I have an AmbiCom WIFI SDcard which comes wtih drivers which makes connections with the AP, but don't have any thing to do with internet connection, I have IMATE MDAII with WM2003 2.06 ROM, when I put the card in place nothing happens, and it seems this ROM doesnt support WIFI and the Microsoft zero configuration wizard doesnt show up, what to do to make network connections configure to WIFI
You should install this driver then install Ambicom driver. Good luck!
help me with my Spectec wifi card please!
hey... i need your help .. i just bought a spectec wifi card but it doesn't seem to be working... i have an XDA II
i installed the driver for the card and then when i inserted the card, it does not seem to detect and connect.. when i clicked on the icon for the WLAN under programs, it did not even run at all...
my ROM version is 1.72.00WWE
Radio version of 1.17.00
Ext Rom version of 1.72.901
i am running on WM 2003
I have the problem with my SOCKET SD wifi card :
I installed the drivers and it simply doesn't work
Help!
Related
Hi there..
I have a Problem, with the WM6 roms.. I tried TNT and XDA, but they don't detect my miniSD Card.
This always worked with the Original Orange Switzerland ROM..
What could cause this problem and how can I resolve it?
what process did you use to upgrade your wizard to wm6?
I followed the following instructions:
http://forum.xda-developers.com/showthread.php?t=285435
First I installed the T-Mobile 2.26 and upgraded to 3.08..
did you remove your card before flashing?
ytsejam_ said:
did you remove your card before flashing?
Click to expand...
Click to collapse
Not 100% sure, but I think so ;-)
hhmm.. because i know, there are issues regarding upgrades killing the memory card..
did you apply the paradis change pagepool via activesync?
Well I tried two different storage cards, so it can't be the card itself..
What is a paradis change pagepool?
it's a program to change your pagepool (memory cache allocation).. don't mind.
you mean 2 different cards don't work? hhmm.. now i'm baffled.. have you tried performing a hard reset yet?
hmm, no.. But I tried now.. No difference..
I will try to reinstall my operators ROM..
Are you using File Explorer / My Device and not finding the card?
If so, touch My Device for the drop down menu, then click on the card as it should show there. Once you actually go to it, it should show in the My Device screen like all the other folders.
I've had this happen to me a few times with some of the newer Mobile 6 roms and this has always worked for me.
Good luck.
My Qtek 9100 won´t detect my storege card after upgrading to WM6 (release 3). What do you mean by "drop down menu"? I´m completely new with WM6...
just try inserting it a few times. i have had to do that with my both my devices with wm5 and wm6.
Well, it detects my storage card again:
I reinstalled the official Orange Switzerland Rom and did the whole downgrading and unlocking procedure again.. But it was worth it )
@ LongKong
did you search for your problem?
you may have found this:
http://forum.xda-developers.com/showpost.php?p=1432665&postcount=15
I have the same issue ... I made a compatibility test with the ROMs - with some I don't have any problem with others it had.
Any ROMs after TNT5 I tested did not work out so I sticked to TNT5 so far.
You may have a try and can confirm. I did not test the most recent ROMs as I currently use another device most of the time.
Cheers!
Storage card problem
Hello i have the same problem with my wizzard. 2Gb Lexar micro SD doesn't work, but it had worked before. When i insert it in other smartphone WORKS.
I also have other 256Mb card that works in my wizzard!!
Any explanation?
rom version 6.1.0.0
rom date 1/26/08
radio version 01.12.10
protocol version 4.0.13.23
it may be hardware-related, not software. after i took out the memory card when i inserted it back it wasn't showing in file explorer but after a while i found that i have to insert it, hold it for a few seconds in and then release it. I thought about a rom issue but it wasn't that after all.
hope is usefull for you guys also
blazex said:
it may be hardware-related, not software. after i took out the memory card when i inserted it back it wasn't showing in file explorer but after a while i found that i have to insert it, hold it for a few seconds in and then release it. I thought about a rom issue but it wasn't that after all.
hope is usefull for you guys also
Click to expand...
Click to collapse
Just insert it a few times. It is a hardware issue with the memory card slot. I had this problem ALL the time.
help..my prophet cannot detect sd card n wifi cannot detect
after i upgrade roms green edition wm6.1..
Same problem here but the wi-fi one.My s200 doesn't recognize the sd card some time after the rom upgrade.however, I have no issues with wireless.
Hi all
Sorry for my poor English
I have tried three to four WM6.1 Rom on my HTC TYTNII, whenever an application try to read the storage card, it hangs, but any other application installed on device working fine,
also tried to exchange the SD card with my friends TYTNII,
both my and his card working on his device
both my and his card hangs on my device
however, if I flash a WM6.0 Rom, this issue doesn't exist, did anyone meet this or only me ???
