Database Info

OEMAGW.dll

OEMAGW.dll appears to be missing from my windows mobile 6 universal, i think its needed for voice speed dial to work over bluetooth... Im trying to switch back to voice speed dial as voice command doesnt seem to do anything (im guessing it needs training, but i cant see how to train it). Can anyone make this file available for me as I really need speed dial for my car's hands free headunit. Thanks in advance.

hotrodder said:
OEMAGW.dll appears to be missing from my windows mobile 6 universal, i think its needed for voice speed dial to work over bluetooth... Im trying to switch back to voice speed dial as voice command doesnt seem to do anything (im guessing it needs training, but i cant see how to train it). Can anyone make this file available for me as I really need speed dial for my car's hands free headunit. Thanks in advance.
Click to expand...
Click to collapse
Hi there,
I have uploaded the voice dial on the following thread:
http://forum.xda-developers.com/showthread.php?t=345256&page=7
I am not sure if this is what you are looking for!
KOR!

OK, thanks , im gonna give it a go, re-installing using that cab, and using the REG file... I was just after the dll for the OEM bluetooth audio gateway.
If i explain the problem i have maybe someone will have experienced it before. I recently flashed with JWRIGHT's rom (FANTASTIC BTW ) but it comes with voice command not just voice speed dial... which i cant get to work (pretty sure its me doing something wrong), anyway im quite happy with voice speed dial, so i want to just use that instead... I install it, apply a couple of REG fixes (just pointing to SDDIALER i think) and set it up on the button. When i press the button it works fine, but when i use bluetooth it appears to activate both voice speed dial and voice command at the same time. I get two seperate bleeps, one from speed dial and a different one from voice command, then if i dont say what its expecting it asks me to please repeat... they seem to conflict and as such it doesnt work. I think that its is something to do with the bluetooth gateway, so i just want to point the registry to the standard one... but i cant find it in the windows folder... The DLL is OEMAGW.dll .
Im hoping if i can get that and update the registry it will work... i could be wrong as im still new to playing with new roms and stuff.
Off topic a little, Im interested in trying to cook my own roms, but i dont know where to begin... im a programmer by trade but i dont really have any experience in this sort of thing. Any help or advice would be appreciated.

Microsoft Voice Command

Anyone have any luck getting MC VC 1.6 to work on the Touch Cruise via bluetooth? I can get it to work via the buttons on the TC itself, but not via any of the bluetooth headsets I have. I also have an AT&T Tilt and 8125, and I don't have any issues using MC VC 1.6 and bluetooth headsets with either of those phone.
I've tried all the fixes I've found so far, but none of them have worked so far. If anyone's got any ideas how to get this working, I could use some help.
Stumped,
Dave

Hi Dave. I have MS VC 1.6 up and running on my TC via bluetooth on my Jawbone no problem. Know it doesn't help to answer you questions, but it does work.
Dan

Dan, thanks for the reply. I got it working, but had to jump through some hoops to get it working, and I'm not sure which step was the one that finally got it working. Seems to be working OK, but I no longer have a flashing blue LED light on the TC to show that Bluetooth is turned on.
Did you have to do anything special to get it working? Can you tell me what build of MSVC you're using?
Thanks,
Dave

MS VoiceCommand v1.60.4622.0
Hi and sorry for my pour english,
I installed MS VoiceCommand 1.6 Fr on my HTC Cruise.
Everything works fine except that the blue LED does not flash when I turn "On" the BT.
If I remove MS VC with the BT "On", the blue LED restart to flash. And if I reinstall MSVC, it stops blinking.
I still have a look at this forum and the other ones, but I didn't found the solution.
Maybe someone can help me ?
Bemi

How could i get this to work on the S9's on the Tilt and 8525 instead of the voice recognition app?

