Database Info

4gb sdhc problem

Greetings, World.
Every now and then a complete idiot writes in and asks a stupid question.
Well I cannot be a complete idiot because I've had my appendix taken out, but I do have a major challenge with this old SPV M2000. I've gotten it shifted to Vodafone UK from Orange. However I've had no success getting it to notice that I've put in a 4Gb card. I assume it doesn't need formatting since it's brand new, and I haven't found how to as yet anyway. Anybody got any clues?
Jim

Your phone probably doesn't support the 4GB that use the 'new' SDHC format .

SDHC driver from VOX

Is it possible to use the SDHC driver from VOX platform on Tornado? I guess the question is whether they share the same SD hardware?
Thanks.

Has anyone tried whether SDHC works with any of the latest WM6 releases? Didn't read no posts in that direction...
Would sure be sweet to get SDHC running on the Tornado. In fact, the option to use HC is what's pushing me towards buying a new device since I'm using my phone (C600) as a digital audio player every day.

Its a no go so far
I just tried (i have 2x4gb miniSDhc cards) and Tornado with WM6 v6 does not see any card installed :-/

Thanks for the info man! To bad it doesn't work yet.

Atom life & 8GB Mircro SD *Urgent*

Dear members
I would like to know from you if you have ever tried your hands on atom life with 8gb microsd[minisd adaptor]. I just bought an atom life & wish to know if it is possible to use this card. I have upgraded to WM6.1 PDAViet but don't know if that really going to work with an 8gb card. I heard now there is a support for more than 2gb so plz confirm if there are any issues involved.
Regards
Saksham

There is a SDHC card patch avaliable for WM5 and WM6. Not sure if it work on WM6.1. Basically what this patch does is that it allows Windows Mobile to recognize SDHC memory cards.
I have the patch installed on my KS20, but i am only using 1 GB memory card, so can't confirm if it works for me. However, people report that it works. I've had no problems so far, everything is perfectly fine. My phone functions normally with the patch installed.
I am sorry that i can't confirm whether the patch will work on WM6.1, perhaps an expert can help you.
And before i forget, here is the link to the patch: http://forum.xda-developers.com/showthread.php?t=344338&highlight=SDHC

so nice of you my friend. it seems it does going to work. will report back with my experience.

How use a 4GB Card on Qtek 9100 ?

Hi,
I bought a 4GB mini SD-Card from amazon. Now I realize, that it doesn't work
with my Pocket PC (Qtek 9100). During being in despair and searching for a soulution I read ofttimes that it is possible to use it, if I install a SDHC-driver or by installing WM6. I'm unfortunately an absoulute beginner without knowing what to do next. Any ideas what can I do to solve this problem? I have a HTC Qtek 9100. Thanks for your help!
greetings,
reptile_05

If it is an SDHC card you are probably on a lost cause. The Qtek 9100 was in production before the SDHC spec and cards appeared (June 2006). The price of relentless progress I am afraid.

What a pity!
You know if the are 4GB-cards, which I can use for my PPC ?

SDHC cards won't work. Some SD cards > 1Gb may work, it depends on the build date of your phone. Sorry I can't be more specific. More over at this thread. :-
http://forum.xda-developers.com/showthread.php?t=327865
A trial and error approach my be safest. Beg, borrow or steal a card to try it out, and if successful, try to track down the exact same item.
Good luck!

Trinity with WM5 - SDHC 8GB working fine

Hi there,
I've been following this great forum for a long time. Congratulations to all who make this a great place to learn everything about our mobile phones.
Well, I don't know if this is new to everybody here (I searched and I found nothing about this), but I've managed to see all the 8gb of a Kingston microSD (+ adapter, of course) in my WM5 (original rom) Trinity. I've tried all the cabs I've found and this one really works.
Hope it works with you too. Try it and give some feedback.

