Related
Hi All,
I have a stock TF300T with latest ASUS firmware (4.2.1) and it started throwing this error code the other day. I found it in an off state and when I try to start it, it says
Failed to initialize aboot
Unrecoverable boot loader error (0x37042000).
I did some searching for info on this error code to see what the deal might be but I couldn't really find anything. I also tried doing the Power On + Volume down to recover but all it will do is show this error code. I currently have an open RMA to send it back to ASUS, but I would really rather not waste the money/time shipping it back to them if I can somehow fix it myself. Does anyone have any insight into this error and how I can fix the problem?
Thanks in advance.
What have you done with your tablet? Did you try install recovery, system etc. that your tablet says "unrecoverable boot loader error"?
Hazard17 said:
What have you done with your tablet? Did you try install recovery, system etc. that your tablet says "unrecoverable boot loader error"?
Click to expand...
Click to collapse
Nothing at all. It is 100% stock. The only thing related to firmware I can think of that might have caused this in the last week is that it said it had a camera update available but it seemed to fail on reboot. I didn't really pay attention to it because I haven't used the camera much and it didn't affect what I do with the tablet.
Well...off to ASUS warranty service to see what the problem is. I'll post back any useful info I get for this bootloader error.
I have a razr hd. I can boot into ap fastboot but thats it. Anything else it sits on red m logo. Cant boot into recovery or anything. I can flash xml using one of matts utility without any fails but rebooting just sits on red m.Please help.
meat-rack said:
I have a razr hd. I can boot into ap fastboot but thats it. Anything else it sits on red m logo. Cant boot into recovery or anything. I can flash xml using one of matts utility without any fails but rebooting just sits on red m.Please help.
Click to expand...
Click to collapse
we are going to need a bit more information to possibly help you.
what did you do to get into this predicament?
are you locked or unlocked?
if locked, what was your system version prior to the issue?
bweN diorD said:
we are going to need a bit more information to possibly help you.
what did you do to get into this predicament?
are you locked or unlocked?
if locked, what was your system version prior to the issue?
Click to expand...
Click to collapse
Same issue for me after OTA. Just processed the OTA as normal and phone will not climb out of the Red M loop. Non rooted, locked device. Attempted to utilize RSD with a few flash files and no luck. Very inexperienced with this. Sorry to be so dense, just looking for any direction possible.
Slickville said:
Same issue for me after OTA. Just processed the OTA as normal and phone will not climb out of the Red M loop. Non rooted, locked device. Attempted to utilize RSD with a few flash files and no luck. Very inexperienced with this. Sorry to be so dense, just looking for any direction possible.
Click to expand...
Click to collapse
i wish i could help you but without knowing exactly what the ota flashed before failing, any advice i give has the real possibility of making your phone worse or possibly perma bricked. the problem is you are locked and we dont yet have a fxz for kk.
that being said, if you still want to try and fix it against my advice i will tell you what to try but I AM NOT RESPONSIBLE IF THIS BRICKS YOUR PHONE OR MAKES IT WORSE IN ANY WAY.
download this xml file http://www.mediafire.com/view/p217akcxwmijcr7/VZW_XT926_4.1.2_9.8.1Q_62_VQW_MR-2_VQW_CFC_DOWN.xml
download the 9.30.1 ota from sbf droid devs
extract it to a folder and DELETE the xml file, then copy the one above into the folder
make sure you have the latest rsd, i think its 6.1.5 (not positive)
load the xml file into rsd and flash as usual
if this does not work, there is no way to fix your phone until the kk fxz is leaked, assuming this doesnt make it worse.
6.1.6 is the newest RSDLite I've seen.
Go here if you haven't applied the OTA yet and your bootloader is locked.
http://www.droidrzr.com/index.php/topic/45494-how-to-xt926-upgrade-to-kitkat-ota/
If you have applied the OTA and you're locked, don't do it. You'll have to wait for the FXZ to come out. Otherwise, it will brick even further.
If you have applied the OTA AND your bootloader is UNLOCKED, then you can use the tool to flash back to stock 9.30.1.
I too am bricked. unrooted and locked. Ran the ota and when it reset, it now hangs at the red M. Can get into fast boot and recovery. Tried factory restore and wipe cache. Once I did that my phone now randomly boots to andy all opened up, waiting for me to press the buttons to go into recovery. If I leave it like that, it just reboots after a time and does it all over again . I'm going to assume the only way forward is the xfz file? Any body have an idea of when that might become available and where about I can pick it up? I.E. which forum might have it and will it be a new thread?
