Related
I cant figure it out, I just installed the latest v. WM6 Rom (http://forum.xda-developers.com/showthread.php?t=297256)
Internet Sharing via Bluetooth works but... when i start my vpn either via ssl or ipsec (on laptop) NOGO. something is in between dont know what...so workaround:
Internet sharing via USB: the device tells me "connected", the new Network connection in control panel/xp tells me "connected" but there is no Internet connection. I try to ping 192.168.0.1 which it made gateway and this is not found. nothing nada. firewall off. nogo. repair. nogo.
*argh* I realize it are 2 different problem but in short: I can not connect as I usually did under the wm5 dialer (and I miss the status lights).
Anyone has a clue?
Hi !
I have the same problem with the same ROM. I didn't found any solution yet.
I didn't try Internet connection shring with Bluetooth. But your problem sounds as a proxy setting problem on your PDA connexion. You should take a look at those settings...
Let us know if you find anything.
edit :
Finally it's working, I re-installed ActiveSync 4.5 and now it's OK.
I reinstalled activesync, modded down to wm5, then again wm6 ...
and magic usb is working but...
My VPN connection on both BlueTooth or Usb is not working. I use the AT&T client to connect to our network but authentication fails with all vpn servers in the list.
That's a shame because this is really the only basic functionality i need to check my e-mail and stuff "on the road". Hmmm... down to WM5!
Unless someone has got VPN working?
I reinstalled activesync, modded down to wm5, then again wm6 ...
and magic usb is working but...
My VPN connection on both BlueTooth or Usb is not working. I use the AT&T client to connect to our network but authentication fails with all vpn servers in the list.
That's a shame because this is really the only basic functionality i need to check my e-mail and stuff "on the road". Hmmm... down to WM5!
Unless someone has got VPN working? Heres my errorlog:
21:24:55.190 Logon request sent to VPN server 111.11.111.222...
21:24:55.190 Wait for asynchronous action to complete.
21:24:55.230 A VPN logon message 1 was received.
21:24:55.230 Accessing digital certificate...
21:25:00.818 A VPN logon message 2 was received.
21:25:00.818 Negotiating encryption keys with the VPN server (111.11.111.222)...
21:25:02.290 A VPN logon message 3 was received.
21:25:02.290 Authenticating with the VPN server (111.11.111.222)...
21:25:22.349 The VPN logon response was received.
21:25:22.349 The local address is 192.168.1.78.
21:25:22.349 Last login error set to 118.
21:25:22.349 'LogonToIPSecTunnelServer' failed.
21:25:22.349 FSM error in state 'AuthenticatingTunnel'.
21:25:22.349 !Error 118 No response from IPSEC terminator during authentication. (error 118).
21:25:22.349 ---------- Change state to 'BeforeTunneling'. ----------
ah... I have it... stupid me.
sorry. stupid. forgot the checkmark on the authentication tab on the auto-created controlpanel > networkconnections > Windows Mobile 6 Connection > Authentication.
Great!
For reference, using the Cisco VPN client, with Bluetooth and internet sharing, does not work. With WM6, a Bluetooth PAN adapter is created on the PC, and the Cisco VPN doesn't bind to this type of adapter.
Using the same config, but with the USB cable, and the wireless modem, does work.
Unfortunately It does NOT work anymore.
Whatever I try I can not get connection to the Internet
- I start "connect"
- Plugin the usb cable
- The new network connections icon appears under network connections
- It pops up it is connected
- It has an assigned 192.168.0.2
But no internet connection, ping 192.168.0.1 can not be reached, etc...
I turned off the firewall to see if this was the problem. not.
Is there ayone who has got a clue? This is really frustrating.
For what it's worth, I'm using WM6 Black 2.5 on a Hermes (Cing 8525) and I'm able to use WM6 Internet Sharing via BT to connect my laptop to the internet and I am able to use my Cisco VPN client on my laptop to connect to my company's intranet. No problems here so I don't think it's a WM6 problem.... rather a configuration problem... either on your company's VPN concentrator side or your client side.You may want to chat with your IT/Ops dept for configuration settings.
