MS Voice command - MDA II, XDA II, 2060 Windows Mobile 2005 Upgrading

Hi all,
May i say first of all what an amazing job with WM5 on the XDAII. Love it! all works as expected. Thing is i can't get MS Voice command to install. I install 1.0 and i can a warning that i need to install it in main memory. So i select device. I then upgrade to 1.5 which requires you to unistall 1.0 from your PPC. I select MS voice command from the add remove programs but i get an error and the app won't completely uninstall. There fore i can't install 1.5 AAAAAHHHH. I love WM5 but i use MS Voice all the time. Anyone any thoughts ?????

Any ideas?
Anyone got this running??
Love to know how ???
please ?????

check your windows folder to see if you have a VoiceCommand.unload (not sure of exact filename) file, and try moving it to a backup folder.
Check your registry for old voice command installation entries and backup and remove them.
Then install 1.5
V

it's on the list so somebody are bound to know how
http://forum.xda-developers.com/viewtopic.php?t=20727&highlight=voice+commander+2005
on the top of my head i would say
change the .exe to zip and copy out the cab file and transfer it to your device and run it from there from the 1.5 versions mind you

Thanks guys, having had a good look around the forum it would appear that you cannot install 1.5 becuase you can't fully uninstall 1.0.

Have you tried removing registry entries and the .unload file?
If windows doesn't know that VC is already installed, it shouldn't complain.
V

This was also my problem 2 months ago. What I did was to install MSVC 1.0 then I upgraded to 1.5. This 1.5 was installed to XDA 2 2003 SE. Then I upgraded my active sync. to 4.1 and upgraded my Device OS to WM5.0 v 1.60C. After a successful upgrade I place my XDA 2 in the craddle and using the pop up window of Active sync 4.1 I pressed Tools > Add Remove Program check the box under VC 1.5 then check device for installation, installed in device and there I get the VC 1.5.
In my case there is no need to down grade since I have two xda units.
Griffy wiffy, in your case you must downgrade or you can't get away with the error.
Another way is to check and remove all VC 1.0 in both Desk top and device by using this:
Device : START > SETTINGS > ADD/REMOVE PROGRAMS
Desktop: START > CONTROL PANEL > ADD/REMOVE PROGRAMS
Make sure you already upgraded your VC 1.5 in the desktop before removing VC 1.0
Good Luck

VC 1.5 can be installed on WM 5.0 1.60c & LOUD incoming
After several tries, I also managed to successfully install VC. I can't remember the exact steps, but basically you have to first install VC 1.0 on both the PC and the PPC, then remove the VC 1.0 from the PPC, and upgrade to VC 1.5.
Maybe this will help: after installing VC 1.0, kill the activesync connection (uncradle/unplug the device). Then uninstall 1.0. Cradle the device again, and upgrade to 1.5.
I discovered that the announcing call was very quiet. So I turned it off because it was muting my ringing tone as well, and I'd end up missing calls.
Then I discovered how to increase the volume!!
Edit the following registry:
HKCU\ControlPanel\SoundCategories\VoiceCommand1\
change AttenuationCategory from 3 to 1
Good Luck! 8)

I have been able to install VC with no problem at all but I have found that for me is actually slows the whole system down. I have tried it from several fresh installs and it is consistant across the board.

Not had chance to look at this for a while but i am still not able to install MS Voice command on WM2005. Please if anyone out there has a clear way of doing this please please let me know !!!
THANKS

Hello THere
Just use the the .CAB file of Microsoft Voice 1.5 and run it from the PPC i am using MV 1.5 on WM5 with no problem .
best regards

The problem is i can't get msvoice command 1.0 to uninstall. 1.5 says it won't install until its gone. I have deleted all the file and gone through the registry as much as i can. Please does anyone know what i have to remove from the registry to get rid of 1.0.???????????

Please does anyone know how to manually uninstall MSVoice command 1.10 from WM2005. registry keys, files etc...

Try to re-install the 1.0 again and uninstall it again.

