Hello,
I'm going to buy the new Holux 231.
My device is the Qtek 2020 and the software is the TomTom 3.
Is this Holux ok for the Qtek/TomTom ?
Regards,
J.
Related
Please help...
Does anybody have the drivers &/or configuration to get the Bluetooth Rikaline working with my XDA 2.
Thanks in advance
Have you downloaded towas patch? What are the problems, is it connecting ok and allowing pairing?
XDA2 and Rikaline 6031-X7 and Navigator 3.0
Hi, pairing is not a problem; also outside buildings the xda2 reports the satellites; but the geographic location is not reported.
Any idea?
Thank's Dieter
XDA2 ROM Version 1.72 german
i have buy the pda gps gh101.... see www.usglobalsat.co.
the site says that is compatible whit xda2i pda.
my qtek 2020 don't work whit gh101 (unable to open com port)
i have a question:
qtek2020 and xda2i have a compatible connector?
if not please write me the difference.
i cam modify the adaptator for my qtek
please help me and excuse me or my english
:roll:
turn off recieve beam incomming that should release your com port
I have an SPV M1000 and updated the Rom 2003 -> WM2005 with AKU 3.5 24MB Pagepool and 40MB RAMDisk WWE. It works perfect. I've installed Tomtom 6 and solved the problem with the backlight.
BUT the SPV won't pair with my BT gps ; it finds the BT gps and when I fil in the `0000´ it won´t accept. Because of wm2005 I have more COMM ports but this won´t help!
Does anyone have a solution??
Widecomm perhaps ??
TheNoxx
------------------------
Rom Version : 3.50b.40CS
Rom date : 01/013/07
Radio Version : 1.10.00
Protocol version : 1337.18
Model : PH10A
Just to confirm, have you paired the GPS before with 0000 ?
I have looked in the manual and for pairing I need "0000"
I using the BT gps with my Nokia 6260 smartophone and it works perfectly
SO ???
Do you need to put the GPS into pairing mode first? Most don't even have a pairing mode that I have seen, but perhaps yours does?
Also, maybe you have your phone's BT on, and it's not able to pair with your PDA because it's connected to your phone?
My ralkaline BT gps needs to pair with "0000" just like the original Tomtom gps.
I have now comm ports 0 to 9 available ; but this won't help
I need comm port 10 for this device
Problem solved
I bought an Tomtom wireless GPS Sirf III,
Perfect !
Hi everybody,
Does anybody have an idea regarding internal GPS receiver ist not recognized from tomtom navigator.
Or do i have to activate GPS seperate ??
Thanks to everybody
Hello,
I have just received my new bluetooth GPS / TMC "mouse" receiver, the GNS5870 and I'm trying to use it over a BT connection with my IGO8 software. The GPS signal is super, but when I try to activate the TMC, Igo will not detect any "TMC hardware"... What I'm doing wrong?
I have to mention that I make the tests on my pda (a Dell Axim X30i) for the moment and if everything is ok, I will test it on my Kaiser also.
Thanks in advance for your answers and wish you a very Happy New Year!
Conrad