Hallo.
I'd like to know if is it possible to install an application on a specific path... I tried with CABINSTL, but some applications don't care about my settings: the installation folder is everytime the same.
Someone can help me??!!
Thanks.
maybe the applications have the destination folder specified into the CAB and the user cannot change it
Use CabInstaller v1.04
It is Freeware.
Puja...please read carefully my post before answer...
Related
Hi to everyone!!
With CABinstl I can install a program in a specific folder.
But many applications install them on pre-assigned folder; they don't care about CABinstl settings. Someone know a trick to avoid that problem??!!
Thanks
Hi all,
I just sucessfully installed big storage on my O2 mini and was wondering how i can change the default directory to which my software installs. The software is Imaginet-arabitizer and it uses a PC-based installation. No cab files...
Help please....
help
you can only whether you want to install a program to a default location, storage or a storage card. it will ask you in the beginning of installation by ActiveSync. choose NO and install sonewhere else.. gl
Still no luck....
Unfortunately, this particular program does not use the active sync user interface for the installation....
Any other methods?
i saw a shareware program on the forums once that did that... wish i downloaded it then cause i cant find it again sorry .. thought id let you know its out there though.....
aidil916 - unless it's some kind of ROM update etc, anything that gets installed on the PPC must always use a cab file, even on PC based install. So, start the install, and does add/remove programs or something come up?
Either way, if it installs something to the PPC (i've no idea how the arabizer works), interrupt the installation or somehow stall it. Then use a program like Filetracer or even the XP search tool to find any cabs installed to your pc in the last few minutes. Track down the cab (usually in your temp folder, programs folder or activesync folder) and then take a backup copy of the cab. Then, copy that to your PPC..
Tell me how it goes.
V
aidil916 said:
I just sucessfully installed big storage on my O2 mini and was wondering how i can change the default directory to which my software installs.
Click to expand...
Click to collapse
Usually when you perform PC-based installation software asks you for target location but some programs are hard-coded with "\Program Files\ProgramName" path so they will fail to work if you place them to another locations, i.e. to Storage Card
For programs that don't allow you to change target location you can change their registry entries to correct their path from "\Program Files\" to "\Storage Card\Program Files\". Here you will also need to manually move your program to a new location (SD) using Explorer's copy-&-paste functions
ps: don't use cut-&-paste because some of your programs may be running and this will cause sharing violation errors
Example, I have program "ABC" installed at "\Program Files\ABC" folder.
1) Using Explorer I navigate to "\Program Files" and COPY "ABC" folder to clipboard
2) Now I navigate to "\Storage Card" and create folder "Program Files"
3) I open newly created folder "\Storage Card\Program Files" and PASTE my "ABC" folder from clipboard here
4) Using Registry Editors I search for "\Program Files\ABC" entries and change them to "\Storage Card\Program Files\ABC"
5) I do soft-reset. If after that program works Ok, I delete "\Program Files\ABC"
The software is Imaginet-arabitizer and it uses a PC-based installation. No cab files...
Click to expand...
Click to collapse
Check your activesync's installation location. You will find the cab file within Software name or company folder, like "C:\program files\microsoft activesync\ABC"
Cheers
aidil916 said:
Hi all,
I just sucessfully installed big storage on my O2 mini and was wondering how i can change the default directory to which my software installs. The software is Imaginet-arabitizer and it uses a PC-based installation. No cab files...
Help please....
Click to expand...
Click to collapse
There are 3 methods i use,
1st is download the CAB file if you can, copy to your PPC and install with a program called CAB Install http://www.s-k-tools.com/fp/viewtopic.php?t=44 which allows you to install the app anywhere you want.
2nd is to run the standard ??.exe PC installation file but without your PPC pluged in. After the ??.exe install file is finished it will normally produces a CAB file on your PC which will copy across to your PPC next time you plug it in. All you need to is to find the CAB file and manually copy it to your PPC and use CAB Install.
The 3rd way is to do the same as 2 above and then use an app called WinCE CAB manager which you can generally modify the CAB files standard installation directory to what ever you want to.
Hope this helps
Most software including PC based installs eventually use CAB files. For this I use a small program CabInstl.