Trinity with WM5 and 16GB SDHC card working
Me too, I have a 16Gb Kingston SDHC card working in my WM5 HTC P3600 and also my WM5 HX2490b PDA thanks to those drivers. I was going to bite the bullet and upgrade to WM6.1 but no need to now..

f513toy said:
Me too, I have a 16Gb Kingston SDHC card working in my WM5 HTC P3600 and also my WM5 HX2490b PDA thanks to those drivers. I was going to bite the bullet and upgrade to WM6.1 but no need to now..
Click to expand...
Click to collapse
Hi.
Are you saying that on Windows 6.1 and Windows 6.5 ROMS, there is no need to install any cab?
In my experience with both 6.1 and 6.5, after a soft reset, my device fails to see my 4gb kingston micro.
I'm still looking for a solution... has anyone tried the above cab on a Trinity with cooked 6.5 ROM like Tommei45's?
Thanks,
Mattster.

Grazie !!!!!
Thanks a lot! It runs to 100% on my trinity WM5 with Original Italian Rom. Again, thanks to you very, very much !!!!

I did buy a Kingston micro SD class 4 with 4GB and it works on my trinity 3600 with Karmba_a Rom.
Any experience with more Gigs like 8 or even 16?
Regards,
f

This is exactly what I'm looking for. Beside my Diamond I still use my old Trinity. I've been using this GPS WM5 ROM since came out and with 1.56 radio it works excellent. Just installed the driver, I go and buy a 16G SDHC as it said to be working. Feedback later. Thanks!
Edit: Works fine! I've bought a 8 gig SDHC class6 micro card with mini adapter and have been using for weeks now. Perfect.

hey guys, what about WM6.5?
Does it work with memory bigger than 4GB?

Caio said:
hey guys, what about WM6.5?
Does it work with memory bigger than 4GB?
Click to expand...
Click to collapse
I'm kind of curious myself. Does WM 6.5 recognizes SDHC on Trinity?
I've just installed nAr & Icke WM6.5, and my old (original) TomTom navigator 6 doesn't install.
So now I have to install a new GPS program, but my 2GB SD is not enough.

Mattster_spv said:
Hi.
Are you saying that on Windows 6.1 and Windows 6.5 ROMS, there is no need to install any cab?
In my experience with both 6.1 and 6.5, after a soft reset, my device fails to see my 4gb kingston micro.
I'm still looking for a solution... has anyone tried the above cab on a Trinity with cooked 6.5 ROM like Tommei45's?
Thanks,
Mattster.
Click to expand...
Click to collapse
SDHC support depends on the kernel drivers - the original WM5 trinity roms had no SDHC support, so the cab was needed.
Every cooked rom based on the latest WM6 kernel for trinity has proper SDHC drivers, so no need for an extra cab.
For your soft reset problem I suggest changing the rom or the card, or re-formatting the card. The SD standard allows 2GB max, and only SDHC allows bigger cards. There were non-standard 4GB SD cards when the SDHC standard was not finished, so maybe it's an early non-SDHC 4GB card?
I know for shure with my WM6.5 rom I have no problems using a 8GB SDHC micro with adapter, not even after soft reset.

ickebins said:
I know for sure with my WM6.5 rom I have no problems using a 8GB SDHC micro with adapter, not even after soft reset.
Click to expand...
Click to collapse
Well, since we have the same model phone, radio and ROM, can you tell me what brand is your card?
EDIT:
I finally got a 8GB micro-SD (with mini-SD adapter) from Ebay. Didn't need to do anything for it to work. Just opened the slot, slide it in, and "Voilá!" 7,6GB extra space

I need your help!
I look to update my Swisscom Assistant XPA v1510 (HTC P3600) from WM5 to WM6 /6.1 or 6.5 (and also a newer TOMTOM-Version). But i have no idea which WM6-Version is fully compatible to my XPA v1510 from Swisscom (Swisscom herself does’t support any higher WM-Version)
Where can I find the needed SW and how can I update/upgrade my XPA?
Regards
[email protected] / mobile +41 79 442 06 06
Martin