Here's another program in the style of RingtoneX and Caller-ID.
Magician users might already know it, because I started telling about it here. But I think it's a bit too well hidden there, and I'd like to know if it works on other devices as well...
Ringtones seem to work fine on MDAc with a reasonable number of contacts, while I've got a feedback it doesn't work on an MDA II with over 500 contacts. I don't know whether it's because of the device or the number of contacts, so just try if it works for you, and give me some feedback...
SMS notification sounds should work on all devices, but it might need a soft reset to activate the messaging plug-in. This plug-in can be used by other programmers as well: If you create a registry key with <window title>=<window handle> (as DWord) in HKLM\Software\Mort\SMSNotify\Windows, you'll receive a WM_COPYDATA with a string containing "SMS\n<sender>\n<text>" whenever an SMS comes in...
Oh, btw: As all my other programs, this will remain free, but I gratefully accept PayPal donations to [email protected]...
Hi Mort,
would you be so kind to upload some screenshots of your application? I would like to see, how the program's gui is done.
TIA,
BGK
Here you are...
Don't expect too much, it's been made to work for me, not to look pretty...
The call and sms popups are not modified, i.e. the one of Windows is used. I only replace the registry entry for the ringtone resp. sms notification sound...
Your App is great! Are there any changes to Ver. 0.5?
Bubisch said:
Are there any changes to Ver. 0.5?
Click to expand...
Click to collapse
The SMS sound is reset a second after the notification was handled and on exit, so it won't set the most recently used one as default on next startup.
Addionally, there are now three "pseudo" categories for all other numbers: contacts without assigned number (either direct or by category), unknown numbers, and calls with supressed numbers. The sounds for these categories are set to the currently used ones as defaults until the category settings are saved.
Mort, you are just GREAT!
Thanks 8)
It is really amazing specially changin SMS tone :shock: .... Keep it up.... I hope if you could....:
- Include all rings under Windows folder and sub folders cause there is no need to copy all tones in /Windows to /Windows/Rings...
- The ability to set Tones in Storage Card.
- The ability to listen to the Tone before setting it.
- The ability to view the Recent Caller Name not only number...
I will keep testing it and let you know ASAP ... Waiting for your next release , do not be late :wink: ...
alkandery75 said:
It is really amazing specially changin SMS tone :shock:
Click to expand...
Click to collapse
In fact, the SMS tone even was more easy to achieve...
- Include all rings under Windows folder and sub folders cause there is no need to copy all tones in /Windows to /Windows/Rings...
- The ability to set Tones in Storage Card.
Click to expand...
Click to collapse
Both of this is not possible as such, because the Windows call program doesn't support paths in the used registry values. (That's why RingtoneX copies the files of other folders to \Windows\Rings...)
But can can modify the path for the ringtones in the registry. It's stored in the Value "Directory" of HKEY_CURRENT_USER\ControlPanel\SoundCategories\Ring. MortRing uses this value, too (because I use \Storage\Ring).
But currently, MortRing will list ALL contained files of this directory, as I didn't want to limit it too much. Thus, setting it to \Windows would make choosing a ringtone taking quite a while...
The ability to listen to the Tone before setting it.
Click to expand...
Click to collapse
Currently, all I could do would be opening the file, so it's played by WMP or the "Pictures" application (which also plays MMF, MID, and some other audio codecs...). I don't know of a simple way to play anything but WAV directly in my app.
- The ability to view the Recent Caller Name not only number...
Click to expand...
Click to collapse
Technically, that would be no problem, but I think the default "missed calls" list is far better for this. The output's mostly for debugging reasons anyway...
Guys, the most sophisticated gadget I ever had prior to owning the Magician is a Sony Ericsson P800. Judging by how confused I am with the Magician's set message alert tone / ringtone capability as it is now, kindly explain, as you would explain it to a child, how Mort's program works.
Thanks!
casper131 said:
Guys, the most sophisticated gadget I ever had prior to owning the Magician is a Sony Ericsson P800. Judging by how confused I am with the Magician's set message alert tone / ringtone capability as it is now, kindly explain, as you would explain it to a child, how Mort's program works.
