So I've installed WmWifiRouter, and I'm really happy with it as an alternative to Bluetooth DUN/PAN, however, I've run into the following issue:
Once I have WMWifiRouter installed and configured, I am no longer able to use my phone to connect to my home wireless AP. Even when WMWifiRouter is closed, it attempts to connect to the Ad-hoc network that it creates, and will not allow me to connect to my home wireless network. I tried removing the wifi settings for WMWifiRouter, only to find that it I do that, I have to reinstall the program to use it again.
Can anyone give me any suggestions as to how I might work around this issue? I know it's a beta, so there might be something there, but if anyone can help, or if anyone has gotten things to work with a similar setup, I'd appreciate it. Thanks
Is the website even up anymore? I went to it and it didn't even exist. Are they coming out with any new releases. I was also wondering if it would let us set out own WEP key
Absolutely, I JUST downloaded it yesterday...go wo www.wmwifirouter.com . And yes, it does allow the use of your own WEP key in the latest release. Can you comment on the issue I'm having?
Alternately, is there anyone who is using WMWifiRouter on their Kaiser who isn't having this problem? If so, how does yours work? What are your settings? Thanks
I don't know if this will help, but here's what I'm referring to:
It just constantly stays on connecting, and if I try to connect to another network, I get the error:
"Warning. Cannot connect to the network. Check your network and service provider and try again."
I just tried it on my Kaiser and was able to share the connection with a Dell laptop and Fujitsu tablet simultaneously. Speedtest.net showed speeds like 1120k down and 330k up. I set security WEP and could connect, but could not surf sites with I.E. but with settings changed to OPEN everything worked fine.
I too found that after I shut this down that my "normal" home wireless LAN connection would no longer connect. In fact the WiFi radio turned itself off when I turned it on and expected it to auto-connect as it did before. When I went into wifi setup on the Kaiser I found that my home connection was gone! I had to add back my home connection, re-config it's WEP settings and was then able to connect once again.
I also wonder what the "normal" behavior is supposed to be for this application when it's started. Should one be able to simply start WiFiRouter and it powers up the WiFi radio, ICS, and makes the phone ready for connections? I found that it would Not power up the radio on mine even though it seemed to claim that it was doing this.
I then tried launching WiFiRouter again and sure enough, it screws up my home access point connection profile every time by blowing away the settings and password.
I reported this on the WiFiRouter website.
Thanks so much for the reply. I just tried following the same procedure, and it worked out for me too. So weird that I actually had to delete my home wifi settings. It does work properly now though, and on my device, using DCS 1.7, it doesn't shut off my wifi when i disconnect/close the program. Thanks again for the help!
Well...sadly, my problem has cropped back up. Basically, the exact same thing is happening, but the fix that worked before is no longer working. I did get in touch with the makers, and they are aware of the problem and looking for a solution. If anyone else can help, that would be great. Otherwise, I'll try to post again if/when I get a fix. Thanks
You need to goto Wifi connections & deselect the WMWIFI AP. Then click & hold on your home AP & select connect. You may also have to turn of the DHCP in WMWIFI befor doing this, otherwise your other connections will try using it.
OK here's what I just sent to Jorrit at WiFiRouter when he asked for me to try a few things;
TEST-1 Start>Settings>Connections>WiFi "Networks to access" was set to "all available".
1-Ran WifiRouter (WFR), my wifi radio does not power up, WFR showing "Waiting for ICS and WLAN".
2-I manually powered up radio (using AnyButton Plus mapped to key).
3-WFR then connected, BUT it connected to my Home LAN. WFR's settings were set to "Force PC to PC Connection" but it connected to my AP anyway?
4-Disconnected WFR, waited a few seconds, pressed re-connect, it now properly "connected to WFR".
5-Pressed Disconnect, Pressed Quit.
6-Checked "network to access" settings, they were still set to "All available".
7-Checked wireless networks, Home LAN was still there and all settings were intact, WFR was there as well.
8-Manually powered On WiFi, instead of auto connecting to my home LAN, the radio powered itself off in about 1-2 seconds.
8-I manually powered WiFi On for the 2nd time, now I get "Cannot connect".
9-Checked wireless networks, WFR is at top of list with "Connecting" showing, Home LAN is below it, and checking it shows all settings gone.
10-I manually re-entered settings (Checked "this is a hidden network", and entered my WPA-PSK TKIP Key) and tapped "Connect". Then a dialog box opened asking for the network key again. I cancelled and the Home Lan entry disappeared from the Kaiser's network list.
11-With WiFi radio Off, I again created the home lan connection and set "networks to access" to AP's Only, Powered on the radio and it connected OK.
TEST 2 - With "all available" set, could it be the WFR is at the top of the list, and it "beats out" the normal home lan connection? Lets try AP's Only setting;
1-Left "networks to access" to AP's only and started WFR. It started normally (well, with the exception that I had to manually power up wifi) and when I checked wifi settings, "networks to access" had changed to "computer to computer" by WRF.
2-I disconnected WFR and Quit the program, it powered Off the WiFi radio, checked settings and it had switched back to "only access points", home lan was there, settings intact.
3-Powered up wifi radio expecting auto connect to home lan, No, wifi shut-off immediately again.
4-Powered up a 2nd time without touching anything, this time it connected to the home lan without issue.
So I'd say there are a couple of issues,
A-Why does the WiFi Radio shut down on the 1st attempt after quitting WFR?
B-Using "All available Networks" causes problems if WFR is at the top of the list?
C-I hate the fact that I'm the "only one who's TyTN II doesn't Power up the WiFi Radio when WFR starts"
They are working on it...
