Related
the last post tells you the detail
THANX
buzz
Thanks for reply.
Hope for good news
Can't replace wince.nls
I have a Win Mobile Phone Edition 5, very first one in U.S.
I tried to load chinese so that I can read chinese. I copy over font file and am able to see Chinese in Word, providing that I select options.
However I got issues with IE, because I there is no option for me to change the encoding.
I learned that I need to change wince.nls file. And I downloaded your file. Now I got an issue "Access Denied" message when I try to override original wince.nls. Looks like it was in ROM.
Any idea?
Thanks
you should use another file explorer other than the system's one, and then you can overwrite it
the tool is in the attachment(it's in chinese language), it's a green software
The attribute is grayed out.
Thanks for your prompt response and the program.
maybe i did not use it right, some how the menu of the program is mess up. see the attached.
I have Resco Explorer 2005, which also show wince.nls is in rom. Every time I change the other attributes, it changes back when I re-open property page.
While I have a pocket PC 2003 Dell x3. The wince.nls is not rom file.
Can I override rom file?
It is about mid night here in U.S. I will check back first thing in the morning, just in case you do not get response from me right away.
Again, thanks for your help.
on wm2003 it was possible to "override" files in ROM.
Now it is not.
You have to wait until we'll be able to decompress the ROM and inject your wince.nls into ROM.
buzz
ok, i've downloaded your chinese.rar to test-it ...
i've replaced the wince.nls with this procedure
in \windows\ , i've renamed wince.nls to wince5.nls
got an error message "Can't delete wince.nls" , but it's renamed
Copy the new wince.nls to \windows\
Copy fonts to \windows\fonts\
import reg file ... modified
soft-reset
...
Anything appears ...
i'm not able to choose chinese in regional settings
In the registry , after soft-resest , nls automaticly set to "0409"
if i set to 0804 and soft-reset , poof .... 0409
I think there is another problem
OK, I will wait.
One another thing I noticed: through ActiveSync, I can create a folder in windows, (well, as you expect). But I can't copy the wince.nls file to even the newly created folder, not just windows folder. On my PC, the message saying... no space or no permission, etc. I do have like 3-4mb left in main storage and install other program.
Just for your infomation.
it is easily possible to copy wince.nls to your \Windows folder. Just create a cab for it.
But it is not taken into system... That;s the problem here...
Will look at it further...
buzz
I'm success to copy it in my himalaya. I had tried several method, one of them is o.k. but not sure is this one or not.
1) copy the wince.nls to somewhere in your SD Card.
2) Boot your Himalaya into Safe Mode.
3) Then copy the wince.nls to your Himalaya's \windows\
4) Soft Reset.
Do you mean that you can choose the Chinese region now?
Re: The attribute is grayed out.
zoneu said:
Thanks for your prompt response and the program.
maybe i did not use it right, some how the menu of the program is mess up. see the attached.
I have Resco Explorer 2005, which also show wince.nls is in rom. Every time I change the other attributes, it changes back when I re-open property page.
While I have a pocket PC 2003 Dell x3. The wince.nls is not rom file.
Can I override rom file?
It is about mid night here in U.S. I will check back first thing in the morning, just in case you do not get response from me right away.
Again, thanks for your help.
Click to expand...
Click to collapse
see the menu in the attached
buzz_lightyear said:
on wm2003 it was possible to "override" files in ROM.
Now it is not.
You have to wait until we'll be able to decompress the ROM and inject your wince.nls into ROM.
buzz
Click to expand...
Click to collapse
Waiting for your good news ...
only 1.60b could be chineselization
I had tried to replace wince.nls in WM2K5_160C_WWE in various ways mentioned in xda-dev forum. none of them could be finished this job.
so i had to refresh my rom to 1.60b, everything is OK now. I can override the wince.nls, import *.reg, set regional to PRChina and so on.
expecting a perfect WM2K5_160C supproting Simple Chinese.
mazinka said:
I'm success to copy it in my himalaya. I had tried several method, one of them is o.k. but not sure is this one or not.
1) copy the wince.nls to somewhere in your SD Card.
2) Boot your Himalaya into Safe Mode.
3) Then copy the wince.nls to your Himalaya's \windows\
4) Soft Reset.
Click to expand...
Click to collapse
How do u manage to boot ur Himalaya into Safe Mode? Pardon me of becoming a dumbo.