MSVC Broke my BT,could not connect to my Moto S9 with it installed. Had to uninstall VC to get BT back. Anyone else have this prblem?

bemi said:
Hi and sorry for my pour english,
I installed MS VoiceCommand 1.6 Fr on my HTC Cruise.
Everything works fine except that the blue LED does not flash when I turn "On" the BT.
If I remove MS VC with the BT "On", the blue LED restart to flash. And if I reinstall MSVC, it stops blinking.
I still have a look at this forum and the other ones, but I didn't found the solution.
Maybe someone can help me ?
Bemi
Click to expand...
Click to collapse
Bemi, exactly the same thing for me, with MVC 1.6 fr on my TC french SFR opérator
waiting for some trick to fix that blue led

I have the same problem with the blue light (it is really a very strange bug...)
An other question, with BT on: I try to use the vocal command with the head set and the phone on stand by nothing happens if I turn it on the phone (but the phone is still locked) nothing happens. I have to unlock the TC to be able to use the MSVC with a bluetooth headset.
is it normal???
Hope my question is clear...
Thank for any help/info

dfields said:
Dan, thanks for the reply. I got it working, but had to jump through some hoops to get it working, and I'm not sure which step was the one that finally got it working. Seems to be working OK, but I no longer have a flashing blue LED light on the TC to show that Bluetooth is turned on.
Did you have to do anything special to get it working? Can you tell me what build of MSVC you're using?
Thanks,
Dave
Click to expand...
Click to collapse
@dfields,
Could you please explain what you did to get VC to work? does your BT work after instaling VC? Not just the flashing LED but are you able to connect to a BT headset?

XDA Orbit 2 and Voice Command does not announce incomeing calls
Hi,
my device: XDA orbit 2 = Touch Cruise = Polaris
OS: WM6 GER
VC 1.6 GER
I know that there are problems, but i also do know, that it can be solved. there are some files to be replaced on the phone. i tried the ones that are offered in another thread for another wm6 phone, but the dont work. i guess, because they are for the english version of VC 1.6, but i have the german version.
does anybody know, wher i can get these files? or how can i make VC 1.6 to announce incomming calls on my xda orbit 2?
Thanks

Dutty Official 6.1 & Bluetooth? Is it working

sorry if this has been covered, but ever since i swithed to the 6.1 roms
i can not seem to get my bluetooth headset working. I can pair the device
but when i press the button on my headset nothing happens. If i hold the button in it dials the last number.
Anyone else experiencing this? Was working fine prior to 6.1 for me and
have done the process 100 times so i know i doing everything right.
6.1 does not prompt me for the device password "0000" ...

lancevs said:
sorry if this has been covered, but ever since i swithed to the 6.1 roms
i can not seem to get my bluetooth headset working. I can pair the device
but when i press the button on my headset nothing happens. If i hold the button in it dials the last number.
Anyone else experiencing this? Was working fine prior to 6.1 for me and
have done the process 100 times so i know i doing everything right.
6.1 does not prompt me for the device password "0000" ...
Click to expand...
Click to collapse
Funny you should say that. I have been trying DCS1.3 and the bluetooth works fine (both headset and a2dp profiles) and in Dutty's 6.1 rom (WHICH IS SUPERB I MUST SAY !!!) the headset profile works fine but the a2dp stereo occasionally cuts out. Done it a few times and it wasn't a range issue or anything. Anyone else had this !!
It's a shame because dutty's 6.1 rom is amazing. Love the speed of the cube and the beautiful icons !
Is it just me or has anyone else experienced this ?

maybe its just me!
am i the only one with this issue?

bluetooth
Mine works fine- I have three headsets and a Bluetooth GPS synced up.

pairing is no issue for me. I cant get the BT working with Voice Dialer.
Few ppl including myself have ask for solution in Dutty's thread, but no luck. I am currently using 3.03 leak version and it works great.

Did you HARD RESET after flashing the 6.1 rom at the "tap here" screen?

Yes.
Hard reset anf reflash few times... no go...
P1Tater said:
Did you HARD RESET after flashing the 6.1 rom at the "tap here" screen?
Click to expand...
Click to collapse

Penske MB said:
Yes.
Hard reset anf reflash few times... no go...
Click to expand...
Click to collapse
I remember there being a bluetooth fix with something.
Do any of these work?

tried both..... still no go
when BT botton was press, it went to dial pad instead voice dialer..
alltheway said:
I remember there being a bluetooth fix with something.
Do any of these work?
Click to expand...
Click to collapse

Penske MB said:
tried both..... still no go
when BT botton was press, it went to dial pad instead voice dialer..
Click to expand...
Click to collapse
do you map the keys correctly?

