IS My XDA II A Brick? - MDA II, XDA II, 2060 Windows Mobile 2005 Upgrading

This is just not my day!! I have to admit this site is a wealth of information. It is truly impressive! Shouts (and beer) to Buzz!
Here is what i have:
O2 XDA II
Rom: 1.03ooUSA
Radio: 10513A0
I backed up the ROM/RAdio with Romupdate.exe ... and i even retested the backup to ensure it worked. I proceeded to install Wm2k5 1.65b.96WWE ... everything went well. After the cold/hard reset the O2 splash screen froze only displaying the Radio version number. I proceeded to reinstall to backup ... it was successful but again te device freezes at the splash screen while displaying only the Radio version.
HELP Would Be Greatly Appreciated!!!!!!!!!!!!!!!!

i would try putting it in bootloader mode and connect it to the pc and try to reflash it with 2005 or maybe going back to 2003

Related

Stuck at bootloader

Hi,
I have XDA Neo and last night, I upgraded my Neo (G4) to jesterz AKU 2.3 ROM with 8MB poolsize and after successful upgrade, I get first bootscreen with IPL, SQL and GSM but nothing happens after that as it just get stuck at this screen. Then I am resetting this device and then it gets into bootloader screen. I have tried doing hard reset using Comm+Camera+Reset Button but it doesn't halp as well...as it gets into bootloader again.
Could you guys help me to get my device working again?
Thanks.
downgrade to an original rom
I'm stuck in the same problem.. My XDA stops at the O2 Boot screen, showing the IPL (2.15.0001), SPL, GSM and OS.. and nothing happens..
And I can't downgrade or even upgrade to another OS version, 'cause any I ran RomUpgradeUtility says that the pda isn't connected to the PC..
Remembering: I am not stuck at the 3 colors bootloader screen. I'm stuck at the O2 IPLs BootScreen, where I am not able to communicate with the computer by USB..
What should I do now?
Thnx
Abib said:
I'm stuck in the same problem.. My XDA stops at the O2 Boot screen, showing the IPL (2.15.0001), SPL, GSM and OS.. and nothing happens..
And I can't downgrade or even upgrade to another OS version, 'cause any I ran RomUpgradeUtility says that the pda isn't connected to the PC..
Remembering: I am not stuck at the 3 colors bootloader screen. I'm stuck at the O2 IPLs BootScreen, where I am not able to communicate with the computer by USB..
What should I do now?
Thnx
Click to expand...
Click to collapse
You people should read before touching custom ROM's!
Hold both the camera and comm button to get in the 3 color screen. Then flash with an original ROM.
Wilson77 since you have a G4 device you can't just flash it with any ROM. Check the forum on flashing your G4 device.
Mccune, you're right.. curiosity suX!
I did the Bootloader Procedures (Camera + Reset) and now I'll try to downgrade to the shipped german rom, and then to the English Crossbow that ran nice since January..
But Thanx for the help!
Abib said:
Mccune, you're right.. curiosity suX!
I did the Bootloader Procedures (Camera + Reset) and now I'll try to downgrade to the shipped german rom, and then to the English Crossbow that ran nice since January..
But Thanx for the help!
Click to expand...
Click to collapse
LOL Noting wrong with cuiosity, on the contrary. But flashing the wrong way (specially the G4) may brick your device. Were just tryin' to prevent that by providing you with a lot of information