Grimaldus3320 said:
I too am bricked. unrooted and locked. Ran the ota and when it reset, it now hangs at the red M. Can get into fast boot and recovery. Tried factory restore and wipe cache. Once I did that my phone now randomly boots to andy all opened up, waiting for me to press the buttons to go into recovery. If I leave it like that, it just reboots after a time and does it all over again . I'm going to assume the only way forward is the xfz file? Any body have an idea of when that might become available and where about I can pick it up? I.E. which forum might have it and will it be a new thread?
Click to expand...
Click to collapse
This has been posted many times. When installing the OTA manually via recovery, a few things happen:
The first time you apply the OTA in recovery, it replaces the recovery with a new recovery and reboots the phone. This new recovery requires a new key combo to get into it. The new key combo is vol-up + power.
So, after you attempt to apply the OTA the first time, you need to be around so when it reboots into the Andy screen, you can use the new key combo. Otherwise, if you leave it alone, it will reboot and then you'll see the red Moto logo which means you'll have to reboot the phone and then hold vol-up + power to get the boot menu and select "Recovery" and then go to the next step.
After getting back into the new recovery, you must apply the OTA again so it can continue to upgrade your phone. After this, you'll be upgraded to Kit Kit.
iBolski said:
This has been posted many times. When installing the OTA manually via recovery, a few things happen:
The first time you apply the OTA in recovery, it replaces the recovery with a new recovery and reboots the phone. This new recovery requires a new key combo to get into it. The new key combo is vol-up + power.
So, after you attempt to apply the OTA the first time, you need to be around so when it reboots into the Andy screen, you can use the new key combo. Otherwise, if you leave it alone, it will reboot and then you'll see the red Moto logo which means you'll have to reboot the phone and then hold vol-up + power to get the boot menu and select "Recovery" and then go to the next step.
After getting back into the new recovery, you must apply the OTA again so it can continue to upgrade your phone. After this, you'll be upgraded to Kit Kit.
Click to expand...
Click to collapse
Right. By reading your earlier posts instructions I got into recovery. That is how I was able to factory reset and wipe cache. I'm talking about AFTER I did all that, instead of just being hung at red m screen, it hangs for a few seconds, then flickers, hangs a few more seconds, and then goes into andy screen. If I don't touch it for a few minutes, it reboots, and that same process starts over, ending with the andy screen again...Its like it WANTS me to be in recovery to fix it .
I noticed you also said to others that us lot are pretty much screwed until the fxz file is out, which I assume is this OTA as a zip so we can flash with recovery? Any idea when that will be coming out? and where should I look for it once its out?
Heck, because I was unrooted and locked and it was the official OTA from verizon, maybe I should go in to them and demand they replace my phone with the moto x. Though, I rather liked my razr hd and don't quite wanna give up on it...
Grimaldus3320 said:
Right. By reading your earlier posts instructions I got into recovery. That is how I was able to factory reset and wipe cache. I'm talking about AFTER I did all that, instead of just being hung at red m screen, it hangs for a few seconds, then flickers, hangs a few more seconds, and then goes into andy screen. If I don't touch it for a few minutes, it reboots, and that same process starts over, ending with the andy screen again...Its like it WANTS me to be in recovery to fix it .
I noticed you also said to others that us lot are pretty much screwed until the fxz file is out, which I assume is this OTA as a zip so we can flash with recovery? Any idea when that will be coming out? and where should I look for it once its out?
Heck, because I was unrooted and locked and it was the official OTA from verizon, maybe I should go in to them and demand they replace my phone with the moto x. Though, I rather liked my razr hd and don't quite wanna give up on it...
Click to expand...
Click to collapse
No, the FXZ is the full kit-kat image, not an update like the OTA. The FXZ can be used to flash your phone back to full stock, whether you are locked or not. If you are locked, then you can only flash the version that is currently on your phone or newer. You cannot flash back to a previous version unless your bootloader is unlocked.
The ota is used to only update a previous version to the current version, in this case from JB to KK, but once it's applied, you cannot apply it again since you are already upgraded to that version. It's only an upgrade, not a full image like an FXZ.
iBolski said:
No, the FXZ is the full kit-kat image, not an update like the OTA. The FXZ can be used to flash your phone back to full stock, whether you are locked or not. If you are locked, then you can only flash the version that is currently on your phone or newer. You cannot flash back to a previous version unless your bootloader is unlocked.
