Related
Hi all,
8" chinese ROCO 2GB/16GB white 2 speakers on the back. Base rom was android 6
1 - Device was bricked due to bad firmware. No backup, no stock ROM (yes still exist this kind of people).
2- Found rom on needrom for Roco C805 (https://www.needrom.com/download/roco-c805/). V6 doesn't flash. V11 has a corrupt file.
3 - downloaded ten's of rom for every MT8163, read hundreds of forums (yes, I don't like to bother). Always an error when flashing due to load (yes boot loader was gone)
4 - Found rom for Philips e1027 (https://www.needrom.com/download/philips-e1027/). Flashed ok! No sound on speakers. This version is Android 7.
5 - made a few changes using bootloader from e1027 + remaining files from V6 (see 2-)
6 - Have a flashable rom with preloader ok + remaining files ok + items.ini file cleaned and adapted to screen resolution (8" 1280x800). Still no sound
So i read that maybe I should use libaudio*.so files from Android 6 and copy to this ROM. But I don't have the original android 6 rom copy from.
Also read that Alsa Mixer could fix it but I'm not being able to root with common tools such as android tools, etc.
This is the device from my young daughter and I've run out of ideas of how to fix the audio issue.
I've some programming background ... all the help I can get is appreciated.
regards
Any news regarding this? I have this tablet but it is still on android 5. I would like to update and root it if possible
You can upload this file C805.N.V1.8.RC-V11.rar ???
Thanks!
This is an EMUI 5.0 camera app port for other UI/phone.
This port is inspired by the EMUI 3.1 camera port:https://forum.xda-developers.com/honor-5x/themes/port-emui-4-0-roms-t3429894
(Thanks to @gopinaidu77)
Working: everything except system-related(no Huawei Gallery, off screen quick snap)
Most advanced features are not available on non-huawei phones.
Download:https://mega.nz/#!5j4D1STS!iI5GnfNeJOJNuo1u3TBH0I0OomfiYMouUQhLUMYl40I
@fxsheep Thanks for the port. I can install it successfully in HTC 10. However, the maximum pic solution is just 8M while it should be 12M for HTC 10. Can you fix it?
quantan said:
@fxsheep Thanks for the port. I can install it successfully in HTC 10. However, the maximum pic solution is just 8M while it should be 12M for HTC 10. Can you fix it?
Click to expand...
Click to collapse
That's a known problem -- without EMUI some features and configuration can't be load correctly
fxsheep said:
This is an EMUI 5.0 camera app port for other UI/phone.
This port is inspired by the EMUI 3.1 camera port:https://forum.xda-developers.com/honor-5x/themes/port-emui-4-0-roms-t3429894
(Thanks to @gopinaidu77)
Working: everything except system-related(no Huawei Gallery, off screen quick snap)
Most advanced features are not available on non-huawei phones.
Download:https://mega.nz/#!5j4D1STS!iI5GnfNeJOJNuo1u3TBH0I0OomfiYMouUQhLUMYl40I
Click to expand...
Click to collapse
Download link not working. Please mirror this link.
@fxsheep i am trying to install apk on honor 5x itself on 16.1 microg variant. But it is throwing error. Should I give you logcat
I would like to learn how to port EMUI 8 camera for any other OEM to Magisk module.
Stock version is 8.0.0.201. Should work for Nougat 7.0 till Pie 9.0
Minimal files from stock rom are in folders: cameraplugins and priv-app/HwCamera2 from /system are here.
Warning - this will overwrite your system files and make your system bootloop - DO NOT flash it via recovery.
Full TWRP backup of camera app with emui, permissions, frameworks, libs folders is here.
Latest version that works on EMUI 8 is 9-0-0-104 @ ApkMirror. Also should works on 7.0 till 9.0
I have searched everywhere but still no luck.
I have a xioami mi8 running on lineage os 16 (all details at bottom of post). I installed the reccomended xioami os then installed the lineage os and installed dm-verity to remove the encryption that automatically happens on the device after a ROM change. Installed magdisk and everything is all good a working. Was then trying to do a full disk encryption as I feel safer with my phone being encrypted. But... Everytime I encrypt the following happens .
1. encrypt phone via setting
2. Green android screen shows up to say it's encrypting for a second or two.
3. Phone restarts.
4. Loads xioami boot icon
5. Lineage os boot logo appear but it never gets passed the loading icon that lineage has.
6.have left it for well over ten hours and no change.