WM5 CHS version SD image
Hi buzz:
I have got a SD image from a Himalaya which rom is CHS version, it's backup from a friend of mine. He got it from the seviece center. but when i use this image to flash my himalya, i replaced the SD head, write it to my SD card and flash...finished, hard reset, and I got an error like this:
"Device authentication failure. Please contact the product manufacture. For reference, please provide your device ID.
xxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxx"
Then I found a way to convert the SD image to a .nbf file for the xda-developers site. converted and flashed using the PC through cable, but the same "Device authentication failure..." error occucred again.
And then, I asked my friend flash the SD image to his device which the image came from. succeeded
!
Any way to make the rom work for my device? help pls...
ljm2020
2005/11/16
Re: WM5 CHS version SD image
ljm2020 said:
Hi buzz:
I have got a SD image from a Himalaya which rom is CHS version, it's backup from a friend of mine. He got it from the seviece center. but when i use this image to flash my himalya, i replaced the SD head, write it to my SD card and flash...finished, hard reset, and I got an error like this:
"Device authentication failure. Please contact the product manufacture. For reference, please provide your device ID.
5083252100381951 38000050bf3f5173"
Then I found a way to convert the SD image to a .nbf file for the xda-developers site. converted and flashed using the PC through cable, but the same "Device authentication failure..." error occucred again.
And then, I asked my friend flash the SD image to his device which the image came from. succeeded
!
Any way to make the rom work for my device? help pls...
ljm2020
2005/11/16
Click to expand...
Click to collapse
hi ljm,
i already answered to you on buzzdev.net )
buzz
Hi,
yesterday my first pocketc phone arrived (BTW it's a german MDA compact); yeah, the first windows mobile of my life!
Thanks to this forum (which i've been lurking for a while) i was able to install the latest Italian Imate Jam ROM (1.12) flawlessly, i was even able to avoid extended_rom's cabs installation (by soft-resetting the device after a hard reset). As soon as i'll buy a new sd card and a card reader, i'll apply the big storage trick too.
Now I have a question: on this thread Sun75's talking about a modded extended rom where most of the CABs included have been modified by changing their default install location (from memory to storage).
Now i wonder: how can i edit my own CAB files to modify their install path or even their content (by, for example, replacing a program with another as Sun75 did)?
What program should i use? How can i 'mod' my own extended rom as Sun75 did???
Thanks u all,
Isidoro
PS: i've searched this forum for a similar post but found nothing; i used Google too; i've also RTFM. I apologize if this question has been answered somewhere but, if so, i wasn't able to find it.
WinCE Cab Manager
Go HERE
If u want to install cabs on SD card,then simply install a registry editor,then navigate to, HKEY_LOCAL_MACHINE/software/Apps/Microsoft Application installer,and change the DWORD Value of "fAskDest",to 1(Dec),then u will be asked each time u install a cab file of the desired destination....
But if u want to edit cab files,search for "WinCeCabManager 1.1"....
My advice will be to copy ur extended rom to the storage card,make a backup copy to ur pc hard disk,then performe the big storage,edit the Dword value mentioned above,then install the desired cabs,on the SD...
Good luck
RAGO :lol:
Hi
I know there are lots of people asking how to save space and mostly they get told to use 'search' and check the stickys.
I'm a keen gadget lover but have no technical background. I have a 64mb Tmobile MDA (with the horrible branding) and the following setup:
R 1.00.10
G 1337.36
D 1.01.00 WWE
I've heard/seen references to big storage etc but I don't really understand it.
Can someone either give me:
- a really simple way to update my rom etc, or
- suggest another way to delete stuff that I won't need (don't want to delete stuff only to find half the programs no longer work)
- explain the easiest way to get rid of all the Tmobile stuff
Many thanks in advance
To prevent the Branding stuff from loadibg you must hard-reset your magician (backup first!!) and after the initialization (calibration etc) you must soft-reset just before the customization starts. You got about 3 to 5 seconds to press the softreset, so when your screen reads 'tap screen to start using ....' you put the stylus in soft-reset hole & then tap the screen. As soon as the default blue WM background appears you press the stylus to soft-reset.
Now you got a plain WM2003 device. & you got the ext-rom visible, not editable, so you can explore it & choose what to install. Network settings for gprs is set by one of the ext-rom cabs.