The ota is used to only update a previous version to the current version, in this case from JB to KK, but once it's applied, you cannot apply it again since you are already upgraded to that version. It's only an upgrade, not a full image like an FXZ.
Click to expand...
Click to collapse
I see, makes sense. Every days a school day I suppose. Thanks for the info. Guess I have to decide to either wait for the FXZ or go to verizon and see if they can get me a new phone.
Same thing happened to my wife, completely stock now stuck at red m. After calling verizon they suggested the factory reset which just gives you a boot to dead android guy to get into recovery on every boot. Then after a couple minutes just reboots and does the same thing, stuck in a loop. They then said it's not their software, rather Motorola's, so Verizon's only recourse is to sell me an overpriced refurb or upgrade to the edge plan. Screw them. I said unacceptable and they gave me a number for Motorola. Moto said that they put in a request to extend my factory warranty because it was the software update that caused the issue and they will let me know tomorrow. I understand stuff happens, but this is not acceptable when their harassing update causes thee issue. I knew I should've unlocked the boot loader on it when I had the chance.
al2fast said:
Same thing happened to my wife, completely stock now stuck at red m. After calling verizon they suggested the factory reset which just gives you a boot to dead android guy to get into recovery on every boot. Then after a couple minutes just reboots and does the same thing, stuck in a loop. They then said it's not their software, rather Motorola's, so Verizon's only recourse is to sell me an overpriced refurb or upgrade to the edge plan. Screw them. I said unacceptable and they gave me a number for Motorola. Moto said that they put in a request to extend my factory warranty because it was the software update that caused the issue and they will let me know tomorrow. I understand stuff happens, but this is not acceptable when their harassing update causes thee issue. I knew I should've unlocked the boot loader on it when I had the chance.
Click to expand...
Click to collapse
Then you're almost there. At the "dead android" screen, press and hold vol up and then press power and then release both buttons. This gets you into recovery.
At this point, reinstall the OTA via the recovery so it can start into the 2nd stage and then you'll be done.
iBolski said:
Then you're almost there. At the "dead android" screen, press and hold vol up and then press power and then release both buttons. This gets you into recovery.
At this point, reinstall the OTA via the recovery so it can start into the 2nd stage and then you'll be done.
Click to expand...
Click to collapse
I don't know how to reinstall the OTA via stock recovery. I tried it do the install update.zip option and nothing happened. Any pointers would be appreciated.
al2fast said:
I don't know how to reinstall the OTA via stock recovery. I tried it do the install update.zip option and nothing happened. Any pointers would be appreciated.
Click to expand...
Click to collapse
Did you download it to your phone? If so, it needs to be on your external SD card and you choose the option to install from there. You'll have to navigate to where you stored it on the external SD card.
If you didn't download it, then you should be able to push it via ADB PUSH when in the recovery. Just hook up your phone to your PC and do it that way. Just obtain the OTA from this thread. Somewhere, someone provided a link to it. Download it to your PC and then do an adb push to the external SD card of the OTA and then install it that way.
iBolski said:
Did you download it to your phone? If so, it needs to be on your external SD card and you choose the option to install from there. You'll have to navigate to where you stored it on the external SD card.
If you didn't download it, then you should be able to push it via ADB PUSH when in the recovery. Just hook up your phone to your PC and do it that way. Just obtain the OTA from this thread. Somewhere, someone provided a link to it. Download it to your PC and then do an adb push to the external SD card of the OTA and then install it that way.
Click to expand...
Click to collapse
Thanks for the tips. I must have done something wrong when I installed adb, I could not see the phone with the adb devices command, yet I could see the phone in the Matt utility as well as in RSD Lite. I'll give it a shot again, can't hurt. Called Moto and they escalated it and are sending me a replacement device.
So here is a string of steps I've already been through in trying to save my bricked Nexus 6: [Can't post outside link yet...]
Basically I got the 'your phone is corrupt' message from google and it kept forcibly shutting down. It would not boot up so someone suggested I side load a rescue OTA. At this point recovery existed and I went through all the steps and had it installing, only to fail mid-way through (~52%) and give me a 'read error' on my command prompt. I started the whole process over again just fine and it got to 73% before 'read error' failing again. I thought no big deal, I'll just keep doing this until it gets to 100%. Nope, recovery is gone. I cannot get there anymore. I start into Fastboot mode and scroll to recovery and hit power and it just goes to a new Fastboot screen and keeps flashing every time I try to select it. The Bootloader logs give me a 'failed to validate boot image: ret=-1' message and says 'Boot up failed.'