Re: VC 1.5 can be installed on WM 5.0 1.60c & LOUD incom
Putra said:
After several tries, I also managed to successfully install VC. I can't remember the exact steps, but basically you have to first install VC 1.0 on both the PC and the PPC, then remove the VC 1.0 from the PPC, and upgrade to VC 1.5.
Maybe this will help: after installing VC 1.0, kill the activesync connection (uncradle/unplug the device). Then uninstall 1.0. Cradle the device again, and upgrade to 1.5.
I discovered that the announcing call was very quiet. So I turned it off because it was muting my ringing tone as well, and I'd end up missing calls.
Then I discovered how to increase the volume!!
Edit the following registry:
HKCU\ControlPanel\SoundCategories\VoiceCommand1\
change AttenuationCategory from 3 to 1
Good Luck! 8)
Click to expand...
Click to collapse
_______________________________
I am probably bleary eyed after reading to many posts today, but I am unable to find your registry : HKCU ? Where is it hiding? I have a reg. editor, but cannot fine the location you mentioned as I want to increase my volume.
Thanks

HKCU
HKCU = HKEY_CURRENT_USER

Related

Cannot sync my hima after uprading to WM 2005

I just upgrade with the last AKU3.50 with HimaUpgradeUt_noID.exe and now i cannont synch but i can install aps...
By the way i use DOC tools to upgrade the storage to 30 Mb
If anyone have an idea, let me know
Thx
Whats your activesync version?
I'm on 4.5 beta
an di got the error => Support code 80070057
I try :
- changing my ROM => nothing
- changing my Radio => nothing
So actually i'm under AKU 3.50a.32 WWE with Radio 1.19 and 30 Mb of storage (using DOC tool).
Could I have done something wih the Disc On Chip ?
NB : I use Office 2007, it work before with my old 2003 ROM.
After, I upgrade so i force with HimaUpgradeUt_noID.exe and the progs wont install temselves...
So i change the ROM again, the Radio...progs install works but the synch can't be achieved
Don't hesitate to curse me for 3 generations
I think the problem isnt on your device buth rather on you computer..
Why dont you try to make another user on your computer then try to sync it there..
Lets see what will happen
back in 5 minutes with the answer...
It isn't my PC, it's my device...
So is there a hard hard reset ? or do i try to be back to an old 2003SE or anyone could me what I do wrong with my Hima .
do you have an application that actually closes programs? if yes, try to set activesync.exe as an exception.
I got a task manager but i dont see what you want to do
Trying to tell my firewall or toher that active sync is good for me ?
=> It's the case because it was working fine before
Trying to close the prog on my device ?
=> Haven't a activsync.exe just en repllog.exe with the activ sync icone.
Well well well, i'm so fu**** confused
Back to old 2003SE and it works... Geez !
tried looking up the error code?
http://www.google.dk/search?hl=da&q...7&btnG=Google-søgning&meta=lr=lang_da|lang_en
I have the very same problem, since i've cook a new rom aku 3.2 w/ 24Mb of pagepool. I've noticed that i can't delete or modify any file in the root folder, but using resco explorer. So i guess that my root folder for a reason i don't know, is write protected. My hima didn't sync with outlook, using any versior of ActiveSync at home and work (before the new rom, it works pretty fine), but it gets connected so i can use internet... So any of you guys can tell me how to solve my problem?
It would be very appreciated
I have the same problem,so i did backup my Data directly on the Himalaya Device und copied it over the WM5 Storage tool,its a small run in a Circle but
its functional ,You can Install Apps too,because you can choose now (thanks to WM2k5)where the
Apps are going to copied..
I do the same thing, but i really need to sync with mi outlook at home and work, so that back up don't solve the problem.
The problem is 100% in your PC. I discovered this when I notice that my laptop sync ok but want sync with my desktop. I done everything under the sun to make sure my disktop mirro image of the lapttop but nothing works.
Then at last I discovered that it works when I UNchecked the settings on the device (USB to PC) to disable the advance network functionality.
I suggest you delet active sync first and re-install it then reboot..
Good luck.
forget to mention both laptop and desktop XP, and device is XDA2 with AKU3.5
I think better use the fix version 4.2 not beta 4.5. It could be there is some bugs in the software.
Is this just an email sync issue, rather than just comms?
Do you use Exchange server?
Try this:
On the Exchange server, launch Internet Services Manager. Right click on the Microsoft-Server-ActiveSync virtual directory and choose Properties. Select the Directory Security tab. Click the Edit button in the Secure Communications section and select the option to “Ignore client certificates.”