7. Have to force restart then have to reflash everything back to how it was before.
Have looked all over online for solutions ranging from changing settings in the vendor files ("encryption = ice" to "fileencryption = ice) as well as using someones zip I found online file to try fix the file errors by installing via twpr. No luck still. Have messed about with magdisk preserve force encrypt checkbox etc still with no luck. Have tried with and with roots and magdisk and various other ways.
Seems other people have this issue but still have had no luck fixing it or the forum seems to stray from the topic.
Any help is much appreciated and will offer a cash reward for a fix (£50) to anyones bank account who can help.
Android version 9
Lineage is version
16.0-20181213-unofficial-dipper
Kernal version
4.9-112-perf-g9472b2d4dac2
Build number
Lineage_dipper_userdebug 9 pq1a 181205.006 b1ead5321b test-keys
Phone
Xioami mi8 128gb
olliemarsallo said:
I have searched everywhere but still no luck. I have a xioami mi8.........
Click to expand...
Click to collapse
I don't have this device but, your best bet is to post this question within one of the following threads that's specific to your device for support and guidance.
Q&A thread:
https://forum.xda-developers.com/showthread.php?t=3799955
LineageOS 16.0 thread:
https://forum.xda-developers.com/showthread.php?t=3845218
Good Luck!
~~~~~~~~~~~~~~~
UNLESS asked to do so, PLEASE don't PM me regarding support. Sent using The ClaRetoX Forum App on my Commodore VIC-20.
Now that the Umidigi One Max has TWRP, it is now very easy to flash GSI ROMs.
I will try to keep track of different GSI that works (or not !) here, alongside with bugs. Testers are welcome !
I highly recommend GSI based off phhhuson's work, as he did great job to fix MTK issues. Some other GSI may work better. We definitely need testing !
10
Apparently it works as shown here: https://forum.xda-developers.com/showpost.php?p=80319007&postcount=13 credits to @4ctiv_
9.0 Pie
phhusson's AOSP :
Everything works as expected. Notification bar is of the wrong size, may need to create a patch for it. Tethering doesn't work with data ON !
Camera is good ! All cameras are recognized. Fingerprint sensor OK. Torch not working under 15% like in stock, this seems like a hardware thing.
Ongoing calls and SMS will not work first boot. Just reboot and it'll work.
Magisk 19+ doesn't show root prompts. Fix here
Pixel Launcher crashes, but it seems that it's the only google app that doesn't work. Google Phone works.
NFC doesn't appear at all. There is a fix with magisk tho ! See here (NFC4PRA)
ctsProfile doesn't pass. Using MagiskHidePropsConfig fixes the issue, but choosing "vendor fingerprint" bootloops
Testers needed
8.1 Oreo
Testers needed
Do not hesitate to post what you find or your testing.
NOTE : Installing a GSI can be done via 3 methods : TWRP Image Flash, SP Flash Tool, or fastboot (needs unlocked bootloader)
For the first two methods, unlocked bootloader is not required ! TWRP can be flashed via SPFT aswell.
Enjoy your beautiful and modded phone
Make sure to check out my guide on installing GSIs at https://forum.xda-developers.com/android/development/umidigi-one-max-custom-rom-modding-t3942521/
I downloaded system-arm64-ab-gapps-su.xz, extracted the file, booted into TWRP, did a full wipe, and installed "image" system-arm64-ab-gapps-su.img. TWRP asks which partition to install it to. I selected "system". However, after install I go to reboot, and TWRP complains there is no OS. Am I missing something?
I did a complete backup in TWRP of all important partitions first (nvram, modem, system Etc.), so going back to my stock setup was not difficult. Those trying this, backup all important partitions from TWRP on to microsd!
For everyone, make sure you download AONLY images, not AB !
_cab13_ said:
Now that the Umidigi One Max has TWRP, it is now very easy to flash GSI ROMs.
I will try to keep track of different GSI that works (or not !) here, alongside with bugs. Testers are welcome !
I highly recommend GSI based off phhhuson's work, as he did great job to fix MTK issues. Some other GSI may work better. We definitely need testing !
10 Q Beta
Beta 4 : Probably not working, as our device is not system-as-root (but is VNDK isolation compatible)
Still needs testing
9.0 Pie
phhusson's AOSP :
Everything works as expected. Notification bar is of the wrong size, may need to create a patch for it. Wifi access point doesn't work.
