Related
I'm wondering if this is because of my device (HTC Titan) or because of WM6... all I know is that I never had this happen before!
Basically, I'll pull out my phone sometimes and find that its turned on by itself, and has been sitting with the dim idle backlight on.
I noticed it can be caused by several things but the 2 main ones I've seen is:
1) when the phone switches to/from roaming, it wakes up
2) when using A2DP controls (AVRCP), it wakes up.
I've been using workarounds to keep the backlight off for now (set the phone to roam only, or carrier-only, so it won't be switching in/out of roam, and use core player or just remember to toggle the screen off everytime I use a media AVRCP control), but there has got to be a better way to keep the darned screen off until I press power!
Anyone have any suggestions? This is really an unexpected annoyance as it eats up my battery quickly not knowing its on...
I had a similar issue with whenever I received an email and didnt shut off the device manually. What I eventually ended up doing was setting the device to automagically lock when it was powered off, and this seemed to solve the issue. I'm not sure however if this will fix it in your case because locking it may interfere with AVRCP controls working.
I use Tasker for automating a lot of redundant tasks on my phone. I figured I would post a couple I'm using with hope that others will share with me some stuff they use it for.
action: Docked.
Tasks done when docked: Bluetooth on, wifi off, gps on, auto brightness set off [if time < 1800, Display Brightness set to 255 if time < 1800, pandora set on.
exit tasks: Bluetooth off, auto brightness on if TIME < 1800, pandora set off, gps off.
Action open Application Maps/Nav or any gps app.
Tasks done: GPS on
exit tasks done: GPS off.
action: phone face down
Tasks done: airplane mode on if time < 2200, all sounds off except for alarm
exit tasks: airplane mode off, all sounds revert to previous settings.
these 3 i use, if you have any others let me know. If you need help with the program let me know too.
here is where you can grab tasker.
http://tasker.dinglisch.net/
Sounds something that I would definitly use. I beleive its a paid app, but still worth it. I'll look into it. Does it have settings for wifi e.g.- 1 touch WIFI on, because i'm using the stock wifi on/of toggle but I then have to go into wifi settings and actually see my phone connecting to my network in order for i to work and turn on.... ??????
Yeah there are settings for connecting to wifi. Mine does it automatically when I get home based on the gps. Works most of the time, had to turn it on manually a couple times because the gps wasn't on.
generic.imitation said:
Action open Application Maps/Nav or any gps app.
Tasks done: GPS on
exit tasks done: GPS off.
Click to expand...
Click to collapse
How do you set up an OR for the app launch context? I'm trying to get it to turn on GPS when I open Maps, Foursquare, Yelp, or Places, but it doesn't let me multi-select apps and if I add a context, Application isn't there.
Make it separate tasks.
make 1 for each app.
Foursquare - turn on gps. Turn off gps when exit.
Ect.
also, I guess there is a wiki with a bunch of samples I guess. I'm out at a remote beach on northern oahu right now, but if someone doesn't post it before me I'll post the link when I get home.
generic.imitation said:
Make it separate tasks.
make 1 for each app.
Click to expand...
Click to collapse
Yeah, that's what I've been doing. It'd just be nice if you could have conditionals in the context. IF Yelp OR Foursquare OR Maps OR Places then ...
Post over there and make a feature request, they should put that in I agree .
Just bought Tasker and so far I like it. Can't seem to figure out how to do the following task though.
I need to set to static IP when on a certain wifi connection. I already have the IP set and the only thing that will need to be done is to toggle the static IP checkbox in the advanced setting of wifi. I know how to specify the wifi network but how can I make it toggle that checkbox/setting?
Thanks for any info.
i made a simple widget to toggle the screen brightness to two preset brightens for inside and direct sunlight.
i could not find an app that let me choose the brightness, they either made it full dark/bright.
i can't work out however to toggle a different widget icon to indicate on/off...
i've tried set icon but with no luck
its not really needed but would be good to have/know for future apps
also, can anyone explain how the HTTP (get info from net) works?
i want to try a few things but not really sure how it works
This app is the best app on the market... hands down. #Win
generic.imitation said:
Yeah there are settings for connecting to wifi. Mine does it automatically when I get home based on the gps. Works most of the time, had to turn it on manually a couple times because the gps wasn't on.
Click to expand...