BTW,
the card is a SanDisk 8G
3.29.707.0 WWE
05/07/08
1.65.16.25
25.83.40.02H
KAIS130
SPL-3.28.Hard
CPLD-8
Hope we may have a solution on the above, Thanks for any reply.
the apps that are freezing, are they installed on device and reading files on storage card orr installed to storage card and the shortcut is on device? if the apps are installed to the storage card they will sometimes run slow, try uninstalling them and reinstalling to the device. also you might check your running programs in the task manager. running programs will obviously eat RAM and thus the device will run slower
i thing it is not cause by reinstallation
even i use the built in file explorer to read the SD card, it also hang...
rookery said:
i thing it is not cause by reinstallation
even i use the built in file explorer to read the SD card, it also hang...
Click to expand...
Click to collapse
had the same problem after flashing the original german wm6.1 rom. everytime i tried to read the sd card totalcomander/file explorer crashed, couldn´t play music from the sd, but the files were readable via cardreader
i formatted the sd card, hard resetted a few times with/without card: noting, the problem was still here.
so i flashed another rom and voila: NO FREEZING! don´t know what happend, but everything is good now.
my first flash of the offical wm6.1 rom was a "bad" one, i think the download was a little bit corrupted, the start menu wasn´t like it should be, there were parts from the old wm6 left i think. so i think you should DOWNLOAD the rom again and then try to flash again.
steph
variosteph said:
had the same problem after flashing the original german wm6.1 rom. everytime i tried to read the sd card totalcomander/file explorer crashed, couldn´t play music from the sd, but the files were readable via cardreader
i formatted the sd card, hard resetted a few times with/without card: noting, the problem was still here.
so i flashed another rom and voila: NO FREEZING! don´t know what happend, but everything is good now.
my first flash of the offical wm6.1 rom was a "bad" one, i think the download was a little bit corrupted, the start menu wasn´t like it should be, there were parts from the old wm6 left i think. so i think you should DOWNLOAD the rom again and then try to flash again.
steph
Click to expand...
Click to collapse
Thanks for your information, but I had flashed "Dutty's", "TNT Series" and HTC official, same problem happened a few days after the flash, i assume it may not cause by download problem....
are there any way to verify a flash result ????
Just Flashed
HTC TyTN II English ROM Code Update (10/15/08)
ROM version: 3.34.721.2 WWE
ROM date: 10/03/08
Radio Version : 25.83.40.02H_1.70.19.09
SD hand prolem still, may anyone help me
rookery said:
Just Flashed
HTC TyTN II English ROM Code Update (10/15/08)
ROM version: 3.34.721.2 WWE
ROM date: 10/03/08
Radio Version : 25.83.40.02H_1.70.19.09
SD hand prolem still, may anyone help me
Click to expand...
Click to collapse
1. Try removing the SD card and SIM while flashing the new ROM.
2. Try formatting the SD card in FAT32 again.
Clean your card slot in the phone its dirty thats all .
Tried removing the SD card and SIM while flashing the new ROM
Tried formatting the SD card in FAT32 again.
problem still reamin,
however, once reflash back to Windows Mobile 6.0, SD card works reflash 6.1 SD hang.....any idea?
I've seen a similar symptom to this if I try to change my Internet cache to write to the storage card.
Both the OEM AT&T Tilt 6.1 firmware and a couple of the flashes from here - same thing.
Now here's the cute part - I also have a 2GB NON-SDHC card and so far, with THAT card, it hasn't happened.
This looks like some kind of registry problem in these ROMs, and it also appears to be in the base code and across a number of different loads.
It scrambled the hell out of the formatting on my 4GB card when it happened the first time. The second time I SAW a scrambled directory in Total Commander, but a checkdisk on my PC (it has a reader that can read the SDHC cards native) came back clean.
There's something funny going on with these loads somewhere.
Never mind - it just blew up the same way on the non-HC card. Same deal.
And working in SAMSUNG SGH-i600 WM6 with card Sandisk MicroSD HC 8GB http://forum.xda-developers.com/showthread.php?t=388364
Mis pequeñines
Tell us more!!
Hoe exactly did you apply this driver and wich driver did you use?
The HTC or this for Fujitsu Siemens?
Isn't thoose the same things?
IS there any issues like wifi not working or Active Synk synchronization problems?
Yes, the driver fujitsu siemens works in Samsung SGH-I600 WM6 and it does not have problems of wifi and active sync, working all
http://forum.xda-developers.com/attachment.php?attachmentid=83392&d=1209243092
THANKS GreateVK and FreePK
Final questions:
Does it needs a hard reset of the device when applying?
Can you removed it afterwards if something gets wrong?
Thankkkks
Not hard reset only it requests to reinitiate device, after installing to driver, and it is possible removed in removing programs.
Sorry by my English
Cool looking forward to test it!
When applied this driver works with non SDHC card too right?