Click to expand...
Click to collapse
After installation, the program's in the autostart folder. After a soft reset, you'll see a tray icon that looks like a cell phone.
If you tap this icon, a popup menu appears. The most important entries are "Contacts" and "Categories".
In "Categories" you can assign ring- and sms tones to the contact categories. If a contact has multiple categories, the order of the list in this dialog is used. I.e., if a contact has both "Private" and "Friends", it will take the "Friends" settings if it's in the list prior to "Private".
In "Contacts" you can assign ring- and sms tones to single contacts, thus overriding the category settings. The currently used category ringtone (or "*other contacts*") is shown there if no specific contact ringtone is set. To remove a contact ringtone (and this way restoring the category setting), press the fitting "X" button ("X"=remove). It's only activated if a contact ringtone's assigned.
Its really a great program, very simple to use, and not complicated at all 8)
Thanks for the great work, Mort
What you've done is really something cool 8)
Hmmm so after 500 contacts we should start deleting HAHAHHA I think this is not such a big issue and with your skill you'll probably figure it out. So the best of luck Mort. Great App... BTW I am using v0.5d with 445 Contacts
Hey Mort
This is a great program.
I am using it on my XDA Mini and it's so much better than the CallID program that comes with the phone.
Good work.
Mort you are great.
I now use this, MortSaver and MortPlayer!
Whats the latest version of MortSaver by the way?
Timmeh said:
Whats the latest version of MortSaver by the way?
Click to expand...
Click to collapse
b32.
It now uses the SMS notification of MortRing, which should improve stability in this area a lot...
Mort,
Great idea, and certainly easier to use than Photo Contacts. Only issue I've noticed on my Mini is that MortRing does not show certain people in Contacts list (in MortRing), and the ring tone seems to be incorrect during the call (it uses one a few categories down), whereas it is correct in the Contact list. I have under 300 contacts, but some may have multiple entries, which may cause it to exceed 500 I suppose.
Any fixes?
BTW, you don't by any chance have an offspring named Susan, do you?
PH said:
Only issue I've noticed on my Mini is that MortRing does not show certain people in Contacts list (in MortRing),
Click to expand...
Click to collapse
That's strage... Are they shown if you "Search" them?
and the ring tone seems to be incorrect during the call (it uses one a few categories down), whereas it is correct in the Contact list.
Click to expand...
Click to collapse
If the correct one is shown in the "Recent call" message of MortRing (popup menu), it's probably the timing problem. I don't have a good and working solution for that currently... It seems like the only way would be to kill and restart the system's call program, but that's quite risky - if something goes wrong, you won't notice the call at all...
BTW, you don't by any chance have an offspring named Susan, do you?
Click to expand...
Click to collapse
Not in RL...
hey is it possible to update this program so it does not unload itself from memory everytime i launch another program or run a backup (stop processes option is turned off). having to restart the option manually is frustrating.
i have a PDA2K with 30 MB free with Rom 1.40
Eddieh31 said:
hey is it possible to update this program so it does not unload itself from memory everytime i launch another program or run a backup (stop processes option is turned off). having to restart the option manually is frustrating.
Click to expand...
Click to collapse
In theory, it shouldn't be stopped as it is. Either something's going wrong on your system, or your free memory is very small...
Are you sure it's really unloaded? Hidden windows aren't shown in most task lists. As long as the tray icon is visible and works, all is fine...
Anyway, here's a version which ignores WM_CLOSE, which should help in most "automatically closed" cases.
It also includes another approach to use lineSetAppPriority. Please tell me whether it works or if you get additional "unknow" entries in the call history again...
Mort said:
PH said:
Only issue I've noticed on my Mini is that MortRing does not show certain people in Contacts list (in MortRing),
Click to expand...
Click to collapse
That's strage... Are they shown if you "Search" them?
Click to expand...
