I got a kinda damaged lava phone from my friend but it does not boot. It will go into the recovery and the fastboot fine but it wont boot. It freezes at the benco logo so my first resort was to flash the stock rom through adb sideloading but i cant get a single rom from the internet (Everything needs to be paid or is password protected). So if anyone could help me, it would be much appreciated
Related
I have a Atrix 2 MB865 which is not a AT&T phone.. It was on ICS before..I rooted it,flashed custom recovery and everything went smooth till here.Then I tried to flash carbon 4.3 unoffical rom through CWM recovery.. Got a message that flash was a success but when I rebooted I got stucked in bootloop.. I tried flashing a stock rom using RSD lite in fastboot mode but everytime it get stucked at "7/20 rebooting cbt.bin fail".. Any help will be greatly appreciated.
Recovery mode is not working and phone is opening is just fastboot mode and no matter what stock rom I flash (ICS or GB) it is stucked at that 7/20 rebooting step and I get a FAIL message... again I say any help will be really appreciated.
EDIT:I can enter stock recovery... will this help???
The above scenario was my problem yesterday and after a lot of browsing and understanding the basic concept I was able to recover my phone.I want to thank to all the Atrix community group for helping me out and providing very good and accurate set of instructions. For me I come from a samsung background so dont have any much knowledge about Motorola chipset but again thanks for the helpful threads/post I was able to recover my phone.
SO THIS IS HOW I RECOVERED
As I mentioned in the above scenario that I was able to enter in fastboot and Stock recovery mode but flashing a stock rom (no matter ICS or GB) wont work because flashing failed in RSD LITE (7/20 Reboot cbt.bin FAIL).
I had drivers and I had antivirus turned off and I have met the every requirement that is favourable for RSD lite to flash stock rom package to my MB865.
Then I saw this THREAD,all thanks to @alteredlikeness.
He proposed a menthod of flashing firmware without using RSD Lite and it WORKED!!!!:victory:
He provided a batch file package and told to extract in your FXZ folder(extracted Stock Rom folder).
As told the device must be connected in fastboot mode to PC and then the batch file should be run ... I followed all the instructions carefully and took a while to run the batch file but in the end it flashed everything and I recovered my phone.
Just in case if anyone has met the above mentioned problem try this method .. It seems to be working for both AT&T and NON AT&T MB865 phones.
hey every one 2 days back i was able to flash lewa os rom on my canvas 2 .. when i found this updater in apps i downloaded the update of that rom i think it is called O.T.A.. i went to recovery mode and flashed it ..i flashed that update with out enabling usb debugging ..
NOW I BRICKED MY PHONE all i am able to see is a boot logo all the time like it restarts and shows that boot logo i am unable to boot into recovery or factory mode.. i have been trying to unbrick it for hours and days as its the only phone i have .. please help me out of this cant install the drivers or my pc wont recognize the phone it ends up unable to install usb .. am really worried i cant buy an other phone please any one help me out of this .... i want to solve it solve it asap as i have no other phone to use please .. I CAN'T ENTER DOWNLOAD OR RECOVERY MODE OR ANY OF IT WHEN I TRY TO ENTER RECOVERY MODE WHAT IT DOSE IS JUST RESTARTS AND SHOWS THE LOGO AGAIN AND AGAIN... PLEASE HELP ME OUT OF THIS
Try flashing Stock JB ROM by Paplu using SPFlashTools.
http://forum.xda-developers.com/showthread.php?t=2167244
I never flashed LeWa OS but don't Update Over the Air (OTA) as it might be downloading the update for that device (as it a ported ROM (I think)) the ROM was actually made for.
And don't worry. All of us had bricked devices at some point of time.
I prefer you use SPFlashTools on a Win 7 PC as drivers are a bit complicated to install on Win 8 as they are not signed. After that, download CWM img and flash it using SPFlashTools (tutorial to flash just recovery is also given or you ask if you are not able to do it) as recovery flashed through Mobile Uncle Tools also doesn't boot after factory resets and a couple of more situations.
I can't access to my custom recovery screen .... I am using micromax A-89 ninja ,,. When i m trying the right combinatins to enter the recovery screen (i.e. power button + vol. Up button ) but i m not able to get into it .,. I used it many times before... And after rooting my device also used the recovery. But i tried to install a custom and i was unsuccessfully in installing any other custom recovery tool. I tried using boot manager to install the custom rom (s5 for A89) but there i was unabe to get into my c.r. screen ., it stucks on logo and automatically reboots my phone again.
Plzzzzzzzz help me .
Is this a soft brick or anything else.... I m able to use my phone perfectly but cant enter the recovery tool.
Help me.
segrecurs said:
I can't access to my custom recovery screen .... I am using micromax A-89 ninja ,,. When i m trying the right combinatins to enter the recovery screen (i.e. power button + vol. Up button ) but i m not able to get into it .,. I used it many times before... And after rooting my device also used the recovery. But i tried to install a custom and i was unsuccessfully in installing any other custom recovery tool. I tried using boot manager to install the custom rom (s5 for A89) but there i was unabe to get into my c.r. screen ., it stucks on logo and automatically reboots my phone again.
