Hello all,
I have lost the USB connection to my Gear 2 Neo watch.
When I plug it into my computer - the computer does not seem to connect: no USB connection prompt appears and I do not see the watch from the file manager either. SDB devices shows no device . Charging works
This has worked before - all I did was to do a factory reset on the watch...
I have reinstalled the samsung USB drivers (got a warning that they were already installed - reinstalled anyway), but the watch still does not show.
USB debugging is enabled...
Any ideas?
Thank you all
Gadgetguy2005 said:
Hello all,
I have lost the USB connection to my Gear 2 Neo watch.
When I plug it into my computer - the computer does not seem to connect: no USB connection prompt appears and I do not see the watch from the file manager either. SDB devices shows no device . Charging works
This has worked before - all I did was to do a factory reset on the watch...
I have reinstalled the samsung USB drivers (got a warning that they were already installed - reinstalled anyway), but the watch still does not show.
USB debugging is enabled...
Any ideas?
Thank you all
Click to expand...
Click to collapse
Wow. Found the answer... The USB cable I have used was the culprit. Used a different USB cable and now it works...
Brand New Unlocked S8+... Tried to connect it to my PC to use a previous copy of smart switch backup but it never connects.. Windows Explorer never displays a mounted drive either. Smart Switch Eventually comes back with Failed to connect to the device.
The Phone displays the "Attention The connected device is unable to access data pm this device. Reconnect the USB cable and try again...."
Phone is on Transfer Media files (MTP)
USB Debugging is one.
Device Manager says "Samsung Android Phone - SAMSUNG Android ADB Interface" two times - No red or yellow exclamations.
I've removed the software in device manager and restarted both the phone and the laptop multiple times.
I updated Smart Switch and did More\Reinstall Device Driver.
Does anyone else have any workarounds for this? I found one article (https://www.recovery-android.com/connect-samsung-to-computer.html) but still no success.
I actually have the exact same issue on windows 10. Anyone figured out a solution?
Doesn't seem like there is much help here on the 2 Samsung formums I posted on....
I know its not my windows profile as I have tried 3 different profiles as well as safe mode.
Tried 2 different sets of Samsung USB drivers and no improvement.
Like I said I had no issues on a windows XP machine or a windows 10. I didn't even need to install the USB drivers/Smartswitch on either of those machines.
We can't be the only 2 people!
Kalveitt said:
I actually have the exact same issue on windows 10. Anyone figured out a solution?
Click to expand...
Click to collapse
Firstly, i cannot give you direct answers.
Just my thoughts.
i have a S8+. No root stock as is.
I have Lenovo laptop Win 10.
From day one, out of box, i connected
S8+ and it connected. I can do whatever
i want. Transfer data, photos videos.
ADB etc
So it should work...?
However i do realize there are quite a few things to consider......
Samsung drivers on laptop and a few other
issues..... eg
For one,
have you enabled
in Phone /Settings /Developers Option /Usb debugging.?
Normally first time when you connect
With pc /laptop you should get
a small pop-up message(on device) to allow
phone to connect.?
(that's my experience, over years)
Good luck
Yes, USB Debugging is on and connection is set to MTP.
Windows recognizes "USB Android" but dosnt install the driver successfully.
It will appear as a modem in Device manager but nothing is mountable.
I have 2 desktop pcs with win 10. One with samsung software Kies 3 and smart switch installed and the other no samsung software. Both find the device Galaxy S8+, in device manager under universal serial device controllers i have Samsung Mobile USB Composite Device. You have an adb driver I think because you have usb debugging on, i would turn usb debugging off. The pc should find a device connected to the usb and download a driver, once done the device is recognised as galaxy S8+ in my case but will not communicate with the pc until the phone has given permission. On the phone will be a message asking you to allow the connection. Hope this helps ??
psuhbggrad said:
Yes, USB Debugging is on and connection is set to MTP.
Windows recognizes "USB Android" but dosnt install the driver successfully.
It will appear as a modem in Device manager but nothing is mountable.
Click to expand...
Click to collapse
Firstly i do understand that you
must be quite annoyed trying to figure
out issues. (I would) Thankfully i don't.
Bottom line is that it should work..!
My experience confirms, that S8+/laptop Win 10 works.... 100%when connected
However a few suggestions.
If you feel you checked all checkbox.?
However you never said anything
about popup notice ? granting premission
for device to connect.?
So device /laptop /pc is not "seeing" each other?
All Samsung devices I have used, first time connection gives me this popup a notice
Can't remember exact wording.
