Hi,
I upgraded to 1.60c today with great success. Thanks for all the effort that went into making this happen. After the upgrade the AS4 does connect though. It does detect the device and the wheel keeps spinning and eventually stops. New device detected lets pair it dialog does not pop up. Also on the device side I do not see AS pop up at all which used to be the case with WM2003SE. Can anyone help me out here? What should I do to get this going?
Thanks & Best Regards
This might help:
http://www.microsoft.com/windowsmobile/help/activesync/default.mspx
Thanks. This was a good pointer. I have Checkpoint VPN client on my work PC so I stopped it but this made no difference. I will try again at home tonight. Appreciate your help.
Do you connect to an Exchange Server to get e-mail? If so then you may need to establish a connection between Outlook and the Exchange Server on the first sync... either by attaching to the corporate LAN or connecting through VPN. It may also help to delete the computer partnerships off your PDA, and any profiles out of AS on your PC.
If this doesn't help, search the forums for Activesync... there are a few threads about such problems....
use the activesync 4.1 or latest
Related
Well, just got hold of the Blackberry Connect Client V4 and installed in on Windows MObile 6. Install is fairly slow, but gets there in the end. Took a while for the BES to send all my messages across, but calendar, contacts and notes syncing is working well. Less painful than the HEX edits etc that people use to get older versions working.
Oddly the device now turns itself off when power gets below 30% - maybe theres a way to change this. Alos, due to my corporate IT policy I don't see a blackberry browser in the blackberry software. Anyone know how or if its possible to install one? Apparently with V4 you can use the MDS server for mobile data as with the blackberry device.
BTW, got the client, desktop manager and manuals etc from http://www.sems.org/entry.asp?ENTRY_ID=225
Now if I could just get MDS working ...
Guru Meditation said:
Well, just got hold of the Blackberry Connect Client V4 and installed in on Windows MObile 6. Install is fairly slow, but gets there in the end. Took a while for the BES to send all my messages across, but calendar, contacts and notes syncing is working well. Less painful than the HEX edits etc that people use to get older versions working.
Oddly the device now turns itself off when power gets below 30% - maybe theres a way to change this. Alos, due to my corporate IT policy I don't see a blackberry browser in the blackberry software. Anyone know how or if its possible to install one? Apparently with V4 you can use the MDS server for mobile data as with the blackberry device.
BTW, got the client, desktop manager and manuals etc from http://www.sems.org/entry.asp?ENTRY_ID=225
Now if I could just get MDS working ...
Click to expand...
Click to collapse
Hi, which version of WM6 did you use? Also, have you got MDS working yet?
Hi,
I tried bb connect 4 on WM6, Laurentius WM6 Pro Business Release V7
it didn't work...
somebody knows how to run BB connect??
thx
blackberry connect WM5
Wondering anyone got luck getting bb connect to work on HP IPAQ hw6955?
I have tried few bb connect version but none of them worked it is stuk in Pin Pending. Anyone knows of a fix or knows if HP been test please let me know.
Thanks in advance
BB Connect - Desktop won't connect to device
I was trying to get my Universal to connect to the Blackberry Connect Desktop for Window Mobile Devices. I followed the install guide and from what I can tell it seems like active sync is still blocking the device from talking to the blackberry software. When I disable the USB connect option in activesync the device cannot be seen from the laptop at all.
I am using BB desktop software is 4.0.0.17 and BB connect software on device is 4.0.0.67. Active sync is 4.5
My understanding is you has to activate using the desktop method and it can not be done wirelessly. I did try wirelessly and I get Service: "not connected".
Any help or ideas are appreciated.
Blackberry Desktop Manager USB Driver
Wrong forum, sorry
on some devices you have to go into the registry and change the AKU to 0.4.2 can someone verify I am scheduled to pick up a Universal this week and need bbconnect capability
I had working ActiveSync without problems (configuarated the Com a.s.o.)
but after the last hard reset i cant connect my phone over active sync... my Kaiser shows "no activesync supported pc...)
what can i do?
greetz SciLor
Report this post
did you redo the pairing?
