Related
http://www.noreve.com/brand/HTC/product/Housse_cuir_HTC_P3600_-_HTC_Trinity_-_SPV_M700.html
This may be old news, but I just found it, and didn't see it listed here. Ordered one and will post my impressions here when I get it.
I've got this one already from http://www.inkino.co.uk/zen/index.php?main_page=product_info&products_id=1547
VERY nice case!!!
Yep, it's a nice case
Got it in 2 days (FedEx from France to California.) It fits nicely, and it's not bad looking, as far as cases go (I still much prefer the "naked" Trinity.)
I doubt it would be much protection in a fall, particularly if it lands on one of the bottom edges, which are exposed through the access cut-outs.
Access is to the phone is easy, just flip up the cover, which is held by a weak magnet. The belt clip is removable, but there is a flat-head metal screw covering the hole in the back (I am not big on belt clips The materials and workmanship are not Prada, but not really bad either.
Overall I am happy with the Noreve case and recommend it.
Hi
Has anyone had any problems with the
"BLACK RESIN Soft Gel Case for the HTC DESIRE" from ebay
As it is quite 'firm' I'm concerned over time it will scratch or damage the desire's casing ..
Does anyone know of a decide soft flexible silicon case for the desire. One that can't damage the casing...?
any ideas / or comments ?
you might want to look at the invis shield thread which people are using, that seems to do the trick and is good
Thanks. Not sure I like them.
I got one. It is quite difficult to fit the desire in as the case is quite tight. It looks ok though after fitting the phone in
I have been using a 'Gel' case off ebay for about a month now and i too had concerns that it would damage to phone but I have taken it off a couple of times and there isn't a single mark anywhere on the phone!
It was a UK based one for like £2 i got.
Phil
I think a gel case would be OK, but this is a 'resin' case.. which is a little firm..
Thats what concerns me !!
Well mine is like a resin I guess. Like soft plastic material. It is quite firm and takes a bit of getting the phone in/out but like I say it hasn't make a single mark on the phone.
Phil
Cheers Phil..
I've ordered a cheap soft silicone case.. I'll see how that compares..
I had one of the soft silicone ones and although they are good protection wise and easy to get on and off I had a couple of issues with it.
I found that it made the rear of the phone go 'weird'. Hard to describe really but it made marks on the back cover with it being rubberised and having the rubber case on it left marks on the cover. They have rubbed off and dissapeared over time but I only used the case for about a week.
I found that it made the phone very bulky hence why i went for the 'Gel' one.
It was hard to get it in and out of my pocket as it gripped on my clothes too much.
Phil
Thanks for the replies.
The soft silicone case has arrives, doesn't feel as nice or fit as well as the resin case.
But doesn't feel like it will do any damage to the phone.
I'll see how I get on
i have one if those soft silicone cases, and ive noticed that when i remove it the back of my desire is unusually shiny, and now im wondering if that will return to the original non shine surface..
I had the same thing. It has returned to the normal state after using a gel case for a while.
Phil
philje123 said:
It was hard to get it in and out of my pocket as it gripped on my clothes too much.
Phil
Click to expand...
Click to collapse
This is why I went with the cheapo Gel case. I've had mine off and on a few times - no marks or anything. I was sending a text in a club and the phone was knocked out of my hand across the floor. No marks on case or anything.
The silicone case I have for my Blackberry is great although it tends to pull everything out of your pocket including the inside of the pocket - little annoying. Although it sticks to everything. you could leave it on the dash board of the car whilst driving and it wouldnt move at all.
pro's and cons. I prefer the gel one personally. Although the silicone stickyness comes in handy.
haha, my soft silicone case lost some of its traction i dont know why lol.
I've been looking around for cases for my desire,
can anyone recommend any sites that sells the resin gel ones the cheapest and has reputation for fast shipping?
I live in Canada, as much as I enjoy buying stuff online, I feel like I have to wait for like 100 years for an item to get here.
just changed my resin case to a soft gel.
Feels better add that to my new pouch that take the desire in the gel case..
Sorted
Hello I am wondering if anyone knows of a good quality horizontal belt holder that works with the g5 and allows for a case? My case is not very thick but I would not call it slim either.
