Related
Hi guys
I was trying some of custom rom on my OP6 and I wanted to go back to Oxygen OS. So i did a clean installation with system wipe and i flashed the last full OTA update. But since i can't boot to system anymore, TWRP always displays that there is no OS installed despite the fact that I've tried several rom . Is this the first time it's done this to me how can I fix it?
raptax said:
Hi guys
I was trying some of custom rom on my OP6 and I wanted to go back to Oxygen OS. So i did a clean installation with system wipe and i flashed the last full OTA update. But since i can't boot to system anymore, TWRP always displays that there is no OS installed despite the fact that I've tried several rom . Is this the first time it's done this to me how can I fix it?
Click to expand...
Click to collapse
The best suggestion I can give you is to flash stock oos with TWRP, reboot to stock recovery, without flashing anything else, wipe data from stock recovery and startup system.. if it is working you can flash back TWRP and magisk if you need it
Just be careful because at your point is easy to lose all of your stored data
Hitman478™ said:
The best suggestion I can give you is to flash stock oos with TWRP, reboot to stock recovery, without flashing anything else, wipe data from stock recovery and startup system.. if it is working you can flash back TWRP and magisk if you need it
Just be careful because at your point is easy to lose all of your stored data
Click to expand...
Click to collapse
I tried your solution ..... and it worked thx man
I don't know why there was a problem with TWRP but the important thing is that my phone is alive again
raptax said:
I tried your solution ..... and it worked thx man
I don't know why there was a problem with TWRP but the important thing is that my phone is alive again
Click to expand...
Click to collapse
Exactly! I'm glad to had help you sometimes if something is done wrong TWRP is dangerous
raptax said:
I tried your solution ..... and it worked thx man
I don't know why there was a problem with TWRP but the important thing is that my phone is alive again
Click to expand...
Click to collapse
If you wipe system, then flash oos ROM, TWRP will think there is no os. You can just ignore and boot.
Wiping system then flashing any time will make twrp display "no os installed" it does this because it hasn't created files for twrp to check if you have a ton installed. Flashing twrp then rebooting to twrp fixes it.
Reboot to stock recovery?
Hitman478™ said:
The best suggestion I can give you is to flash stock oos with TWRP, reboot to stock recovery, without flashing anything else, wipe data from stock recovery and startup system.. if it is working you can flash back TWRP and magisk if you need it
Just be careful because at your point is easy to lose all of your stored data
Click to expand...
Click to collapse
Hi, need a little bit of support, since I'm new to this as well. I was in a working OOS open beta 25/28, but then I think I flashed the wrong zip (OOS 9.0.9?), and I was not able to boot to system. It kept going to "bootloader unlocked" screen and custom recovery. Currently in TWRP blu_spark 3.3.1-x v. 9.109, and it's showing me no OS installed when I attempt to reboot. I haven't rebooted to system yet.
All the folders in my /sdcard is gibberish... if I try to push a file to it, it says "Required key not available." I did remove all security/passwords from my phone before doing any updates/backups.
I completed a wipe cache/dalvik/system via TWRP, and flashed the OOS OTA stable Android 10 zip downloaded directly from OnePlus Support. Considering this situation, do you still think it's safe for me to reboot to system? Then how do I get to stock recovery from there--is that by holding down the buttons?
5xonlineage said:
Hi, need a little bit of support, since I'm new to this as well. I was in a working OOS open beta 25/28, but then I think I flashed the wrong zip (OOS 9.0.9?), and I was not able to boot to system. It kept going to "bootloader unlocked" screen and custom recovery. Currently in TWRP blu_spark 3.3.1-x v. 9.109, and it's showing me no OS installed when I attempt to reboot. I haven't rebooted to system yet.
All the folders in my /sdcard is gibberish... if I try to push a file to it, it says "Required key not available." I did remove all security/passwords from my phone before doing any updates/backups.
I completed a wipe cache/dalvik/system via TWRP, and flashed the OOS OTA stable Android 10 zip downloaded directly from OnePlus Support. Considering this situation, do you still think it's safe for me to reboot to system? Then how do I get to stock recovery from there--is that by holding down the buttons?
Click to expand...
Click to collapse
No, your internal storage Is like trash cause the last rom you flashed has older security patch than oos10. Your device Is now encrypted and wont boot to system. I Guess you have to erase all via MSN tool or fastboot signed rom. Even if you wiped what mentioned above, your problem still be the data.
Fastboot method?
°Washy said:
No, your internal storage Is like trash cause the last rom you flashed has older security patch than oos10. Your device Is now encrypted and wont boot to system. I Guess you have to erase all via MSN tool or fastboot signed rom. Even if you wiped what mentioned above, your problem still be the data.