Camera is good ! All cameras are recognized. Fingerprint sensor OK. Torch not working under 15% like in stock, this seems like a hardware thing.
Ongoing calls and SMS will not work first boot. Just reboot and it'll work.
Magisk 19+ doesn't show root prompts. Fix here
Pixel Launcher crashes, but it seems that it's the only google app that doesn't work. Google Phone works.
ctsProfile doesn't pass. Using MagiskHidePropsConfig fixes the issue, but choosing "vendor fingerprint" bootloops
Testers needed
8.1 Oreo
Testers needed
Do not hesitate to post what you find or your testing.
NOTE : Installing a GSI can be done via 3 methods : TWRP Image Flash, SP Flash Tool, or fastboot (needs unlocked bootloader)
For the first two methods, unlocked bootloader is not required ! TWRP can be flashed via SPFT aswell.
Enjoy your beautiful and modded phone
Click to expand...
Click to collapse
I posted this in another forum, but for the life of me I do not know what is causing this issue. I installed RR rom located here:
https://get.resurrectionremix.com/?dir=gsi/
system-190120-arm64-aonly-vanilla-nosu.img
I also install, Gapps (pico), and Magisk.
It runs great, for the most part. However, if I start streaming a video from any app or start streaming music, after a short amount of time my Umidigi One Max:
A.) Announces, "Powering Down"
B.) Boots directly into TWRP
C.) If I reboot, it again boots directly into recovery. Almost as if the partition became corrupted.
D.) Try to recover a backup I made in twrp, reboot, again boots straight into recovery.
E.) If SP Flash can communicate with the phone, I can usually push all the stock images back to the phone. If not, I have to push the images via fastboot with my Ubuntu PC.
If I do any other CPU intensive task under a GSI ROM, it doesn't have this issue, only when I stream video. I haven't tried any games to see if it causes this behavior.
I have tried multiple GSI Roms located here too, same problem:
https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list
I do not believe the device is overheating, it's usually around 32-34C from the TWRP menu at that point. I really like the RR Rom, but if I cannot figure out what is causing this, I'll have to stray away from GSI for now.
As a sidenote, this issue of the device suddenly powering down after starting to stream a video, does not happen with the stock ROM. I am kind of at a loss on this one.
Weirdest thing I have experienced running a custom ROM.
Yeah it happened to me sometimes as well... The phone goes straight into recovery and then never goes to system again. I haven't found the cause of it.
Did you try the NFC fix for the one pro (I got it from the umdigi forum one Pro and then the thread custom ROMs)
phhusson's AOSP is mostly good. But I noticed the wifi often gets disconnected and has performance issue too.
w1lh3lm3d said:
Did you try the NFC fix for the one pro (I got it from the umdigi forum one Pro and then the thread custom ROMs)
Click to expand...
Click to collapse
I posted a fix that works. Here it is if you didn't see : https://forum.xda-developers.com/p8...pment/flashable-nfc-kirin655-devices-t3811916
tomprc said:
phhusson's AOSP is mostly good. But I noticed the wifi often gets disconnected and has performance issue too.
Click to expand...
Click to collapse
I don't get any performance issue. The only issues is that some ongoing calls doesn't come, and sometimes 4G totally glitches out. Other than that it's pretty much all.
@ _cab13_
i cant find the vendor folder in twrp in the mount section or in the file manager.
what have i done wrong? ok i started from scratch and then it worked porfectly
thx you for your work and help
Engineering mode access or work around
On the 9.0 ROM I cant seem to access engineering mode via the keypad, I need to sort the handset speaker out. Is there any other way to access it or some way of tweaking the voice settings through the shell?
Any help would be appreciated.
Please help
I'm trying to get the new phh Android q to boot and and I'm a newbiew
Just booted from Android 10 GSI 200 c. by PhhTrebble without any problems (flashed latest stock before). Just to let you guys know Will update bugs and working stuff tomorrow.
[Update]
Missing features
_________________
NFC missing and magisk patch did not work for me
Media playback in for exampel youtube/instagramm/reddit etc. not working in apps but in browser it workes.
