When setting up TT - my vicsat antenna isnt mentioned in the list, so I cant get any signal from my GPS. Is it possible to choose another brand ?. How do I connect my XDA/Tomtom with my vicsat ?
problem solved - my beam was on - sorry
Related
When setting up TT - my vicsat antenna isnt mentioned in the list, so I cant get any signal from my GPS. Is it possible to choose another brand ?. How do I connect my XDA/Tomtom with my vicsat ?
I have bought a Falcom Navi 1 BT GPS receiver to use with my xda2 (O2 rom 1.72.187) and Destinator 3. I have also downloaded the Dell axim bt patch and have set it to COM 0. When opening the Destinator sometimes the GPS is found, but most of the times it is not! The receiver is correctly set in the Destinator program at com 0. Anyone had this sort of problems before?
BTW, I have also tried the old Bluetooth tools as well with no result.
please help.
GPS Gate
Hi I have experienced the same problems with Falcom Navi 1 BT GPS and HandyMap 2004. My solution was GPSGate from www.franson.biz
Hope this helps
http://franson.biz/gpsgate/support.asp?kb=5&platform=winxp
Kind regards
GPSGate didn't work either. Also tried the pocket bluetooth tools, but this sets the bt gps at com7 which Destinator does not see. Any more ideas guys?
I can strongly reccomend upgrading to WM2005 it works like a charm
I cannot start using my navi kit for many days because of one problem: I leave BT GPS receiver outside for at least 20 hrs to initialise, connect to device regularly, run NAVIGON and get always the same message - "A GPS receiver has been detected, but a convinient GPS signal is not available. The reception is obstructed, or the receiver is being initialised."
Any idea what to do?
Slaven, it could be a faulty receiver, do you have a program for viewing the signal and number of sats being received? It maybe also that the settings are wrong for the gps, what is the model of receiver you are using and details please of how you set it up when bonding etc. Have you carried out a factory reset of the receiver also? One other thing, sometimes a gps reciver will work much better for initialising first time if it is mobile rather than static, put it in the car and see if you have any results after a mile or 2. Try this program to test the gps function.
Please check your PM I have sent one to you. thanks.
I`m using BT GPS receiver delivered in original kit with Navigon 4 (made by GNS). I`ve bonded them regularly (XDA II asked for code and I entered 0000 - as described in operation manual). I have not performed factory reset of GPS rec. because don`t know how to do that. I couldn`t find any possible way to do that, except to remove BT and TMC moduls and I have done so.
Thank`s for gpsdiag, but I don`t know hoe to connect BT GPS with my notebook (with built in BT) to test it. Only service available is to connect it to serial port, but couldn`t. As you can conclude, I`m not very experienced with this, so I need really DETAILED help! Thank`s in advance.
Sorry, I sent the wrong version of diag, I will pm you the proper file.
The BT version of serail port on qtek is not compatible with wildcomm BT (used by navigon) got to navigon website and download the wildcomm patch
this will solve your problem
I was using navigon with wired gps and then tried bluetooth which dropped signal and refused to reconnect, thanks for the link I will try it.
I did the pairing with my pc and if I send a file from the Magician to Pc I have no problem.
The problem is sending a file from the Pc to the Magician..
are there any fixes?
A similar problem is with my external bluetooth GPS I do the pairing but I get no signal from any COM* port
Do you set "Start->Settings->Connections->Beam" and also BT visibility ON?
Yes. The PC see the "Magician" but then I'm not able to send anything
http://forum.xda-developers.com/showthread.php?t=354198&page=2
It seems that others have problems with WM6.1 and BT GPS.
Does your external GPS work with Magician/WM6.1 ?
I have the same problem with my GPS receptor. How can I solve this problem..???
Please I need help.
NeoMM: are u able to receive a file via BT in the Magician?
I don't want to go back to WM2003!
I think there is a problem with the BT stack on WM6.1, went I try to send a file to the magician it wakes up but no notification is provided (and then "Connection refused" on the pc).
is possible to hack the BT in some way?
assente,
I can send files to other devices, but I can`t receive files from them.
up
How do the others WM6.1/Magician fix the Bluetooth stack?
tomtom doesnt like GPS from BT, but i use Igo 8.3.2 and GoogleMaps and it works well..
Pairing of BT GPS
I can confirm a perfect pairing of Holux 236 and Holux M1000B with the WM6.1 BT set up.
I can confirm a perfect operation with 4 separate GPS software Sirftech, GPS-info, Swedish Hastighetskamror(speed cameras), Swedish pocket kartex.
I can confirm a perfect pairing and file transfer with / to Sonyericson Xperia
I have sofar not tested TomTom.
Please devide your info concerning pairing and operation of GPS software.
P-O
I have fixed the BT GPS issues following the tips on http://forum.xda-developers.com/showthread.php?t=499983
I have fixed my problem with the BT GPS following the tips on http://forum.xda-developers.com/showthread.php?t=499983. But i still having trouble receiving files by BT from other phones. I need help please
Any WWE_O3 users could say something about the Bluetooth?
Does it work now?
Hello,
I have just received my new bluetooth GPS / TMC "mouse" receiver, the GNS5870 and I'm trying to use it over a BT connection with my IGO8 software. The GPS signal is super, but when I try to activate the TMC, Igo will not detect any "TMC hardware"... What I'm doing wrong?
I have to mention that I make the tests on my pda (a Dell Axim X30i) for the moment and if everything is ok, I will test it on my Kaiser also.
Thanks in advance for your answers and wish you a very Happy New Year!
Conrad