Click to expand...
Click to collapse
Thank you for replying. I'm relieved that you know of a couple methods to try.
Is using "Format Data" in TWRP an option for dealing with the encryption??
For the MSN tool, can I use this one? Tried looking around, but it's unclear. "[TOOL] MsmDownloadTool V4.0 International (Oxygen OS 5.1.5)" https://forum.xda-developers.com/on...wnloadtool-v4-0-international-t3798892/page10
I would be more comfortable with using fastboot, but am I at any risk of having lost fastboot, or can I just turn off my device from TWRP right now and hold down the buttons to get there? Afraid to move out of TWRP right now, in case I can't get back. I do have twrp-3.3.1-18-enchilada-Q-mauronofrio.img that I can run from fastboot if needed.
By "signed rom," do you mean I can simply flash one of the zips here from fastboot? "[OnePlus 6][ROM][OTA][Oxygen OS] Mirrors for official Oxygen OS ROMs and OTA updates" https://forum.xda-developers.com/oneplus-6/how-to/oneplus-6-mirrors-official-oxygen-os-t3792244
Thanks again.
5xonlineage said:
Thank you for replying. I'm relieved that you know of a couple methods to try.
Is using "Format Data" in TWRP an option for dealing with the encryption??
For the MSN tool, can I use this one? Tried looking around, but it's unclear. "[TOOL] MsmDownloadTool V4.0 International (Oxygen OS 5.1.5)" https://forum.xda-developers.com/on...wnloadtool-v4-0-international-t3798892/page10
I would be more comfortable with using fastboot, but am I at any risk of having lost fastboot, or can I just turn off my device from TWRP right now and hold down the buttons to get there? Afraid to move out of TWRP right now, in case I can't get back. I do have twrp-3.3.1-18-enchilada-Q-mauronofrio.img that I can run from fastboot if needed.
By "signed rom," do you mean I can simply flash one of the zips here from fastboot? "[OnePlus 6][ROM][OTA][Oxygen OS] Mirrors for official Oxygen OS ROMs and OTA updates" https://forum.xda-developers.com/oneplus-6/how-to/oneplus-6-mirrors-official-oxygen-os-t3792244
Thanks again.
Click to expand...
Click to collapse
I hardbricked my device about 10 times and i was able to recovery It even from a blank screen. Btw format data Will erase all your data but also the internal storage. About fastboot dont be afraid, go under twrp reboot section and reboot to bootloader. Then go under xda op6 guide section and search for mirrors for fastboot rom guide by Mauronofrio. He pushed my ass out the **** a lot of time.
P.s. Sorry but I dunno how to paste a link via xda app. Yes, ik! It's a vert newbie thing.
5xonlineage said:
Thank you for replying. I'm relieved that you know of a couple methods to try.
Is using "Format Data" in TWRP an option for dealing with the encryption??
For the MSN tool, can I use this one? Tried looking around, but it's unclear. "[TOOL] MsmDownloadTool V4.0 International (Oxygen OS 5.1.5)" https://forum.xda-developers.com/on...wnloadtool-v4-0-international-t3798892/page10
I would be more comfortable with using fastboot, but am I at any risk of having lost fastboot, or can I just turn off my device from TWRP right now and hold down the buttons to get there? Afraid to move out of TWRP right now, in case I can't get back. I do have twrp-3.3.1-18-enchilada-Q-mauronofrio.img that I can run from fastboot if needed.
By "signed rom," do you mean I can simply flash one of the zips here from fastboot? "[OnePlus 6][ROM][OTA][Oxygen OS] Mirrors for official Oxygen OS ROMs and OTA updates" https://forum.xda-developers.com/oneplus-6/how-to/oneplus-6-mirrors-official-oxygen-os-t3792244
Thanks again.
Click to expand...
Click to collapse
Do you solve, man?
Fastboot ROM
°Washy said:
I hardbricked my device about 10 times and i was able to recovery It even from a blank screen. Btw format data Will erase all your data but also the internal storage. About fastboot dont be afraid, go under twrp reboot section and reboot to bootloader. Then go under xda op6 guide section and search for mirrors for fastboot rom guide by Mauronofrio. He pushed my ass out the **** a lot of time.
P.s. Sorry but I dunno how to paste a link via xda app. Yes, ik! It's a vert newbie thing.
Click to expand...
Click to collapse
That's awesome, I'm starting to grasp how much of a genius Mauronofrio is, after so many people referencing his work.