Bugs:
_________________
Sometimes apps crash
SD-card "has to be formated to use" // I did not try formating yet
Sometimes Youtube playback fixes itself if you tab out and go back to the video or if you open the help page of YT (top right corner question mark symbol) and go back to the video
Be aware that the 200.c phh gsi i used is still in development but as you can see it is totally capable to use as daily driver
[UPDATE 2]
- Missing features is still NFC
- In PHHSolution "AOSP 10.0 v211" mediaplayback got fixed (Tested with "system-quack-arm64-aonly-gapps.img.xz" )
On Phh's 9 v119 Is the headphone jack sensor working for anyone. (If so how)
4ctiv_ said:
Just booted from Android 10 GSI 200 c. by PhhTrebble without any problems (flashed latest stock before). Just to let you guys know Will update bugs and working stuff tomorrow.
[Update]
Missing features
_________________
NFC missing and magisk patch did not work for me
Media playback in for exampel youtube/instagramm/reddit etc. not working in apps but in browser it workes.
Bugs:
_________________
Sometimes apps crash
SD-card "has to be formated to use" // I did not try formating yet
Sometimes Youtube playback fixes itself if you tab out and go back to the video or if you open the help page of YT (top right corner question mark symbol) and go back to the video
Be aware that the 200.c phh gsi i used is still in development but as you can see it is totally capable to use as daily driver
Click to expand...
Click to collapse
did you use the a only or ab image?
I've tried flashing multiple android 10 GSIs from the phhusson GSI wiki list.
I've tried phhusson's AOSP ROM, CAOS, Lineage 17.1 and POSP. It seems like they all freeze at the splash screen and get stuck loading forever (confirmed, I left it on all night last night). I've tried disabling force encryption, I've tried not installing magisk. Not really sure where to go from here with Android 10.
I've also tried Android 9 with much more success: it boots, it works, but the only thing I can't seem to get is NFC. Has anyone found a way to get NFC to work on any android version with this device? Or do I have to go back to stock android 8?
Thanks!
seiyria said:
I've tried flashing multiple android 10 GSIs from the phhusson GSI wiki list.
I've tried phhusson's AOSP ROM, CAOS, Lineage 17.1 and POSP. It seems like they all freeze at the splash screen and get stuck loading forever (confirmed, I left it on all night last night). I've tried disabling force encryption, I've tried not installing magisk. Not really sure where to go from here with Android 10.
I've also tried Android 9 with much more success: it boots, it works, but the only thing I can't seem to get is NFC. Has anyone found a way to get NFC to work on any android version with this device? Or do I have to go back to stock android 8?
Thanks!
Click to expand...
Click to collapse
I'm in the same boat bro. I've just tried both the latest phhusson AOSP 10 ROM as well as an older version of the same ROM, and both time I get caught in a loop after install. Completely wiped beforehand, tried installing with and without Magisk/Disable-Force-Encryption. Going to have to bring it back down to Android 9. I wonder how 4ctiv_ got it working?
so first you have to no encryption then erase and format data
flash android 10 arm 64 a without gapps build (image) to system i use havoc 3.5 and everything exept nfc works
then install gapps (it failed for me so i had to resize system in twrp and install gapps again
last step is to flash the custom phhson magisk
then just reboot wihout wipping
Thank you so much for your work...
Hi, I'm a long time Android user and I used to code apps, if I can be of any help please let me know but I'm now disabled wheel chair user with dystonia so I find it extremely difficult to type now so I use voice to text... I really enjoy using the umidigi one max it has the storage and usability of a much more expensive phone, also functionally for me the wireless charging and NFC make my life so much easier as I find cables akward and payments at shops much easier.
I read about the Treble programmea while ago and recently read this article and if it is possible to get the NFC working on this update, I will be so greatful as it will extend the life of this great phone for me.
Good luck with your work and thank you in advance.
4ctiv_ said:
Just booted from Android 10 GSI 200 c. by PhhTrebble without any problems (flashed latest stock before). Just to let you guys know Will update bugs and working stuff tomorrow.
[Update]
Missing features
_________________
NFC missing and magisk patch did not work for me
Media playback in for exampel youtube/instagramm/reddit etc. not working in apps but in browser it workes.
Bugs:
_________________
Sometimes apps crash
SD-card "has to be formated to use" // I did not try formating yet
Sometimes Youtube playback fixes itself if you tab out and go back to the video or if you open the help page of YT (top right corner question mark symbol) and go back to the video
Be aware that the 200.c phh gsi i used is still in development but as you can see it is totally capable to use as daily driver
[UPDATE 2]
- Missing features is still NFC
- In PHHSolution "AOSP 10.0 v211" mediaplayback got fixed (Tested with "system-quack-arm64-aonly-gapps.img.xz" )
Click to expand...