There is no setting to map the BT earpiece's botton.....
If any, plz let me know.
alltheway said:
do you map the keys correctly?
Click to expand...
Click to collapse

I have only just installed the new ROM and ran a few quick tests with the parrot minikit. It paired okay but then I had a few intermittent problems. Sometimes dialling from the phone would not automatically transfer to the minikit and sometimes I could not transfer a conversation from the phone to the minikit. Other times these worked okay. I did not try answering from the minikit as no-one called me while I was testing.
Only tried this once so will try again tonight and then try the bluetooth fixes and report back.
Using Radio 1.64.08.21 on Orange TyTN II and did the hard reset after installation.

Penske MB said:
There is no setting to map the BT earpiece's botton.....
If any, plz let me know.
Click to expand...
Click to collapse
Start > Setting > Buttons.

Again...tried... map the botton..... i have try everything I can think of, but... no solution....
BTW, the botton 6 "PTT" map will start the voice dialer. BUT... what I need is press the botton on BT device to start voice dialer and I will heard a "beep" to start voice dialer while I am driving or doing oter thing without touch my phone. When I press the botton on BT device, it goes to dial pad or I can't heard the "beep" again, and it start the voice dial in "mute" mode... I have never experience in any other ROM I tried before. So far I have not yet found any solution. I need the BT device, because I am always on phone while doing other things.
alltheway said:
Start > Setting > Buttons.
Click to expand...
Click to collapse

Penske MB said:
Again...tried... map the botton..... i have try everything I can think of, but... no solution....
BTW, the botton 6 "PTT" map will start the voice dialer. BUT... what I need is press the botton on BT device to start voice dialer and I will heard a "beep" to start voice dialer while I am driving or doing oter thing without touch my phone. When I press the botton on BT device, it goes to dial pad or I can't heard the "beep" again, and it start the voice dial in "mute" mode... I have never experience in any other ROM I tried before. So far I have not yet found any solution. I need the BT device, because I am always on phone while doing other things.
Click to expand...
Click to collapse
same problem here, was working great on all the 6.0 roms but since 6.1 not working for me.. i hear no sound in the headset. i do see the headset icon on the dialer screen, but the button on the headset does nothing for me.. I am using the motorola h700 i believe.

UK TYTN II with Dutty's 6.1 rom works fine for me. Holding the BT button on headset launches voice dialler ( Schaps cyberon version) Double pressing the BT headset button dials last number. Single press on BT headest answers call when the phone rings.

Can you attack the CAb you use? I might have the older version of Cyberon.
Thanks
c.b said:
UK TYTN II with Dutty's 6.1 rom works fine for me. Holding the BT button on headset launches voice dialler ( Schaps cyberon version) Double pressing the BT headset button dials last number. Single press on BT headest answers call when the phone rings.
Click to expand...
Click to collapse

Penske MB said:
Can you attack the CAb you use? I might have the older version of Cyberon.
Thanks
Click to expand...
Click to collapse
do u mean this one.

The one I am using from Schaps can be found here http://forum.xda-developers.com/attachment.php?attachmentid=63977

Thanks guys,
Those are the 2 files I found last night, but did not have the chance to try them yet.
Cyberon voice command is almost 2MB and compare with Cyberon Voice Dialer 617k. What are the difference between these two??

HD2 automatically make calls when use the earphone

Hello, I am not sure I should ask this question here, but please help.I buy a HD2 in singapore, I check the s/n and P/n to prove it is offical. But now I got a problem is the phone will call the last number of the call history out automatically when I use the earphone to listen Mp3 with Manila Mp3 Player. This happen when the screen is locked and turned off, and only when I use the earphone. I am using the offical rom with radio 1.66 which I download from www.HTC.com. It also happens to my frends who also use HD2. Is there any why to fix it? Thanks a lot.