Click to collapse
You should use "wifi near" as a condition instead of "gps". That way it just toggles you wifi on and off periodically and if it is near... it will connect.
Gps is so demanding on the battery... and not always accurate... as you see
I set mine up so whenever I plug in my headphones my music app opens
Sent from my DROIDX using XDA App
ichigopow said:
I set mine up so whenever I plug in my headphones my music app opens
Sent from my DROIDX using XDA App
Click to expand...
Click to collapse
I set my heaphones the same.. but at the same time, it cuts my media volume up (in case it was down) and when I unplug them... it returns my media volume back to it's previous value
MrDanger said:
I set my heaphones the same.. but at the same time, it cuts my media volume up (in case it was down) and when I unplug them... it returns my media volume back to it's previous value
Click to expand...
Click to collapse
I do the same except my volume goes down when I plug them in so I don't have music blaring in my ears.
Sent from my DROIDX using XDA App
I also have a profile that texts my gf a random message at a random time that is between 7:30 am and 7:40 am (so she don't think it's automated lol) every morning. I got that idea from LexusBrian
Again.. great app!
Here was I have got going on with tasker.
Car dock: gps on, bluetooth on, display always on, notification volume off. On exit they all do the opposite.
When home: wifi on. Exit wifi goes off.
At work: phone goes to vibrate for everything.
10pm to 545am: phone goes quiet.
I second it a best app ever. Wifi, gps, and bluetooth are never on when I don't need em. Come on you can't beat that. What a battery saver.
Sent from my DROIDX using XDA App
Tasker is an incredibly handy utility.
Here's the profiles I use:
GPSonForLocationApps - I think this one has already been covered by this thread.
WifiOnAtHome - I use the wifi near option... although I think it's causing issues with my 3G signal... it will occasionally turn on wifi to check if I'm at home which seems to turn off 3G. Still playing with this one.
LowVolumeDuringWorkHours - sets various volumes appropriately so I can still hear stuff but doesn't annoy folks working near by. I turn this on/off based on day of week and time of day. Upon exiting this profile it returns my volumes back to normal.
NoficationsOffAtNight - I turn off notifications at night and if my phone is plugged into AC.
SilentForMeetings - if I have a calendar entry where I'm marked as busy it turns my phone to silent mode.
Openwatch?
Hello
I am new to Tasker, and I'm starting to understand exactly how much you can do. Uses open watch a lot and have done a lot of settings to make my clock better. But I wonder if I can get messages from one app to my watch. The app is an ice hockey results service. And each time it becomes a goal, I get it as income message in the status bar. But can I get the message in the clock at the same time? Right now I just get a message in the watch which I've written, but would like it says in the status bar so you do not I pick up the phone to look at the result. Is there perhaps a few codes to enter, instead of my message is? Hope you understand me?
I have mine set to enable WiFi when I connect to a certain cell tower. Keeps the drain on my batter to nothing more than it was already at, and GPS is only enabled for about 5 minutes to and from the house. I'm sure the drain for that combined 10 minutes is much less than periodically checking the GPS or if a network is near.
I am turning off gps when I get to my home cell tower and turning on my wifi at the same time.
For my multimedia apps like pandora, I have my screen stay on when plugged to a power source.
Sent from my DROIDX using Tapatalk
Didn't see a thread for this so I thought i'd start one.
Anyone use this app to automate? Been using it for a few weeks and love it.
Here are some of the profiles I've created/been using.
- Headset = when inserted, pop up a menu of apps. When removed, kill said apps and mute media volume
- Calender = silent the phone when I am in a meeting (entry = busy)
- Work = Turn down all volume/notifications while i'm at work (730-400, M-F)
- Home = When home, turn on WiFi. When i leave, turn it off
- Power = when charging, pop up a menu for which power mode: night, charge, USB, or Car. Perform tasks depending on which mode is used
- Movies = when at the movie theater, silent completely. Turn volume on when I leave
- Night = Turn on Airplane mode when sleeping, on every 15 minutes to sync in data
Anyone else have any good profiles to share??
I turn on GPS when "My Tracks" is launched...
I created a Task to turn GPS on and then launch Navigation. Then I added a shortcut to that Task w/ the Navigation to icon...
I turn my phone to vibrate when I'm near work networks...
Silence my phone and turn off data-sync from midnight-7.
I've been trying to make a profile that will shut off my WiFi when I go out of range and disconnect, but I can't get it to work properly.
