I took Mda Compact from Germany last week and to work on english I upgrade its rom with using WWE_11200_128_11210.zip . As all knows that the main absence on our devices is an embedded wifi, therefore I took Spectec sdw-822 minisd wifi card. I installed its latest drivers, connect with minisd adabtor(only 6mm overflow at the top) and when I try to connect on to a wlan there is no problem I can see that the signal strength and quality is good and connected, but when I try to use i.explorer (or other applications need internet connection) there is no response, "the page you are looking for cannot be found" message seen on the screen. I checked all points and it takes the ip address correctly but there is no chance.
Briefly I couldnt use wifi on my magician.
May be experts knows that there is a solution to this problem and also I wonder what is the difference between WWE_11200_128_11210.zip and WWE_11200_131_11210.exe ?
As you can connect the driver sounds like its working ok, It sounds like its your DNS settings on your Wi-Fi network.
I would suggest you try and "ping" an internet address, this will tell you if you are connected into the internet. I use the ping app in WiFi companion but I'm sure there are others out there.
Thank u very much ampda, the problem is solved when I turn of the encyrption. It is not possible to surf on net when I enable wpa or wep64/128 on my adsl router. Is it normal? I dont want to open my connection to my neighbours, how can I solve this?
both wep 64/128 are easy to crack, so dont bother anyway
without transfering any data what does it mean "easy to crack" :wink:
Related
Hi again and again folkes!!!
I recently instaled the (in)famous bluesoil bt stack that was found in a recent topic here at xda... first impression was good but... there is always a but... i've noticed that it ****s up my gprs connection and my modem settings... gprs network card disapears even when i return to MS BT... any soluction to solve this problem? i use the S110 to connect to msn in a regular basis and it sucks not being able to use it... and if someone bothers.. how (dont know if its possible) to stream video/sound from my pc via bluetooth and how to acess shared folders in my pc from the pocket also via bt? i already set auto ip(DHCP) in both... no way... assigned ip's in both and still nothing. If someone give it a time to post a How-to about PAN and VCN(control pc with pocket via bt) and other nice but strange to most users it would be very apreciated.
Deactivate the GPRS before installing
which installer of blusoleil stack do u use? is it the xxx.r2.arm ?
in this case the gprs problem should not appear, otherwise, you have to disconnect the GPRS so that only the white "G" appears.
installing the stack with shown the "G" only the GPRS Settings will work well after installation.
but another question, do u use the pan? and if its working for you
can u PLEASE post all the settings of your 3 lan adapters (btpda btwin and lanwin)
*gate/ip/dns/sub for each adapter and the ics on which adapter.
i'm getting the same error message every time if i try to activate the ics.
(like: 192.168.0.1*needed for ics could not be assigned, the ip adress is assigned to another pc in the network) i'm using german xp, don't know the exact words.
after reading 1000 posts and trying this all the last week and the pan won't work.
thx for every tip
greets phr³³k
I hope some of the more experienced Qtek users can help, I am really happy with my Qtek 9100 in the most part, I can use the internet explorer and outlook features when I connect to the internet via the USB cable via my laptop but when I want to connect to wifi connections in hotels etc or hot spots when travelling and try to access the wifi connection as usual it asks me for the password, I enter the password but am never able to connect to the web can any one help, it's driving me to despair.
Cheers
first of all (and i'm aware it's a stupid comment), notice you're not backspacing your chars when entering the password.
secondly, check your network definitions for anything weird which might interfere with connecting to the networks..
and make sure they are free to use hotspots, alot in airports arent..
Hello. I am having a Sony Ericsson Xperia X1 WM6.1 Device. Recently, I've tried internet sharing via USB and it doesn't seem to work. My idea is to be able to have internet connection on my phone via USB that connects to my main computer that has ADSL connection.
After pressing 'Connect' is successfully connects but any internet usage I've made is via my EDGE connection, not ADSL.
According to Windows Vista Internet Sharing Center, my phone's network access is 'Local only' as apposed to my normal LAN connection which is 'Local and Internet'.
I've searched for a solution and I came to this http://support.microsoft.com/kb/928233 but it still does not work.
Apart from the problem of Internet Sharing, my WMWifiRouter can't seem to work also.
As far as I know, WMWifiRouter will need to have Internet Sharing to work first, so it's normal that it is not working. However, I found a rather interesting message whenever I connect the 'USB to WiFi' mode. A pop up box with the tile 'Pocket PC Networking' will say ' cannot obtain a server assigned ip address. try again later or enter an ip address in network settings'.
Can anyone share with me the proper IP address for WMWifiRouter on my PC and on my WM device?
Anyway, just to describe the problem I'm facing when I'm using WMWifiRouter.
1. I connect 'USB to WiFi', everything seems to work fine, the status is ready.
2. I can see my own network name on my laptop.
3. I click on it, and the message shows connected.
4. Tried to access the internet but it won't work.
So, the main problem now is...
