server 111.11.111.222...
21:24:55.190 Wait for asynchronous action to complete.
21:24:55.230 A VPN logon message 1 was received.
21:24:55.230 Accessing digital certificate...
21:25:00.818 A VPN logon message 2 was received.
21:25:00.818 Negotiating encryption keys with the VPN server (111.11.111.222)...
21:25:02.290 A VPN logon message 3 was received.
21:25:02.290 Authenticating with the VPN server (111.11.111.222)...
21:25:22.349 The VPN logon response was received.
21:25:22.349 The local address is 192.168.1.78.
21:25:22.349 Last login error set to 118.
21:25:22.349 'LogonToIPSecTunnelServer' failed.
21:25:22.349 FSM error in state 'AuthenticatingTunnel'.
21:25:22.349 !Error 118 No response from IPSEC terminator during authentication. (error 118).
21:25:22.349 ---------- Change state to 'BeforeTunneling'. ----------
ah... I have it... stupid me.
sorry. stupid. forgot the checkmark on the authentication tab on the auto-created controlpanel > networkconnections > Windows Mobile 6 Connection > Authentication.
Great!
For reference, using the Cisco VPN client, with Bluetooth and internet sharing, does not work. With WM6, a Bluetooth PAN adapter is created on the PC, and the Cisco VPN doesn't bind to this type of adapter.
Using the same config, but with the USB cable, and the wireless modem, does work.
Unfortunately It does NOT work anymore.
Whatever I try I can not get connection to the Internet
- I start "connect"
- Plugin the usb cable
- The new network connections icon appears under network connections
- It pops up it is connected
- It has an assigned 192.168.0.2
But no internet connection, ping 192.168.0.1 can not be reached, etc...
I turned off the firewall to see if this was the problem. not.
Is there ayone who has got a clue? This is really frustrating.
For what it's worth, I'm using WM6 Black 2.5 on a Hermes (Cing 8525) and I'm able to use WM6 Internet Sharing via BT to connect my laptop to the internet and I am able to use my Cisco VPN client on my laptop to connect to my company's intranet. No problems here so I don't think it's a WM6 problem.... rather a configuration problem... either on your company's VPN concentrator side or your client side.You may want to chat with your IT/Ops dept for configuration settings.
No problems here nither. I use Vista on PC. I need to connect to several networks and just have made some tests. I could reach all of them. The fact is that most of them are built on Draytek routers not Cisco, but they also use IPSec and so on.
Yep I'm having the same problem, my VPN's worked fine with WM5, but went to Black 2.5 and now when I VPN, it connects, assignes me an IP, but wont let me ping the network.
I _think_ it's becuase now the fone shows up as a network rather than a modem, and assigns me a 192.168.0.x address, and the home network is in this too... any suggestions?
share internet connection with ppc
Can i use my ppc as the wireless adapter? do i need to use "wireless modem" or "activesync" to do this? For more detail, if my computer do not have wireless adapter, and now i want to use the wireless adapter on my ppc to connect to the internet. Is it posible?
Hi,
I upgraded to stock HTC WM 6.1 rom. Now when I try to use Internet Sharing I can't connect to internet.
It seems to establish network connect wit the phone and I can even ping the phone IP address, however I can't reach anywhere beyond the phone. Vista network center says that network connection is "Local Only".
I use MediaNet with all proxies disabled.
Any advice?
Thanks
Hmmm... I know there is a driver issue with Vista that affects many connections with both ports & usb from what I've read. Unfortunately I use XP & SLeuth & it works fine. Try searcing google for Vista ICS errors or issues.
Hello,
I have an HTC Kaiser with WM6 on it, and I try to connect to a PEAP secured
network. Every time I connect to the network, I get the message "Cannot log
on to the wireless network. This network requires a personal certificate to
positively identify you." I tried to edit the registry as said here:
http://forum.xda-developers.com/archive/index.php/t-284534.html
but it still doesn't work. Maybe anyone has a solution?
Thanks in advance!
I have migrated from a Nokia E90 to the Touch Pro. I am a veteran Windows Mobile user, ever since the days of Windows CE, through Pocket PC 2003, 2003SE, 2005 and WM5.
I have a problem - I would like to use Bluetooth DUN to connect my laptop to the net. I used to do this with my Nokia E90 using *99#, so I know my phone provider will provide it. I can connect successfully using Internet Sharing over Bluetooth, but not using Bluetooth DUN. I get error code 678. I need to use Bluetooth DUN as I need to keep use the Bluetooth PAN on the laptop available to connect to my main computer.
Has anyone successfully connected via Bluetoot DUN yet? COuld you try it and let me know?
I've got the same problem. Fine on all previous phones. Now this one gives me this error.
Anyone solved it?
LLOYDY
Hi Guys!
Can you help with this problem? I've got this same issue. It's really annoying. I Can't also set up bluetooth connection between TP and my PC (Windows Vista).
Any idea?
See whether this can help.
http://www.windowsmobilecool.com/20...ows-smartphone-to-a-windows-pc-via-bluetooth/
My TP can do the BT DUN from my notebook now, but the problem is that it will disconnect after a short while. I am still trying to find out where is the timeout settings.
I did not look at the link but it looks like you guys have missed the apn information out of your extra initialisation commands for your modem
Ice_coffee: 'apn information out of your extra initialisation commands for your modem'
Can you provide those info ? And where to use it ?
I think this URL provide more detail, it works for me.
http://www.ppcsg.com/lofiversion/index.php/t94416.html
Go to the Device Manager, select properties of the Bluetooth Modem, click on the Advanced tab, paste the following string on the Extra initialization commands:
AT+CGDCONT=1,"IP","internet",""
Try to establish Dial Up again, use the following for the dialup dialogue box,
User name: Your Mobile No. [eg. 6591234567]
Password: 65IDEAS [I used this for Singtel]
Dial: *99#
This settings works for me.
excellent instructions here
http://www.filesaveas.com/gprsconnect.html#laptop
including pictures, showing just which settings need adding on your laptop, just copy and paste the gdcont info into the setup screen for your htc usb modem, as per the instructions, you will have to change the apn to the one for your provider.
Vodaphone = internet
O2= mobile.o2.co.uk
t-mobile = general.t-mobile.co.uk
Hi,
At my university they have WiFi in all the buildings.
I can connect to the modem without a problem, but to have acces to the internet I have to connect through VPN otherwise it won't let me browse the web.
So I go to Settings>connections>VPN and I put all the data in it like pptp,username,pass and server, I don't know what I have to chose for 'Make connection from (internet, work, mss, wap, ipaq wap)... and Make connection with(internet, work, mss, wap, ipaq wap)..."
My question is how can I activate that VPN setting?
I connect to wifi but there is no such thing as launching the vpn settings in it...
Plz help, thx!
grtz