I really don't know why Android will let you keep you WiFi on when you're not connected for an extended period of time.
Tasker
I use a few.
1] Kill 3G, launch wifi when at work or home. Autoconnect.
2] Set security flag when NOT at work or at home
3] If security flag is OFF, PIN is OFF on device boot.
4] On receipt of SMS, play a longish sound so I can find it.
5] If I can't find it, different SMS turns off WiFi, turns on GPS and 3G, waits for GPS, and responds to me with location via SMS. Also engages high volume setting.
6] If I don't like where it is, yet another SMS will initiate a lock sequence. This silences all alerts, sets the security flag on, and times out the screen. Then, wakes the device up with a message with my email and a nice request to return, sends me the GPS location again via SMS, and begins to popup a lock screen via Tasker every six seconds. The lock screen can be bypassed, but on reboot the device will require a PIN to access as the security flag will be set.
Now, you might say- why not use a task killer or uninstall it? I thought about that. If i'm not at home or work (within 50meters) all programs that are capable of installing, uninstalling, modding, or killing are PIN locked. NICE!
heliotropeUCSD said:
I use a few.
1] Kill 3G, launch wifi when at work or home. Autoconnect.
2] Set security flag when NOT at work or at home
3] If security flag is OFF, PIN is OFF on device boot.
4] On receipt of SMS, play a longish sound so I can find it.
5] If I can't find it, different SMS turns off WiFi, turns on GPS and 3G, waits for GPS, and responds to me with location via SMS. Also engages high volume setting.
6] If I don't like where it is, yet another SMS will initiate a lock sequence. This silences all alerts, sets the security flag on, and times out the screen. Then, wakes the device up with a message with my email and a nice request to return, sends me the GPS location again via SMS, and begins to popup a lock screen via Tasker every six seconds. The lock screen can be bypassed, but on reboot the device will require a PIN to access as the security flag will be set.
Now, you might say- why not use a task killer or uninstall it? I thought about that. If i'm not at home or work (within 50meters) all programs that are capable of installing, uninstalling, modding, or killing are PIN locked. NICE!
Click to expand...
Click to collapse
I like the security flag and locking. Great idea. I'm going to have to try and set that one up.
Currently I,
1. Turn on WiFi at home and off when I leave.
2. Turn off email checking at 11pm and back on at 5am
3. Turn on GPS when Maps is opened.
4. Launch Sirius when headset is plugged in (the only time I use the "headset" is an aux cable into my car stereo.
rmoney said:
I've been trying to make a profile that will shut off my WiFi when I go out of range and disconnect, but I can't get it to work properly.
I really don't know why Android will let you keep you WiFi on when you're not connected for an extended period of time.
Click to expand...
Click to collapse
you can either use the 'wifi near' profile, or use gps as a location and turn on/off wifi based on that location.
i prefer the gps. the time between checks can be set in tasker as well. I really don't notice the battery kill and keep wifi/gps on while i'm at home...off at work
hope it helps!
MMBosstones86 said:
you can either use the 'wifi near' profile, or use gps as a location and turn on/off wifi based on that location.
i prefer the gps. the time between checks can be set in tasker as well. I really don't notice the battery kill and keep wifi/gps on while i'm at home...off at work
hope it helps!
Click to expand...
Click to collapse
About how long do you have between GPS checks, so that I'll have a rough estimate of what doesn't kill the battery too fast?
Θmega said:
About how long do you have between GPS checks, so that I'll have a rough estimate of what doesn't kill the battery too fast?
Click to expand...
Click to collapse
pretty sure i have it to whatever tasker defaults as. Maybe a minute or two longer. GPS doesn't touch the battery unless its working (you see the satellite). Give it a shot and see how it works. If you don't like it, it can be changed easily
MMBosstones86 said:
you can either use the 'wifi near' profile, or use gps as a location and turn on/off wifi based on that location.
i prefer the gps. the time between checks can be set in tasker as well. I really don't notice the battery kill and keep wifi/gps on while i'm at home...off at work
hope it helps!
Click to expand...
Click to collapse
Yeah I was trying not to use gps, don't care about connecting to WiFi, just don't want it to still be polling for a signal when I forget to turn it off.
rmoney said:
Yeah I was trying not to use gps, don't care about connecting to WiFi, just don't want it to still be polling for a signal when I forget to turn it off.
