Related
Hello I have big problem with my SDIO Wi-fi card!
I bought Safecom card SDIO for Wlan and I have installed WM 5 1.60b 96 on my Qtek 2020 and card just does not work! The blue signal light just does not blink - as it should! So I baddly needed Wi-fi and I downgraded to WM 2003SE - where the card worked - perfectly. I could pull it out and plug it in with no errors, but here when I instaled drivers it said it were not ment for this tipe of OS - like almost all programs! I turned to manufacturer and they told me it was only for WM 2003 - not even 2003SE!?!
I saw similar post for the problem and it said that they use WM 5 1.6a - but with that version I had alredy have had quite a bit probems with phone operation - it didn't work. Help me please - I just cannot downgreade to WM 2003SE any more - I can't stand OS with non persistent memory, excell with no graphs, poorer graphics, no power point... any more!
PLEASE HELP ME! ANYONE!
I got the safe Safecomm SDIO Wireless B card as you and I am using a XDA2
I have just upgraded from WM2003SE to WM5 with 96MB RAM.... and I have been experiencing the same problem. But I fixed it by downloading and installing the following 2 items:
-Safecom_11b_drivers.rar
-Widcomm fix after install for 1.50
They can be found on:
http://buzzdev.net/component/option,com_remository/Itemid,100/func,select/id,15/
Best Regards,
Sam
The Ambicom WM2005 beta drivers work with the Safecom SDIO wifi card, as they're the same piece of kit.
I'm using it with WM2005 2.01.32WWE from tofclock. Only trouble I have at the moment is that you need to soft-reset the device with the card inserted to start the blue light and activate the card each time you want to use it.....
I haven't yet found a way of making the card work upon insertion without resetting the device.
Have you tried to install the wifi fix?
It is Patch #7 on this page:
http://wiki.xda-developers.com/index.php?pagename=BA_WM5_Patches_ChangeLog
Sandisk Wifi Connection Problem
I got the same problem on my SanDisk WiFi card after upgrading to WM2005 it never work.Can anyone help me to solve this problem?Tried to download those drivers but it never work.
hmm, that's interesting, i am not sure... because mine is a safecom sdio wifi card, and it works fine w/ the drivers
SanDisk Hifi SD Card is down!
jon-jon said:
I got the same problem on my SanDisk WiFi card after upgrading to WM2005 it never work.Can anyone help me to solve this problem?Tried to download those drivers but it never work.
Click to expand...
Click to collapse
Hello
This happened to me too.
First on 2003SE it worked very well, then after install wm5 1.60 stoped working.
I performed a downgrade to 2003se again and not worked as well, another downgrade to wm2003 1.72 official O2 rom and the same never worked anymore.
Does someone know if it is possible that some how wm5 1.60 cause an error inside the card and she died for all rom's?
Re: SanDisk Hifi SD Card is down!
rodinhas said:
jon-jon said:
I got the same problem on my SanDisk WiFi card after upgrading to WM2005 it never work.Can anyone help me to solve this problem?Tried to download those drivers but it never work.
Click to expand...
Click to collapse
Hello
This happened to me too.
First on 2003SE it worked very well, then after install wm5 1.60 stoped working.
I performed a downgrade to 2003se again and not worked as well, another downgrade to wm2003 1.72 official O2 rom and the same never worked anymore.
Does someone know if it is possible that some how wm5 1.60 cause an error inside the card and she died for all rom's?
Click to expand...
Click to collapse
Now I have WM5 2.01a64 and instaled 1.18 driver from the file: Safecom_11b_drivers.rar downloaded from buzzdev.net, the card waked up and then started to blink, the PDA detected the card and enabled the hifi option in the wireless manager, but the card did not found any network. Even after manually inputed the SSID.
I really think the card is damaged.
I have a SANDISK SD wifi card which i just can't get to work on my himalaya with wm5. Does anyone know if there is a solution yet?
San disk WIFI SD card doesn't have driver for WM5. I have look for in the website company, it doesn't support for WM5 driver. If somebody can solve driver issue for WM5, I think this problem will be solved immidiately
dear SammiBoi, could you update the links really need driver for safecom sdw11b Wi-Fi Card.
Best Regards
Gans15 said:
dear SammiBoi, could you update the links really need driver for safecom sdw11b Wi-Fi Card.
Best Regards
Click to expand...
Click to collapse
i don't think your going to get a reply, being that he hasn't been on since 15th march 2010.
google it
Gans15 said:
dear SammiBoi, could you update the links really need driver for safecom sdw11b Wi-Fi Card.