In his guide, he says, "These ROMs can't be used to update or downgrade your phone but just to restore your phone, so don't use them to come back to oreo or to update from oreo to pie." This may be a dumb question, but how do I know which zip/OOS version to flash, when I don't have a functioning OS on my phone?
5xonlineage said:
That's awesome, I'm starting to grasp how much of a genius Mauronofrio is, after so many people referencing his work.
In his guide, he says, "These ROMs can't be used to update or downgrade your phone but just to restore your phone, so don't use them to come back to oreo or to update from oreo to pie." This may be a dumb question, but how do I know which zip/OOS version to flash, when I don't have a functioning OS on my phone?
Click to expand...
Click to collapse
I talked with Mauronofrio in pm and he said me that you could solve your issue simply flash the ROM you want and format data after flash that one. Remember that your internal will be wiped but it would happen in any scenario we talked.
Magisk, boot img?
°Washy said:
I talked with Mauronofrio in pm and he said me that you could solve your issue simply flash the ROM you want and format data after flash that one. Remember that your internal will be wiped but it would happen in any scenario we talked.
Click to expand...
Click to collapse
That worked! And starstruck that you were able to check that with him. I flashed Mauronofrio's fastboot ROM for 10.3.2 and it rebooted (WOW). I clicked through the Google setup pages and checked that my data and wifi worked.
I then went back into fastboot, booted M's twrp img, fomatted data, and then installed twrp-3.3.1-x_blu_spark_v9.109_op6.zip, rebooted into recovery.
Then I think I made a mistake, because I installed Magisk-v20.4.zip. It succeeded, but now I can't boot into system anymore. Is it too late to flash the 10.3.2 boot.img?
5xonlineage said:
That worked! And starstruck that you were able to check that with him. I flashed Mauronofrio's fastboot ROM for 10.3.2 and it rebooted (WOW). I clicked through the Google setup pages and checked that my data and wifi worked.
I then went back into fastboot, booted M's twrp img, fomatted data, and then installed twrp-3.3.1-x_blu_spark_v9.109_op6.zip, rebooted into recovery.
Then I think I made a mistake, because I installed Magisk-v20.4.zip. It succeeded, but now I can't boot into system anymore. Is it too late to flash the 10.3.2 boot.img?
Click to expand...
Click to collapse
No. Just flash stock boot image if magisk broke something.
Rooted
°Washy said:
No. Just flash stock boot image if magisk broke something.
Click to expand...
Click to collapse
I ended up following the guide to Magisk Root without TWRP for OnePlus 6 Oxygen OS https://forum.xda-developers.com/oneplus-6/how-to/patched-boot-image-magisk-16-7-beta-t3818853 since it was referenced by Mauronofrio's post for having issues getting his TWRP to work with latest Magisk.
Someone posted a patched boot.img for 10.3.2, so now I'm rooted without TWRP. Priorities. Now all I need is for special characters and emojis to work Will keep an eye on other threads.
I'm learning a lot, thanks so much for all your help. You pointed me in the right direction when I was not sure what the hell to do!
5xonlineage said:
I ended up following the guide to Magisk Root without TWRP for OnePlus 6 Oxygen OS https://forum.xda-developers.com/oneplus-6/how-to/patched-boot-image-magisk-16-7-beta-t3818853 since it was referenced by Mauronofrio's post for having issues getting his TWRP to work with latest Magisk.
Someone posted a patched boot.img for 10.3.2, so now I'm rooted without TWRP. Priorities. Now all I need is for special characters and emojis to work Will keep an eye on other threads.
I'm learning a lot, thanks so much for all your help. You pointed me in the right direction when I was not sure what the hell to do!
Click to expand...
Click to collapse
I followed that thread for the first A10 release cause there wasn't a worked twrp yet. You are welcome man, when I feel myself usefull I always try to help.
Hello Guys,
https://mega.nz/#F!lNMQgQDa!_0YJaETUhVIShQXLW0_MdA
This link contains the global version backup, at January 27. This is not the latest update.
Use it for good only, i'm not responsible for any damage you get, etc etc.
DO NOT FLASH ANYTHING IF YOU DON'T HAVE BACKUPS
I'm assuming I'll also need the custom_a image when flashing?
JengaMasterG said:
I'm assuming I'll also need the custom_a image when flashing?
Click to expand...
Click to collapse
Probably. Just make sure to backup everything (the slots you will be using)
Cool, will do
我中国版刷了无限重启
Auto Translate :- Not Accurate
I have a Chinese version of the black shark
Click to expand...
Click to collapse
I flashed this firmware and appears new update in JoyUi. I choose to update now but JoyUi keeps the old version and notifies again about the new update.