Click to expand...
Click to collapse
if you use wifi near, it'll turn on wifi to check every few minutes.
gps is set to poll 2 minutes when the screen is on, 10 minutes when screen is off. I find no problems with it on the battery
I know, but I'm not near WiFi often enough to bother connecting. I just want it so that the occasional time I do connect that when I forget to turn it off when I leave the area it doesn't stay on for the next hour till I notice.
heliotropeUCSD said:
5] If I can't find it, different SMS turns off WiFi, turns on GPS and 3G, waits for GPS, and responds to me with location via SMS. Also engages high volume setting.
6] If I don't like where it is, yet another SMS will initiate a lock sequence. This silences all alerts, sets the security flag on, and times out the screen. Then, wakes the device up with a message with my email and a nice request to return, sends me the GPS location again via SMS, and begins to popup a lock screen via Tasker every six seconds. The lock screen can be bypassed, but on reboot the device will require a PIN to access as the security flag will be set.
Click to expand...
Click to collapse
I'm not sure how to set this up. Could you please explain how you did this?
Thanks!
I have a bunch... we need to figure out how to share the code for these...
Quiet night: Silent, wifi off, sets a variable that i am in sleepmode
Sleep mode emergency calls - if sleepmode is no, turns it off and lets it ring only on calls from certain numbers
Meeting silent: silent mode when I am in meetings
Face down silent: ****s it up if i turn it face down
Low battery: notifies me, turnjs off wifi and gps, drops brightness, switches to vibrate
Home: turn off gps, turn on wifi
No Keyguard: turns off keyguard and leaves on display when plugged in
Work: wifi off (security at work), drops volume on everything,
@mianthropic777 - something to note on your low battery profile. Vibrate actually uses much more energy than audible ringers. Might want to switch that one up
rmoney said:
I know, but I'm not near WiFi often enough to bother connecting. I just want it so that the occasional time I do connect that when I forget to turn it off when I leave the area it doesn't stay on for the next hour till I notice.
Click to expand...
Click to collapse
I made a profile to turn wifi off one minute after the phone sleeps. It's an event so the wifi will not turn itself back on. I also made a widget to disable it incase I'm using the wifi to download a file.
how do you make a profile that silences and responds to sms's at movies?
I mean how does it know when you are at a theater?
Can you make a widget to turn this mode on with a touch of the widget?
Thanks
You could easily make a widget to do this for you, or you could set a gps location for your theater to do it automatically.
I've got a few that haven't been mentioned:
- When connected to my home wifi network, keyguard pattern is disabled
- Whenever I answer an incoming call, in-call volume automatically set to 1 (I have some loud obnoxious friends)
- When phone placed face down, switches to vibrate mode and gives me a single short vibrate to confirm. Also screen timeout switched to 7 seconds (shortest possible). Exit task (when phone flipped back up) reverts to whatever ring mode it was in, and gives 2 short vibrates to confirm
- When I launch Pandora, media volume automatically set to 1
Solomente said:
I've got a few that haven't been mentioned:
- When connected to my home wifi network, keyguard pattern is disabled
Click to expand...
Click to collapse
It says keyguard pattern is not available for my phone, why?
(yes I have an Incredible)
I have it set to turn in airplane mode while im in school (high school 8-3) and check for messages every thirty minutes.
Saves the hell out of my battery. I leave around 6:30 in the morning and get home around 7:30 at night...usually have about 40% when I get home.
Sent from my Rooted Froyo Incredible using Tapatalk
The wifi icon disappears after few minutes of screen being off after locking. I did set wifi to be on during sleep. Does anyone else have that issue ? I have a SIP client installed on my phone and need wifi all the time so that is a pain.
Mine does the same thing. I think it might be because I have the *intelligent power saving* checked in "power management" in settings. I think the phone disables data every so often to preserve the battery. Haven't tested my theory by un-checking, but I remember this happening on my Blu studio energy.
I have intelligent power disabled.
I think I am getting this on my phone. Sometimes on wakeup it forgets it is connected to Wifi and apps and chrome won't update. I usually just turn airplane mode on/off to fix it. Still, it is annoying. Doesn't seem to happen with LTE, at least.