Something... eg
Device id 5786446.......
Have or does your other Samsung devices
connect etc.?
Have you tried connecting to a friend pc laptop.
An option is to go to a Samsung Care Center
and as them to test and connect.
My experience (in past) is that they should
assist you.
If it connects to friend pc or Service provider /Samsung Care Centre.
Then surely it has to be your pc/laptop?
So I turned off usb debugging and revoked the permissions on the phone, connected it to my PC.
Samsung Android (with a Yellow Exclamation) was already present in Device Manager under "other devices" so I uninstalled that.... and rescanned. My laptop attempted to reinstall but it generated a Driver Installation Failed message on "SAMSUNG_Android" - no driver found.
Device Manager once again shows the Yellow Exclamation Point
I would go on to Samsung support look up the phone and download the usb driver and install from the download. Good luck
I've downloaded the drivers from Samsung 2x.
psuhbggrad said:
So I turned off usb debugging and revoked the permissions on the phone, connected it to my PC.
Samsung Android (with a Yellow Exclamation) was already present in Device Manager under "other devices" so I uninstalled that.... and rescanned. My laptop attempted to reinstall but it generated a Driver Installation Failed message on "SAMSUNG_Android" - no driver found.
Device Manager once again shows the Yellow Exclamation Point
Click to expand...
Click to collapse
I can vaguely remember that i had this same
issues with my Note 5 and Win 10.
This was many months/year or two, ago.
I also had yellow exclamation etc.
Further in Device manager( laptop) kept installing wrong Samsung drivers.!
I uninstalled drivers/installed and battle for a few months like this Then one day Windows
did an update and in update i noticed
Samsung drivers included etc. (must have been correct)
Ever since that update i had no issues again.
Bottom line... some drivers issue?
Not S8 +?
Good luck
psuhbggrad said:
Brand New Unlocked S8+... Tried to connect it to my PC to use a previous copy of smart switch backup but it never connects.. Windows Explorer never displays a mounted drive either. Smart Switch Eventually comes back with Failed to connect to the device.
The Phone displays the "Attention The connected device is unable to access data pm this device. Reconnect the USB cable and try again...."
Phone is on Transfer Media files (MTP)
USB Debugging is one.
Device Manager says "Samsung Android Phone - SAMSUNG Android ADB Interface" two times - No red or yellow exclamations.
I've removed the software in device manager and restarted both the phone and the laptop multiple times.
I updated Smart Switch and did More\Reinstall Device Driver.
Does anyone else have any workarounds for this? I found one article (https://www.recovery-android.com/connect-samsung-to-computer.html) but still no success.
Click to expand...
Click to collapse
In the past I had this problem I downloaded USBDeview to my PC and deleted all of the old Samsung drivers, after rebooting the PC the phone was able to connect with the PC.
Tried USBDeview and removing the Samsung drivers but no difference
Still unable to connect.
I'm having this problem as well. I'm still trying to work it out, but when I remove and re-add the device through Device Manager I get this error: "An existing device was found that is a duplicate of the device being manually installed" and the device DOES connect as a camera, just not for full file transfer.
I had the same problem and tried many of the fixes, including different USB cables and different computers and different phones. I finally figured out that the case I had on the S8+ was the problem (at least for me). I took it off and everything works.
Hi, i have a pc with windows 10 . In device manager under universal serial device controllers i have Samsung Mobile USB Composite Device. i think you should meet best mobile shop.
jimmygarison said:
Hi, i have a pc with windows 10 . In device manager under universal serial device controllers i have Samsung Mobile USB Composite Device. i think you should meet best mobile shop.
Click to expand...
Click to collapse
I have Windows on Lenovo Laptop with latest Windows updates installed. Yesterday, I downloaded Samsung Smart Switch unlocked the phone and connected it to the laptop. Smart Switch found it immediately and I did a backup. I did not need to check Device Manager. It must be a drivers problem as mentioned above.
Note 8, getting "Attention The connected device is unable to access data pm this device."
And I am only able to see some files, Sammy is a crazy fool, this is basic stuff
installed the windows fall update a week ago now connect my phone to my laptop and nothing is recognised, no phone memory and no memory card just a empty space when i click the icon where my phone should be, i've had samsung drivers installed and they have worked fine so far till today, any ideas where to find the latest drivers? and what else i can do to get access to my phone on my laptop?
solution that worked for me
On my windows 10 PC, I opened device manager (open up start and just type 'device manager') and under portable devices there was a usb device called MTP USB device or something like that (I forget the exact name) with a small triange and an exclamation mark next to it. I clicked on that and then clicked "update drivers." When the prompt comes up I chose the automatically look for drivers option. This fixed the issue and now my Galaxy s8 is recognized (it no longer says MTP USB device or whatever it was). Hopefully this works for others as well. You can also probably download the usb drivers for the phone from samsung.