I can't find a single guide online that doesn't require recovery mode to work. At this point I don't care about my data and just want to get this phone working again before I throw in the towel and pay Motorola $175 for a refurb. I'm just barely over a year too. The Nexus 'expert' gave up and blamed the memory and maybe he is right but I wanted to run this by you guys first. This phone was completely stock and unrooted.
The only reason why I feel there is still a chance is because when I connect USB my computer reads it as an Android Device in Device Manager with 'Android Bootloader Interface' as a sub device. If the computer can read it, isn't there a chance that some kind of software exists that can forcibly load a new bootloader onto this phone without recovery? I'm 'competent' with computers and android phones but I haven't rooted or done any custom stuff in years so I'm at a loss for what's out there.
Thanks in advance for any help you can give me, even if it's to tell me I'm SOL.
Ok so far I have tried to load a custom recovery but that requires an unlocked bootloader. Then I tried using a toolkit to flash stock as a soft-bricked device but that also requires an unlocked bootloader and I can't unlock the damn bootloader. You know, I thought I was just playing it safe by leaving this phone as-is instead of playing around with it but it looks like I screwed myself by doing so.
Is this the wrong forum for this question?
JQ3 said:
Is this the wrong forum for this question?
Click to expand...
Click to collapse
Sorry for the delay
We have a dedicated help section for your device here
http://forum.xda-developers.com/nexus-6/help
Ask there to receive help
Good luck
Backstory: I upgraded to android 10 a few weeks ago, aside from a few user apps breaking, there weren't any system issues. Recently, I received another update (seems like a patch ?) to android 10 and updated as well. I'm not sure if this recent update actually completed.
Last night, it seems like my phone went into a boot loop while I was sleeping. When I woke up the phone was hot, and each boot was so short that there was no opportunity to go into recovery mode. I pretty much had no choice other than to let the battery drain.
So I walked away and came back a while later to a peculiar recovery screen that said "Cannot load Android system. Your data may be corrupt. If you continue to get this message, you may need to perform a factory data reset and erase all user data stored on this device."
There's only 2 options: "Try again" and "Factory data reset". `adb devices` from the PC is unable to detect my pixel 3 here. "Try again" simply attempts to boot, and I just return to this same screen again (at least it doesn't loop now). I'm reluctant to factory reset as I want to at least have the chance to back up some data.
I am able to enter fastboot from this screen using Power + Volume Down. `fastboot devices` from the PC is able to detect the phone. However, because the bootloader is locked (haven't unlocked the bl since i started using nexus/pixel phones), I don't know if there's much i can do here.
My question is, is there anything that I can try at this point to boot into android 10, recover some data, then do a factory reset ?
From fastboot, what happens if you try entering recovery? If you can get into recovery, you could sideload the OTA. https://developers.google.com/android/ota
sliding_billy said:
From fastboot, what happens if you try entering recovery? If you can get into recovery, you could sideload the OTA. https://developers.google.com/android/ota
Click to expand...
Click to collapse
It's not the "normal" recovery mode. There was the message "Cannot load android system. Your data may be corrupt." Other only options are:
- "Try again" , basically a reboot, which eventually brings me back to this screen
- "Factory Data Reset"
adb is unable to detect the phone in this mode, so I am unable to sideload an OTA.
superc0w said:
It's not the "normal" recovery mode. There was the message "Cannot load android system. Your data may be corrupt." Other only options are:
- "Try again" , basically a reboot, which eventually brings me back to this screen
- "Factory Data Reset"
adb is unable to detect the phone in this mode, so I am unable to sideload an OTA.
Click to expand...
Click to collapse
Not knowing what is available with the BL locked... Is the new rescue mode option one of the power up/down choices from your BL/Fastboot screen? That rescue mode is supposed to allow ADB command to work. If not, you are going to have to do a factory reset and if that doesn't help contact Google and RMA. Ability to get out of bricks is the biggest reason to unlock your BL (if you purchased a Google unlockable BL phone) unless you purchased a Verizon phone and can't. In that case, back to the last comment about factory reset/RMA.
superc0w said:
It's not the "normal" recovery mode. There was the message "Cannot load android system. Your data may be corrupt." Other only options are:
- "Try again" , basically a reboot, which eventually brings me back to this screen
- "Factory Data Reset"
adb is unable to detect the phone in this mode, so I am unable to sideload an OTA.
