Related
Hey guys,
is it possible to flash the boot.img with the Qualcomm Flash Image Loader (QFIL) ?
Im trying to install an image on my Alcatel without doing the initial setup an activating usb-debugging. Is it possible to accomplish this task ?
Kind regards
Solution to below problem found in this thread: https://forum.xda-developers.com/oneplus-7-pro/how-to/rom-stock-fastboot-roms-oneplus-7-pro-t3931424
------------------------------------------------------------------------------
So I tried to root my OnePlus 7 Pro, somehow managed to get it stuck in fastboot. No matter what I flash or do to reboot, it just boots back into fastboot.
Normally I'd just flash stock recovery / ROM found on OnePlus' website, but they haven't added anything for OnePlus 7 (Pro) yet.
Anyone got any clue about this?
Nozemi said:
So I tried to root my OnePlus 7 Pro, somehow managed to get it stuck in fastboot. No matter what I flash or do to reboot, it just boots back into fastboot.
Normally I'd just flash stock recovery / ROM found on OnePlus' website, but they haven't added anything for OnePlus 7 (Pro) yet.
Anyone got any clue about this?
Click to expand...
Click to collapse
Give this a read and see if solution helps you
https://forum.xda-developers.com/oneplus-7-pro/help/oneplus-7-pro-bricked-t3931629
SysAdmNj said:
Give this a read and see if solution helps you
https://forum.xda-developers.com/oneplus-7-pro/help/oneplus-7-pro-bricked-t3931629
Click to expand...
Click to collapse
Found the solution there! Thanks a bunch!
(I'll update the OP with exact solution)
Nozemi said:
Found the solution there! Thanks a bunch!
(I'll update the OP with exact solution)
Click to expand...
Click to collapse
Hello,
What post was it ????
im still stuck in fastboot, when i flash persistent.img with fastboot flash boot persistent.im nothing changes an with fastboot flash persistent persisten.img it just says that you cant flash critical partitions HELP PLZ
BeatsXD said:
im still stuck in fastboot, when i flash persistent.img with fastboot flash boot persistent.im nothing changes an with fastboot flash persistent persisten.img it just says that you cant flash critical partitions HELP PLZ
Click to expand...
Click to collapse
You have to get the original boot image and recovery image flash the boot image make sure the phone is in fast boot mode it's the same flashing sequence for the Oppo 10x zoom
Hello everyone,
I have the P20 Pro 9.0.0.283(C792E5R1P9) - Canadian version and during my attempt to install TWRP and Magisk I endup flashing the twrp.img on my boot partition and now I can't upgrade to 9.1.0.317(C792E8R1P9) or even hard reset, because when it boots the original boot partition is damage and not even via HiSuite I can't upgrade to the new one.
I need to know if someone has this build 9.0.0.283 (C792E5R1P9) that I can extract the boot.img and re-flash on my phone.
And the phone works normally, just the boot that is compromised.
Thank you
You will half to boot it into fastboot and fix it that way
what do you mean i have same issue as him ? do i need the stock boot.img to flash or can it be solved with another way ?
Bcoates84 said:
You will half to boot it into fastboot and fix it that way
Click to expand...
Click to collapse
what do you mean i have same issue as him ? do i need the stock boot.img to flash or can it be solved with another way ?
Bcoates84 said:
You will half to boot it into fastboot and fix it that way
Click to expand...
Click to collapse
Taken Down
i tried to install various twrp (c1, 2 pro, etc) in my realme 2 but when ever i go to recovery it shows stock recovery
i also tried > fastboot boot rfecovery.img
but it stucks on realme boot logo
but again after starting my phone when i tries to boot recovery it shows stock recovery again and again
plz help me to install and run twrp in my realme 2
brother did you get your solution? same peoblem here
sachin282 said:
i tried to install various twrp (c1, 2 pro, etc) in my realme 2 but when ever i go to recovery it shows stock recovery
i also tried > fastboot boot rfecovery.img
but it stucks on realme boot logo
but again after starting my phone when i tries to boot recovery it shows stock recovery again and again
plz help me to install and run twrp in my realme 2
Click to expand...