Best Regards
Click to expand...
Click to collapse
Maybe it is a clone of the JustMobile SDIO WLAN Card as mentioned here:http://forum.xda-developers.com/showpost.php?p=2134382&postcount=30
Or try from the previous post in that thread:http://www.ambicom.com.tw/support/WL54C-SD.html
Or try the workaround described here:http://www.gpspassion.com/forumsen/topic.asp?TOPIC_ID=132572
Thank you for your help, but does not work. If message Unrecognized Card
when i had one it would never hold a connection
hi links not working
muckelmaus said:
Maybe it is a clone of the JustMobile SDIO WLAN Card as mentioned here:http://forum.xda-developers.com/showpost.php?p=2134382&postcount=30
Or try from the previous post in that thread:http://www.ambicom.com.tw/support/WL54C-SD.html
Or try the workaround described here:http://www.gpspassion.com/forumsen/topic.asp?TOPIC_ID=132572
Click to expand...
Click to collapse
hi muckelmaus
ive tried those links you posted and they seem to be down,
please advise and many thanks for all your help.
rgds basic
basicbri said:
hi muckelmaus
ive tried those links you posted and they seem to be down,
please advise and many thanks for all your help.
rgds basic
Click to expand...
Click to collapse
Did you try the .cab file?
muckelmaus said:
Did you try the .cab file?
Click to expand...
Click to collapse
yes but no luck im afraid my wfi is plus com sd
any help on the thanks
rgds basic
basicbri said:
yes but no luck im afraid my wfi is plus com sd
any help on the thanks
rgds basic
Click to expand...
Click to collapse
hey muckelmaus your a bloody diamond' ive just got the thing working on those drivers you gave me' thanks a lot, i did not have my bluetooth on, also sorry to be a pain but could you give me a working link to any opera that will run on my system im using 6.55 from aero and is there a fix to update those graphic drivers to make it a bit more clearer, and last which version of tetris will run on my phone please from this link below.
http://www.elementsgames.com/stris2/downloads.php
thanks again your the best
rgds basic
basicbri said:
hey muckelmaus your a bloody diamond' ive just got the thing working on those drivers you gave me' thanks a lot, i did not have my bluetooth on, also sorry to be a pain but could you give me a working link to any opera that will run on my system im using 6.55 from aero and is there a fix to update those graphic drivers to make it a bit more clearer, and last which version of tetris will run on my phone please from this link below.
http://www.elementsgames.com/stris2/downloads.php
thanks again your the best
rgds basic
Click to expand...
Click to collapse
Take either landscape or portrait QVGA ARM version. It belongs on, what you prefer. The smartphone versions are smaller than the PPC.cab files!!
Search for opera mini windows mobile, works great!
Wififofum2 and Hitchhiker are well known wardriving-tools, but wardriving isn't legal everywhere!!! And they need .netcf 3.5 or 3.7, you loose additional 6.5MB free program-ram. There is a mobile version of the network stumbler around, too.
The best way to get 1h free internet in Germany , is to visit a fast food restaurant (the one with the golden arches).
i have tried various ways to install tt5 but still no luck.
I'm running an XDA II with WM2005 1.60c
activesync 4
any help gladly received
I'm having the same problem.
The install (sd card version) works but then it turns my backlight to low and hangs my M1000
Tomtom5 installation
i have just installed tt5 on my xdaII and it works with wm2k5. Although i have to admit to it, It did need tweeking and loaded the files using an sd card. There is another thread on this site with details on how to do this.
any problems let me know and i will gladly help.
I´v got the same problem with the backlight.
Anything to fix it?
Salu2
Fixed it!!
Just overwrite the tom tom navigator launcher for this one:
http://forum.xda-developers.com/download.php?id=8133
Salu2
Help please advice, after the next installation WM5 on communicator O2 XDA2 he when enabling LEAVES In WHITE SCREEN. Before this installed the ensemble once (all time aptly). Try presently to install, but program writes - a device is not connected. And different Activesync tried and WM 5 and WM 2003SE tried to install - nothing be not got (Hard reset too tried). Has Tired already.
As him brains to wash?
Please help somebody!
Sorry if I little speak english
Recovery possibility
You should try recovering using ROM image on SD card.
I am new to this forum, but it should be possible to save a ROM image to SD card and then use this card to load the ROM of your device.
Search for other posts on the forum about how to reprogram the ROM from SD. Good luck!
