Hello all,
To put it simple:
1. I buy oneplus power bank
2. Charge it with my original opo cable and charger
3. My oneplus didnt recognized as storage when connected to PC yet it is shown in charging state.
What I have tried:
1. enable disable usb debugging
2. select usb connection mode (mtp or charging or pnp) but it is not available
3. Recognized as storage using other cable data which havent been used to charged the power bank.
My question is : is it normal that your data cable will broken as soon as you use it as power bank's charging cable?
Nope, I think that's virtually impossible, have you tried using other cable to connect your phone with the PC?
Hi All,
1) when i plug in charger into the phone, there is no sound, no led, no anination in statur bar of charging. But the phone is charging perfectly in the background. (using xiaomi original 2A charger with original cable).
2) when i restart the phone while charging it restarts and shows yellow charging led(and turns green too at 100%), but if plug out the charger the led goes away and comes only after i restart again.
2)when i plug in the phone in laptop usb it does nothing. no internal storage shown, nothing in device manager, nothing is detected in misuite as well. i cant access usb at all.
3) phone is only detected in fastbooth mode by miflash which i used to update to latest xiaomi official rom.
what ive tried.
1) various chargers and data cables of different ratings.
2) i have reinstalled all mi4i drivers, adb drivers, misuite etc.
3) have wiped cache several times.
4) have installed latest room.
no idea whats going on. is it a known bug or something? please help
Hello there everyone, hope you guys are doing great. Well, this thread might be a bit stupid at first since many others might have posted something related to it but since I couldn't find the exact answer, I had to post a newer thread.
I have a Fire Phone which used to run great and perfect and I had been using it the other day while charging it with an Aspor Powerbank which does run great. The Fire Phone got stuck due to a few NOT FOR THE FIRE PHONE apps such as the Instagram and the rest. When stuck, I held the power button for 10-15 seconds to do a reset and it did work while it was still on charging. Now the phone wouldn't turn on without the AC power via the USB. It gets stuck in a boot-loop. Just shows the Amazon logo and restarts again. Nothing works at all, not even the recovery mode or the rest or even resets without the USB plugged in.
I did try to upgrade but was of no use at all, did try the Cynogen OS by flashing it in. It didn't work at all and the same issue persists. I have removed the battery and plugged it back in but again of no use. The battery does charge if you think it's the battery, The battery does stay there active and great. I did try changing the USB cable and the Adapter. Nothing!
One more thing, when plugged in to AC, I can go to the Recovery Mode and then remove the USB cable, the Recovery Mode does stay active on battery power for countless hours. What should I do?
Is it the USB port? Is the battery? Or is it just me?
Oh btw, I did try installing the Stock Update available on Amazon.com and the PC (Windows 8 64-bit) does recognize the phone on ADB mode. Does list the serial of the phone when connected but when side-loading an update via the ADB, it says that it doesn't read! Gives an error. How do I work on that? I did try installing the ADB drivers again but still nothing. Did try downloading the updates from other sites and even a downgraded file, nothing works. What should I do?
First of all thanks to all helpers over here
and sorry for my bad english
so its working fine the problem started when i clean install windos 10 pro after that i connect to pc via usb it not
connecting i thought its the drivers problem so i tried these things-
1 update drivers through windows update
2 tried to install drivers by nif (after google)
3 installed MotorolaDeviceManager_2.5.4
4 changing usb ports
But not worked yet evern not showing usb notification after connecting to pc then i reboot my pc to windwos 7 home premium but same problem and tried all same thing.
Then i realise that my phone battey icon shows charging but not charging battery draining slowly so i removed it but battery icon showing it charging even after revoving plug then i turned it
off then againg it showing charging even if it off without any charger then after google i reboot in twrp recovery and started backing up my rom at that time
i connect my wall charger so after some time when backup finished i start my phone then it charging normally but againg when i connect to my pc it again shows me same
problem.
Now the actual problem is whenver i connect to my pc battery icon start showing its charging even after remove usb then after connecting to my wall charger in recovery
mode for about 5-6 mints its working fine.
Thanks to all in advance i hope someone will solve my problem
My Device is Moto G 2015
2 GB Stock 6.0.1 with January 2017 security patch
Hi, I have a S10e T-Mobile which runs Snapdragon. When i used my phone on May security patch, the phone was okay. I can connect it to my pc without any problem. But yesterday, when i update it from May patch to September security patch then when plug it to my pc, the phone shows only charging. I even try to go to download mode and odin can't recognize the phone as well.