No problems here nither. I use Vista on PC. I need to connect to several networks and just have made some tests. I could reach all of them. The fact is that most of them are built on Draytek routers not Cisco, but they also use IPSec and so on.
Yep I'm having the same problem, my VPN's worked fine with WM5, but went to Black 2.5 and now when I VPN, it connects, assignes me an IP, but wont let me ping the network.
I _think_ it's becuase now the fone shows up as a network rather than a modem, and assigns me a 192.168.0.x address, and the home network is in this too... any suggestions?
share internet connection with ppc
Can i use my ppc as the wireless adapter? do i need to use "wireless modem" or "activesync" to do this? For more detail, if my computer do not have wireless adapter, and now i want to use the wireless adapter on my ppc to connect to the internet. Is it posible?
HI all,
I'm experiencing the following problem with my Cruise.
When having the Cruise connected to my PC through USB cable (Activesync on), mobile applications other than IE cannot access the Internet.
My configuration is:
on ActiveSync
my computer is connected to: "work network"
on the Cruise
start > parameters > connections > connections
advanced tab > network selection is set to work network for both types of networks
proxy configuration on the other tab is the correct one for my network
The only application on the Cruise capable of connecting the Internet with this configuration is IE: when starting, it asks for proxy username & password and pages are loaded correctly.
Any other application (the HTC today screen, when looking for the meteo data, Opera, QuickGPS...) do not arrive to connect the Internet falling in timeout (no request for proxy authentication).
Of course, at home (ActiveSync configured as connected to the Internet) everything work fine and all applications connect to the Internet w/o problems.
Any idea?
Thanks
Hi all.... ive got pretty much the problem? Any solutions guys??
Pretty much same here, except for QuickGPS... it manages to connect somehow.
it works for me, but without proxy...
Maybe this would help you?
Hey Wis38!
Just try to open the following ports ins your proxy:
990 (RAPI)
999 (Status)
5721 (DTPT)
5678 (Legacy Replication)
5679 (Handshake & Legacy Replication)
26675 (Airsync)
For further informations try the MS kb259369 and kb904667.
btw, good luck
Frank
Yeah, thanks.
But I'm not proxy administrator, and can't open those ports...
Any other ideas?
Ask your admin
Hmm...
I think then you have to ask aour admin...
Frank
try this
I had the same problem
you can try this
http://www.mobilitysite.com/boards/activesync/137666-fix-unknown-error-0x80072f78.html
How can I use my Polaris like USB modem to connect Notebook on internet.
Is there some application or something like that?
Thanks.
try this one
on your device, go to start menu > programs > internet sharing
choose which connection you want to use (USB or BT) then press connect
if you choose USB, plug the USB cable to both PC and device immediately after connetion established.
if you choose BT (you have to make sure that your device have been paired to the computer), connect to your device through BT network access
in internet sharing mode, all activesync connection will be disconnected
there is a registry hack for windows to fix this issue, but normally the issue also effects syncing. But the bad news is that itsmore then likley that your network admin has locked down this type of access.
only IE keeps working via proxy.
Other 3rd party apps seem to prefer a direct connection ignorinng how windows settings are actually used to reach the Internet
I have exactly the same problem: IE can reach the Internet via the proxy in our work network and other apps like QuickGPS cannot.
Strangely enough this happens only with my HTC Touch cruise and does not happen with my Fujitsu Loox N560, which has exactly the same settings.
I have to note that I upgraded recently to WM 6.1 on the TC and that with WM6 it used to work
Any ideas
same problem for me... (qtek S200 & win 6.1)
Cannot connect to the internet when Active Sync is connected
as i have pdal imate and i before can connect to internet but now not
any help please
remove device from active sync and go through wizard again - pay particular attention to each screen...
it depent on if your cant connect to the net using the pc or the pda
I connect my pda to pc which enter in my dsl connection and when i enter for
ex. by IE on my pda it write a message at first that can't reach remote server
and when i try again i write error message with multiple number
and thank for everyone replay me but i still have the problem​
2 Questions:
[Question 1] - SOLVED & Thanks to all~
I want to use my Touch Pro to check my hotmail through USB internet connection with my PC. *Not Outlook @ my PPC.