Upgraded XDA2 running 2003 to an XDA Mini S running 2005. Programmes that I previously had running on 2003 (Amirsys/Elsevier -Pocket Radiologist series). Despite many suggestions and help from Elseviers techies in St Louis they now think it's an incompatibility that cannot be overcome. Has anyone any experience of patches etc or are these programmes now completely useless.
Having said that, I find the functionality of 2005 good with calls made and taken whilst running TomTom 5.21 - which is a vast improvement!
I think the only way is to watch out for a new version which is WM 5 compatible.
But I don't understand how u can make an XDA 2 to an XDA mini s with an rom upgrade? I think u mean something different.
cu
No. I've changed my XDA2 to an XDA Mini S (wizard) which is why I'm now using WM5. Kind of wish I'd stuck with WM3.
Looked in profiles but no option for newer phones
No. I've changed my XDA2 to an XDA Mini S (wizard) which is why I'm now using WM5. Kind of wish I'd stuck with WM3.
Looked in profiles but no option for newer phones
Hello k.griffin (& anyone else who is trying to get the Amirsys soft running under WM5),
I have some "older" programs that won't run on my new Wizard as well (including your example of Amirsys Pocket Radiologist, and, e.g. a PPC dictation program). I think this is an issue for everyone trying to migrate software to WM5 devices, and it is primarily associated with the new flash architecture of WM5.
I posted some questions regarding the Pocket Radiologist software to Elsevier, too. They said a WM5 version is being prepared but nothing has happend for quite a while now.
Interestingly, I have read forum posts that claim that by chance some people had discovered this software (and several other programs that usually can't cope with the WM5 flash architecture) will run after installing the "Arabizer" suite. This is said to be associated with changes in flash memory handling when this peculiar package is installed.
So my question to everyone who is familiar with WM5 and its memory structure: how plausible is that (at the moment I am thinking of ~1% ) ? I am rather unwilling to check it out blindly, because I am not fond of getting into long hours of installing and uninstalling tools for arabic character sets [that I don't need..] in vain..
Can anybody provide some statements on that ?
there is a hack for pocketradiologist so it work with wm5,
let me search it in my harddisk and will post it,but its seem its illegal
Arabizer
I installed Arabizer, but it doesn't makes a difference !
Who has the magical hack or can fix it in the registry ?
IPAQ RW6815
help
pdafre4k said:
there is a hack for pocketradiologist so it work with wm5,
let me search it in my harddisk and will post it,but its seem its illegal
Click to expand...
Click to collapse
Can you say me if i can use pocketradiologist with wm5 and how ?
I'm in france but I love USA.
Tnx ([email protected])
Hey guys!
Send me that fix too please!!!
My email is [email protected]
See ya all
thank you all !
http://www.4shared.com/file/4123375/41e3e80e/pocketradiologist.html?s=1
at last found wm5 working version by ifalleni !
thanx for all the support folks.
When I try to install ADOCEforMIMSonPDA in the device or in the sd card says: "Failed to load resource DLL MSDAERES.DLL"
What can I do?
Tnhxs
jumanji1212 said:
When I try to install ADOCEforMIMSonPDA in the device or in the sd card says: "Failed to load resource DLL MSDAERES.DLL"
What can I do?
Tnhxs
Click to expand...
Click to collapse
AFAIK the file "MSDAERES.DLL" is part of M$ VB runtime for PPC.
I will try to install it on my PDA this afternoon and let you know.
cheers.
I was able to install pocket radiologist without any problem.
First I installed ADOCE.WM5.CAB, then READER APPLICATION.PPC_2577.CAB and CHEST 100.PPC_2577.CAB.
It's quite good except the radiographs are quite small on PDA screen.
What operating system is on your PDA?
cheers.
ttangcho said:
I was able to install pocket radiologist without any problem.
First I installed ADOCE.WM5.CAB, then READER APPLICATION.PPC_2577.CAB and CHEST 100.PPC_2577.CAB.
It's quite good except the radiographs are quite small on PDA screen.
What operating system is on your PDA?
cheers.
Click to expand...
Click to collapse
Hi ttangcho,
thanks for replying. My operating system is WM5. My pda is a qtek 9000 with Spanish Rom. I tried making a soft reset before installing it, and later I tried a hard reset getting the same message in both actions.
I first tried to install ADOCEforMIMSonPDA from WM5 file but i got that message. So couldn´t keep on going.
What would you recomend me?
Thanks in advance buddy
jumanji1212 said:
Hi ttangcho,
What would you recomend me?