WORKS again...
reinstalled activesync 3 times but thank you!
Hi,
I know this is an old thread but i wanted people thoughts on Activesync over Bluetooth?
What issues are there and how reliable is it?
Im using WM6.1 and plan to sync with Outlook2003 on XPpro sp3.
Thanks
I find activesync via bluetooth very reliable, although not fast enough for transfering large files.
Best way to get it working properly is:
Delete any existing pairings on both the pc and ppc.
Check that the bluetooth program on your pc has a com port set up and that your pc is discoverable.
Go to activesync connection settings on pc, and check that it is set to use the same com port as the previous step.
On ppc, go to activesync and attempt to 'connect via bluetooth'.
When it doesnt find a connection, select to create one, add device, and create a partnership with your pc. It SHOULD find activesync as a service.
Now you can close the bluetooth menu, and 'connect via bluetooth' again.
(this would probably have helped the OP 20 months ago)
I have installed the latest ROM from Dutty.
I have re-installed everything and paired with BT headset. Using Voice Command with headset no problem.
What I have not been able to figure out is to get Activesync working thru bluetooth. I have it paired with my laptop put it only gives me the option for Dial up networking for services.
Everything else is working better than ever and this ROM makes me appreciate my Tilt even more.
Any suggestions?
I suggest you post this question in his latest ROM thread. That is a more appropriate place to post this questions.
good luck.
Anybody have any suggestions on this issue.
This is the only thing I have not working. Just fixed VC1.6 Call announce.
Any help would be great.
To begin, delete your computer from your paired-devices list on the kaiser, and also delete your kaiser from your computer's paired-devices list.
Now, begin the process of setting up a BT connection on the kaiser, but to be able to use Activesync over bluetooth, you need to enter a password with more than 6 (possibly 8, but I think it's 6) characters. Once that's done, you should see Activesync in the services list.
BUT it has to be a "new" pairing, so be sure to delete the devices from each others' lists first. Otherwise, it won't work.
TerraNocuus said:
To begin, delete your computer from your paired-devices list on the kaiser, and also delete your kaiser from your computer's paired-devices list.
Now, begin the process of setting up a BT connection on the kaiser, but to be able to use Activesync over bluetooth, you need to enter a password with more than 6 (possibly 8, but I think it's 6) characters. Once that's done, you should see Activesync in the services list.
BUT it has to be a "new" pairing, so be sure to delete the devices from each others' lists first. Otherwise, it won't work.
Click to expand...
Click to collapse
This is how I tried to setup after a hard reset to the Tilt and I deleted the pair from my computer. I can pair the laptop to the Tilt. But the only services I get available are Dialup Networking and Network Access. When I try start ActiveSync from the computer it says I do not have a partnership that supports and when I try from the computer it tells me the Tilt does not support that service.
Thanks
cephus6 said:
This is how I tried to setup after a hard reset to the Tilt and I deleted the pair from my computer. I can pair the laptop to the Tilt. But the only services I get available are Dialup Networking and Network Access. When I try start ActiveSync from the computer it says I do not have a partnership that supports and when I try from the computer it tells me the Tilt does not support that service.
Thanks
Click to expand...
Click to collapse
make sure that activesync is set to the com port that you have defined as an incoming com port for you bluetooth (on the pc, not the phone). how to do this.......it all depends on what bluetooth stack you are using.
Finally got it.
The COM port matched in ActiveSync, but I discovered the bluetooth on my laptop would not delete my old version phone. It said it deleted, delete, close, reopen and it would reappear. Once I killed that everything worked like a charm.
Thanks for everyone's help and thank you Dutty for your work.