Having some issues with tasker on the pixel 3. I had the pixel 1 with android pie and had no issues. I migrated my profile and the tasks work if i play them manually but don't seem to work automatically 99% of the time. They also show green as if they should be active. It seems to have something to do with having the screen off. I have battery optimization turned off for the app and I have messed around with a few other settings. Does anyone know the magic combination to get it working? Or any idea what else may be wrong?
Example screnario...I get into my car, bluetooth connects, i wait and pandora doesnt turn on. I unlock the phone and go into tasker, the profile is green as if it is active but Pandora isn't playing. I then open the task and hit the play button and everything works as it should.
I can live without most of my tasks but I really miss Pandora automatically playing and exiting when connected to my bluetooth.
EDIT: My other tasks are hard to verify they aren't working. It seems that they may be working some/most of the time but Pandora has yet to launch while the screen is off. I have smart lock enabled so the phone should unlock when connected to my bluetooth.
huviduc said:
Having some issues with tasker on the pixel 3. I had the pixel 1 with android pie and had no issues. I migrated my profile and the tasks work if i play them manually but don't seem to work automatically 99% of the time. They also show green as if they should be active. It seems to have something to do with having the screen off. I have battery optimization turned off for the app and I have messed around with a few other settings. Does anyone know the magic combination to get it working? Or any idea what else may be wrong?
Example screnario...I get into my car, bluetooth connects, i wait and pandora doesnt turn on. I unlock the phone and go into tasker, the profile is green as if it is active but Pandora isn't playing. I then open the task and hit the play button and everything works as it should.
I can live without most of my tasks but I really miss Pandora automatically playing and exiting when connected to my bluetooth.
EDIT: My other tasks are hard to verify they aren't working. It seems that they may be working some/most of the time but Pandora has yet to launch while the screen is off. I have smart lock enabled so the phone should unlock when connected to my bluetooth.
Click to expand...
Click to collapse
Check to see if accessibility is enabled for Tasker. If memory serves me correctly it needs to be enabled in order to launch an app. I might be wrong about that but it can't hurt to try it. Android settings>accessibility
robocuff said:
Check to see if accessibility is enabled for Tasker. If memory serves me correctly it needs to be enabled in order to launch an app. I might be wrong about that but it can't hurt to try it. Android settings>accessibility
Click to expand...
Click to collapse
I checked and it wasn't enabled. Enabled it but unfortunately the same issue happens. If i have the screen on everything works perfectly fine, screen off nothing happens. I am using always on display if that matters, its the only difference from my pixel 1 setup but I don't see why it would matter.
I also tried clearing all app data, uninstalling, reinstalling and setting up the pandora profile from scratch. Its such a simple task, I don't see why it isn't working. Profile below, selected options in parenthesis.
BT Connected (bluetooth device name) -> Pandora (Launch App Pandora)
Did you select the BT device from the list by tapping the magnifying glass? I have found that if I pair a device the name is the same but the profile won't work until I remove and add it again. Also, some have different modes. For example, my Bose BT headphones pair as "Bose SoundSport" initially, but then connect as "LE Bose SoundSport" after that, so profile trigger has both listed.
Another test I would do is to change the task actions to see if it's actually triggering the profile or if it's an issue with the task. I usually just do Alert > Flash and watch the screen when the profile should be triggering. If the flash works, something isn't working with the launch app action.
Hope this helps.
Edit: I guess I didn't clarify, the task I have with my Bose headphones launches Spotify and starts music (media control > next). It also sets the media volume to a comfortable level. The criteria for this profile is a variable (based on calendar to see if I'm at work or not) and BT connection.
I forgot it was there, but I use Secure Settings to wake the CPU when the task triggers. Not sure if this is still needed or not. I think it was needed at one point to launch with the screen off or something, but I haven't really changed this task for a few years other than updating the BT device name as described above.
fury683 said:
Did you select the BT device from the list by tapping the magnifying glass? I have found that if I pair a device the name is the same but the profile won't work until I remove and add it again. Also, some have different modes. For example, my Bose BT headphones pair as "Bose SoundSport" initially, but then connect as "LE Bose SoundSport" after that, so profile trigger has both listed.
Another test I would do is to change the task actions to see if it's actually triggering the profile or if it's an issue with the task. I usually just do Alert > Flash and watch the screen when the profile should be triggering. If the flash works, something isn't working with the launch app action.
Hope this helps.
Edit: I guess I didn't clarify, the task I have with my Bose headphones launches Spotify and starts music (media control > next). It also sets the media volume to a comfortable level. The criteria for this profile is a variable (based on calendar to see if I'm at work or not) and BT connection.