To gain more storage you can move camera & album from \windows to storage folder. Remember to change shortcuts & registry as well. This saves ariund 1MB. More is possible: I've got < 8MB ram memory allocated to installed stuff with almost all ext-rom cabs installed. Yes I moved a lot.
To gain BIGstorage you can follow instructions below, but first you should get more familiar with the magician I guess. You can save your ext-rom cabs though & update to rom 1.13
url in instructions. To upgrade you just connect the magician to usb & start the downloaded shipped-rom & follow the instructions. Make a backup first & write down your gprs settings, caus you'll have dutch ext-rom cabs after the update. They're in English but contain dutch TMO settings.
Instruction for BS:
- Get nbfdec.exe from the thread 'Upg to 1.13 WWE ROM (with 1.13 Radio) in 10 easy steps!' @ http://forum.xda-developers.com/vie...&start=0&sid=75c5e40168a22052fb7c5554bddd68c2
- get maupgradeut_noid.exe from the ftp
- Download the shipped rom from:
http://www.t-mobile.nl/zakelijk/htdocs/page/service/mda_compact_upgrade.asp
- Download the Hexeditor from:
http://www.hhdsoftware.com/hexeditor.html
1. Unzip NL_11300_131_11200.exe (or any other shipped rom)
2. Put NBFDEC in the same directory as the unzipped shipped rom files
3. Copy the getdevicedata.exe to your Magician and execute to write DeviceData.txt
to \Windows and view with notepad
5. Decode nk.nbf -> nk.nb1:
nbfdec -d nk.nbf nk.nb1
6. Hexedit header to correct ID from DeviceData.txt
(probably only if using a rom from other provider)
7. Replace pattern for bigstorage in hexeditor:
locate the 02 00 00 80 00 20 and change 80 00 to b8 01 in the nk.nb1
(use binary search for this!!)
7. Encode nk.nb1->nk.nbf
nbfdec -e nk.nb1 nk.nbf
8. run maupgradeut_noid.exe to upgrade CE image
Also, this way you will save the contents of increased \Storage folder if previous rom was bigstorage one
Usage sample (must be run from the same folder as nbf files or specify full path):
nbfdec -d nk.nbf nk.nb1
nbfdec -e nk.nb1 nk.nbf
Regards, M
Many thanks OLTP for your reply....perhaps it's me but I still find that quite technical....when I have to rename stuff etc I'm not sure where it is to do it.
The tmobile branding piece is clear and I'll have a stab at that tonight though.
Perhaps I'm just destined to struggle with memory or buy a 128mb device.
Appreciate you taking the time though - anyone else want to have a pop at help a keen but useless gadget lover !
BS is unfortunately quite technical & this is the easiest way.
I suggest to remove the branding, that will save some storage. get more accustomed to your magician by exploring it without changing.
I can write you some steps for moving files to gain more ram.
maybe in the future you can think about BS again.
Cheers, M
pna: oltp's guide is about the best you'll ever get!
Basically, to debrand, do what he says in the first paragraph. This will remove all the additional TMobile gunk being installed. So, you need to hard reset (which will restore your system to "factory condition", and wipe everything), and then soft reset at the right time. Then you have a nice, fresh clean system. You can then read the board to see what files you might have skipped by achieving this, but frankly, you won't have missed much.
You can get your tmobile settings (for gprs etc) from here:
http://www.buymobilephones.net/sp3_setup.ihtml
FYI, before doing anything, get hold of a copy of GSFinder+ or a similar explorer. You will need it do any kind of installing/renaming etc.
Before venturing into the hardrest/soft reset business, consider if you want to do the big storage hack. Again, oltp's guide is perfect, but first the theory: the Extended Rom is like a small disk stuck inside your phone, carrying "backups" of the tmobile configuration stuff. If you do Bigstorage, it'll free that space for your use, giving you an extra 20mb or so to use for free. You can install stuff in there, and use it as a small, but bigger, disk to store stuff on. There's no reason not to do it, other than it's difficulty:
Difficulty? Yes, it takes some time, but instructions are provided, and clarified by oltp, so just follow the instructions carefully and you'll be fine.
It does require some knowledge, or confidence to learn.
So ideally, you want to:
1. Backup any files you want to keep.
2. Do Bigstorage.
3. Skip extended rom rubbish.
However, before you worry about bigstorage or anything technical, I suggest you just do this: clean up your system as it is now, and then just in future remember to install every program you want directly to your SD Card. If you do that, your system will generally have more than enough memory to run well. You can skip all the bigstorage and extended rom business. It's only necessary for those on a particularly tight memory budget. This should be fine for your needs I think.