Click to expand...
Click to collapse
Had this happen and I had to do a factory reset prior to unlocking bootloader ,which as was mentioned above is way easier to fix because you can reflash factory image without wiping all data
same thing happened to me; the previous comments gave me the outline of what was needed, so thank you. now for the op:
1. on the screen that offers try again or factory erase, choose "try again"
2. IMMEDIATELY press and hold volume down
3. when you reach the bootloader screen, you may release volume down
4. this is the standard bootloader screen for pixel 3. you should be able to cycle options do so to select 'recovery" (or whatever it says. I'm not going to reboot my phone to see exactly what it says, but I'm sure you get the idea)
Hi, I have encountered device corrupt error on my pixel 4Xl few days back, after reaching out to google support and waiting for 4hrs I haven't received any resolution. In few instances device worked normally for few hours but kept on switching off. I did factory reset once as suggested but currently issue is still persistent. I am out of warranty by few months so I cannot send it google support. Please help me in fixing this issue.
Prudhvi89 said:
Hi, I have encountered device corrupt error on my pixel 4Xl few days back, after reaching out to google support and waiting for 4hrs I haven't received any resolution. In few instances device worked normally for few hours but kept on switching off. I did factory reset once as suggested but currently issue is still persistent. I am out of warranty by few months so I cannot send it google support. Please help me in fixing this issue.
Click to expand...
Click to collapse
Sounds like this problem. https://forum.xda-developers.com/t/...xxxx_sn-xxxxxxxx.4205331/page-7#post-85981389
Prudhvi89 said:
Hi, I have encountered device corrupt error on my pixel 4Xl few days back, after reaching out to google support and waiting for 4hrs I haven't received any resolution. In few instances device worked normally for few hours but kept on switching off. I did factory reset once as suggested but currently issue is still persistent. I am out of warranty by few months so I cannot send it google support. Please help me in fixing this issue.
Click to expand...
Click to collapse
So we know you get the corrupt message, support isn't helping, that in a few instances it worked normally for short periods, a factory reset didn't help, and yer out of warranty.
But can u get to fastboot? Is OEM unlocking on? Can u turn oem unlocking on in one of the "few instances", if it's not on?
If u can do the above, i'd follow googles instructions to unlock the bootloader and use the flash-all script and flash the latest firmware.
AsItLies said:
So we know you get the corrupt message, support isn't helping, that in a few instances it worked normally for short periods, a factory reset didn't help, and yer out of warranty.
But can u get to fastboot? Is OEM unlocking on? Can u turn oem unlocking on in one of the "few instances", if it's not on?
If u can do the above, i'd follow googles instructions to unlock the bootloader and use the flash-all script and flash the latest firmware.
Click to expand...
Click to collapse
Hi, thanks for responding back. Yes OEM is enabled on my device. I did reach out to google forums as well for support, they redirected to XDA for support with respect to flashing device.
PS: I am not at all a tech person and have very limited understanding in this area, I am just trying to save my phone.
Prudhvi89 said:
Hi, thanks for responding back. Yes OEM is enabled on my device. I did reach out to google forums as well for support, they redirected to XDA for support with respect to flashing device.
PS: I am not at all a tech person and have very limited understanding in this area, I am just trying to save my phone.
Click to expand...
Click to collapse
so then first follow this link and choose which version of android you'd like to flash to your 4xl (probably the latest one).
On that site click 'link' next to the chosen version and it will download the firmware zip file (this is the latest generic version: SP1A.211105.002, Nov 2021 --- if you have verizon or other choose the latest for that carrier).
Then you'll need to follow the directions near the top of that page that starts with the following:
Flashing instructions​The factory image downloaded from this page includes a script that flashes the device, typically named flash-all.sh (On Windows systems, use flash-all.bat instead).
etc etc etc.
If you have trouble, post back here and people will try to assist you.
cheers
AsItLies said:
so then first follow this link and choose which version of android you'd like to flash to your 4xl (probably the latest one).
On that site click 'link' next to the chosen version and it will download the firmware zip file (this is the latest generic version: SP1A.211105.002, Nov 2021 --- if you have verizon or other choose the latest for that carrier).
Then you'll need to follow the directions near the top of that page that starts with the following:
Flashing instructions​The factory image downloaded from this page includes a script that flashes the device, typically named flash-all.sh (On Windows systems, use flash-all.bat instead).
etc etc etc.