Hello, I have been struggling with this one for a few days...
I have a Linux ADB installation and I can use it to connect to my devices, except for one - a Galaxy S3 running Resurrection Remix 5.8.3.
When I do `adb devices` the repsonse is an empty list. The phone does show the `USB debugging connected` alert. It also shows `USB charging for this device`.
I've read that latter one should be changed to `Transfer Phots (PTP)` but doing so makes no difference, and unplugging and reconnecting the USB resets this option to the charging setting.
I've tried everything that I can think of.... disabling and reenabling USB debggging and developer mode.
I don't think it's the ADB because it works fine with any other device that I try.
What else can I try?
ogpog said:
What else can I try?
Click to expand...
Click to collapse
Do you have the specific drivers installed for your phone? If you do not, install them and then try
If you do, uninstall and install again.
I am not sure what "specific drivers" I need. I am running `adb` from `android-tools 8.0.0_r17-1` on Arch Linux. I am pretty sure that the client side is fine because it does work sometimes, as I explain below.
I did a firmware update as an attempt to fix this. I now have "RR-N-v5.8.5-20171217-i9300-Final". I have since been able to get it to work but it is hit-and-miss.
First I note that the usb connection resets to charge-only whenever it is disconncted/reconnected. This requires that the appropriate mode needs to be selected each time the USB is plugged into the device.
I connect the phone via USB to the computer and try `adb`. It doesn't work (`adb shell` reports `error: no devices/emulators found`).
I open the "Developer Options" of the settings screen. I "Revoke USB debugging authorisations" so that I get the authorisation pop-up when the adb connection works as a visual cue that the connection is working. An alternative way to get feedback is to use `adb wait-for-device` on the computer - this blocks until the connection is made and, when it exits `adb shell` works immediately afterwards.
I then go to the "Networking" selection, choose "Select USB Configration" and then change the setting from "Charging" to "PTP (Photo Transfer Protocol)". Perhaps adb will work, but unlikely. If it doesn't work I keep selecting between the various usb options and, eventually, adb starts working. It only ever seems to work on the PTP mode.
I find doing this a few times may get adb working or it may cause the device to fall over and reboot. In fact, the latter scenario is the most likely!
(edit, I think the reboot may be a result of selecting the 'audio source' option and not relevant. Selecting between charging and ptp a good few times (30-ish - I lose count) eventually gets adb working).
My work-around to this problem is to connect ADB over the network which works reliably but requires opening a terminal on the device to configure and start the service.
Hi everyone,
Yesterday I broke my Galaxy S7 screen in the building's stairs while leaving home.
I want to save all the stuff I have on it, but recently I installed a new stock rom and forgot to tick in the developer menu "usb debug".
I tried an adb connection but the phone is unauthorized...
I read on some french board that I could flash a special kernel (with debug usb ON) to be able to get an adb connection. but that I will be blocked because I never accept any adb connection while having my screen working....
Is there any solution ?
I need help to hopefully resolve my issue.
Have a nice end of day.
You can connect an USB keyboard/mouse. Maybe an USB-hub works too so you can connect a PC and keyboard at the same time.
I was able to unlock my screen but I can’t access to my storage because I have to enable the sharing storage...
It seems there is no solution.
Hi,
Basically I have a Samsung S7 Edge (SM-G935F) which the screen is completely smashed on (no display no touch). When I connect it to the PC it detects the phone but it doesn't show the folders inside (can only assume its got a prompt to accept PC or USB debugging isn't enabled).
After a lot of testing with OTG cables keyboards/mouse etc the furthest I got was putting the phone into Recovery Mode (PWR, VOL UP & HOME) then selected APPLY UPDATE ADB.
When I run the ADB in Powershell and run "adb devices" it finds the device ID and says "sideload".
Is there any command I can run to pull the files off my internal DCIM folder (thats all I really need)?
I did read up the only way this could be possible is to install a custom rom (TWP with ODIN?) and then pull files off.
Is this possible and would installing a custom rom delete my internal files as that would render this pointless.
Sorry im new to a lot of this so all my knowledge is just what ive read recently.