FYI: to install onto your SD card, always choose NOT to use "main memory" when installing from your PC, or on the PDA, download and use a great program called cabinstl. That will allow you to install to your SD card.
V
oltp said:
Now you got a plain WM2003 device. & you got the ext-rom visible, not editable, so you can explore it & choose what to install. Network settings for gprs is set by one of the ext-rom cabs.
Click to expand...
Click to collapse
oltp, do you mean I cant rename, move, or delete any of the files in extended rom? So its safe even if they show?
Yes,
The magician ext-rom is write-protected. You can't delete the files. Nor format the space. Try it if you like with the delete of the file which mentions the loadvdisk. It's completely harmless, but if you want to be sure copy all cabs first to sd & execute them from there.
Btw the loadvdisk cab, present in a TMO ext-rom, will delete the loadvdisk.lnk from \windows\startup & that's why the ext-rom is hidden.
Cheers, M
oltp said:
Yes,
The magician ext-rom is write-protected. You can't delete the files. Nor format the space. Try it if you like with the delete of the file which mentions the loadvdisk. It's completely harmless, but if you want to be sure copy all cabs first to sd & execute them from there.
Btw the loadvdisk cab, present in a TMO ext-rom, will delete the loadvdisk.lnk from \windows\startup & that's why the ext-rom is hidden.
Cheers, M
Click to expand...
Click to collapse
ok.
the thing is, i want to edit my own extended rom, so next time i do a hard reset, it wont install unnecessary junk like skype and other customisation. i also want to add programs to it so they autoinstall when i do a hard reset.
any advice?
cheers
Sure,
You can use bal666's tool to convert the ext-rom part of a romdump to a diskimage which you can mount under Windows XP, with appropriate software ofcourse.
Then you can do whatever you want with your ext-rom. Requires flashing of your magician & a hard-reset.
For starters I recommend to skip executing of the ext-rom by applying a soft-reset just before the custmization starts after a hard-reset. This way you won't cripple your device.
M
Many thanks OLTP & vjay555,
The branding thing worked a dream and saved me 6mb.
Now want to do big storage. Have got all the downloads ready but just need a bit more help on the 1-8 settings.
I'm really sorry that I need such basic help - haven't really got a clue what I'm doing but prepared to give it a go - please help.
1. No problem with this...even I can do this.
2. Where is this...I assume I move them to the Magician using explore (through activesynch) - am I right...if so, is there an obvious place that the unzipped shipped rom files will be.
3. Can't find a copy of getdevicedata.exe, Where do i find it, and then how do I execute to write DeviceData.txt
5. Afraid I don't know how to do this
6. Happy to give this a go if I get this far
7. How do I do this
8. Happy to give this a go if I get this far
Also, a little confused in the section after no 8 - what do I do here?
Hope you haven't lost patience with me. Hope to hear back soon.
Cheers
Paul,
I recently updated the wiki (top right link on each forum page & go to the howto part of the magician section) with the BIG Storage from shipped-rom method. This contains some more info than this thread. Pls read it & mail me the remaining questions, you've got my email-address. I'll add some extra help then.
Cheers, M
Trying to download latest UK rom on WIKI site but the link to this ROM is not working: OS 1.12.00 / ExtROM 1.12.131 / Radio 1.12
Any ideas?
Ta
Yep a broken link, pls use this to go to the shipped rom section from the ftp: ftp://xda:[email protected]/Magician/Shipped_ROMS/
Maybe I take the time tomorrow to check some of the links
btw latest uk-rom should be 1.13WWE from TMO.
nm8 said:
oltp said:
Yes,
The magician ext-rom is write-protected. You can't delete the files. Nor format the space. Try it if you like with the delete of the file which mentions the loadvdisk. It's completely harmless, but if you want to be sure copy all cabs first to sd & execute them from there.
Btw the loadvdisk cab, present in a TMO ext-rom, will delete the loadvdisk.lnk from \windows\startup & that's why the ext-rom is hidden.
Cheers, M
Click to expand...
Click to collapse
ok.
the thing is, i want to edit my own extended rom, so next time i do a hard reset, it wont install unnecessary junk like skype and other customisation. i also want to add programs to it so they autoinstall when i do a hard reset.
any advice?
cheers
Click to expand...
