Hello,
I want to install apps into my SD card but one thing I don't know what to do is how on earth I select a specific folder where I want to install it?
I don't like having programs installed in the root sd folder I want it to be more like:
/storage card/programs
I use Dell Axim X30 with Windows Mobile 2003 SE
I heard that it can be tweaked with Resco Registry Editor but what do I have to do??
Help please ! :roll:
HKLM\SOFTWARE\Apps\Microsoft Application Installer
find a Key fAskDest and change it's value from 0 to 1.
Alternatively you can also use this great program if you're installing directly from your SD Card
It's called CabInstl
download it from here:
http://www.freewareppc.com/utilities/cabinstl.shtml
thanks alot everything works I managed it to work using reg tweaking but it still doesnt see al folders in my sd card. I created a folder Programs and I couldnt see it till i moved it to another folder "My documents" which is located on my sd card as well. wtf?!? :?
Hi Bro,
I need some advice on O2 mini as my SD card is not working good.
Before I started my Rom experiment, the SD was working good with both the magician and my laptop.
I made a mistake and I did not backup my rom before I start flashing.
After changing to my new rom, seems like I cant inter-use the SD between my laptop and magician. The magician cant read anything from the SD if I put data into the SD from my laptop via SD card reader/writer. When inserted to the magician, it will prompt to reformat. The same thing happen when I slot in the card to card reader after writing something from magician.
Therefore, now, I cant use SD to update rom ect.
How can i solve this problem? Thanks
Russ
Have you already tried formatting the SD card? When an SD card is used for ROM upgrading the card becomes totally unreadable for both PC and Magician.
Zerimar,
I did reformat of the SD on my laptop before writing the image to the SD via ntrw.
However, after slotting back to Magician, then go to Bootloader mode and wait for the "start loading prompt" but that have not happen yet.
russ
I think I misunderstood you, sorry. Put the Magician into bootloader mode first then insert the SD card. It should then display the message asking you to press the Power Switch to start the upload.
Thanks for your reply dude,
I've tried that too. It does not look promising.
I hope there is nothing wrong with my sd slot in the magician and i dun think there is any hardware problem. I confirmed that the Image was written in the SD.
Initially the SD card was working well with the magician before i did any rom flashing myself. even with the 1.12 WWE rom i cant read the SD. I've tried to reformat using XP on my laptop, and put back to magician. Then the magician will prompt to format again. else i cant see the storage card in the file explorer.
I've tried:
1) Slot in SD and wait - DUN WORK
2)Slot in SD, disable Async USB, and slot in use to Magician and wait. -DUN WORL ALSO
3)Slot in SD, press camera, on/of, and reset and wait till the SD load screen- ALSO DUN WORK.
4)Go to Boot loader, the slot in SD and wait- ALSO DUN WORK
5) No more idea
I wonder if different rom version will not work with certain sd brand.
My details is : 1.12 WWE with big storage.
SD : Kingston 256MB
I've tried with 1.13 WWE also but the same problem.
Hope someone can help or anyone have the same problem before?
Hello, Try this one
I think if you get problem with the SD card, you can use Mr. OLTP ways.
First open this :
http://wiki.xda-developers.com/index.php?pagename=MagicianRomUpgrade
then
downloadls all the tools you need, from the site.
1. Unzip NL_11300_131_11200.exe (or any other shipped-rom) to get all the .nbf & enterbl.exe . click right your mouse and chose extract to NL_11300_131_11200\
then you must copy all the file from NL_11300_131_11200 folder to c:
ex: c:\temp (make a new folder "temp", and copy the file from the NL_11300_131_11200 folder).
2. Put NBFDEC in the same directory = open nbfdec folder, you will find release folder in there, open the relase folder and copy 2 file to c:\temp.
3. open the temp folder and find getdevicedata.exe, Copy the getdevicedata.exe to your Magician and execute it (it will not provide any gui displays or feedback whatsoever), open the windows in my device(in your PDA), search for getdevicedata.txt. then copy to your desktop, and open with notepad.
4. To decode nk.nbf -> nk.nb1 start a command window, go to the directory where you stored nbfdec & the other files & type: nbfdec -d nk.nbf nk.nb1
this isi the ex:
in cmd
c:\documents and settings\frans>cd c:
c:\documents and settings\frans
c:\documents and settings\frans>cd ..
c:\documents and settings>cd ..
c:\>cd c:temp
c:\temp>nbfdec -d nk.nbf nk.nb1
this will convert nk.nbf to nk.nb1
don't close the CMD windows
now open the Hexeditor (must use the newest version V3.x)
open file/nk.nb1
then klik replace button , in the upper insert 02 00 00 80 00 20
in the lower 02 00 00 b8 01 20
replace all, enter.
save file in same name.
then back to the CMD window
c:\temp>nbfdec -e nk.nb1 nk.nbf
and
close the CMD windows.
open the temp folder, plug your PDA to USB,
On your PDA press power,camera and reset to bootloader mode.
clik maupgradeut_noid.exe on the temp folder.
and follow the instruction. if shows error 120. repeat again clik maupgradeut_noid.exe this will start to instal your OS
FINISH
thanks to MR. AMPDA, MR. OLTP and Mr. SEAN
for helping me.