Yeah, yesterday on May patch i plugged my phone once and still okay til i updated my phone to lastest update. Anyone has the same problem?
Update: I changed my phone case and the phone now can connect PC and charging faster than before. Maybe the cheap phone case is the problem.
Update 2: After October patch, the problem now comes back. T-mobile forced me to install so i think after a few week the problem will be gone
Update 2022:The problem now is gone, i tried serveral update and I can't trigger the bug anymore. Thanks everyone.
If it doesn't show on Odin, you're screwed. The only way is to report and wait for an update. Have you considered doing the common steps?
Another USB cable? Another PC? OTG? Fast charging? Port clearance of any obstacles? Reboot? Wipe cache? Factory reset? Safe mode?
Mohamedkam000 said:
If it doesn't show on Odin, you're screwed. The only way is to report and wait for an update. Have you considered doing the common steps?
Another USB cable? Another PC? OTG? Fast charging? Port clearance of any obstacles? Reboot? Wipe cache? Factory reset? Safe mode?
Click to expand...
Click to collapse
Yeah, i try everything like:
- Clean usb C port but it has only some dust and still can't do anything after that
- I have about 5-6 usb C cable and i only use one. The others are all new, i just buy them about 1 month ago. My redmi note 7, redmi 8A... still can connect but not my S10e
- I try other PC but it couldn't recognize my phone
- Disable fast charging but still can't connect
- Reboot, clean system cache, factory reset but nothing changes
Maybe new update just broke the ability to connect usb?
The bug may not affect me much because i use FTP and cloud services but may be for another it'll be a huge problem.
Ga_hap_la_chanh said:
Yeah, i try everything like:
- Clean usb C port but it has only some dust and still can't do anything after that
- I have about 5-6 usb C cable and i only use one. The others are all new, i just buy them about 1 month ago. My redmi note 7, redmi 8A... still can connect but not my S10e
- I try other PC but it couldn't recognize my phone
- Disable fast charging but still can't connect
- Reboot, clean system cache, factory reset but nothing changes
Maybe new update just broke the ability to connect usb?
Click to expand...
Click to collapse
Yeah you're totally screwed. That update was definitely bugged. The only thing you can do is to file a report through Members app and wait for a hotfix.
I got a semi-new device that was working great, on One UI 3.1, but once an update came, I updated the phone, and ever since, the green tint problem showed up.
If I ever bought another Samsung phone, I'll never update it. The only exception is through custom ROMs.
Try this:
1. You basically need to perform hard reset on the phone while S10e is connected to the PC through a USB-C cable
2. To perform the hard reset press POWER + VOLUME DOWN at the same time until system shuts off
3. Now it would either reboot on its own or you would need to reboot yourself
I tried this as my phone was neither charging nor connecting to PC (error about something wrong with my phone's USB)
Ritesh10 said:
Try this:
1. You basically need to perform hard reset on the phone while S10e is connected to the PC through a USB-C cable
2. To perform the hard reset press POWER + VOLUME DOWN at the same time until system shuts off
3. Now it would either reboot on its own or you would need to reboot yourself
I tried this as my phone was neither charging nor connecting to PC (error about something wrong with my phone's USB)
Click to expand...
Click to collapse
Hi, now my phone can connect to pc okay, charging is fast but otg still can't work. I can confirm that otg works fine with my 3 other phones.
When i changed my phone case to a brand one, Ringke, usb now works. I just don't know why
Ga_hap_la_chanh said:
Hi, now my phone can connect to pc okay, charging is fast but otg still can't work. I can confirm that otg works fine with my 3 other phones.
When i changed my phone case to a brand one, Ringke, usb now works. I just don't know why
Click to expand...
Click to collapse
Welcome to the world of Samsung Galaxy phones, amazing hardware with weird software bugs
Ritesh10 said:
Try this:
1. You basically need to perform hard reset on the phone while S10e is connected to the PC through a USB-C cable
2. To perform the hard reset press POWER + VOLUME DOWN at the same time until system shuts off
3. Now it would either reboot on its own or you would need to reboot yourself
I tried this as my phone was neither charging nor connecting to PC (error about something wrong with my phone's USB)
Click to expand...
Click to collapse
I have the same issue on a G970F. Unfortunately the POWER + VOLUME DOWN method didn't work. Am now wondering if there's a hardware issue. My other G970F is fine. Both are running LineageOS 18.1.