NO WM6 release working on my Qtek S200, Aserg WM5 3.13 works fine

I think I have always followed the steps right, but still no succes in booting into WM6. After the hardreset it always stops on the splash screen showing the versions.
I have tried all the versions found here at xda-developers.
It is strange but when I try the ASERG 3.3.13 ROM everything is OK. I am able to boot correctly.
What could be wrong? Is it something with the SPL?
Is there a possibility to debug the boot process?
I have following versions:
IPL 2.09
SPL 2.20.0000
GSM 2.47.21
The device is CID unlocked.
Thanks for every advice.
PiGeonCZ,
Try this:
When doing flashes, usb connect using Active Sync v.4.5, connect as "guest" to sync. Windows XP only. Reboot computer once before starting.
First, very important, flash to the last official wm5 vendor rom of choice. The last I-mate, HTC/QTEK rom is fine. If you're CID unlocked & SIM unlocked, you can use any rom.
For upgrade step 1, download & use this temp rom (PDAviet Temp) to get to first:
http://forum.xda-developers.com/showthread.php?t=308266
Remember, use no other NVID rom out there for this step 1.
Upgrade Step 2: Use this rom for wm6 upgrade: Trueneytral 1.4 with MS Bluetooth stack
http://forum.xda-developers.com/showthread.php?t=302067
If this doesn't work, please let me know.
Hi DevilDuck, thanks for the reply, but no luck again.
This time with device of another my friend, also CID ulnlocked and with the same versions of IPL and SPL.
I am using WinXPSP2 ActiveSync 4.5.0
I did it in following order.
1. update RUU_Prophet_220734_2207114_024721_QtekWWE_Ship.exe - succesfull
2. tab to see the align screen
3. update Prophet_PDAViet_Step1 - succesfull
4. tab to see the align screen
5. write Prophet_WM6_17913_TrueNeytral_1_4MS - succesfull
6. hardreset
7. stuck on the second splash screen again
So I have tried to write the AKU3.3.13.ASERG-us on this device too and yes it booted succesfully.
I think I have tried all possible combinations and ROMS already, but no luck with WM6.
Any idea?
thanks
Same issue
I have the same issue. I tried all available WM6 ROMs. No success. Please help!
is there a tutorial on how to upgrade to WM6?
guide here: http://forum.xda-developers.com/showthread.php?t=310452
on the second splash screen WAIT 1-2 maybe 3 minutes....

Orange SPV M600 (HTC Prophet) Stuck in Bootloader

Guys,
I wonder if you can help. I have trawled this and many other forums and found many people that are having problems with their HTC Prophet or variations of the same device.
I have the Orange SPV M600, it was in my pocket and when I took it out to turn it on, it was displaying the bootloader screen after seemingly soft resetting itself. It is displaying the tri-colour bootloader with the following IPL/SPL
- IPL 2.10.0001 - SPL 2.10.0001
I have tried the following things that I have found in the forums:
1. Taking the battery out for 10 minutes ~ Still the same.
2. Hard Reset ~ I get the "Press SEND button to factory restore" message
but nothing happens when I push the call button.
3. Reflashing the ROM ~ I am unable to do this. I only have Vista and
WMDC does not see the phone in bootloader mode.
Is the phone dead? If so how could this have happened?
If anyone could help I would be eternally greatful. Oh and to add another complication the phone is still CID Locked
Thanks in advance
Barry
well if you where is south africa i would of helped you im sure if you have it runing on xp it will work my jamin did the same and all i did was push the camera button and reseted it got into tri colour mode and reflashed it
sorry that i could not help you but like i said if you in SA we could of tried it on my mashine
Any progress ?
did you ever get this sorted out ? Surely all you're gonna need is a PC with XP and active sync....
If I was closer you could have sent the phone to me and I would have had a go at reflashing the rom, but I'm at the other end of the country....
Hello guy here is a solution to flash under vista i have too a orange m600 and it works fine
http://www.modaco.com/RUU-Vista-done-u-t252977.html
help stuck on the bootlader screen?
guyz i have a jamin.. my cousin was flashin it and flashed the wrong software.. if i reset the phone it shows the boat loader screen!! and i cnat do anythin..caz u tell me which slftware to flash..and how to do it?? My freind told me all solution to my problem's will be solved here
hopin i will get my solution
First of all, download the NVID (no vender) AKU2.2 from here. http://rapidshare.com/files/17208693/RUU_Prophet_220734_2207114_024721_NVID.exe
Then, open activesync, select connection settings and UNCHECK the connect through USB option.
Then run the NVID file. It will take a while, and may seem to get stuck at 80% or 95%. Just leave it alone.
When that's done, you can either use it as it is, or load anyother ROM you want.
i have a bit similar problem
can some one plese guide me how to flash it with xp?????
Regards
First get a version of ActiveSync, any will do, but more recent is probably better. Then download the ROM (see above). In ActiveSync>Connection Settings uncheck the Connect through USB option. Then connect the Prophet.
Next Unzip the NVID file, and run RUU_PROPHET... This will flash your Prophet with a very basic ROM. If you then want to upgrade to a different ROM follow these steps: http://forum.xda-developers.com/showthread.php?t=310452