Thanks
1. To pull user data USB-debugging must got enabled. May be this method works for you to enable it:
2. To flash TWRP it's required device's bootloader got unlocked - what requires OEM unlock must got enabled . Note: Unlocking bootloader erases all user data.
jwoegerbauer said:
1. To pull user data USB-debugging must got enabled. May be this method works for you to enable it:
2. Once you unlock device's bootloader - what is required to flash TWRP - all user data get lost.
Click to expand...
Click to collapse
Thanks for the reply,
Ok so my only option is the "blind" method.
I have the app installed via Google Play Store on my PC to the device however when I hold down the home button to ask google I hear no reply from her, is there any hotkey to use for this device to ask google or any alternative methods to open this app?
I can see the S7 Edge is connected to my WIFI as it shows on the Sky Hub and IPScanner.
Also is there a way to tell what android interface version I have so I can follow someone on Youtube going into Settings or Apps etc to open the app.
I feel like I am so close to getting these photos off the phone but its just a blind guess at the moment.
I managed to get a hold of a friends S7 Edge, using this I mapped out some keyboard functions to turn on developers options then usb debuggings.
What I have noticed is now when I connect the phone via USB to the PC and run ADB DEVICES it shows up the ID then unauthorised as the status, so I can only assume this means I have USB DEBUGGING ENABLED.
Is this correct?
If so why when I open the Samsung Galaxy in Windows does it still not show the folders, is there another setting I need to turn on/off?
Rowan88 said:
I managed to get a hold of a friends S7 Edge, using this I mapped out some keyboard functions to turn on developers options then usb debuggings.
What I have noticed is now when I connect the phone via USB to the PC and run ADB DEVICES it shows up the ID then unauthorised as the status, so I can only assume this means I have USB DEBUGGING ENABLED.
Is this correct?
If so why when I open the Samsung Galaxy in Windows does it still not show the folders, is there another setting I need to turn on/off?
Click to expand...
Click to collapse
you are confuse you want to view phone content and sd card? you need to change from charging to MTP connection from drop-down notification bar of your device
ineedroot69 said:
you are confuse you want to view phone content and sd card? you need to change from charging to MTP connection from drop-down notification bar of your device
Click to expand...
Click to collapse
I want the internal storage contents of DCIM on the phone.
I followed the steps on my "donor" phone to go into Developer Options > USB Configuration > MTP but all that happens is the phone detects on Windows but wont show me the contents of it.
I also tried changing to PTP but same issue.
I know there is a pop-up that shows on the phone asking to ALLOW THE PC TO ACCESS FILES but I cannot have the USB DATA CABLE and OTG/KEYBOARD plugged in at the same time (and I also tried two OTG adapters both came up MOISTURE DETECTED when using).
So unless anyone knows of a OTG SPLITTER that 100% works with S7 EDGE then I need to find a way to either bypass the ALLOW MESSAGE or manually add my PC to its allow list.
Rowan88 said:
I want the internal storage contents of DCIM on the phone.
I followed the steps on my "donor" phone to go into Developer Options > USB Configuration > MTP but all that happens is the phone detects on Windows but wont show me the contents of it.
I also tried changing to PTP but same issue.
I know there is a pop-up that shows on the phone asking to ALLOW THE PC TO ACCESS FILES but I cannot have the USB DATA CABLE and OTG/KEYBOARD plugged in at the same time (and I also tried two OTG adapters both came up MOISTURE DETECTED when using).
So unless anyone knows of a OTG SPLITTER that 100% works with S7 EDGE then I need to find a way to either bypass the ALLOW MESSAGE or manually add my PC to its allow list.
Click to expand...
Click to collapse
Followed steps again and changed to PTP and FILES ARE NOW SHOWING!!
Happy man!
Thanks for all the help
Rowan88 said:
I want the internal storage contents of DCIM on the phone.
I followed the steps on my "donor" phone to go into Developer Options > USB Configuration > MTP but all that happens is the phone detects on Windows but wont show me the contents of it.
I also tried changing to PTP but same issue.
I know there is a pop-up that shows on the phone asking to ALLOW THE PC TO ACCESS FILES but I cannot have the USB DATA CABLE and OTG/KEYBOARD plugged in at the same time (and I also tried two OTG adapters both came up MOISTURE DETECTED when using).
So unless anyone knows of a OTG SPLITTER that 100% works with S7 EDGE then I need to find a way to either bypass the ALLOW MESSAGE or manually add my PC to its allow list.
Click to expand...
Click to collapse
fully charge your phone and hopefully the heat generated from charging process remove the moisture detected warning or you can also use hair blower to heat your charging port area
also don't put your device on microwave oven unless you want to see some fireworks