faria-htc wizard...WWE WM6 ROM- [the real thing]

faria is back!
ftp://xda:[email protected]/Uploads/WIZARD/ROMS/untitled.JPG screenshots....
version [os] 5.2.318
Build aku 15341 aku.4.0.0.01 WWE
Ipl version ----
Spl version -----
Radio version recommended 2.19
Extended ROM version Faria v5
Htc logo Faria
Splash screen Faria
Page-pool- 6mb [original 12] 30mb free ram.
YOU MUST HAVE A BOOTLOADE VERSION 2XXX OR ABOVE...
ROM changes
Active sync fixed
Sofkey lag fixed
Voice command fixed
Windows live fixed
Added to the ROM;
Extended_rom added and fully working
Poket RAR
Windows live mail set to download double of the current size email.
Windows live/voice command –by default
BT SIM ACCESS PROFILE.
Camera 3.3 fully working
Media files support added plus new gif engine
New com manager -With option to turn IR on/of!!!
All wireless’ security profiles support added
HTC X [press and old to close activated]
Flash player 7
M&Msarc-soft 3.5.1.22.c
Java v11.1.7.1023
New Sim services app [stk]
Phone pad T9 [English ant Portuguese only] others dlls languages can be supplied upon request.
Sim card manager v 5.22
Replaced BT stereo profile with 3.3
Windows live search uk and US
Office mobile new layout
Registry mods;
4 ways navigation added
File explorer set to view all files
AD2P set to stereo
AD2P bit pool set to 60
Different gprs icon
Bypassed welcome screen [no more copy and paste]
Wireless today plug in and redirect app
Mms folder activated
Disabled Microsoft feedback
Time zones change page activated
Disabled ussd service
Disabled error reporting
Faria Clear type font
Cab set to not delete after install
Gprs bubble timer and disconnect button
Internet explorer Java support
Gprs workaround fix
Time zone page on and checked
GPS icon on
Clear type on, landscape and internet explorer
Obex on
GPS com port fix
One line time in today [not lvm]
Internet cache moved to storage card
Time in all pages
Wireless 54g support added
Wireless preload status on upon boot.
Removed from the ROM​
VOIP removed
DRM removed
SECURITY removed
Windows update removed
Scq removed
Windows catalogue removed
Bluetooth hdi removed [BT mouse/keyboard support]
Third party apps
BT sim card access profile
Adobe le reader
Startup manager
Battery status
Today agenda
Dotfred Contacts manager plug in
Dotfred Contact backup
File AS contact plug in
Total commander
Dotfred task-manager+registry editor
Phm tray icon
Sms backup
Omap clock
Smartkey [in program files]
Ringtone plug-in
New menu plug in [control panel]
Mobile secretary [control panel]
Windows live search
.ini files associated to notepad [now u can edit your Smartkey .ini in the pocket pc]
My documents plug in programs
My docs retriever plug in [in my documents]
Favorite’s shortcut [in my documents]
Time sync in control paned
Registry wizard in control paned
Extra Tray icons—the tray icons are managed by battery-status, got to options to enable/disable or add and remove them.
Bluetooth manager
Memory manager
Device lock
Reset app.
From the extended rom
Extras folder [my documents]
Dictionary manager, wififofum, spb to play, ppc vault, call recorder, smart key enable, and live search US
This cabs can be run from the folder called “extras” from my documents. Please note if you have a g4 that is unable to write to the extended rom this app will not be available
Xnview running from the extended rom
Know issues and recommendations;
No performance tweaks needed in my opinion
I recommend over clocking the rom [battery-status] to 247 MHz instead of applying performance tweaks ,performance tweaks take away ram…….were over clocking comes at very little loss of battery especially if you use the auto scale function.