Has anyone been able to get ActiveSync to work over Bluetooth in Vista with a 2125? Which English ROM will I have the best of luck with as my USB Bluetooth on my desktop computer running vista ultimate x86 keeps telling me that my phone doesnt support activesync over bluetooth.
Also where can I get the Stock Cingular ROM for my 2125?
Can anyone point to to a guide on how to set it up?
any ideas?
many thanks,
SG
No one has because you dont need Active Sync in Vista, Vista comes preloaded with Windows Mobile Device Centre
Sorry I meant to say "Windows Mobile Device Centre"
I cant tell if it is becuase of my USB BT Dongle or my 2125. When I try to esablish a BT ActiveSync connection from my 2125 it says there is no partnership setup with a computer that supports activesync. yet I believe my BT Dongle does.
Any ideas?
SomeGuy2008 said:
Sorry I meant to say "Windows Mobile Device Centre"
I cant tell if it is becuase of my USB BT Dongle or my 2125. When I try to esablish a BT ActiveSync connection from my 2125 it says there is no partnership setup with a computer that supports activesync. yet I believe my BT Dongle does.
Any ideas?
Click to expand...
Click to collapse
Have you done a wired sync with that computer before? If not, you should do it. I've read that in the past. It fixed a sync problem with one of my phones, however, I've done it w/o too and it works. Have you created a BT Partnership between your computer and your phone? When you create the partnership, click on Advanced, re-confirm the PC name, then on the Services Window, checkmark Active sync. Then open active sync on phone, and click on right menu and chose Connect via BT. It should work. Good Luck!
EDIT: The partnership has to be created from the phone, not from the PC. If created from the PC, as far as my experience, it'll create a Modem Dialup connection partnership that will allow the PC to connect to the internet via BT using Wap connection on your phone. If you do want to create that too, use *99# as the dialup phone number. Leave blank the User name and PW.
Thanks for the reply.
When I try to setup a partnership from the phone I see my computer but I only see 3 service. Stereo somthing, handsfree, and something else but none of which are active sync. Yet when I look on my computer I see that activesync is in the list and selected.
I have a IOGear BT211 (Broadcom 2045) USB Dongle running in Vista Ultimate SP1.
Could it be my BT211 Driver? I have the latest version 5.1.x
Thanks,
Well the new phone I bought has all the drivers for Vista on CD. But its installed on my son's Laptop and he don't let daddy get nearby his toys LOL so, I really couldn't help more. I do know active sync works over BT with Vista. So I guess you'll have to keep trying. Do you have any instalation CD for your phone? From what I remember, if you don't have the "Outlook" that comes with the phone instalation, you might not be able to. I remember it didn't work untill we installed the one on the phone CD. All though, his Laptop had MS Office already installed. So... take a look around that.
My Bad. I had the wrong Window drivers installed for my BT on my desktop. LOL. Who would have though that the Windows XP drivers wouldnt work under Vista? lol
Thanks for the help.
GD
activesync (Windows Mobile Device Center) via bluetooth on Vista
I went through a similarly difficult experience with a Lenovo laptop. I blogged about it here:
http://mitchwyle.blogspot.com/2008/11/activesync-via-bluetooth.html
Hi all,
I have a problem I'm hoping someone can help me with.
My t-mobile wing's screen has gone bust, and I am trying to get my contacts and calendar from it. I can not use active sync in XP, but I can get it connected to a laptop running Vista. I was able to copy the PIM.VOL out of it.
Is there a program that can extract the info from this file?
I have heard of ppcbackup.exe but when I try to install that on my pc, i get an error message saying this is not a win32 application. Your help is greatly appreciated!
In your case, I would use SOTI POCKET CONTROLLER since your device still starts up. Itbrings your device's screen to your desktop.
SOTI POCKET CONTROLLER is commercial but you can use their TRIAL VERSION for this particular circumstances.
You can connect via USB (ActiveSync, WMDC), Bluetooth or Wi-Fi.
awesome, thanks!