What I've done:
1. I've set up an Hotmail account at my Touch Pro
2. I've tested to check Hotmail using HSDPA/3G/EDGE connection, everything is fine.
3. After plugging with my USB to my PC, I can browse internet through Opera.
Problem:
1. But with the USB connected to my PC, everytime I try to check my Hotmail from my Touch Pro, it starts connecting to internet by itself using HSDPA/3G/EDGE.
2. How to make it to use my USB connection?
[Question 2] (NEW & not solve yet > added & edited @ 17/10/2008)
Another question (but still regarding check email through USB).
My Touch-Pro is sync with my office PC's Outlook with my POP3 email. I'm at home now connected USB to my home PC (with Internet), can I use my mobile to check that outlook email through this USB connection?
Please, please, please help...
littlemao said:
I want to use my Touch Pro to check my hotmail through USB internet connection with my PC. *I don't wanna use Outlook.
What I've done:
1. I've set up an Hotmail account at my Touch Pro
2. I've tested to check Hotmail using HSDPA/3G/EDGE connection, everything is fine.
3. After plugging with my USB to my PC, I can browse internet through Opera.
Problem:
1. But with the USB connected to my PC, everytime I try to check my Hotmail from my Touch Pro, it starts connecting to internet by itself using HSDPA/3G/EDGE.
2. How to make it to use my USB connection?
Please, please, please help...
Click to expand...
Click to collapse
I don 't know how to select your internet connection actually. But you can allways block your HSDPA/3G/EDGE internet connection with NoDATA software (freeware, just two screen taps) enforcing your mobile use USB.
If anyone knows another solution I 'll be happy to hear.
I have an 838pro, but I usually just close any data connections first, then when the box pops up saying its going to connect via 3g, I cancel it and then it defaults to the usb/wifi connection. It seems WML defaults to using your 3g connection every time so unfortunately you have to do this every time.
Cheers
Thanks for the fast reply, will try both and update this thread again.
Btw, any chance we can modify the registry or etc to change the default connection?
Hey, it works! I've install NoData and use it to disable my Touch Pro 3G/GPRS connection, and check my Hotmail, and it works perfectly!
Thanks, freco & wireless
Glad you got it sorted - just a quick thought...
In the Activesync connection settings there is an option File > Connection Settings > "Allow wireless connection on device when connected to desktop" - if you disabled/unchecked this would it not do the same thing?
I think "wireless connection" means WiFi.
If you 're wright when cradled or usb connected you cannot make or recieve calls with these setting, which is not happening.
freco said:
I think "wireless connection" means WiFi.
If you 're wright when cradled or usb connected you cannot make or recieve calls with these setting, which is not happening.
Click to expand...
Click to collapse
I thougt it only applied to data - I've certainly made calls with my device docked. I`ll have a play with my htc later...
Just some update to this thread, I just have my Touch Pro 'hard-reset' due to touch panel was not functioning, and now after total hard-reset ...
I can use the USB connection without having 'NoData' installed...
wondering why...
in activesync connection settings, untick 'Allow wirelss connection on device when connected to desktop'
this should work
For each email account you have to manually choose which type of connection to use.
In email got to:
Menu->Tools->Options, select email, ->Edit account setup->Advanced Server Settings.
Now you can choose if you want the email to use GPRS or Wifi but you have to do this whole thing everytime you change! Not good.
For USB connection I don't know - could you perhaps tell us what it is using?
Thanks.
Another question (but still regarding check email through USB).
My Touch-Pro is sync with my office PC's Outlook with my POP3 email. I'm at home now connected USB to my home PC (with Internet), can I use my mobile to check that outlook email through this USB connection?
littlemao said:
2 Questions:
[Question 1] - SOLVED & Thanks to all~
I want to use my Touch Pro to check my hotmail through USB internet connection with my PC. *Not Outlook @ my PPC.
What I've done:
1. I've set up an Hotmail account at my Touch Pro
2. I've tested to check Hotmail using HSDPA/3G/EDGE connection, everything is fine.
3. After plugging with my USB to my PC, I can browse internet through Opera.
Problem:
1. But with the USB connected to my PC, everytime I try to check my Hotmail from my Touch Pro, it starts connecting to internet by itself using HSDPA/3G/EDGE.