Click to collapse
you may want to check this out at htt*://en.pdamobiz.com/en/forum/forum_posts.asp?TID=395&PN=1. it is based on bal666 info. go check it out.
That's about romcooking and can be found herevas well. It's no BS hack.
Yes, it's no BS. But just a little info for nm8 to do ext rom customizations from his last reply.
hey Does any one have any tools to unlock the Extended Rom for my Magician (O2 xda2 mini), i wanna install some cabs in there pls do help.
1.Download Resco Explorer or Total Commander (cos you will need either these 2 program to enable "Reveal all files"
2. To unhide the Extended ROM, after you reveal all files, go to your File Explorer (Start, Programs, File Explorer)
3. Using the File Explorer, go to Windows folder and find this file called LoadVDisk.exe and then just run the file
4. Next, using File Explorer again, and go to \My Device and you should see the Extended ROM folder
5. Click on the Extended ROM folder and find the necessary cab file and click on it..
6. soft reset
also the search function is also quite useful. try it once in a while...
hey thanks for the advice will check on it, thank you.
hey man it works so how do i place another program in ext rom and will it be installed everytime i hard reset, and yeah since its unlocked how do i lock it again. than for the help hoping for a reply soon.
u cant place any new programs in the ext ROM. that ROM is supposed to be inaccessible to u. ur ext ROM should be hidden after the soft reset. check it!
You may not be able to place anything in the ExtROM till you unlock it. You have only "unhide" the ROM by running that utility. Till you unlock it you can only read the contents not write into it....
so tell me how do i unlock the ext-Rom of a magician, has anyone got any idea, pls let me know if there are any possibilities, i want to unlock the ext. rom of my O2 xda2 mini, pls help.
There are more possibilities read its content, (unhiding it). One possibility to hard reset it (pressing the Power button while pushing RESET). This will erase every data+programs from the device.
When the 1st boot finishes the ExtROM cabs are beginning to install. You have to Soft Reset the device (pushing RESET) to interrupt it. No cabs will be installed and ExtROM will be readable.
asinan said:
so tell me how do i unlock the ext-Rom of a magician, has anyone got any idea, pls let me know if there are any possibilities, i want to unlock the ext. rom of my O2 xda2 mini, pls help.
Click to expand...
Click to collapse
There are no unlockers for Magician AFAIK. But now most of the people go for big storage hack with which you get 27MB of extra space for storage. Put ExtROM on the SD card. Lots of material avilable on this forum for doing so..
what is the advantage of having a big storage other than ext.Rom, if i need to can i reverse the process back to normal.
The term “Big Storage” in a nut shell is the process of modifying the built in ROM file of the Magician and deleting its “Extended ROM” contents which frees up approx 20Mb of space. This new space or “Storage” can be used to install 3rd party apps etc and won’t be deleted after a hard reset. The only way to restore the contents is by “Flashing” the ROM again with a new complete ROM File. - excerpt from ampda guide
so what is the latest rom with the big storage for a magician. i surely would love to make a switch over. thank you.
The latest and last ROM for the Magician is 1.13 with Radio 1.12. Actually you can convert any ROM to BS.
Hi,
I have been on this site for about a week now. I was drawn here by the desire to take my Imate JamIn up to WM6.
So I pulled from the web the file:
RUU_Prophet_220734_2207114_024721_NVID_QTEK and hurled it onto my PDA
It went from Imate to QTEK but still worked pretty well. So I then went and loaded Upgrade Happy from a site in Roumania.
This loaded but was distinctly unimpressive and unstable so I managed to downgrade to the WM5 file above again.
Then I tried Smart1's v2 WM6 file and this went on OK. However, I have experienced a few issues with the battery and other things like Timewizard, etc.
So I have gone back to the NVID_QTEK WM5 file again.
BUT I would really like to put back on my Imate ROM which I have stored away. Sadly, whenever I try and load the ROM it states that the version is lower and I can only do an UPGRADE ( I get a 286 error).
I have searched here and Google and think that I can Un CID my phone (not actually sure what this does mind). I have read posts suggesting that once done I can load any version of any Prophet ROM on my PDA.
I went off and ended up on PDAMobiz and pulled down a file called:
PDAMobiz.com_ProphetAKU2_unlockCID.rar
But this site is incredibly slow and the file is corrupt when I finally get it down.