Pls follow the guides on the board a little more carefully! Mine is very good ;-)
When you dumped your rom image on your SD with your magician, you completely destroyed the MBR of the SD. Before you save the image to your laptop with ntrw, your laptop will want to format it, cause it can't unserstand the car
. Don't do that. just put it in your cardreader & back it up with ntrw. Then you can write back another image to the card with ntrw & put your card in your magician. Just as long as you didn't format the card in between the operations the bootloader will recognize the image on the SD by the word magician which must be the first thing it reads on the card. If there's a mbr instead of the word magician, no mather what the bootloader will not present you the image 'press power to flash'
Hope you understand know how to solve your 'problem'
M
Hello yeoruss,
did u actually fixed the problem with using the sdcard on notebook and ppc at the same time? Ive the same problem after storing my ROM on SD.
I simply cant use the card in both units. When i format it under windows, is works in Windows but not on PPC - The PPC asks to reformat the card to make it readable.
When I format the Card on PPC, it works there, but no more in Windows.
Im experimenting all the time but i cant see the solution
Edit: I did not changed the ROM on my Magician, i just tryd to backup my current ROM.
Thank u
Tested on FS Loox N560 and N520
TT6:
http://rapidshare.com/files/15367290/TT6.030build8320.rar.html
Unzip the files and copy all to SD card root. Using card reader is advised. After copying, just put your card back to your PDA and do a soft reset (reboot). If it does not install automatically, locate 2577 folder and tap ttn.cab and follow instructions.
GB Map:
http://rapidshare.com/files/15373661/TT6v660.1199_United_Kingdom_and_Republic_of_Ireland_.rar.html
hey could you pls reupload tomtom? link is not working thx
whats the difference between this version and 6.029?
I have red similar post
http://forum.xda-developers.com/showthread.php?t=298646
wich explains how to put mail and attachments on sc
to be little more precise what i have done:
1. edited registry:
HKLM\System\Inbox\Settings
1.1 adding PropertyPath value "\Storage Card\Mail" string
1.2 adding AttachPath value "\Storage Card\Mail\Attachments" string
2. restart
3. found new folder on device named Storage Card and my real storage card named Storage Card2
4. shut down device
5. removed Storage Card
6. renamed Storage Card folder on device to Storage Card.bak
7. shut down
8. put the card in and turn on
9. i found new foder on device named Storage Card besides Storage Card.bak and my card named Storage Card2
what am I missing please help
Qtek 8310 WM6
PS: if no one nows how to solve this problem at least try to help me with deletnig renamed "storage card" folders that were auto created after restart...
they contain system folders and take up memory
I have the same problem... Is there any solution?
I am having Tilt (HTC 8925) and having the same problem. does anyone have the solution?
It seems that there is no solution to that problem...
I'm experiencing the exactly same issue !
I just got an old Palm 750 for ATT that I used successfully with my sim card... but it came with WM5, and I wanted to update it to WM6 (ATT 2.25) ... seems simple, right?
Well, after finally finding the update (not so simple, due to Palm and MS being pissy at each other) I tried to run the update... the only problem is, the phone says it already HAS 2.25 on it... and when trying the usb updater, it goes for about 10 seconds, says you already have 2.25 on it, and exits...
So, any ideas about how to get the darn thing to load WM6.x on this thing? My other problem is I don't have a mini card right now, I only have an 8gb Micro (from my old centro).
The other thing is that it would NOT sync at all with my Win7 x64 Ult machine, but does fine with my XP netbook... not a biggie, just a pain... I'm more concerned about getting the final updated WM6.x on this thing.
Thanks in advance. I appreciate any help.
Before flash:
http://forum.xda-developers.com/showthread.php?t=334100
After that you can use any RoM. No need of ATT.
mangatron said:
Hi, you don't need to flash WM5, I always Flash WM6 and then my WM6.5 ROM. I recommend you flash this:
Treo750_2_27_ROW_EN_DesktopUpdater
You can flash using USB or Mini SD card. Here's how:
1. Open the DesktopUpdater .exe file in either Winrar or 7-zip.
2. Extract the "CHEEIMG_FW.nbh" file to a Folder.
USB method:
-Rename "CHEEIMG_FW.nbh" to CHEEIMG.nbh
-Copy the RUUWrapper.exe file to where you extracted the CHEEIMG_FW.nbh file.
-Run RUUWrapper.exe
-Plug in your Treo, and let it connect to WMDC, no partnership is required.
-Then follow the steps in RUUWrapper.exe.
Mini SD method:
-Format a non-SDHC Mini SD card to Fat32
-Copy CHEEIMG_FW.nbh to the Mini SD card.
-Rename it to CHEEIMG.nbh
-Remove battery from Treo, and insert the Mini SD card.
-Hold the side button (below the volume buttons) and insert your battery.
-Press Power to flash
Hope it works for you!
Click to expand...
Click to collapse
You can find this rom here:
rapidshare.com/#!linklist|PJNMEM|||
You MUST Sync!!!! I do use W7 64 ultm and it works. reinstall it(the WMDC i mean).
Also search for this file:
drvupdate-amd64
This is an update to WMDC to Vista and W7 64.
After update to WM6 you can try any custom WM6.53 of the development area. Try the Hermann one.