dsdsdsf said:
Hello, I am not sure I should ask this question here, but please help.I buy a HD2 in singapore, I check the s/n and P/n to prove it is offical. But now I got a problem is the phone will call the last number of the call history out automatically when I use the earphone to listen Mp3 with Manila Mp3 Player. This happen when the screen is locked and turned off, and only when I use the earphone. I am using the offical rom with radio 1.66 which I download from www.HTC.com. It also happens to my frends who also use HD2. Is there any why to fix it? Thanks a lot.
Click to expand...
Click to collapse
It is because the headphone jack is making like the headset 'call' button.
Search is your friend:
http://forum.xda-developers.com/showthread.php?t=637502&highlight=headset+number

cozzykim said:
It is because the headphone jack is making like the headset 'call' button.
Search is your friend:
http://forum.xda-developers.com/showthread.php?t=637502&highlight=headset+number
Click to expand...
Click to collapse
Thanks a lot

Although the thread is quite old (according to last post date) but I had the same issue on my hd2 i.e. dialing the last number automatically when listening to song with original stock earphone. After some time I came to know that if there is any last number dialed on your phone then quick double pressing the middle button on earphone (just like double clicking on you desktop or laptop) will cause the hd2 to dial last number in your phone call history. You can check it out.
I am going to copy and paste the same comments on another thread where simillar issue is mentioned.

Microsoft Voice Command making my phone unusable

This has been an ongoing problem with my last two phones. First was an HTC Touch Pro, now an HTC Touch Pro2. It doesn't matter if I am on a stock or custom ROM or whatever.
I noticed that when I called people, especially when the headphone jack was plugged in (using the auxiliary port in my car speakers) that people would be unable to hear me for a good 5 to 30 seconds. I could hear them but they couldn't hear me. Eventually they'd be able to hear me.
I kept killing processes one by one until I narrowed it down. It was Microsoft Voice Command! I was really surprised because I use the program only for announcing who is calling me (very nice feature so I don't have to run to the phone if it's someone I don't care about). I don't use it for dialing or anything of the like.
I have Googled for hours and a few people have the same problem but the only fix appears to be "don't use Voice Command" which sucks. I guess what I'm asking is if either a) there's a way to fix MSVC so this doesn't happen or b) there's a program that announces who is calling you that I can use instead of MSVC.
MSVC was annoying anyway because when you click "mute ring" when someone is calling you it still repeats the name! Pretty stupid. So I guess I'd just like some sort of replacement program for announcing incoming calls. Any suggestions would be greatly appreciated.

Have you tried fixing this issue using this?
http://forum.xda-developers.com/showthread.php?t=586901

Pumpiron579 said:
Have you tried fixing this issue using this?
http://forum.xda-developers.com/showthread.php?t=586901
Click to expand...
Click to collapse
Thanks but that program did little more than allow me to change the volumes and speeds.

I have the same issue with my Blackstone. When I check the running process I find that Voice Command takes almost 100 pct and James everything else.
I also Need it to announce who is calling.

Yeah I'm essentially giving up on MSVC ever working correctly, so if anyone know of a program that just announces who is calling, that would work just great.

daddylonglegs said:
Thanks but that program did little more than allow me to change the volumes and speeds.
Click to expand...
Click to collapse
LOL,Yea, it does a lot but I would ask your question about your headjacks in that forum. I am sure you would get an answer.

um, what versions are you guys using?
tried using an up to date one?
Microsoft_Voice_Command_v1.6.23562.cab
(for 6.5.x)
Microsoft_Voice_Command.v1.6.21881.cab
(for 6.5)

pyrorob said:
um, what versions are you guys using?
tried using an up to date one?
Microsoft_Voice_Command_v1.6.23562.cab
(for 6.5.x)
Microsoft_Voice_Command.v1.6.21881.cab
(for 6.5)
Click to expand...
Click to collapse
I am on 6.5 and your CAB is actually older than what I have cooked into the ROM... :\

MVC1.6 - no please! i am looking for a Voice activated app...
What good is that MVC1.6 if you have to Press a button and then say command? its called crap. Such a Program is already inbuilt in my WM6.
I am looking for a Voice program that keeps running in the background and its always in the listening mode and I can simply "SAY" these commands "as well".
1) WakeUp - wakes up my PPC
2) Sleep - PPC goes to Sleep mode (PPC is On though)
3) Programmed to wake me up at a particular time (by a beautiful Virtual Girl)
4) and Features of MVC1.6
is there anything like that for PPC WM6 ? CE5.2 version?
regards
fifthelement