THIS rom has no parts from any current wm6 rom,this is a real WWE wizard rom ,all the parts needed to make it as a full rom were sourced from my 3.3.
Battery status cannot be configured from today options control panel…….but you can configure it by pressing and holding the battery icon in battery-status today plug in.
the rom may be bit slower because i did not applied any performance tweaks....plus the rom is fully loaded so we cant compare to other roms.....i mean this roms has everything working.....its like comparing a loaded truck to an empty one..
the device may crash when it reboots for the first time at the welcome screen if you don't tap it straight away....just reset the device with the stylus and it will be fine. this is because there is apps loading in the background.
a vanilha version will be released soon.
many thanks to mamaich BEPE AND dr.P FOR ALL THE Support and all the authors/xda of the freware apps.... a specialy.....my wife that lend her wizard to me in order to finish this rom,and for putting up with the many hours i ignored her.....
download from here;http://dl.dropbox.com/u/7696581/htc%20wizard/Roms/CB-AIRAF-CB-AIRAF-the%20real%20thing.rar
and here are some fixes for the rom and request.
caps lock fix
extended-rom files for those who need it
windows live fix
speed dialer from 3.3 FILE MISSING, TRYING TO FIND A COPY.
16 languages for the phone pad [chose your and copy to windows]
Thanks!
Had put yesterday MBE... Gotta try this one now!
BTW,
THIS rom has no parts from any current wm6 rom,this is a real WWE wizard rom ,all the parts needed to make it as a full rom were sourced from my 3.3.
Click to expand...
Click to collapse
You mean it doesn't share modifications that were present in other WM6 roms, that yours comes from a clean WM6 and you added your own stuff?
Or that it's not a WM6 core...?
Got a bit lost reading, sorry.
Ka.
Downloading now...... Screw my own release.....
LOL faria and Molski are gods in my book.
new rom with many fix yeah
Tnx Faria..Going to download it... ;-)
Faria,
can i upgrade to this rom using my Vista Ultimate?
Previously i could not upgrade to to WM6 with Vista. had to use my XP to do it.
Thanks
P.S. Is this coocked final version WM6?
Can someone upload to different location. I cant seem to download it from rapishare. Thanks
Oh Yeah,
Great Faria i downing it right now
If its even better then your 3.3 with 8mb pagepool well then it is terrific
with the greatest respect.
thankx
kast said:
Thanks!
Had put yesterday MBE... Gotta try this one now!
BTW,
You mean it doesn't share modifications that were present in other WM6 roms, that yours comes from a clean WM6 and you added your own stuff?
Or that it's not a WM6 core...?
Got a bit lost reading, sorry.
Ka.
Click to expand...
Click to collapse
yes this rom has nothing to do with any prereleased wizard rom,or parts.
kyakubov said:
Faria,
can i upgrade to this rom using my Vista Ultimate?
Previously i could not upgrade to to WM6 with Vista. had to use my XP to do it.
Thanks
P.S. Is this coocked final version WM6?
Click to expand...
Click to collapse
no....we been unable to crack the vista update utiility so far.....
kyakubov said:
can i upgrade to this rom using my Vista Ultimate?
Click to expand...
Click to collapse
The ROM image doesn't really care whether you're using Windows XP or Windows Vista. Without knowing the details, I'm guessing that the problems you're having have to do with the new security "features" of Windows Vista.