Can anyone explain to me whether it is possible to get to reload my earlier ROM version Imate ROM? If it is can anyone explain what I need to do and perhaps put up a link to an area where I can pull the tools down.
This website has a great reputation for helping each other out and I am sure that my ignorance will be forgiven,
Kind Regards,
Sam.
Hi
This is because you have upgraded your ipl/spl and these can't be downloaded.
But don't worry it's not a problem
if you have the original rom you should have a .nbf file?
You can use typho5.exe -x xxx.nbf (whatever it is called) this will extract the individual elements (ipl/spl/os/extrom/radio/splash screens) as .nb files.
Then use nb2nbf to build a new nbf file without spl/ipl parts. copy this file back to your backup folder (rename the original one first) and install again
Good Luck
Thanks - I have just a couple more dumb questions...
FlykThewiz,
Many thanks for your help.
I have the file:JAMin_WWE_213923_2139123_022021_shi.exe
Do you know how I get the .NBF out of it?
Also,
You couldn't point me to the tools you mention could you?
If I do what you said then do I get back my own Imate Splash screen too?
Do you know if I will suffer any problems with things being different versions?
Once again many thanks I will let you know how I get on.
Kind Regards,
Sam.
You can use winrar (free download - search google if you don't have it) to extract the files in your exe.
One of the file will be the nbf.
I will sort out the instructions for you but I have to go out for a couple of hours at the moment.
T H A N K Y O U
flykthewiz,
You are simply The MAN
Many, Many thanks,
Sam.
I don't know about being the man - i had the same problem myself.
Attached is a zip file with the two tools you need.
I suggest you create a folder called c:\rom and copy the contents of your exe file and these to programs into it.
goto a dos cmd window and cd \rom
type "typho5 -x nk.nbf" (no quotes)
you will then have a number of *.nb files in c:\rom
rename nk.nbf to nk.org
send me the list of nb files you have.
ZIPPED with winzip 12
Hi flykthewiz
is 92000000-Splash.nb is the imate pic when softreset
cause am using AKU3.3.13.ASERG after I unlocked my Jamin with RUU_Prophet_220734_2207114_024721_NVID .... and want to go back only for the Imate screen instead of QTEK, and can I flash with it only
thanks
Splash Screens
There are two splash screens - the one you mention is the first (often blank)
The second is 9d000000-xxx.nb this is the one that is displayed most of the time when the phone is booting. To enter this in nb2nbf you need to manually enter "HTC Logo" as the image name.
secoseco said:
Hi flykthewiz
is 92000000-Splash.nb is the imate pic when softreset
cause am using AKU3.3.13.ASERG after I unlocked my Jamin with RUU_Prophet_220734_2207114_024721_NVID .... and want to go back only for the Imate screen instead of QTEK, and can I flash with it only
thanks
Click to expand...
Click to collapse
FlykTheWiz,
Thanks for the tools.
The files I have are as follows:
30/03/2007 13:50 59,768,832 80040000-OS_0.nb
30/03/2007 13:50 786,432 91000000-SPL_1.nb
30/03/2007 13:50 786,432 91000000-SPL_2.nb
30/03/2007 13:50 196,608 92000000-Splash.nb
30/03/2007 13:50 2,621,440 96000000-GSM_0.nb
30/03/2007 13:50 10,485,760 9b000000-Extension.nb
30/03/2007 13:50 65,536 9d000000-HTC.nb
28/03/2006 15:51 74,713,088 nk.nbf
16/09/2005 12:20 53,248 nb2nbf.exe
13/03/2006 19:09 784,972 typho5.exe
I have loaded up the nb2nbf file but have no idea what to do with it - The only option appears to be for a Tornado...
Thanks,
Sam.
Ok
fill in nb2nbf like the image in the attached zip file.
Important notes:
1. use the ... browse buttons to select your files and the length field will be filled in for you (the image shows mostly zeros)
2. the image name for the extended rom is Extension Rom (not Extended) and you have to type it manually - its not in the drop dow list.
3. the start address for OS.nb is 80040000 (not 82040000 which the program defaults to)
4. you need to manually type HTC Logo in image type - its not in the list.
Do not add the ipl and spl files! (these are the ones that are causing your problems)
When its all filled in click on Translate and when that is finished exit the program.