Hi,
I have a question. I have for example SPB Mobiele Shell. We all now this has to be installed via a PC and i needs a serial to install. I have the program and the serial and i would like to make a cab-file of this 2. I have a program to make cab-files, WinCE CAB Manager. Can anyone explain to me how i can do this? I like to have this on my SD-card and like to install it from there in case of emergency's. I hope someone can help me with this.
Thx
many activesync install exe's
can be renamed to zip and one can out the cab files
give it a try
Rudegar said:
many activesync install exe's
can be renamed to zip and one can out the cab files
give it a try
Click to expand...
Click to collapse
Tried that but no luck. I think this is not what i mean. I would like to turn this exe into a CAB and the key included. So when i install the Cab i don't have to register.
one would think the program maker took precautions to make that impossible otherwise your cab could be distributed as a pretty easy free version
you can try to single out what files it depend
on and make a cab file from cratchs
and if the exe or dll files got alter when the serial was given
that cab would be reg'd
otherwise you would have to find out what registries was altered in the
serial process and make a reg which which did those alterations
and get the cab file to run it
Most installations that require you to install through activesync end up leaving a cab file behind. Check Program Files\Activesync\SPB... for the cab file. If it is not there restart the installation but after you have executed the setup file leave it alone and search for the cab file again. I hope this is what you were looking for
ALL exe that install via activesync have a cab, some are hidden in the profiles temporary files, some auto-delete once installed, so leave the application hanging in the install and do a search for recent files and sort by date/time (remember to allow it to scan hidden and system folders). a lot go into the activesync directory, some go into program files, i have even found some that go into the internet explorer temp files, install, and then delete themselves. The most common hiding place is your computers profile temp folder --- typically found under
C:\Documents and Settings\PROFILE\Local Settings\Temp
just dig around, its not to difficult once you find the 3 most basic hiding places.
good luck.
Sponzert said:
Hi,
I have a question. I have for example SPB Mobiele Shell. We all now this has to be installed via a PC and i needs a serial to install. I have the program and the serial and i would like to make a cab-file of this 2. I have a program to make cab-files, WinCE CAB Manager. Can anyone explain to me how i can do this? I like to have this on my SD-card and like to install it from there in case of emergency's. I hope someone can help me with this.
Thx
Click to expand...
Click to collapse
You can simply download the CAB files from SPB site directly.
Sponzert said:
Hi,
I have a question. I have for example SPB Mobiele Shell. We all now this has to be installed via a PC and i needs a serial to install. I have the program and the serial and i would like to make a cab-file of this 2. I have a program to make cab-files, WinCE CAB Manager. Can anyone explain to me how i can do this? I like to have this on my SD-card and like to install it from there in case of emergency's. I hope someone can help me with this.
Thx
Click to expand...
Click to collapse
I have run into a similar situation where my installation was failing due to the huge size of a CAB file.
In my case, the size of the CAB was nearly 23mb and the free storage left was around 26mb. This made the installer fail as it ran out of space midway during the install.
I know one thing for sure was that the PC installers (Exes that would run on the PC that would extract the CAB on the device) would extract the CABs and put them in \windows\appmgr\install folder and would trigger the installer on the device.
So during my second attempt, when the device prompted for installation location "device or storage card", I opened up the explorer on the device (guess you can do the same thing with Windows Explorer since your would stay connected over USB using Activesync) and went into \windows\appmgr\install folder and made a copy of the cab to the storage card (you can copy to your PC as well).
Exited the installer and then installed the cab from the storage card and the installation went fine.
Not sure about how the SPB apps work since there are two options during the PC install. Trail or Registered version. Based on the option chosen, it would either extract the necessary CAB (either trial or registered). I hope it creates a "Registered" version of the app in the CAB after you follow the above steps.
Hope this helps.
PS: I wish that the standard install location on the device "\windows\appmgr\install" be changed to the storage card by some tweaks. So far not successful in finding/getting one.
vprabu said:
I have run into a similar situation where my installation was failing due to the huge size of a CAB file.
In my case, the size of the CAB was nearly 23mb and the free storage left was around 26mb. This made the installer fail as it ran out of space midway during the install.
I know one thing for sure was that the PC installers (Exes that would run on the PC that would extract the CAB on the device) would extract the CABs and put them in \windows\appmgr\install folder and would trigger the installer on the device.