Click to collapse
Yes, they show up in a search, but not in list.
Mort said:
and the ring tone seems to be incorrect during the call (it uses one a few categories down), whereas it is correct in the Contact list.
Click to expand...
Click to collapse
If the correct one is shown in the "Recent call" message of MortRing (popup menu), it's probably the timing problem. I don't have a good and working solution for that currently... It seems like the only way would be to kill and restart the system's call program, but that's quite risky - if something goes wrong, you won't notice the call at all...
Click to expand...
Click to collapse
No, the recent call list the wrong tone as well. The funny thing is that it's a tone that is use for a totally different category; if it had not been recognised, it would have played a different tune.
Is there any program which allows you to edit a number to be dailed such as adding a prefix in WM5? Also, is there any program allows you to edit those number in "call history"?
the dailing program in O2 XdaIIs are very useful and quite complete. is there any third party who can provide similar program?
Your heading is slightly misleading. You're looking for a dialer *editing* program.
And the short answer to your questions is no, not at the moment.
I'd assume a utility to edit the dial history isn't too difficult, but I can't understand why you'd want that. You dialed a number, so that's what it displays. Now you want to change that? Why? It's history. It's done. Why change the record?
As to the "program which allows you to edit a number to be dailed such as adding a prefix", nope. I assume you mean enabling scrolling left and right within the typed number to change something.
That's much more difficult, as it would entail writing a program that would sit on top of the Dialer (replacing Intellidial, for a start), enabling the dialer editing
Have you tried the WM5 version of Photo Contacts Pro?
Hi Guys,
I was just wondering if anyone can help, I have a o2 Xda Orbit but at the moment it displays numbers from the sim aswell as the xda in contacts. Is there a way of getting to disply the numbers just from one area?? On Nokia phones you always had a option but I can not seem to find one the xda, please help
Hammer
does anyone have a clue how to do this????????
i have the same problem is well i have a hermes
but on the phone list is showing names only but i need to see the number is well on the list
is any one have any clou about it to make name and number on the contack list as like i nokia phones.
i saw iphone contact list program but i dont like to use anather program for it is that any reg setting or alternatif thing we can do.
whit many thanx to xda
Get SKtools, will do all you wishes
to show only the sim contacts you will need to change registry entries as shown below using a registry editor
HKCU - control panel - phone create new dword -> showsim with value 0
change value to 1 to show sim and contacts.
in your contacts options you can choose to view names only, or names and numbers by unchecking the box
rgs
Hi
I couldnt find anywhere, i thought this question was ovious.
in my sim card, i have contact name mark with /m or /h or /w for mobile, home, and work. for exemple ''Jonh/m'' means jonh cell phone.
and i have some thing like this
jonh /h 514-248-4535
jonh /w 514-234-7854
Jonh /m 514-234-5665
when i tranfer it to my phone, it have exactly the same structure.
There is some way to merge it togerter under the same name with different categories for mobile and work and home number and so on?
one other thing is how to hide SIM contact, beacause once you have transfered your contact list to your phone, in contact list of the phone, it showed duplicated contact.
sorry for my english.
thank.
Any one?
Do i in the wrong forum or section?
NO, SIM Contacts are basic information, it would serve you better to just add your contacts using outlook if you have it, back up your outlook contacts any time you make any changes.
If you don't have outlook, PIM Backup works well for managing your contacts from the phone, just dont restore a backup from PIM and then try syncing with outlook that is already populated, you will get double listings, use one as your primary and the other as an emergency if you use both.
You can hide SIM contacts useing a tweak tool, kaiser tweak unfortunatley has to be adjusted after each reset for that setting. There is another tool similar that does work even after resets, just becareful using it on a kaiser, I ran into some sereous crashes adjusting things that varied in the kaiser with it, Unfortunately I cant remember who made it (Dutty tends to load it up in his roms)
Another option is to use a contact replacement program, I use "Finger Fiendly Friends", it filters out sims, I think Pocket CM filters them also. iContact at this time does not.
I hope this has answered your questions.