If you have copied all of the contents of your extracted exe to c:\ROM you should have a program called ROMUpdateUtility.
Connect your pda to usb and run this program and follow the instructions (you've done this before )
After its finished your phone will hard reset and you should have your original ROM.
It doesnt matter that ipl and spl are different versions
Good Luck
flykthewiz said:
There are two splash screens - the one you mention is the first (often blank)
The second is 9d000000-xxx.nb this is the one that is displayed most of the time when the phone is booting. To enter this in nb2nbf you need to manually enter "HTC Logo" as the image name.
Click to expand...
Click to collapse
thanks for replay
in Imate rom, splash screens and HTC Logo are differ from NVID QTEK rom
Can I flash only those 2 files to get back the Imate screen
thanks
Yes you can
secoseco said:
thanks for replay
in Imate rom, splash screens and HTC Logo are differ from NVID QTEK rom
Can I flash only those 2 files to get back the Imate screen
thanks
Click to expand...
Click to collapse
Nearly there
FlykTheWiz,
Many thanks for the instructions. I have done what you suggested with NB2NKF
However, When I try to run my RUU utility I get error code 238 Cannot Read the file.
I extracted all files into a single directory and replaced the default .NBF with my new one. Then ran the RUU tool.
Am I being a numpty?
Many thanks,
Sam.
hmmm
Try the appropriate RUU from the attached
If your ipl ends in .000 use G3 version
if ends in .0001 use G4 version
T H A N K Y O U
I would just like to thank you for your kindness and patience. I have now got the HTC device reblown to the original condition that I started from (with the exception of the IPL/SPL).
Using the G4 utility worked for me.
On the way I have learned a great deal and appreciate your assistance.
Thank you very much,
Sam.
No problem at all
flyk (definitely) thewiz !!!
Flykthewiz... Many thanks for your input to this thread... your tutorial has helped me (and many of us) more than almost ANY other on this site!!! You are obviously very knowledgeable in this "art"!!!!
Since we have not seen much input from Jesterz or Smart1 lately (I can understand that it is time-consuming...!) , can I suggest that maybe you could take up the reigns and offer to this community your first Prophet ROM build??? (Any +AKU base will be a help??)
Please do consider doing this - I *know* you can do this and although I appreciate it can take a lot of your personal time and effort to achieve.. I am sure that your contribution will be appreciated and valued by us all, if u were to attempt such a project!!?
If not, we do understand... but please stay around here and continue to help us all with your flykth-wiz-dom!!!
Moz.
Thanks for your vote of confidence, but I have to say - you must be joking
I only started looking at modifying ROM's 2 days ago and it is a minefield. I have absolutely every respect for Jesterz, Smart1, Nghianha, and all of the guys over at PDAMobiz. I think it will be a long while before I am anything like of their calibre!
Mozzerr said:
Flykthewiz... Many thanks for your input to this thread... your tutorial has helped me (and many of us) more than almost ANY other on this site!!! You are obviously very knowledgeable in this "art"!!!!
Since we have not seen much input from Jesterz or Smart1 lately (I can understand that it is time-consuming...!) , can I suggest that maybe you could take up the reigns and offer to this community your first Prophet ROM build??? (Any +AKU base will be a help??)
Please do consider doing this - I *know* you can do this and although I appreciate it can take a lot of your personal time and effort to achieve.. I am sure that your contribution will be appreciated and valued by us all, if u were to attempt such a project!!?
If not, we do understand... but please stay around here and continue to help us all with your flykth-wiz-dom!!!
Moz.
Click to expand...
Click to collapse
help for step by step help for change boot logo imate jamin
Hi all:
1. how to extract tools.zip on pc
2. my pda (i-mate jamin) and update smart1-new v2 . don't like change i-mate boot logo to Qtek how to change boot logo to original i-mate jamin?
thanks for step by step help.
"...a long while..."??? I don't think so!!! Still, your openess and willingness to share what you have learned in such a short while is refreshing to see on this forum!! I still say T H A N K Y O U ! !
flykthewiz said:
Thanks for your vote of confidence, but I have to say - you must be joking
I only started looking at modifying ROM's 2 days ago and it is a minefield. I have absolutely every respect for Jesterz, Smart1, Nghianha, and all of the guys over at PDAMobiz. I think it will be a long while before I am anything like of their calibre!
Click to expand...
Click to collapse