So during my second attempt, when the device prompted for installation location "device or storage card", I opened up the explorer on the device (guess you can do the same thing with Windows Explorer since your would stay connected over USB using Activesync) and went into \windows\appmgr\install folder and made a copy of the cab to the storage card (you can copy to your PC as well).
Exited the installer and then installed the cab from the storage card and the installation went fine.
Not sure about how the SPB apps work since there are two options during the PC install. Trail or Registered version. Based on the option chosen, it would either extract the necessary CAB (either trial or registered). I hope it creates a "Registered" version of the app in the CAB after you follow the above steps.
Hope this helps.
PS: I wish that the standard install location on the device "\windows\appmgr\install" be changed to the storage card by some tweaks. So far not successful in finding/getting one.
Click to expand...
Click to collapse
Thank you, this did the trick for me. Installed en included the registration.
Welcome. I am happy that I could be of some help
vprabu said:
Welcome. I am happy that I could be of some help
Click to expand...
Click to collapse
Now i have everything in registered Cab-files on my SD-card. Now i can make the switch to WM6. I'm dutch and have a P3300 and i guess it will take some time before HTC wil come with a dutch WM6 upgrade, so maybe not the place to ask but do you now where i can find a original English WM6 for the P3300?
Hello all,
I am trying to create a cab file for some application (exe file) that I have.
I use WinCe cab manager ... I figured out how to create the cab, which I have then been able to install.
My question is - After installation, the program shortcut does not appear in the programs menu, both in the start menu or in the list to add quick launch icons.
(i can launch the program by navigating to it ...Program Files et al)
Can someone please help me, and let me know what I need to do to list it in the programs list??
Thank you for assistance.
govindar77 said:
Hello all,
I am trying to create a cab file for some application (exe file) that I have.
I use WinCe cab manager ... I figured out how to create the cab, which I have then been able to install.
My question is - After installation, the program shortcut does not appear in the programs menu, both in the start menu or in the list to add quick launch icons.
(i can launch the program by navigating to it ...Program Files et al)
Can someone please help me, and let me know what I need to do to list it in the programs list??
Thank you for assistance.
Click to expand...
Click to collapse
Did you create a shortcut in Cab Manager? It does not do it automatically.
It might be easier to help if you post the cab so others can see how it's setup.
Thank you
xawen said:
Did you create a shortcut in Cab Manager? It does not do it automatically.
It might be easier to help if you post the cab so others can see how it's setup.
Click to expand...
Click to collapse
Thank you, Sir. I did figure it out a few minutes ago.
Attached is the cab file - It is for the SEND RECEIVE ALL program. It was posted as an exe file by Krazy_about_technology at this link ... http://forum.xda-developers.com/showpost.php?p=3578322&postcount=1
He included an exe file ....and I have now created a cab file with it ....
Figured someone might need it like I did ... http://forum.xda-developers.com/showpost.php?p=4974002&postcount=1
Thanks.
Moved as not software release or development.
Please take your time to read the rules.. http://forum.xda-developers.com/showthread.php?t=447646
HI all !!
I came up with a new idea to create a file oemavatar.cab for Toshiba TG01. I made graphics in PNG format and then it tried to pack them into a CAB file. Now I am looking for a program where I could make a CAB file and add it to the ROM.
I found some programs, but the archives are not compatible with WP7 and Zune just does not detect the file.
My question is: Which program to use to execute the cab file?
You have to use a CAB sender program to send the CAB file to the phone's update OS (the one that Zune switches the phone to when installing updates; you can put it in that mode manually too). You don't use Zune with manual updating.
I don't know what structure to the CAB file the phone expects (although you could download an official CAB and have a look for yourself). You will probably need to sign the CAB with a key whose certificate is loaded into your ROM; I know there are programs for doing this but not all ROMs are updatable.
Thanks for quick reply
I know how to use the CAB SENDER
I just meant that if I add the oemavatar.cab is an application ZUNE should show a picture that is in that file ... if you connect phone to the PC .
If I add the original cab of Omnia 7 (OEM / ZUNE_PIC) ZUNE shows the picture of the Samsung ... if I add my cab file , zune does not show what's there ...
as if the program can not read information from a cab file
I enclose two cab files ...
I found a solution
You should post it! That way, future people with the same or similar goals don't have to post another request for help, they can just search and find it.