Palm Treo 750, stuck in bootloader ROM flashing not working

I had to hard reset my palm, as it was stuck at windows screen. It had WM6.
Now it does not go beyond bootloader screen.
Tried, the following
1. Palm recovery tool, connection gets lost
2. Tried ROM flashing with the WM6 ROM (CHEEIMG.nbh) with 2GB Mini SD card with FAT 32 formatting, does not progress, it gets stuck no progress even after one hour.
Not sure what to do next, any help is greatly appreciated.
Hi mohaninusa2003, looks like your waiting for a reply since a while. Here you will find all the answers connected to your issue. Probably you did already but just incase have the link
http://forum.xda-developers.com/showthread.php?t=366771
Thanks hammod2k, I have tried all the suggestions on the thread. Still when flashing the original rom, it does not go beyond Bootloader -ok hans at GSM, left overnight for flashing, still not working.
Tried Mtty, set 14 0/ task 28 55aa /
Tried to flash Hard SPL, bit it is not successful, I am getting an error "Image file is corrupted".
I will keep searching threads and reading..in the meantime.
recovery tool
my friend where i can find the recovery tool? i been looking for it but nothing even on the palm suuport page? thanks in advance
regards from lima
mohaninusa2003 said:
I had to hard reset my palm, as it was stuck at windows screen. It had WM6.
Now it does not go beyond bootloader screen.
Tried, the following
1. Palm recovery tool, connection gets lost
2. Tried ROM flashing with the WM6 ROM (CHEEIMG.nbh) with 2GB Mini SD card with FAT 32 formatting, does not progress, it gets stuck no progress even after one hour.
Not sure what to do next, any help is greatly appreciated.
Click to expand...
Click to collapse
stuck on boot loader
hey mohaninusa2003..
I exactly have the same problem bro..it hangs up on gsm...i tried removing my card and hard resetting it but it just brings me to a tricolored screen red green and blue with the word serial at the bottom...tried soft reset but still the same thing..hope someone could help us on this
Hey fguimet,
Please follow the link and look at post 9 for the file,use the Desptop update method file and extract using winrar to get th file you are looking for. hope it helps,
http://forum.xda-developers.com/showthread.php?p=1714416
Sorry to bother but i have a few questions...i have a 750 treo and none of the support on this website is helping...i am trying to flash my palm 750 but its says the file is corrupted..what do i do about that? Progress only reaches 7% ive used cheetah and kaiser unlockers and i was also wondering if it can be flashed just using the computer and usb in booter mode since it wont go past the palm splash screen...i can access my treo using mtty but doing task 2a doesnt do anything either... I think that maybe my phone is screwed up. I appreciate any help you can offer.
I have almost the same problem with my Palm 750 that I believe locked to Rogers.
1. It hangs on GSM if I use SD card ROM file CHEEIMG.nbh . I have tried many different CHEEIMG.nbh files (ATT, Cingular, ROW…)
2. Running CheetahUnlocker will crush at 7%, and my Palm 750 will reboot and freeze at MS Mobile screen.
I have the same problem, and I think we have to change the IPL and after run cheatunlock.
How can we do it?
on my treo I have hard-spl'd but still i cant manage to flash a rom
My Bootloader screen results:
CHEE100
IPL - 0.20
CHEE100
SPL - 1.40.0liNex
______________________
it starts, gets to about 4-7% and then it says:
|00018003
|CHEEIMG.nbh - FAIL
|
|OS - Fail
|
|
|
|Update Terminate
|UPDATE FAIL
i have no idea what i am doing wrong
it all started when i tried to flash a wm 6.5 os and it didnt work... i was just randomly stuck on the bootloader screen
Swarford

WM 6.5-Device doesnt boot anymore

Hello Guys,
yesterday i startet a backup-process with PIMBackup and i've chosen the wrong destination-path.
So it backed up all my Data to the root-Directory.
Now my Device doesnt boot anymore. It alwas hangs on IPL.
Radio an ROM-Version is shown.
Is there someone who got an idea, how i can delete files from my root-directory?
i have a htc touch Diamond.
Thank you very much!
Bootloader-Mode can be entered, i just dont want to flash the device again
I'm going to flash it again.
Thread can be closed/deleted

Categories

Resources