1. There's something wrong with Vista causing any device that wants Internet Sharing to only connect to 'Local'
2. There's something wrong with my IP configuration.
Thank you all very, very much in advance for helping me out.
unless chainfire beats you to it and posts the answer here.. you can PM him
Alright, thank you very much for your suggestion!
I have spent the last week at work more focused on the XDA forum than what I am actually paid to do here at work...
I am so unproductive now, I am actually willing to donate to the forum if the forum can produce results, so that I can finally get back to work in peace!
I have thoroughly read through most relevant posts. I cannot find any specific post that solves the problem I have, so I decided to post anew, against some suggestions...
Anyway, the problem is that,
I cannot get any of my applications that are internet-dependent (skype, mail, weather etc) to access the WIFI connection that "apparently" looks connected, IF WEP (or any other encryption, for that matter) is enabled on the WIFI Router.
OK, what I mean by "apparently" is that the Wifi signal appears at its fullest, the lollipop on top of the screen with arrows is there, and even if I go into start>settings>Connections>wifi, it says that (my particular internet connection, named) Linksys is "connected".
The problem is, with wep encryption (and any other encryptions), it has worked once or twice. I cannot remember if that was before or after the Hard-SPL and radio downgrade (to get it unlocked) but ever since that "beginners luck" connection, I have had no success with connecting these apps to internet through WIFI.
First of all, I cannot figure out why, but I can connect by
1/ GPRS (the only available here in Vietnam - no 3G /HSDPA yet),
2/ with open connection and no encryptions of any kind by the WIFI router, my WIFI and Raphael connects fine. Data transfer happens.
The reality is, it is not very realistic for me to ask all others at work to make their WIFI connection with no security or encryptions..
So, having explained the situation, in a nutshell, problem is that by enabling excryption like WEP, the connection does not allow me to use WIFI on my raphael.
Is this hardware or software on Raphael side? or is it WIFI router side?
Other devices, including my TyTn II connects fine with WEP, which rules out the router, right?
I cannot remember if the problem started before or after OliPro unlock...
If it worked before but not now, there is of course always the possibility of hardware mulfunction, but since it works with no encryption, I am guessing it is hardware?
I have gone to other WIFI networks that are healthy, with other hand held devices happily connected to WIF, but nope...not me...
Any ideas guys?
WRT54G2 Wireless_G Router
DHCP Enabled,
Wireless network mode is set at mixed (both G and B, but by the way, I have tried only G and only B too, with no luck)
Channel set at 1, SSID enabled.
WM 6.1
ROM 3.14.731.04 JPN
Radio 1.10 Olinex
Protocol 52.35.25.21H
AFAIK, Raphael connects to WEP, WPA, WPA2(TKIP/AES)...
did you try deleting all the wifi settings and reconnecting?
or hard reset?
jewelkobayashi said:
I have spent the last week at work more focused on the XDA forum than what I am actually paid to do here at work...
I am so unproductive now, I am actually willing to donate to the forum if the forum can produce results, so that I can finally get back to work in peace!
I have thoroughly read through most relevant posts. I cannot find any specific post that solves the problem I have, so I decided to post anew, against some suggestions...
Anyway, the problem is that,
I cannot get any of my applications that are internet-dependent (skype, mail, weather etc) to access the WIFI connection that "apparently" looks connected, IF WEP (or any other encryption, for that matter) is enabled on the WIFI Router.
OK, what I mean by "apparently" is that the Wifi signal appears at its fullest, the lollipop on top of the screen with arrows is there, and even if I go into start>settings>Connections>wifi, it says that (my particular internet connection, named) Linksys is "connected".
The problem is, with wep encryption (and any other encryptions), it has worked once or twice. I cannot remember if that was before or after the Hard-SPL and radio downgrade (to get it unlocked) but ever since that "beginners luck" connection, I have had no success with connecting these apps to internet through WIFI.
First of all, I cannot figure out why, but I can connect by
1/ GPRS (the only available here in Vietnam - no 3G /HSDPA yet),
2/ with open connection and no encryptions of any kind by the WIFI router, my WIFI and Raphael connects fine. Data transfer happens.
The reality is, it is not very realistic for me to ask all others at work to make their WIFI connection with no security or encryptions..
So, having explained the situation, in a nutshell, problem is that by enabling excryption like WEP, the connection does not allow me to use WIFI on my raphael.
Is this hardware or software on Raphael side? or is it WIFI router side?
Other devices, including my TyTn II connects fine with WEP, which rules out the router, right?
I cannot remember if the problem started before or after OliPro unlock...
If it worked before but not now, there is of course always the possibility of hardware mulfunction, but since it works with no encryption, I am guessing it is hardware?
I have gone to other WIFI networks that are healthy, with other hand held devices happily connected to WIF, but nope...not me...
Any ideas guys?