What you'll need to do is once you've downloaded the ROM image to a location on your local hard drive, right-click on the file and select "Run as Administrator". You will be prompted to "Allow" or "Cancel", select "Allow" and you should be OK from that point forward.
Dwimmerlaik said:
The ROM image doesn't really care whether you're using Windows XP or Windows Vista. Without knowing the details, I'm guessing that the problems you're having have to do with the new security "features" of Windows Vista.
What you'll need to do is once you've downloaded the ROM image to a location on your local hard drive, right-click on the file and select "Run as Administrator". You will be prompted to "Allow" or "Cancel", select "Allow" and you should be OK from that point forward.
Click to expand...
Click to collapse
Not really, the problem I had was , it started to upgrade and when the phone restarted and the rainbow appeared the connection was lost between PC and phone.
I hope I was able to explain it correctly.
Thanks Faria for your reply.
Am I allowed a joke?
It could be a bit scary to see a new rom published and read the following in your signature:
HTC WIZARD ON REPAIR
Click to expand...
Click to collapse
No offense meant, just joking, we all know quality of your roms.
Ka.
kyakubov said:
Not really, the problem I had was , it started to upgrade and when the phone restarted and the rainbow appeared the connection was lost between PC and phone.
I hope I was able to explain it correctly.
Click to expand...
Click to collapse
The issue you are havings is a known issue. The flash utility looks for ActiveSync, and since Vista does not use ActiveSync but its own mess, you wont be able to flash with Vista.
Can anyone provide a mirror link?
Ok before Faria gets slammed with posts about the flash freezing at 99%.... this is normal. All ROM's (Even releases by HTC or your carrier) have a point when it looks frozen but its not.
Also one thing I have seen is that people expect these things to be perfect OOB (out of box), this is never the case. There will always be a few little kinks and if you read the forum you will either find the answer in this post or another. So read before you post.
On another note, faria I love this release. So far no issues seen, but i will run the phone hardcore as i usually do to see if there are any issues. Thanks again for all your hardwork in putting this release out.
Some people who where trying to update to WM6 on Smartphones like Dash had a problem with "Invalid Code ID"... (me as well).
The procedure to solve the prob was to use the "Unlocker" program provided by some companies, disconnect cable when it asked for a file, close the program and continue to flash with "modded files" (the modded files were specific to the "vendor ID" prob).
Whe you run the unlocker, ActiveSync disconnects, at least looks so.
In this case my "noobish" mind could think the unlocker is actually handling by itself the connection... In this case, using this procedure, it should be possible to run the upgrade even from Vista.
On the other hand, the unlocker might just disconnect ActiveSync but still be using MS drivers, which are probably different in Vista.
Maybe I'm not used to think and I'm just saying nonsense.
Ka.
Zer0 said:
Can anyone provide a mirror link?
Click to expand...
Click to collapse
Appreciate it if someone would provide a mirror link. Thanks
Crossbow WWE
AHHHHHHH!!!.. My prayers have been answered.
Thank You
Faria.
Question why remove the pdf reader. I like the Adobe ( i get alot of attachments daily)
daddy_yankee1980 said:
Appreciate it if someone would provide a mirror link. Thanks
Click to expand...
Click to collapse
Rapid works just fine...
--M