To give you an idea of what I mean by good quality I want it to be leather and the last one that I had was actually fake leather and the support was cardboard. That one got decent ratings on Amazon for quality but when it fell apart it became clear that it was not good.
I use this belt clip on my V10 since I was unable to to find a holster for it. It works great! and it fits the G5.
http://www.amazon.com/mophie-Belt-C...&redirect=true&ref_=oh_aui_detailpage_o09_s00
I also use the Seideio LGG4 Cased jholsteras well
thexder1 said:
Hello I am wondering if anyone knows of a good quality horizontal belt holder that works with the g5 and allows for a case? My case is not very thick but I would not call it slim either.
To give you an idea of what I mean by good quality I want it to be leather and the last one that I had was actually fake leather and the support was cardboard. That one got decent ratings on Amazon for quality but when it fell apart it became clear that it was not good.
Click to expand...
Click to collapse
Let me know if my suggestion helps
I use this belt clip on my V10 since I was unable to to find a holster for it. It works great! and it fits the G5.
http://www.amazon.com/mophie-Belt-Cl...ilpage_o09_s00
I also use the Seideio LGG4 Cased jholsteras well
Click to expand...
Click to collapse
I never used one of those, but every case or holder with a plastic clip I have had has broken within 3 months. I am not sure I want to spend that money on something that my experience indicates would probably not last very long.
I almost forgot that in previous experience I have had problems with clips like that causing the phone to fall every time I get out of my car and I noticed a few reviews mentioning that on that clip as well. Seems like a bit of a risk to me.
Found this thread and the suggestion by @shaun0207 and figured I'd give it whirl! Thanks for that!
I have the Otterbox Defender (too damn bulky), the Evocel holster/clip (too flimsy and difficult to remove from belt clip) and now am going to try the Spigen walletcase in conjunction with the mophie universal clip
I'll let you guys know how it works out
MIKESTONY said:
Found this thread and the suggestion by @shaun0207 and figured I'd give it whirl! Thanks for that!
I have the Otterbox Defender (too damn bulky), the Evocel holster/clip (too flimsy and difficult to remove from belt clip) and now am going to try the Spigen walletcase in conjunction with the mophie universal clip
I'll let you guys know how it works out
Click to expand...
Click to collapse
Great! I have been seriously considering just getting the few tools and some materials and just making my own since it seems very hard to find ones that are well made. If I do I would basically have a thick, stiff leather back (I have a good sized piece of lace leather that I think would work well for that), a couple of belt loops either made from that same thick leather or a slightly thinner more flexible leather, then a soft leather for the rest of the holder with a flap for closing and probably just some cheap magnets hidden within for holding it closed. Should be pretty simple to put together (though there would likely be some trial and error involved).
thexder1 said:
I never used one of those, but every case or holder with a plastic clip I have had has broken within 3 months. I am not sure I want to spend that money on something that my experience indicates would probably not last very long.
I almost forgot that in previous experience I have had problems with clips like that causing the phone to fall every time I get out of my car and I noticed a few reviews mentioning that on that clip as well. Seems like a bit of a risk to me.
Click to expand...
Click to collapse
I only had it come out of the clip once and it was in the car. If you can, check it out in Best Buy. It really holds the phone well.
Hello Everyone,
New Note 4 user here, (yeah sounds strange upgrading from the note 3 finally, but samsungs gone full potato) and like any other purchase, the hunt for cases is on. I have scoured the internet/ebay/threads for possible solutions to my dilemma and haven't found anything, so I figure its a good time to ask. With my N3 I had the Seidio Dilex Extended battery case with the belt clip holster. This was an amazing combo and accounted for 99% of my needs, minus the stupid negative incline when the phone was flat on its back, due to the kickstand bulge.
Anyways, I am having a hell of a hard time finding extended battery cases that have a kickstand, or have the plastic belt clip holsters for that matter. Essentially it looks like its the Zerolemon and thats it for holster combos, or if I want an integrated kickstand, its the mugen, for outrageous pricing.
I had originally hoped that I'd be able to reuse the same case and such from my n3 with some modifications, since these two phones are very close in size. Well that got quickly abandoned, but there was still the possibility of using the seidio case and cover/holster since they appeared to be the same dimensions. Wrong again.