Plzzzzzzzz help me .
Is this a soft brick or anything else.... I m able to use my phone perfectly but cant enter the recovery tool.
Help me.
Click to expand...
Click to collapse
I'm a little bit confused on what you've posted but I will try to help. First I need a little bit more detail as did you Install a custom ROM but you were not succesfull and since then you have not been able to get into recovery or did you try to install a custom recovery and were unsuccessful?
If it is the latter then you will need to succesfully flash a recovery (Stock or Custom) in order to enter this section of the device, if it is the first then I would recommend attempting to reflash the devices stock firmware and starting from the beginning as it appears for both of these potential scenarios that the custom recovery is corrupted or is getting stuck when loading a particular section to work.
I didn't understood. Please guide me for my next step. Weather i should go for firmware or to install a cwm.
i tried to install custom recovery on my device
segrecurs said:
i tried to install custom recovery on my device
Click to expand...
Click to collapse
Are you able to boot normally into android OS..or is it just powering off automatically or is it happening when you try to go to recovery
If you can boot normally into android its not a softbrick but you might get one
Follow this thread http://forum.xda-developers.com/showthread.php?p=38110405#post38110405 if you want to install CLOCK WORK MOD RECOVERY using a computer if your phone doesn't boot...? No worries
DONT FORGET TO THANK THE HARDWORKERS
i m sorry to say but my phone just got hard bricked......now it stuck on the boot logo.....
help me
plzzzzzzzzz
NEEED help plzz..
i got my device into bootloop. i am using micromax a 89. i got stuck in boot loop and i cant enter in my stock recovery. is there any other way to get out of this. plz tell me
hii ,i am sainitish
i have a china MTK tablet runs on android 4.2.2(jellybean)
recently i flashed a custom ROM in it but the ROM is not made for that!! using CWM recovery.
then the device show flash successful message.but when i turn on the device it got stuck on boot logo.
so i removed it and flashed another rom in it but this ROM also not made for my device!!
and again same thing happen with second ROM also i got stuck on boot logo.
so i frustrated so without flashing anything i accidentally removed the current not working ROM and CWM from my device.
so now i came to risk i dont have any rom or recovery flashed on my device.so now i am not even able to flash my backed up stock rom on my device.so my device got dead now.
ITS JUST CHARGING,POWERING ON AND SHOWING A DUMB BLACK BLANK SCREEN AND EVEN NOT POWERRING OFFF BACK(SO I NEED TO USE THE RESET BUTTON ON MY DEVICE TO MAKE IT TURN OFF)
CAN ANYONE PLS PLS HELP ME TO MAKE IT WORK.PLEASEEEEEEE!!
sainitish said:
hii ,i am sainitish
i have a china MTK tablet runs on android 4.2.2(jellybean)
recently i flashed a custom ROM in it but the ROM is not made for that!! using CWM recovery.
then the device show flash successful message.but when i turn on the device it got stuck on boot logo.
so i removed it and flashed another rom in it but this ROM also not made for my device!!
and again same thing happen with second ROM also i got stuck on boot logo.
so i frustrated so without flashing anything i accidentally removed the current not working ROM and CWM from my device.
so now i came to risk i dont have any rom or recovery flashed on my device.so now i am not even able to flash my backed up stock rom on my device.so my device got dead now.
ITS JUST CHARGING,POWERING ON AND SHOWING A DUMB BLACK BLANK SCREEN AND EVEN NOT POWERRING OFFF BACK(SO I NEED TO USE THE RESET BUTTON ON MY DEVICE TO MAKE IT TURN OFF)
CAN ANYONE PLS PLS HELP ME TO MAKE IT WORK.PLEASEEEEEEE!!
Click to expand...
Click to collapse
Just download ur stock rom and flash it with SP flash tool
Hi guys, i need your help!
i will try to explain the situation at my best.
A couple of days ago i decided to go back from a custom ROM to the Stock one via TWRP flash and i ended up with a soft brick, later i managed to flash the stock rom with SP Flash tool.
Yesterday i tried to get ROOT access on the fresh installed stock rom and considering that i wasn't able to get ADB and Fastboot to work properly on my pc (at the time) i used King Root, after that i tried to install TWRP through the official app, the result was not successful (the problem was the locked bootloader) and i found myself without recovery (neither TWRP or Stock).
Here comes the last part (the tricky one)
after all this mess I managed to get ADB and Fastboot to work and i obviously tried to unlock the bootloader, unfortunatly i hit "boot to recovery" and now i'm stuck with a boot loop with no recovery.
if i try to get to fastboot with Vol down+Power the phone shows the LeEco Logo and then the screen shuts down.
Sp Flash tools doesn't work either.
Any possible solution?
The thing u got wrong is that... U should have flashed twrp on either eui 5.8.17s or 5.8.19s...
Don't flash it on 14s or lower eui version ... It might get stuck on bootloop