Click to collapse
Hello, Do you know a custom rom compatible with the Box T9 RK3318 ? The stock rom is too ... Stock ^^ Thank you in advance.
searching too ;-)
I found a Android 9 Stock rom for the T9 64GB 4GB ram version of this box. Best way to upgrade it is by using a SDcard formatted in Fat32 and use the SD card using SD_Firmware_Tool_v146_eng_AndroidPC.zip and the firmware file name is 3318_9.0-TVBOX-Z2_0820.img Make the SD card with the program. Insert the SD card while the box has no power. Hold the button inside the AV port while holding it in. Plug in the power. Then release the button when you see the T9 boot logo come up and it will automatically program the TV box to version 9. The only issue I had was with playstore would not install the apps. But if you install them manually it would update them or using a phone or computer and pick what you want from playstore works it will download and install from there when you select the TV box. Also it will not connect to WIFI while plugged into Ethernet where as the 8.1 allowed both Ethernet and WIFI to be connected at the same time. I am currently searching for the Android 10 version.
Update:
This file is more updated. 3318_9.0-TVBOX-Z4_1025.img Then once its installed run the updater to get the next update to have the latest 9.0 installed.
flood404 said:
I found a Android 9 Stock rom for the T9 64GB 4GB ram version of this box. Best way to upgrade it is by using a SDcard formatted in Fat32 and use the SD card using SD_Firmware_Tool_v146_eng_AndroidPC.zip and the firmware file name is 3318_9.0-TVBOX-Z2_0820.img Make the SD card with the program. Insert the SD card while the box has no power. Hold the button inside the AV port while holding it in. Plug in the power. Then release the button when you see the T9 boot logo come up and it will automatically program the TV box to version 9. The only issue I had was with playstore would not install the apps. But if you install them manually it would update them or using a phone or computer and pick what you want from playstore works it will download and install from there when you select the TV box. Also it will not connect to WIFI while plugged into Ethernet where as the 8.1 allowed both Ethernet and WIFI to be connected at the same time. I am currently searching for the Android 10 version.
Update:
This file is more updated. 3318_9.0-TVBOX-Z4_1025.img Then once its installed run the updater to get the next update to have the latest 9.0 installed.
Click to expand...
Click to collapse
hello, sorry for my English I live in France I would have a question about the box: TV T9 RK3318, 4gb / 64gb. the problem is that the time is desynchronized on restart and creates problems to connect to applications when the time is out of order, I tried everything changed the time zone to deactivate and entered the time Manual it goes out of order all the time . is there a custom version or a version 10?
As far as I know there is no Android 10 available for this TV box. If you want Android 10 time to buy a different Box other than a rockchip based one. As for the time resetting whenever the box is restarted this is normal it only resync when it connects to a time server on the internet. Not sure how you go about fixing that. There is no internal battery to keep time on it like a other devices would have.
Android 10 GSI ? Since the T9 was released on Android 9 and hence Treble compatible
yes no custom rom no Android 10, for now, even with an internal wifi connection sometimes she does not want to synchronize
Hello,
Before going further with this, if you wish to test those firmwares go ahead but you are the only responsible for your acts
I don't want any credits it's just to help ppl out, I was just testing the device myself.
I was also looking for a custom rom for the T9 Rk3318 but couldn't find one (in the box it was mentioned 3318 but when I opened the device in the mainboard it was saying rk3328 :/ )
I flashed some firmwares that I found (not custom) and finally bricked the box.
Then I did the testpoint and recovered it with two firmwares that I found in the link below that seems to be very compatible, all the credits goes to the owner.
https://cloud.mail.ru/public/PqyA/6YkwGagu9/ANDROID 10/
A95XR5_RK3318_Android10_2020-07-10 -- is working great
The one below I found it a bit slower but it also works
RK3318_DC_R1_AP6330_10_20200707.0137working
What doesn't work:
- original remote control
- display leds
...you can tell
You need a tool to flash them
-Rockship factory Tool
-Usb male to usb male cable (you can also find some videos on youtube to make one yourself)
you can find some instructions how to flash here:
Regards
li70 said:
Hello,
...............
Regards
Click to expand...