The sides of the case have much steeper angle coming out from the phone on the bottom and top, but could possibly be adjusted depending on how or if I can rework the holster.
and the top
I have found a temporary starting point to try and reclaim some of the utility I had with my N3 with a few random pieces from amazon.
Anker has been out of stock for a while, unless you want to pay scalper prices on ebay, so I figured I'd give Kranich a whirl for the $25 they asked for 6400mah battery and the plastic textured back panel.
Next I picked up a generic tpu honeycomb case (hopefully this is better than the plastic crap I had on my SIII) for $10 https://www.amazon.com/gp/product/B00S1581X4/ref=oh_aui_detailpage_o00_s01?ie=UTF8&psc=1
and lastly found a neat little gadget for another $10, a magnetic kickstand with adhesive. https://www.amazon.com/gp/product/B01HP15P60/ref=oh_aui_detailpage_o00_s01?ie=UTF8&psc=1
My plan should it go well, is to try and either cut a loop in the tpu case and secure the kickstand to the plastic backing itself, or to the tpu on the outside if thats not possible. Either way, ill make sure to correct the confusing mistake seidio made by putting the kickstand on the bottom of the phone and having it lay with the bottom of the phone slightly elevated instead of flat.
This should get me back to at least the core level of performance that the seidio case I had before offered, with a little less protection I think.
The last problem however, is the belt holster (or whatever you want to call it). Again, not many options, so I am looking at modifying my existing seidio holster to fit my N4 or possibly getting an otterbox holster and trying to work with that. You know, interestingly enough, I figured Alibaba would be swarming with weird stuff like that, and I really didn't see anything different
If anyone has any bright ideas, I'd love to hear it. Or for that matter any other cool suggestions for gear.
==============================Update #1==========================================
TPU case came in, god this stuff still sucks, and spigen kcikstand as well. After slipping my note 4 into something more sensual, I decided it was time to try out the holster, which I prayed to the case gods would still fit, and i-it d-d-does! Success! It does in deed definitely fit securely in the mount, albeit a it rides a little higher in the clip due to being ever so slightly longer that the note 3 with the seidio case (works for me still).
Far Away shot.
Damnit, point and shoots are picky when shoplights are involved.
Now that the first test was an overwhelming success, I decided it was time to make some cuts and drop the kickstand in, maybe risk some fingers or violate some safety rules. I decided to cut my way through the TPU case (while half listening to a linus tech tips webisode) and attach the kickstand directly to the phone case for more stability and a slightly smoother surface and a little more professional look. Results below:
First was to figure out where to put the case, I noticed that the first set of honeycombs was almost a perfect border for the ends of the kickstand and those served as an excellent guide for my first cuts.
To achieve a straight cut, i used a square razor blade and tapped it down through the tpu into an old notepad. this have a nice clean straight edge, id soon have to murder since it was nowhere near wide enough for accommodate the whole kickstand. A halfway picture would have been nice, but I was eager to finish.
If you do decide to copy this, make sure you cut the material, almost too tight for the kickstand, so it fits snugly, instead of stretching and leaving a gap like mine did. I would have liked to have rounded my edges a little better, but oh well, its not like I bought the phone to look at the back.
In any case(oh god not the puns), I think it worked out pretty well, but I think I'm gonna try and find a few more TPU cases, maybe that are a little spongier since this hardly gives any protection for drops. An added benefit is the lip of the kickstand in this spot serves as a nice rest for your fingers while using the phone.
I own and use the Thor Champagne Gold version of this one for more than 18 months now: https://www.amazon.com/Galaxy-Note-Verus-Charcoal-Black/dp/B00MHBSHYG
and am very happy with it. Have dropped the Note4 while bicycling, and from other stupid high positions on stone, it has saved my Note4 many a time. These verus cases rock!
So try that brand, I bet you they have what you need.