Is this bug because I have Magisk installed? Can I uninstall Magisk to update and flash it again?
Hi Everyone,
Just a reminder to our forum rules :- https://forum.xda-developers.com/announcement.php?a=81
4. Use the English language.
We understand that with all the different nationalities, not everyone speaks English well, but please try. If you're really unable to post in English, use an online translator. You're free to include your original message in your own language, below the English translation. (This rule covers your posts, profile entries and signature). You could try :- https://translate.google.com/ or https://www.babelfish.com/ or use one of your choice.
Click to expand...
Click to collapse
Thanks
SacredDeviL666.
FasterBit said:
I flashed this firmware and appears new update in JoyUi. I choose to update now but JoyUi keeps the old version and notifies again about the new update.
Is this bug because I have Magisk installed? Can I uninstall Magisk to update and flash it again?
Click to expand...
Click to collapse
I don't think you'll be able to update your JOY UI using the built in OTA, as your phone isn't fully global.
Using this method gives you the basic files needed to get the global version working, however in the OTA there are other partitions that are also updated.
Also, when updating, the phone expects the current ROM to be installed on the other slot too, to update the other slot and reboot into it. You probably have the ROM installed on one slot only, and the Chinese on the other slot.
So basically, no way to update unless a newer global version is available and backed up.
Hello, I've been trying to flash my CN shark to the global version using your files but without any success.
It always bootloops before the bootanimation, then fallbacks into the other slot.
I've wiped data and dalvik, flashed on both partitions dmverity/encryption disabler + magisk, but it still bootloops on the initial logo (before the boot animation).
I tried flashing the 4 imgs from fastboot, from twrp, manually with dd but to no success.
To me, it looks like it fails to boot due to something related to encryption (the behaviour is the same to when you flash magisk and don't wipe from the original recovery).
Any help please?
JengaMasterG said:
Cool, will do
Click to expand...
Click to collapse
I've seen in the pther thread you managed to flash the global rom over the chinese device, how did you do?
loriz said:
Hello, I've been trying to flash my CN shark to the global version using your files but without any success.
It always bootloops before the bootanimation, then fallbacks into the other slot.
I've wiped data and dalvik, flashed on both partitions dmverity/encryption disabler + magisk, but it still bootloops on the initial logo (before the boot animation).
I tried flashing the 4 imgs from fastboot, from twrp, manually with dd but to no success.
To me, it looks like it fails to boot due to something related to encryption (the behaviour is the same to when you flash magisk and don't wipe from the original recovery).
Any help please?
I've seen in the pther thread you managed to flash the global rom over the chinese device, how did you do?
Click to expand...
Click to collapse
Hmmm
I think you had to format your internal storage after flashing encryption disabler. Did you do it?
Yes I did it, but i managed to make it work.
I needed to do an Advanced Wipe -> Data -> Change Filesystem -> EXT4, remount Data, Advanced Wipe -> Data -> Wipe, Advanced Wipe -> Data -> Repair
With these steps it finally booted!
Perfect
I want to change the Chinese version of the Black Shark to the global version, but I'm a beginner. Can you explain it to me?
Can you tell me in detail how to change to global rom?
It would be better if you have videos or images.
please...:crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:
hyun7645 said:
I want to change the Chinese version of the Black Shark to the global version, but I'm a beginner. Can you explain it to me?
Click to expand...
Click to collapse
GlobalShark said:
Can you tell me in detail how to change to global rom?
It would be better if you have videos or images.
please...:crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
I've written instructions here on changing from global to CN rom. This will work from changing from CN to global also.
@gilbert32 I don't remember which thread you asked for the custom.img file at, but I've uploaded it here
JengaMasterG said:
I've written instructions here on changing from global to CN rom. This will work from changing from CN to global also.
@gilbert32 I don't remember which thread you asked for the custom.img file at, but I've uploaded it here
Click to expand...
Click to collapse
I am using A0 model.
128g / 8g A0 model.
I want to change to Global Rom.
https://mega.nz/#F!lNMQgQDa!_0YJaETUhVIShQXLW0_MdA
Downloaded from here
boot_a.img
vendor_a.img
system_a.img
Do I have to change three files?
I used twrp to change the img file,
and I installed DisableForceEncryption_Treble.zip
Finally I did Wipe. (davlik / art cache and data)
But it does not boot.
It stops at S.
I would like a solution.
And how do I install custom_a.img?
GlobalShark said:
I am using A0 model.
128g / 8g A0 model.
I want to change to Global Rom.
https://mega.nz/#F!lNMQgQDa!_0YJaETUhVIShQXLW0_MdA
Downloaded from here
boot_a.img
vendor_a.img
system_a.img
Do I have to change three files?