WRT54G2 Wireless_G Router
DHCP Enabled,
Wireless network mode is set at mixed (both G and B, but by the way, I have tried only G and only B too, with no luck)
Channel set at 1, SSID enabled.
WM 6.1
ROM 3.14.731.04 JPN
Radio 1.10 Olinex
Protocol 52.35.25.21H
Click to expand...
Click to collapse
I completely understand what you are going through & I am going to suggest something for you but the results might vary.
Make sure that Wi-Fi is turned off.
Open your Comm Manager | Settings | Wireless LAN.
When you're in the Wireless LAN Settings panel, select Power Mode.
Slide the selector to Best Performance.
Tap OK & when you're back in the Comm Manager, turn on the Wi-Fi adapter.
Setup your work connection & see if your internet connections work.
One thing to note, while this has resolved my connectivity problems, the settings are not always saved for some unknown reason.
So, be prepared to key in the settings again.
I resorted to everything , not leaving anything to chance, and did many things at once.
It is now fixed, it seems, but at great cost in terms of time, and I cannot be sure which one of these was actually helpful.
But I hard-reset the TP, as well as updating the firmware on both the modem and the WIFI router, and then did hard reset on them too...
I cannot judge on what turned out to be true on other peoples' TP, but for me at least, for both TyTn II and Touch Pro I am currently using, setting connection from "internet" to> "Work" did not help at all....
Thanks anyways...
Hi, Guys.
I'm pulling my hair out trying to stop my WM6.1 blackstone (Touch HD) from attempting to connect to the data connection when I do something network related on the phone. Because It's already connected to wifi.
I'm connected to wifi, and can browse the web, use messenger etc.. But if I attempt something like entering a network path like \\NETDISK\share into the file explorer, it says "Cannot connect etc..." and it's trying to connect via the HSDPA connection, which can't access my local network anyway. It needs to use the wifi...
Is there any way to stop it trying to connect? In the connection settings, I've deleted all modem connections, leaving just the wifi connectivity. If I try to add wifi as a modem, the option is not there...
I'm really lost with this. Please offer any advice you can. I'm close to twisting it in half..
i-CONICA said:
Hi, Guys.
I'm pulling my hair out trying to stop my WM6.1 blackstone (Touch HD) from attempting to connect to the data connection when I do something network related on the phone. Because It's already connected to wifi.
I'm connected to wifi, and can browse the web, use messenger etc.. But if I attempt something like entering a network path like \\NETDISK\share into the file explorer, it says "Cannot connect etc..." and it's trying to connect via the HSDPA connection, which can't access my local network anyway. It needs to use the wifi...
Is there any way to stop it trying to connect? In the connection settings, I've deleted all modem connections, leaving just the wifi connectivity. If I try to add wifi as a modem, the option is not there...
I'm really lost with this. Please offer any advice you can. I'm close to twisting it in half..
Click to expand...
Click to collapse
Hi,
What about putting that networkpath in the adressbar of your browser ?
Dirk
I'm getting so tired of answering this question.......it's very easy
I say you should try and figure it out alone...because that's how I did it!
1- you need a modem Wifi
http://www.topachat.com/comprendre/images/plusieurs-pc-routeur_modem_adsl_wifi.jpg
2- now with a windows vista
demarrer ->panneau de configuration -> centre reseau
3-choose
configurer une connexion un reseau
4- follower Stages in the pictures
http://img53.imageshack.us/img53/6629/79801560.png
http://img187.imageshack.us/img187/2857/31650978.png
http://img440.imageshack.us/img440/7751/78968229.png
http://img240.imageshack.us/img240/1165/90080871.png
http://img122.imageshack.us/img122/1207/22765885.png
http://img161.imageshack.us/img161/9347/57316761.png
5- you need to attach the cable internet to your Pc For the distribution on the Internet
6-
http://img66.imageshack.us/img66/1596/15072009171800.png
http://img150.imageshack.us/img150/2070/81308719.png
7- now you can work with the wifi of you POcket PC
Gooodman, thanks for the reply, while i'm sure many will find this thread useful now, It's of no help to me.
I do have connectivity via WiFi, It's not a normal networking issue, my network is setup perfectly.
The issue is that the Touch HD is always trying to connect via other means even when wifi is available and connected.
For instance, I'll open messenger, or click download on the aGPS data, and the phone attempts to connect to the internet via my phone service provider, when wifi, is connected and ready.
Some apps connect via wifi fine, it seems to be the WM software itself attempting the connection rather than any of my applications.
I don't think it's as straight forward as the first replyer seems to think.
If he'd be so kind as to post this incredibly simple resolution, i'd be very greateful.
I also struggle with this, but this seems to affect it:
a. Start\settings\connections tab
b. Connections
c. Advanced tab
d. Select Networks button
e. Play around with the drop down menu's, especially the lower one.
I cannot be more precise as I do not completely understand myself, but this has helped me in the past.