If you have trouble, post back here and people will try to assist you.
cheers
Click to expand...
Click to collapse
Hi, thanks for quick response. I am getting below error, not sure how to correct it.
Prudhvi89 said:
Hi, thanks for quick response. I am getting below error, not sure how to correct it.
Click to expand...
Click to collapse
So you're getting an error indicating you're trying to do something but it can't do it because the boot loader is locked. Obvious.
but here's what's not obvious; what are u trying to do? and why are u trying to do it?
from the looks of the output, yer trying to switch slots? why? there's nothing in those instructions I referenced above that tells u to switch slots? All yer gonna do is first unlock the bootloader and then use the flash all script.
maybe yer reading the wrong directions? Look again what I posted, find those exact words in the directions, do what's under that heading, not any other heading.
Currently I am not able to switch on my phone !!!
AsItLies said:
So you're getting an error indicating you're trying to do something but it can't do it because the boot loader is locked. Obvious.
but here's what's not obvious; what are u trying to do? and why are u trying to do it?
from the looks of the output, yer trying to switch slots? why? there's nothing in those instructions I referenced above that tells u to switch slots? All yer gonna do is first unlock the bootloader and then use the flash all script.
maybe yer reading the wrong directions? Look again what I posted, find those exact words in the directions, do what's under that heading, not any other heading.
Click to expand...
Click to collapse
Currently I am not able to switch on the device !!
Prudhvi89 said:
Currently I am not able to switch on the device !!
Click to expand...
Click to collapse
That sounds ominous. You may now be afflicted with the pixel 'stuck in edl mode' problem, which unfortunately there's no solution for.
Try this; plug the device to pc using usb cable, then look in device manager, if you see the device connected with QUSB_BULK_CID (etc), that means it's in EDL mode.
if that's the case, follow this thread to learn more about that, but unfortunately there is no fix, as yet. And I've read just yesterday google is replacing devices with this issue for some.
Just an fyi, if your device is in this state, it's not anything you did, it's the fault of the device. Some believe it to be hardware failure, which seems the most plausible explanation.
AsItLies said:
That sounds ominous. You may now be afflicted with the pixel 'stuck in edl mode' problem, which unfortunately there's no solution for.
Try this; plug the device to pc using usb cable, then look in device manager, if you see the device connected with QUSB_BULK_CID (etc), that means it's in EDL mode.
if that's the case, follow this thread to learn more about that, but unfortunately there is no fix, as yet. And I've read just yesterday google is replacing devices with this issue for some.
Just an fyi, if your device is in this state, it's not anything you did, it's the fault of the device. Some believe it to be hardware failure, which seems the most plausible explanation.
Click to expand...
Click to collapse
Ok got it !! Thanks for your prompt response & support.
The "Cannot load Android system, Your data may be corrupt" error is known as Rescue Party. Fortunately, fixing it should be relatively simple.
Try dirty flashing the factory image. Do not attempt to flash a patched boot image; leave everything stock.
If that fails, select "Factory data reset". It will wipe your phone, but it should reboot into Android system.
That bootloader message "Your device is corrupt. It can't be trusted" means that the signed key for Verified Boot somehow got screwed up. In this case, I would also recommend reflashing the factory image.
In both cases, the easiest option is to use the Android Flash Tool. It's like a GUI for flashing the factory image.
I'm sorry if this problem is solved elsewhere but I've tried to look & I'm only wasting time. Ok so I've got a refurbished 9 that came from insurance and it was on android 11 still and would not update to 12, my old one did no problem. I'm in the US, and on T-Mobile locked and i thought i was updating and when it restarted i got this message: Your device is corrupt. It can't be trusted and will not boot
Visit this link on another device: g.co/ABH
--
which i did and it didn't tell me anything useful. I literally cant do anything with it, not a soft reboot or safe or whatever its called, power and volume up and down then together both volume & power i get the recovery, reboot, barcode, power off, start, screen and I've tried all and tried taking out sim, nothing helped. I have no idea how to fix this step by step, literally need baby steps step by step how to get this back. Someone please help and i apologize, I'm disabled & i just cant afford to have it sent off and repaired. Thanks in advance to anyone & everyone who can help.
Keep it on fastboot and you can either do all the commands to flash the image files or plug into your computer, use the Indian MSM and click start, then reboot your phone and it will grab it and should flash it that way too