WM6 Windows Update - files & settings required?

Now I know Windows Update on WM6 doesn't work for the Wizard - It connects to the m$ update site but doesn't find any updates. I tested this previously with the MB ROM and used a sniffer to see what was going on and it does indeed connect to the windows update site using HTTP.
In Faria's WM6 ROM he has removed Windows Update by physically removing some files from the ROM and deleting some registry settings as well as commenting out a line in the 'initflashfiles.dat' file. I have attempted to re-add Windows Update to his ROM with some sucess, however I am not quite there yet....
I have restored 'autoupdate.exe' and 'AutoUpdateRes_wpc.exe.0409.mui' as well as a registry setting [HKLM\System\Autoupdate] and it's settings and uncommented the line in the 'initflashfiles.dat' file to add the shortcut back. Now Windows Update is available and when I open it it opens OK but fails to connect when I select update now. It then sort of hangs and can only be closed using Task Manager or similar.
Are there any other files or settings that need restoring to get this back. I understand it doesn't work but my curiosity is getting the better of me
Thanks
Andy
I thought I read (maybe here) that when someone did the update, they actually had a theme file that was available and it downloaded that.
No packets sent?
I have been playing around with the Windows Update application and it starts fine. If I select 'Check Now' it immediately comes back with the Error screen telling me 'connection to update server was not available....'. If I click OK and then attempt to end the application it just stays on the screen and the only way to stop it is to use Task Manager and terminate the process
I have also put a sniffer on the port my Wireless AP connects to and cannot see the Wizard transmit anything when I click select 'Update Now' (I have verified I can access the internet with IE and I can see this OK with the sniffer).
Does anyone know what I am missing to at least get the Autoupdate.exe application to attempt to connect as it did with the MB ROM?
Thanks
Andy
Anyone
Can I bump this up as I want to get this working and re-added to my ROM (I know it doesn't actually work but I would like the functionality restored anyway).
I have restored the files:
autoupdate.lnk
autoupdate.exe
AutoUpdateRes_wpc.exe.0409.mui
Added the registry settings:
[HKEY_LOCAL_MACHINE\System\Autoupdate]
"DetectionCookie"="0"
"IntervalEndTime"=dword:f0
"IntervalStartTime"=dword:3c
"OmaDmSessionTimeout"=dword:258
"NextRunNormalInterval"=dword:93a80
"Automatic"=dword:0
"OTA"=dword:0
And restored the line to the initflashfiles.dat:
Directory("\Windows\Start Menu\Programs"):-File("Windows Update.lnk","\Windows\autoupdate.lnk")
There must be something else I am missing as it never attempts to connect and hangs when trying to exit the application. I restored the files from the MB ROM to Faria's ROM as he didn't include the originals.
Thanks
Andy
I would very cautious about re-adding windows update to a beta evaluation ROM (all our WM6 roms are!!!!).
It will do no good, only harm, I think, since Windows Update as well as a few other components in these beta WM6 are actually there only to call home and manage the beta evaluation.
My position of this is that you want to remove as much as possible all these pieces of software, essentially to avoid the call-home feature and the ROM expiration process, without breaking the ROM, of course.
So, I recomment to leave Windows Update out, SQM and other modules, ceipui, the remote provisioning mechanisms, etc. I've already talked about this in diffent threads, but I'll try to post a summary of my findings in the short future.
Regards,
--eluth.
I understand and accept the implications but I would prefer it if this was restored to my ROM.
I am just after some help as to what I am missing to restore this functionality
I have listed what files and settings I have restored but AutoUpdate is obviously missing something based on it's behaviour.
Anyone?
Anyone?
Anyone know what I am missing? Surely some of the cookers on here who have removed the Windows Update from their ROMs know what they removed?
That's all I am after; not too big a task I assume?
Andy
ADB100,
I could not tell you what is missing, but I do know that it is enabled in mUn's ROM. Because I did the same as you. Hooked it up to a sniffer and looked at the packet exchange between my Wizard and the MS update site..
Regards
Projectile said:
ADB100,
I could not tell you what is missing, but I do know that it is enabled in mUn's ROM. Because I did the same as you. Hooked it up to a sniffer and looked at the packet exchange between my Wizard and the MS update site..
Regards
Click to expand...
Click to collapse
It's enabled in the original Orwells, the MB Edition, mUn's and Faria's Vanilla WM6.
However I still can't find what I am missing to get it back in my re-heat of Faria's latest 'Real Thing'.....
Andy
you are missing SQM .
ps;
there is WM6 ROM for a windows ppc that has time bomb....plus microsoft can expire your rom by update if they want.... the update feature uses .pkg and this settings will stay after hard reset.... so they can use it for any means,and so can anyone that can compile 1 of those packages. just to let you know.
faria said:
you are missing SQM .
ps;
there is WM6 ROM for a windows ppc that has time bomb....plus microsoft can expire your rom by update if they want.... the update feature uses .pkg and this settings will stay after hard reset.... so they can use it for any means,and so can anyone that can compile 1 of those packages. just to let you know.
Click to expand...
Click to collapse
All the SQM files are present and the SQM settings in the registry are identical
What else could be missing?
Also, Which rom as the timebomb and how do we find it?
hi, anibody have this files:
autoupdate.exe' and 'AutoUpdateRes_wpc.exe.0409.mui'?
Thanks
I don't have it handy, but go find the original Ingenetics dump that was posted here (do a search) and I know it has those files in it.
Andy,
The original dump by Ingenetics was pulled a few days after he posted it. But I think this link has it. Good luck on your quest.
http://rapidshare.com/users/T4RZX2

where to find WM6.0 with no extras?

