Guys,
Like a lot of people here, I sometimes use a Notebook PC to connect to my work over VPN via my Universal. I've always used "Modem Link" as it was more reliable than "Wireless Modem".
In the most recent WM6 Roms, "Modem Link" seems to have disappeared, replaced by "Internet Sharing".
My Telco, like a lot of others, uses a NAT'ed IP address to provide GPRS/3G internet connectivity. "Internet Sharing" also uses IP NAT'ing to share the Telco's IP address. This creates a situation where you are NAT'ing a NAT'ed IP address.
To explain further:
1) Real internet ip address: 203.134.56.123
2) It is then NAT'ed by Telco and becomes 10.0.0.1
3) It is then NAT'ed again by "Internet Sharing" to become 192.168.0.1
This situation is fine for normal web browsing, but won't work when using a VPN client(ie: Cisco). Most VPN clients wont tolerate Double-NAT'ing.
Has anyone experienced this scenario?
Are there alternatives to "Wireless Modem" & "Modem Link"?
Is there a "Modem Link" cab floating around that can be installed separately on the newer WM6 ROM?
Or is there any way to get "Wireless Modem" working reliably?
Thanks,
Simon
stw303 said:
Guys,
Like a lot of people here, I sometimes use a Notebook PC to connect to my work over VPN via my Universal. I've always used "Modem Link" as it was more reliable than "Wireless Modem".
In the most recent WM6 Roms, "Modem Link" seems to have disappeared, replaced by "Internet Sharing".
My Telco, like a lot of others, uses a NAT'ed IP address to provide GPRS/3G internet connectivity. "Internet Sharing" also uses IP NAT'ing to share the Telco's IP address. This creates a situation where you are NAT'ing a NAT'ed IP address.
To explain further:
1) Real internet ip address: 203.134.56.123
2) It is then NAT'ed by Telco and becomes 10.0.0.1
3) It is then NAT'ed again by "Internet Sharing" to become 192.168.0.1
This situation is fine for normal web browsing, but won't work when using a VPN client(ie: Cisco). Most VPN clients wont tolerate Double-NAT'ing.
Has anyone experienced this scenario?
Are there alternatives to "Wireless Modem" & "Modem Link"?
Is there a "Modem Link" cab floating around that can be installed separately on the newer WM6 ROM?
Or is there any way to get "Wireless Modem" working reliably?
Thanks,
Simon
Click to expand...
Click to collapse
Hi,
WModem will be in my latest release with Laurentius, due for release on 1st November.
The problem with most of the current releases that include it, is that the reg on the PDA does not have the correct settings to report the driver name to the windows machine (the entries have been left as generic)
I have just tested WModem and it works fine, over USB.
Cheers,
Beasty
beast0898 said:
Hi,
WModem will be in my latest release with Laurentius, due for release on 1st November.
The problem with most of the current releases that include it, is that the reg on the PDA does not have the correct settings to report the driver name to the windows machine (the entries have been left as generic)
I have just tested WModem and it works fine, over USB.
Cheers,
Beasty
Click to expand...
Click to collapse
Thanks Beast. That makes a lot of sense.
Now for the most obviouse question. Any chance of making a WModem CAB files with those reg settings? Or even easier, list the relavent reg keys and the correct values.
Thanks again,
Simon
stw303 said:
Thanks Beast. That makes a lot of sense.
Now for the most obviouse question. Any chance of making a WModem CAB files with those reg settings? Or even easier, list the relavent reg keys and the correct values.
Thanks again,
Simon
Click to expand...
Click to collapse
Hi Simon,
This should be all you need to change to allow the emulation to be correctly detected by your PC............ I assume you have the PC driver and dialer.
Unless the Rom you are using has more missing.
[HKEY_LOCAL_MACHINE\Drivers\USB\FunctionDrivers\USBSER_Class]
"Manufacturer"="CDMA1X USB Modem"
"Product"="CDMA1X USB Modem"
Cheers,
Beasty
beast0898 said:
Hi Simon,
This should be all you need to change to allow the emulation to be correctly detected by your PC............ I assume you have the PC driver and dialer.
Unless the Rom you are using has more missing.
[HKEY_LOCAL_MACHINE\Drivers\USB\FunctionDrivers\USBSER_Class]
"Manufacturer"="CDMA1X USB Modem"
"Product"="CDMA1X USB Modem"
Cheers,
Beasty
Click to expand...
Click to collapse
These are the actual required OEM settings:
[HKEY_LOCAL_MACHINE\Drivers\USB\FunctionDrivers\USBSER_Class]
"Dll"="serialusbfn.dll"
"DeviceName"="USBFNS2:"
"Prefix"="COM"
"DeviceArrayIndex"=dword:1
"RxBufferSize"=dword:4000
"IClass"=multi_sz:"{CC5195AC-BA49-48a0-BE17-DF6D1B0173DD}","{C375C787-B721-4b8e-B67F-A112D5C0A404}"
"idVendor"=dword:0bb4
"Manufacturer"="HTC"
"idProduct"=dword:0cf
"Product"="HTC USB Modem"
"bcdDevice"=dword:90
"Tsp"="Unimodem.dll"
"DeviceType"=dword:0
Also note that the only important keys for driver identification are:
"idVendor"=dword:0bb4
"idProduct"=dword:0cf
These two keys make up the "VID" and "PID" that windows uses to match all drivers to PNP hardware (AKA "Device Instance ID" and "Hardware Ids"). Without the proper VID and PID windows will never match the Modem to the drivers that are provided.