We think we have isolated the problem (once again the problem is WZC), patch should be forthcoming soon.
Chainfire said:
We think we have isolated the problem (once again the problem is WZC), patch should be forthcoming soon.
Click to expand...
Click to collapse
Wow, I hadn't expected a reply directly from you. Thanks very much. I appreciate your attention on this issue. If you have the time and might post when the patch is available, that would be great, otherwise, I'll be checking the the download site. Thanks again.
johnpwu said:
Wow, I hadn't expected a reply directly from you. Thanks very much. I appreciate your attention on this issue. If you have the time and might post when the patch is available, that would be great, otherwise, I'll be checking the the download site. Thanks again.
Click to expand...
Click to collapse
Patch will be available when it's done, can't say any more than that. We know what the problem is, but it will not be fixed easily, and the workaround is fairly complex, so it's hard to give a timeframe.
Oh, I wasn't asked for a release date, I was just hoping that you might post when it is released, whenever that may be. I really appreciate the effort you're putting into this, and totally understand that it's not a simple fix. Thanks again.
I have a different problem. I used this program and now I cannot use internet share using my tilts normal data. Very confused and now haven't had internet at home for over a week now. Does anyone know how to fix this?
I can see how that could be annoying. Please see this post: http://forum.xda-developers.com/showpost.php?p=1801366&postcount=158. Ignore the content, just download the file, unzip it, run the EXE on your phone. It will create two files, post those here, and maybe I can find out what the issue is.
Hey everyone,
Just did the bootloader unlock and everything turned out fine. Unfortunately, however, my Rezound will not connect to anything wi-fi, 3g, 4g, etc. I get the feeling that this isn't normal, so if anyone has tips for helping me out, it would be much appreciated. Thanks!
Don't mean to be rude but this is not the place for questions... anyway, have you made any modifications... have you frozen any apps? uninstalled any apps? certain apps are required for connectivity.
Sorry about that, then. But to answer, no. Perhaps it is just the hour-long connection originally required? I am not sure. I imagine I can still do everything I need to do, though, regardless of having a connection. Just sort of worries me. Making sure I didn't mess anything up.
Edit: When looking at my phone's settings, I am unable to select Mobile Network because it says either, "Network Unavailable" or "Use phone for data connection when Wi-Fi is unavailable" (despite wi-fi being turned off).
Zoolu.Taylor said:
Sorry about that, then. But to answer, no. Perhaps it is just the hour-long connection originally required? I am not sure. I imagine I can still do everything I need to do, though, regardless of having a connection. Just sort of worries me. Making sure I didn't mess anything up.
Edit: When looking at my phone's settings, I am unable to select Mobile Network because it says either, "Network Unavailable" or "Use phone for data connection when Wi-Fi is unavailable" (despite wi-fi being turned off).
Click to expand...
Click to collapse
I'm not sure what u mean by "hour long connection required".
Go to settings > wireless & networks ... check only "Mobile Network" no other check boxes > click "Network Settings" ... make sure "always-on...data" is checked > click "Network Mode" make sure "LTE/CDMA" is checked... see if you get a connection, if not reboot
So more detail in your issue might help others figure out what he problem with your phone is. When did you lose data, after unlock? did you root? was unlocking successfull? did you have data before unlocking? did you flash a recovery/rom?
Apparently all it needed was a SIM reset, because once I pulled it and replaced, 3g came back and then 4g shortly thereafter. All is right in the world.
Hi all. I have a weird issue that after Googling it doesn't seem anyone else has had.
The issue started earlier today, in the morning. I was using my phone on the WiFi and it was working phone, then my phone crashed, restarted itself.
I noticed it wasn't connected to the WiFi, went to the WiFi settings and where it usually says the list of networks it said "Turning on WiFi" and the slider at the top was greyed out so I couldn't turn it off.
I tried airplane mode and that didn't help. But the phone was working fine on my mobile data so restarted.
Now the weirder part starts. I basically have an issue where, if I turn on the WiFi, my phone crashes, or doesn't act like it's turning the WiFi on.
Even going Settings and then pressing on the WiFi option freezes the phone.
The problem started when I was still using 4.4.4 however since the problem developed I've used my mobile data to download the updates and now have 5.1.1 I think.
The problem persists even after updating to the most recent version and doing a factory restore. The phone is currently completely stock with nothing downloaded on to it. All I did is go through the first time setup for the device.
The WiFi currently is off, and the phone is working however it won't connect to my data, it has the signal bars and then an ! instead of a 4G icon.
If I try to turn the WiFi on it crashes the phone.
The phone is still under warranty so I plan on contacting LG on Monday however it's currently 3:34 AM on a Sunday so I have a day until I can call them and was hoping for a solution in that time.
Thanks in advance. I have the phone to hand so anything you want me to test I'm able to.
There is some information I didn't type as I don't know what is important was trying to avoid a wall of text so if you have any more questions I'll answer I best I can.
Thanks for reading, I hope you can help!
It's been a while since I had to do this, so I don't remember how it worked. I had to reset my phone and not use any of my back up settings. I think something was corrupt, so I wanted to do a clean install. But my question is, do I have to connect to my home wifi a certain number of times, until the phone automatically turns wifi on and off respectively? Before, my Note 10 Plus, used to do this, but right now it's not. It's only been 2 days since I wiped my phone.
I DO have:
"Turn on Wifi automatically" ON
"Switch to mobile data" ON
"WiFi power saving mode" ON
Thanks for your help in advance!
Yes as you keep reconnecting to a particular wife it will eventually offer to add to auto connect list
Thanks raul6, I cohosh remember, it's been so long.. Lol
Sent from my SM-N975U using Tapatalk