Help me out guys. Tell me if it's a good idea to install a fresh WM6.0 ROM into my JASJAR with no extras at all and then install only the software i want?
If so, please tell me where to download an uncooked/unmodded version of WM6!!
Thx!
http://forum.xda-developers.com/showthread.php?t=341510
Thx bro ... i'll get back to you as soon as the ROM is downloaded!
also, look around, and keep a watch for "Vanilla" ROMs, these are the ones that only have the system core, and some essential software, without which the system would be pretty crippled.
Beasty is going to release a new Vanilla edition of the Beasty&Leo Amalgam ROM, so far the best one
I've tried almost all of ROMs available here - "Mo3ulla CE OS: 5.2.1933 Build: 18533.0.7.0 [v1] extreme fast vanilla" is THE BEST (for my UNI with all soft I use). Thank you Mo3ulla.
There is one small problem with Cyberon Voice Speed Dial - after I push the button activating the program it does not wait for voice tag but starts dialing itself any number from Contacts list.
Anyway not using voice speed dialing - I haven't found better ROM for me
Two Thumz Up!!
I've updated my JASJAR with your Windows Mobile 6.0 (CE OS 5.2.1933 Build 18533.0.7.0 ROM 2.11.09 G4M EROM Unknown RADIO 1.18.00), installed the Broadcomm Bluetooth Stack and updated the WiFi service.
Everything is as beautiful and fast as can be expected. Really a great great ROM.
I do have some minor problems though, i think you can help:
1) I need to change the hard keyboard from Russian to English and don't know how to edit the registry on my JASJAR. Could you help me out with this?
2) I need to change the bootscreen ... WoW really isn't my thing I tried editing the welcomehead.192.png file but it isn't letting me update it. Any recommendations?
3) I need to remove the Alt-Tab application and Solitaire. How do i go about doing that?
4) After installing BroadComm BT Stack and WiFi service, i've got only 29 MB storage memory and 21 MB program memory left. Is that how it's supposed to be?
Out of curiosity (and no offense, really!! the ROM is the best i've seen so far), are you planning to update this ROM with all the above mentioned stuff fixed?
Thanks again for everything!
1.later will be CAB who will returning registry to original WWE state.install RESCO EXPLORER and RESCO REGISTRY PLUGIN to edit this settings manually
2.download this http://rapidshare.com/files/69538019/welcomehead.rar.html ..copy it via active sync
3 Alt-Tab and Solitaire.is very little apps.. ..I see no point in their Disposal..
just simply remove links to it in your start menu
\windows\startmenu\programs
4// its normal ..rom cleaning does not affect on storage memory size.. but its seriously increasing speed
ps.... about voice commander ... install version 2.0 it runs on it without any problem
Great stuff, man!
1) Sorry for the noob question. I downloaded CERegEdit later that day and fixed the hard keyboard. The CAB will still be greatly awaited!
2) The rar extraction idea was great and worked perfectly!
3) Again, sorry for the noobness asking to delete these apps. Removing them from Windows->StartMenu->Programs works perfectly fine as well!
Thanks again!
My program memory keeps fluctuating between 18mb and 6mb. Why is this happening? Anything to do with how much stuff is in the RAM?!? :S

Cyberon Voice Commander for HTC Tornado

This is a must have for all HTC Tornado phones. With this software, you can perform various functions by talking to the phone. For example, you can activate the program and say dial Home, and it will call your house. With Digit dial, you just have to utter the numbers and the program will call the number.
This software is bundled with all Dopod 577w phones - WM5 version.
However, when we install our phones with cooked ROMS which have a different ID, this software won't work anymore because it is only bundled with phones with 'dopod577w' ID. However, legally we have the license to this product already.
Hence, with the help of SGregory, here I present you the patched Cyberon Voice Commander which will only work for HTC Tornado.
Here is how to install the software.
1) Install the original Cyberon Voice Commander
http://rapidshare.com/files/247751443/CVC-SP-AME-Dopod-51215-BT.CAB
2) Extract all files in this cab and overwrite the files in your phone
http://rapidshare.com/files/247759639/CVC-SP-AME-Dopod-51215-BT.zip
After installing, just reboot the device. You can access the program by holding the left soft key.
Note - I tried to package everything into a single CAB using Win CE Cab manager but it did not work, I get an error message saying that the cab file is not digitally signed. Can anyone tell me what went wrong?
Enjoy
FAILED
it doesnt work on my dopod577w w/ wm6.1 neoshadow. i followed the instructions and replaced the files...still it dsnt wrk
Sorry I forgot to mention, this CAB will only work for SGregory WM6.5 ROM or any other device with the ID of TORN100
Try to use MobileRegistryEditor to edit your phone registry, did you see the ID of TORN100 there?
We can't make this CAB accessible to all smartphones as it will be tantamount to cracking. Currently we are just patching this CAB so that it works for Dopod 577w users who already have the license to this product.
Also, this software can only be installed to main memory currently which consumes precious storage space. I have tried moving the entire folder to storage card, the software still works. But it can no longer be accessible via the long hold of left soft key.
Someone needs to look into the CAB to fix this. Meanwhile, one can consider using AE Button Plus to configure just that.
I packed all files in cab. Now install cab in device, and use it
Please, test
Can it be installed into storage card?
Will try it later
will this now work for wm6.1 or is this still for SGregory WM6.5 ROM only?
On any device with the device id of TORN100

Categories

Resources