2. How to make it to use my USB connection?
Click to expand...
Click to collapse
Hi have you solved hotmail problem with USB ?
hey i have an HTC touch but for some reason i cant change the password on the wireless network on the connection manager... i have an Alltel phone. but there are settings on it that change the password that i put in it to another one.. do you know how to fix that?
littlemao said:
Hey, it works! I've install NoData and use it to disable my Touch Pro 3G/GPRS connection, and check my Hotmail, and it works perfectly!
Thanks, freco & wireless
Click to expand...
Click to collapse
Huh, I installed it on my Fuze, turned off both data connections shown, launched Opera and it went right online via 3G! I then tried a soft reset and found the same behavior. The program seems to do nothing.
To solve this issue without downloading or using any extra piece of software:
1. Through Settings > All Settings > Connections > Connections
2. select Advanced > Select Networks > then choose My ISP as your internet communication method
3. choose New > enter any name you like then select a modem type "Hayes Compatible on COM1" or any option rather than Cellular GPRS, 3G.
4. the trick, just enter *99***2# in the required phone number as this is a Windows-based code to directly call a device for internet connection where you can replace the number 2 with any other number for multiple sharing internet connection with different devices at the same time.
Now everything will work just fine
Important notes:
-------------------
Make sure that:
1. in the "Network Connections" in Microsoft Windows XP or Vista you have a new icon of "Internet Connection" under Internet Gateway that appeared once you have connected your HTC in ActiveSync or WMDC 6.1 modes.
Hint:
you can use Internet Sharing application installed in HTC in order to create a new ISP connection profile instead of going through Connections option.
Hope this contribution could be usfeul,
Thanks
I am not sure if its the right forum to ask this question, but knowing the smart ppl we have here i hope i am wrong!
I just downloaded Remote RDP Enterprise 3.2 and i am trying to setup so i can connect to my home pc. I am using a router model WGT624 netgear router. I tried the port forwarding (had to setup custom PF, because it wouldnt let me add 3389 as a port on the services which offers through the router) as it was suggested but i think i might be doing something wrong because it just wont connect at all.
my PF on my router looks something like this:
# Service Name Start Port End Port Server IP Address
1 RDP 3389 3389 192.168.X.X
And when i goto whatismyip.com i have a different IP address: 67.234.x.x
on the app on my phone which IP address do i connect through?
Anyone use the same app and has a netgear router and knows how to set it up? or any documentation on how to get this thing working and can share it would be extremely helpful, its for my work!
Thanx so much in advance
Hi iknight8. I don't have that app but I'll try and help.
You need to connect to the external IP address (67.234.x.x) when you are on the internet and the internal IP (192.168.X.X) when you are on your internal network.
A good troubleshooting step would be to try connecting to you PC on the internal address when you are connected to your wifi. This should work with any of the port forwarding you have setup so if it doesn't then then you know it is a proble with the setting on the pc itself. Remote desktop has to be enabled in the computer settings and allowed on any firewalls you are using.
i tried connecting both but i get a Socket is not connected message!
if u can use it and let me know of the setting to make it work would be nice
Thanx again
p.s. wen i am on internal wifi network, same as pc and i put that PF ip addess, i get a mesage "no route to host"...
Do you have allowed RDP connection on PC?
I downloaded the app and the first time I tried it on my wifi I got the same error as you, no route to host. The problem was that I didn't enable remote desktop on my PC. Once I set it to allow connections from computers running any version of remote desktop it worked straight away.
This is what I did.
1. In the app, press the menu button and add.
2. I put in the IP address of my pc and port 3389.
3. On my PC I disabled the windows firewall.
4. Also on my PC (I'm using windows 7), I enabled remote desktop by going to start, right click computer, click properties, click remote settings and check the allow connections from computers running any version of resmote desktop radio button.
5. finally I connected my phone to my wifi and tapped on the connection I created in the app. It gave me my logon screen.
If you can get this working hopefully your port forwarding settings are corect and that will work too. Hope this helps.