Click to collapse
This post helped me a lot, didn't have to search aimlessly and after flashing the a95xr5 rom its way better than the Z5 one the tvbox had before. It's still slow but man, compared to the old ROM its usable and not so damn sluggish. Thanks for taking the time to post this.
caxhatq said:
This post helped me a lot, didn't have to search aimlessly and after flashing the a95xr5 rom its way better than the Z5 one the tvbox had before. It's still slow but man, compared to the old ROM its usable and not so damn sluggish. Thanks for taking the time to post this.
Click to expand...
Click to collapse
Yeah that looks identical to my tv box board. The firmware will work that I posted a link to works.
flood404 said:
Yeah that looks identical to my tv box board. The firmware will work that I posted a link to works.
Click to expand...
Click to collapse
I've found an Android 11 ROM for this box, works amazingly well compared to the A95X and the sluggish T9 Z5 ROM. Here is a link to it:
RK3318_DC_HK1_COOL_AP6330_11_20210522.1453.zip
drive.google.com
WIFI works, only the front panel and infrared remote does not work. By the way, I flashed this ROM with an SD card because the USB cable I made was wonky and stopped flashing midway causing the box to not boot at all. It's simple, download the tool I've attached to this post and use it to either flash or just boot the img if you don't wanna flash it to eMMC (Haven't tested the SD Boot function myself but it should work)
This website also helped me a ton: https://forum.armbian.com/topic/17597-csc-armbian-for-rk3318rk3328-tv-box-boards/
caxhatq said:
I've found an Android 11 ROM for this box, works amazingly well compared to the A95X and the sluggish T9 Z5 ROM. Here is a link to it:
RK3318_DC_HK1_COOL_AP6330_11_20210522.1453.zip
drive.google.com
WIFI works, only the front panel and infrared remote does not work. By the way, I flashed this ROM with an SD card because the USB cable I made was wonky and stopped flashing midway causing the box to not boot at all. It's simple, download the tool I've attached to this post and use it to either flash or just boot the img if you don't wanna flash it to eMMC (Haven't tested the SD Boot function myself but it should work)
This website also helped me a ton: https://forum.armbian.com/topic/17597-csc-armbian-for-rk3318rk3328-tv-box-boards/
Click to expand...
Click to collapse
It says this is Android 9.0 here. https://romprovider.com/soudamini-hk1-cool-firmware-support/
Hi,
I know it's an old thread but i'm try'n to revive this box without success.
On board it's written 2G/16B tried 3318_9.0-TVBOX-Z4_1025.img firmware but restoration give me errors (see screenshot) would like to try 3318_9.0-TVBOX-Z2_0820.img firmware but didn't find it so if someone somewhere had this deep in his storage,please upload it again,it would be helpfull.
Regards
Hi i have used so many hours on this. If someone is interessted in recover this device back to stock firmware, here it is:
All the usefull links i have used:
Rockchip firmware update guide for Android TV-Box 2023
Tutorial to update, recover or unbrick with a firmware file our Android TV Box with SoC Rockchip RK3188, RK3368, RK3228, RK3229, RK3566...
androidpctv.com
Introduction — Firefly Wiki
RK3328-based firefly open source motherboard, has very powerful performance, USES a quad-core 64-bit processor Rochchip RK3328, and integrates 2.4g WIFI and bluetooth 4.2 module on the tiny motherboard, with usb2.0, usb3.0, hdmi, 1000M Ethernet, i2s and other diverse interfaces.
wiki.t-firefly.com
I have successfully restored my device back to Android 9.0. Using Driverassist 4.7 and RKdevTool v.2.58.
If anyone knows how to update the device to android 10 or higher WITHOUT bricking the device or some functions not working so please tell me.
Remember to give the device some time to startup after the firmware downloaded successfully.
caxhatq said:
I've found an Android 11 ROM for this box, works amazingly well compared to the A95X and the sluggish T9 Z5 ROM. Here is a link to it:
RK3318_DC_HK1_COOL_AP6330_11_20210522.1453.zip
drive.google.com
WIFI works, only the front panel and infrared remote does not work. By the way, I flashed this ROM with an SD card because the USB cable I made was wonky and stopped flashing midway causing the box to not boot at all. It's simple, download the tool I've attached to this post and use it to either flash or just boot the img if you don't wanna flash it to eMMC (Haven't tested the SD Boot function myself but it should work)
This website also helped me a ton: https://forum.armbian.com/topic/17597-csc-armbian-for-rk3318rk3328-tv-box-boards/
Click to expand...
Click to collapse
works perfectly I used still using the same Rom about months ago