Now I'm having 2GB Sandisk micro sd card, if I apply this SDHC driver, this card (2GB non SDHC) will work with no complications, isn't so?
I make a test now with one microsd 256mb and she recognizes, no problem
Hey guys - Thanks a million for this. I installed on my blackjack WM5 and works fine. However, it is only showing 4gb total storage - Is there something I need to do differently to make the full 8Gb available?
I am guessing I will need to upgrade to WM6 - If so, can anybody point me in the direction of the upgrade for an Australian version? I have checked the promotion site http://www.samsungmobile.com/promotion/i600/index.jsp but Australia is not listed and my version number i600DTGE2 doesnt work.
Cheers
Brenden
Help.
I get the message:
The installation on the SDHC driver was unseccessfull!
I tried to install it from the phone memory and from the memory card, still no result.
What's going wrong?
liquidsky2037 said:
Hey guys - Thanks a million for this. I installed on my blackjack WM5 and works fine. However, it is only showing 4gb total storage - Is there something I need to do differently to make the full 8Gb available?
I am guessing I will need to upgrade to WM6 - If so, can anybody point me in the direction of the upgrade for an Australian version? I have checked the promotion site http://www.samsungmobile.com/promotion/i600/index.jsp but Australia is not listed and my version number i600DTGE2 doesnt work.
Cheers
Brenden
Click to expand...
Click to collapse
hello
i have something for you --> http://wiki.modaco.com/index.php/Samsung_i607#Latest_Official_ROM_Downloads
this is latest update for black jack
look on this side .... device will be much faster with wm6 /wm6.1 not official
Hi
I have a small problem, my i600 doesn't see sd cards at all. I was hoping this driver would help but it doesn't. My phone always worked, and than suddenly it doesn't show a card anymore.
I tried on WM5, WM6, 2 microSD cards (1gb and 2gb), and an HDSD 8gb card, but still nothing
patron55 said:
Hi
I have a small problem, my i600 doesn't see sd cards at all. I was hoping this driver would help but it doesn't. My phone always worked, and than suddenly it doesn't show a card anymore.
I tried on WM5, WM6, 2 microSD cards (1gb and 2gb), and an HDSD 8gb card, but still nothing
Click to expand...
Click to collapse
Hello
Because you have card reader broken
juanfervs said:
And working in SAMSUNG SGH-i600 WM6 with card Sandisk MicroSD HC 8GB http://forum.xda-developers.com/showthread.php?t=388364
Mis pequeñines
Click to expand...
Click to collapse
Great, works like a charm; thanks a lot!
Hello there.
I'm using a fujitsu siemens pocket loox N520 too. I tried the link
http://forum.xda-developers.com/showthread.php?t=388364 as on this thread recommended, but for whatever reason couldn't unzip the file. Guys any suggestions what to do? Thanks in advance.
fujiman2004 said:
Hello there.
I'm using a fujitsu siemens pocket loox N520 too. I tried the link
http://forum.xda-developers.com/showthread.php?t=388364 as on this thread recommended, but for whatever reason couldn't unzip the file. Guys any suggestions what to do? Thanks in advance.
Click to expand...
Click to collapse
hello
Files like xxx.cab you must instal on your device, you nothing unzip just instal on your device ....
i have download this think, and i'll try tomorrow....
gonna buy those SDHC first...
thx 4 sharing....
nice! time to do some upgrading. thank you for this.
kasovnik said:
Help.
I get the message:
The installation on the SDHC driver was unseccessfull!
I tried to install it from the phone memory and from the memory card, still no result.
What's going wrong?
Click to expand...
Click to collapse
Have u tried not to insert a card ?
just start the smartphone without it. install driver from phone memory.// it gonna helps u
a !! an' don't forget 'bout unlockin' (if it's still not)
Hi Mr.juanfervs, I hope u can help me out; recently I tried to upgrade my i600 WM5 to WM6. and successfully downloaded the upgradation by WCED downloader; after the phone tried to restart & stuck up at 'Ultra Messagling'. from here the usb connection failed the PC to recognize the phone. Can you tell me 1. how can make connection between my phone and the PC; 2. how can I restart my phone and 3. how can I revive my phone. Thanks
Hi guys, I've got my asus for half a year and now I'm having some trouble. I'm using 4GB non-SDHC miniSD card, but when I put card in nothing happends and PDA doesn't find card. When i connect PDA to PC ant turn into "Card reader mode" everything works. Card is OK. Card format is FAT32 and to WM is oficial WM6 ROM
Try to format it to FAT16 instead...
Don't know if it'll help but it's worth a try, I always use FAT16 in my phones because I think it gives better performance.
Still same problem...
Now I'm trying this tool to format http://panasonic.jp/support/global/cs/sd/download/sd_formatter.html maybe it will fork
Everything works fine after fullformat with Panasonic SDFormatter
change the usb connect mode to "AS"mode. ok?