If you want to review it for yourself, just open the modem driver (USBMDM.INF) file and look for the "[HTC]" tag. See below for example:
%USB\VID_0BB4&PID_00CF.DeviceDesc% = Modem1, USB\VID_0BB4&PID_00CF
Hope that helps you guys...
-Jwrightmcps
hi guys.. dyou have extracted cab files each of these? badly needed. thnx!!
Which version of wm6.1 has good Modem link or wireless modem?
My mobile wont detec after rom upgrade to wm6.1
Hi Beasty, Simon
I am very much familiar with Internet Sharing
I want to know how a modem link works.
Like I have gone to Modem link application and
Selected USB as my connection ans have provided my Access point specified by my Service provider.
Pressed the activate. Status has become Active.
After this, how to browse Internet over my PC.
No Network has been detected by My PC.
Please reply me as soon as possible so that i can move further with my proceedings
Thanks
Kranthi Kumar
Do you know which version of wm6.1 has a modem link option.
Modem link for WM6.1 TNT rom
hi ,
Tell me how to use modem link on TNT Rom WM6.1
Thanks.
Is there a Bluetooth printing solution available? I am trying to print to an Oneil MF4Te Thermal Printer. Any help would be greatly appreciated.
Is there a Bluetooth printing solution available
stickerbob said:
Is there a Bluetooth printing solution available? I am trying to print to an Oneil MF4Te Thermal Printer. Any help would be greatly appreciated.
Click to expand...
Click to collapse
I have been searching heavily for this bluetooth printing solution. This would be a powerful addition to Android. This goes a long ways towards replacing my notebook traveling with me. I have found the mobile printers but waiting on Android and like the HP470. I will keep looking and if I find it I will let you know as well.
Thanks for the similar need
I know there is one application to print pictures to any HP printer wireless. but i want to know if there is one to print documents, etc...
joselon said:
I know there is one application to print pictures to any HP printer wireless. but i want to know if there is one to print documents, etc...
Click to expand...
Click to collapse
jetcet print does a good job, wireless printing of all file formats ie documents, pictures and email...just searck for it from the leo apps
okidem said:
jetcet print does a good job, wireless printing of all file formats ie documents, pictures and email...just searck for it from the leo apps
Click to expand...
Click to collapse
I do not have JetCet installed on my HD2. Are they suppose to be there in T-Mobile USA HD2s as well? Wondering Just in case, could you extract a .CAB file (or whatever works) and send it to me. Hopefully, others like me can also benefit from your contribution.
Hp color laserjet 5550
i have a problem.i can't print from my HTC HD2 to the printer HP Color laserjet 5550.can u help me to instal or can u tell me why i configured it?thank u.
Gil00 said:
i have a problem.i can't print from my HTC HD2 to the printer HP Color laserjet 5550.can u help me to instal or can u tell me why i configured it?thank u.
Click to expand...
Click to collapse
hello mr.vague
i install jetcet to my htc hd2 and i have the ip from the Printer,from my laetop i can print,because i have get a htc hd2 .i will later don't use my laetop again.i take for the install deskjet 5550 serie and i try to print no result,i try with color laserjet serie and i don't get a test page.no result.i unstall the jetcet and iinstall it again and i get the same,nothing coming to the print.i want to know if somebody can help me.Thanks
jetcet only support a few model of printers......and do not support my brother c4040CN.... is there any other better program to do better job?
Hi.
I use Jetcet Print with my HP Photosmart C4780, and Jetcet have not drivers for this model of printer. But I have used the build in Photosmart C3100/C4100/C4200 driver with my C4780, and all works fine. Maybe you should use similar method for your hp.
Sorry for my English
Hi guys.I need a help badly. I got a Optimus SP5721 pda and zebra rw420 bluetooth printer on it. My app is running on terminal services. I need to print some recipes from this app...Bluetooth printer is connectted from com3 port to pda..In the rdp options there is share serial ports but its not work for me...
How i can print from terminal service to my bluetooth printer...Is it posible or ?
Pda is runnin on CF 5.0. Ty for any help and sry about my wrost english
I hope someone can help me! Im looking for a windows mobile app to use on my HP IPAQ Glisten where I can take a picture of the VIN number on an automobile or barcode and insert the text into another running app. I purchased an Socket SDIO infrared barcode scanner for another phone that worked great by scanning barcode, converting it to text and inserting into another program you could designate in setup. I dont have SDIO slot now ant want to use camera. Thanks all!
I think you should buy SDK and develop the application yourself or hire some one develop the program for you. AIPSYS has the professional SDKs and professional teams for program customization.