I forgot it was there, but I use Secure Settings to wake the CPU when the task triggers. Not sure if this is still needed or not. I think it was needed at one point to launch with the screen off or something, but I haven't really changed this task for a few years other than updating the BT device name as described above.
Click to expand...
Click to collapse
Thanks for the input! I am heading out of town for a few days but I'll look into your suggestions when i return ( i wont have my car with me so i cant do any testing). I do think the profile works because it shows as green when i turn my screen on and open tasker. It also works perfectly fine if i have my screen on then start my car.
I think it may be working now (successfully tested one time) but I will need to use a bit more to be sure. The only thing I noticed is when reinstalling, i was prompted to allow the application to run in the background and chose yes. When the app was transferred from my old phone and I imported the backup, i dont recall ever getting this prompt. Not sure where this setting is found other than at the prompt. I will report back once i am home and can test some more.
okay so it doesn't appear to be working still. The task works fine when played manually, the profile runs the task successfully when the screen is on/off/locked. It does NOT work after phone has been idle for a while. I have battery optimization off for Tasker and when I check battery usage, I can see that tasker runs all day long. I have another task to dismiss email notifications at work and it works fine when the phone is idle.
Starting to test it with different actions like turning on the screen but I'm running out of ideas. Only other thought it Adaptive Battery....not very familiar with it.
huviduc said:
okay so it doesn't appear to be working still. The task works fine when played manually, the profile runs the task successfully when the screen is on/off/locked. It does NOT work after phone has been idle for a while. I have battery optimization off for Tasker and when I check battery usage, I can see that tasker runs all day long. I have another task to dismiss email notifications at work and it works fine when the phone is idle.
Starting to test it with different actions like turning on the screen but I'm running out of ideas. Only other thought it Adaptive Battery....not very familiar with it.
Click to expand...
Click to collapse
Can you verify if the task runs at all? In other words, does Tasker successfully see the BT connection and activate the profile and the only thing that fails is Pandora playing?
If the profile actually kicks in, then it sounds like the phone needs to 'wake up' more before the Pandora action works.
I have a morning profile (runs based on time of day) that I had to add a wake screen step to to have all the actions work (I don't actually remember which action wasn't working -- it may have been that it didn't seen to run at all). I currently use the old Secure Settings plugin to do the screen wake because when I tried which auto- app has a screen wake action it didn't work.
piccit said:
Can you verify if the task runs at all? In other words, does Tasker successfully see the BT connection and activate the profile and the only thing that fails is Pandora playing?
If the profile actually kicks in, then it sounds like the phone needs to 'wake up' more before the Pandora action works.
I have a morning profile (runs based on time of day) that I had to add a wake screen step to to have all the actions work (I don't actually remember which action wasn't working -- it may have been that it didn't seen to run at all). I currently use the old Secure Settings plugin to do the screen wake because when I tried which auto- app has a screen wake action it didn't work.
Click to expand...
Click to collapse
This leads me to believe the bit I added for Secure Settings to wake CPU is what makes it work any time? The profile I have is very similar; %ATWORK = TRUE && BT connected to Bose SoundSport. Secure Settings wakes CPU only 20 seconds, launches Spotify, waits 5 seconds, simulates media control "next" then sets the volume to 10.
Can't hurt to try..
i added a task to vibrate the phone after trying to launch pandora. The phone seems to vibrate every time but pandora will only start if the screen is on. Thought it may be lock screen related so i totally disabled it, same results. Ill mess around with the secure settings tip above, the fact that it vibrates every time makes me think its something else though. Attached some logs below. Each set contains all logs from profile active to profile inactive.
EDIT --> work around found. Removing log in case there are any personal details
DELETED
DELETED
Comparing the logs in notepad++, they seem to be almost identical (with the exceptions of some of the timing of logs, had to move them around to match them up). The only difference I can see is the following lines and what appears to be Pandora starting up and exiting when it works ( events surrounded by #NLI: tickerText. The first line says True when screen is on and the second line is missing when pandora failed to load.
31-10-2018 M: 11.17.12#M: user present: false
31-10-2018 M: 11.17.12#M: startUAAA: need alarm: false
oddly enough... installing Secure Settings and using it to launch the same Pandora activity seems to work (so far)