Click to collapse
yo please share solutuion if you found i t
ikiwev said:
brother did you get your solution? same peoblem here
yo please share solutuion if you found i t
Click to expand...
Click to collapse
Did any of you have the solution? Cause I faced the same problem....
sachin282 said:
i tried to install various twrp (c1, 2 pro, etc) in my realme 2 but when ever i go to recovery it shows stock recovery
i also tried > fastboot boot rfecovery.img
but it stucks on realme boot logo
but again after starting my phone when i tries to boot recovery it shows stock recovery again and again
plz help me to install and run twrp in my realme 2
Click to expand...
Click to collapse
Download vbmeta.zip for ur phone and install it with this command (fastboot)
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
And then try unofficial twrp for realme 2
Hi, I am looking for the boot.img for LineageOS 18 20211002-nio-156
I had damaged boot on my device, and it goes to fastboot mode every time. I have tried looking for the boot.img on LineageOS website, but there is only LineageOS 20 images.
If anyone have the image, version of LineageOS 18 20211002-nio-156, would you kindly share with me? Thanks a lot!
Just look for a tool to unzip the ROM and get the boot.img
Deivid Soltoski said:
Just look for a tool to unzip the ROM and get the boot.img
Click to expand...
Click to collapse
Thanks for your reply, unfortunately I do not have the ROM.
Oh :l
Deivid Soltoski said:
Oh :l
Click to expand...
Click to collapse
I got the img of 20211002-nio. But after I used
fastboot flash boot_a boot.img
to falsh boot_a and boot_b, the Edge S still goes to fastboot mode with the litte green robot on screen. Did I did it wrong, or is the version of my Edge S is different? Is there anyway to tell which version of my device is using from the fastboot screen?
I found this on screen
BL: MBM-3.0-NIO_RETCN-840E9BB764-211103
Should I use image of MBM-3.0-NIO_RETCN-840E9BB764-211103?
There are couple of game save files I have not backup. Is that possible to use fasboot mode or recovery mode to get those files out? Then I can flash the device.
fuluel said:
I got the img of 20211002-nio. But after I used
fastboot flash boot_a boot.img
to falsh boot_a and boot_b, the Edge S still goes to fastboot mode with the litte green robot on screen. Did I did it wrong, or is the version of my Edge S is different? Is there anyway to tell which version of my device is using from the fastboot screen?
I found this on screen
BL: MBM-3.0-NIO_RETCN-840E9BB764-211103
Should I use image of MBM-3.0-NIO_RETCN-840E9BB764-211103?
Click to expand...
Click to collapse
RETCN it's chinese ROM, you will have to reinstall the ROM or install stock Android 11 because it conflicts with Android 12 bases
Deivid Soltoski said:
RETCN it's chinese ROM, you will have to reinstall the ROM or install stock Android 11 because it conflicts with Android 12 bases
Click to expand...
Click to collapse
I saw TWRP (Team Win Recovery Project) has a button called Mount. Is that possible to get some files out the phone? But I have not Edgs S or G100 in there list. The closest one is Edge (racer). Is that OK to use this image?
fuluel said:
I saw TWRP (Team Win Recovery Project) has a button called Mount. Is that possible to get some files out the phone? But I have not Edgs S or G100 in there list. The closest one is Edge (racer). Is that OK to use this image?
Click to expand...
Click to collapse
Mount just mounts the cell phone partitions to access and modify them, and the G100 only works with TWRP on Android 11 only, and don't even try to install another type of ROM/recovery from another device because you can have your device blocked and then just throw it in the trash XD
When I am tring to flash Lineage-images-18-20211002-nio-156, I always got signature verification failed message. When I click YES, the process just stopped.
I had followed this guide https://wiki.lineageos.org/devices/nio/install/variant1 Is there anything I did wrong? Or is that possible to disable signature vericication in LOS revocery?