Thanks in advance buddy
Click to expand...
Click to collapse
I'm using WM5 WWE and I installed it after hard reset.
Try to install Ms VB Runtime on your device first. This VB runtime includes "MSDAERES.DLL". I hope this work. By the way, I installed it successfully without VB runtime.
cheers,
ttangcho said:
I'm using WM5 WWE and I installed it after hard reset.
Try to install Ms VB Runtime on your device first. This VB runtime includes "MSDAERES.DLL". I hope this work. By the way, I installed it successfully without VB runtime.
cheers,
Click to expand...
Click to collapse
I´ve got an error message when i install th Vb runtime too.
This is amazing!!! DOn´t know what to do
Any idea?
ok, now vb runtime is installed on my device in the main memory without any problem. I have also installed adoce without any problem on my sd card, but i cannot find the adoce files as a program or even in the file explorer.
do i need to install any of the modules first and then substitute by the crack file?
thanks for all your help guys
jumanji1212 said:
ok, now vb runtime is installed on my device in the main memory without any problem. I have also installed adoce without any problem on my sd card, but i cannot find the adoce files as a program or even in the file explorer.
do i need to install any of the modules first and then substitute by the crack file?
thanks for all your help guys
Click to expand...
Click to collapse
Good to hear that you were able to install the program. VB runtime is way too big to put in the main memory. If you want to install VB runtime on the RAMdisk or SD card, do the followings.
1. Create "\RAMdisk\Windows" directory
2. Open your reg edit program and add \RAMdisk\Windows\ in the SystemPath
[HKEY_LOCAL_MACHINE\Loader]
"SystemPath"=\RAMdisk\Windows\ \Windows\..............
(Note. this is Multi_SZ)
or you can cut and paste the following and add to your registry.
----------------------------------------------------
REGEDIT4
[HKEY_LOCAL_MACHINE\Loader]
"SystemPath"=hex(7):5c,5c,52,41,4d,64,69,73,6b,5c,5c,57,69,6e,64,6f,77,73,5c,\
5c,00,5c,5c,77,69,6e,64,6f,77,73,5c,5c,6f,65,6d,5c,5c,00,5c,5c,52,65,6c,65,\
61,73,65,5c,5c,00,00,00,00
----------------------------------------------------
3. Soft Reset using SOFTWARE or power off and on couple of times and soft reset using your stylus.
4. Install VB run time on your RAMdisk.
This is how I did in order to install VB Runtime (3MB) and M$ .NET Compact platform 2.0 SP1(2.2MB) on the RAMdisk.
Cheers!
TTangCHo
thanks you all buddies, it worked, at the end, but worked!!!
now i can go with all pocket radiologist on my handheld device, it´s really amazing!!!
see ya in another life brother
lipe said:
http://www.4shared.com/file/4123375/41e3e80e/pocketradiologist.html?s=1
at last found wm5 working version by ifalleni !
thanx for all the support folks.
Click to expand...
Click to collapse
Hi, the link is not working any more,.
any one who can upload it again please, or another link to download it,,???
Hello,
I have just upgraded my treo750v with 2.27. I have strictly followed the process and everything goes well even replications.
The only issue is the fact that I can't activate anymore my phone. When I try, device tells me : "A problem has occured with device.exe / please tell Microsoft about this problem....".
Other issue is that when I want to recover following your process, I find the folder but there is no T750URT.exe nor any other file.
Hereafter my configuration :
Windows XP SP2
Activsync 4.5.0 build 5096
phone id : Can't give as each time I want to get it, I have the waiting icon then "A problem has occured with device.exe / please tell Microsoft about this problem...."
Memory free : 36MB
Can you someone help me ? Even send tell me how to get a former SW with WM5.
Thanks in advance,
perform the upgrade again using the SD version (or extracted cheeimg_fw.nbh from updater) and KaiserCustomRUU.exe (search for file and how-to).
Then run UpdInfo.CAB (extracted from updater) to set version to 2.27
Hi,
Tks for the steps
For SD update it is OK.
I can't find anything clear enough for Kaisercustommruu.exe.
Issue solved
In fact, issue was coming from a wrong installation. I consequently unzip the download file (treo 750.....device installer) with winzip (can also with winrar) then launch T750URT.exe.
The recovery tool launch a new instal and everything goes well now.
In all cases, tks for your help and this great forum which teaches me a lot of things on my Treo 750.
Excellent, glad you figured it out!
The gist with KRUU.exe is to rename the file from "cheeimg" to "RUU_signed"