Switched from Hyperion 8000mah with honeycomb tpu, now using Verus Iron Shield with Spigen kickstand add on and purchased 3 extra batteries with external charger for $23 US from Amazon. I have leather holster, but front pocket works just fine.
jult said:
I own and use the Thor Champagne Gold version of this one for more than 18 months now: https://www.amazon.com/Galaxy-Note-Verus-Charcoal-Black/dp/B00MHBSHYG
and am very happy with it. Have dropped the Note4 while bicycling, and from other stupid high positions on stone, it has saved my Note4 many a time. These verus cases rock!
So try that brand, I bet you they have what you need.
Click to expand...
Click to collapse
That looks and sounds amazing, and reminds me of some of the drops my note 3 has taken and survived. This is what I really, really wanted to reproduce with my note 4, because, well it makes sense. Only problem is, I really want an extended battery since charging is much slower than my n3, and I don't want to rely on batteries.
tbvnz said:
Switched from Hyperion 8000mah with honeycomb tpu, now using Verus Iron Shield with Spigen kickstand add on and purchased 3 extra batteries with external charger for $23 US from Amazon. I have leather holster, but front pocket works just fine.
Click to expand...
Click to collapse
It looks goregeous, but I'm a little concerned about dampening shock, TPU doesn't seem to be the best at it..
If anyone is looking for a belt holster style carrying case, this is one that I got a few weeks back:
https://www.amazon.com/gp/product/B01H2K0M58/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
So far it's worked very well for me. I keep the Incipio Battery Pack on all the time on my phone and it fits just beautifully in this case. Just about the perfect size to easy in, easy out with the battery pack on it. Not very expensive either. The material is appears to be good quality.
I was even able to fit the phone with the JBL speaker mod on it in the case, though that was a tight fit.
There are two negatives worth noting:
1. It's big! Well, obviously it has to be cause it's a big (ie, tall) phone so it looks a little large on your hip. If having something big and heavyish on your hip is going to bug you, then don't get it.
2. I'm not thrilled with the clip... It's strong enough, but it doesn't hold as tightly as I'd like. This makes it easy to get the case on and off your belt... but a little too easy. A couple of times I've pulled the whole case off when just trying to get my phone out. And at least once when I was sitting in a deep couch for a while my normal movement while seated moved the case enough up the belt that when I stood up the case fell off my belt. (It's possible I just one a case with a belt clip that isn't as tight as it normally should be.)
Thanks for the review! Couple questions...
Is it long enough, that without a mod attached, the phone will fit with a case on it? In particular I was thinking of the bumper.
I work on trucks for a living. Having it slide off my belt would be annoying. Do the clips have enough space, that were I to glue them down, I'd be able to slide a belt through them?
Never mind, I see it has loops.
How well has it held up, since you've purchased it?
Just to let you know...the Incipio Performance Level 4 cases come with a holster as well. And they're not bulky like the OtterBox Defender series.
As a follow up, the AGOZ holster is great! At first I thought the clip was overkill, and contemplated removing it, but in unison with the loops, it firmly holds the holster where I want it. I use it all week long at work, since I work on trucks, and want the most protection possible, without the Otterbox bulk in hand.
I did look at the Incipio holster, but it looked awkward used in the horizontal position. I did purchase their bumper, which I love. On weekends, I use the Seidio Dilex Pro holster for the Galaxy Note 5, recommended on another forum. It's a perfect holster in combination with the bumper, and allows for any mod to be used.
I just want a simple clip holster that works with the back panel that came with the phone. No bumper, no case... Just a belt clip.
No where to be found.
I use this sometimes. Works fine with the style shell or Incipio battery pack. It has a nice sturdy metal clip that allows the case to rotate.
Turtleback Vertical Ballistic Nylon Holster Pouch Extended - Fits Samsung Galaxy S5 with Otterbox - Metal Belt Clip - Magnetic Flap Closure - Made in https://www.amazon.com/dp/B00KO8LFPM/ref=cm_sw_r_cp_apap_oCoqdZ6G7QI1N
Sent from my XT1650 using Tapatalk
I bought this 3 years ago. It will fit any phone, phone/mod out there. I got tired of snapping off the otterbox holster clips getting in and out of the car.
https://www.amazon.com/gp/product/B001DZPBXM/ref=oh_aui_detailpage_o04_s01?ie=UTF8&psc=1