I used twrp to change the img file,
and I installed DisableForceEncryption_Treble.zip
Finally I did Wipe. (davlik / art cache and data)
But it does not boot.
It stops at S.
I would like a solution.
And how do I install custom_a.img?
Click to expand...
Click to collapse
What active boot did you do it on? It worked for active boot a for me. Try downloading and flashing the system again. The software that we have are the 6gb/64gb models but I doubt that would be an issue...
You would fastboot flash custom_a to your phone
Is there a way to update the global stock rom once installed?
jfrankie21 said:
hello I'm from Peru you could help me I have a black shark cn I followed the tutorial but it stays in the logo "s" install by twrp the images less the custom_a because I do not know what it works you could help me please because I can not use my cell phone I'm going 3 days without using it thanks.
Click to expand...
Click to collapse
Restore your backup
how to install
gilbert32 said:
Hello Guys,
https://mega.nz/#F!lNMQgQDa!_0YJaETUhVIShQXLW0_MdA
This link contains the global version backup, at January 27. This is not the latest update.
Use it for good only, i'm not responsible for any damage you get, etc etc.
Click to expand...
Click to collapse
dera Brother....
I have brack my globle version Black Shark (SKR-HO), can i recover it With this file. Becous i didn't find any vorsion for this phone,
i was on latest build , try to root after that get stock on boot screen.
Hey guys,
Im quite new to android and all that comes with it regarding flashing roms. Now i've had the mi mix 3 cn version since october and been wanting to flash to the global rom ever since. So far i have unlocked the bootloader only on my Mix 3. Now Ive started doing some experimenting with an old one plus 1 device of mine before i fully try it on my mix 3 (and **** it up) and so far been able to unlock bootloader and install twrp. But it seems i cant get through the rooting part because every time i download supersu.zip (on my mac) it doesnt actually show as a zip file. So when i copy/paste it into the oneplus directory and try to install through twrp, basically nothing happens because its not a zip file. Is the solution as simple as: " i should just download the same file using Windows??"
Magisk:
in order to root my my Mix 3 and Oneplus 1 i need to install and run Magisk. But after installing it and opening it, it always says 'Magisk is not installed" and under that "Magisk Manager installed".
Question 1: How to fix this.....
Question 2: Do i need to root my Mix 3 in order to flash the global rom?
Currently running MIUI 10.2 Stable 10.2.2.0(PEECNXM)
Many thanks!
Safari unzips after downloading. You can disable it in the settings I think.
TheArchangel123 said:
Hey guys,
Im quite new to android and all that comes with it regarding flashing roms. Now i've had the mi mix 3 cn version since october and been wanting to flash to the global rom ever since. So far i have unlocked the bootloader only on my Mix 3. Now Ive started doing some experimenting with an old one plus 1 device of mine before i fully try it on my mix 3 (and **** it up) and so far been able to unlock bootloader and install twrp. But it seems i cant get through the rooting part because every time i download supersu.zip (on my mac) it doesnt actually show as a zip file. So when i copy/paste it into the oneplus directory and try to install through twrp, basically nothing happens because its not a zip file. Is the solution as simple as: " i should just download the same file using Windows??"
Magisk:
in order to root my my Mix 3 and Oneplus 1 i need to install and run Magisk. But after installing it and opening it, it always says 'Magisk is not installed" and under that "Magisk Manager installed".
Question 1: How to fix this.....
Question 2: Do i need to root my Mix 3 in order to flash the global rom?
Currently running MIUI 10.2 Stable 10.2.2.0(PEECNXM)
Many thanks!
Click to expand...
Click to collapse
Flash magisk 19 then install the magisk app
TheArchangel123 said:
Hey guys,
Im quite new to android and all that comes with it regarding flashing roms. Now i've had the mi mix 3 cn version since october and been wanting to flash to the global rom ever since. So far i have unlocked the bootloader only on my Mix 3. Now Ive started doing some experimenting with an old one plus 1 device of mine before i fully try it on my mix 3 (and **** it up) and so far been able to unlock bootloader and install twrp. But it seems i cant get through the rooting part because every time i download supersu.zip (on my mac) it doesnt actually show as a zip file. So when i copy/paste it into the oneplus directory and try to install through twrp, basically nothing happens because its not a zip file. Is the solution as simple as: " i should just download the same file using Windows??"
Magisk:
in order to root my my Mix 3 and Oneplus 1 i need to install and run Magisk. But after installing it and opening it, it always says 'Magisk is not installed" and under that "Magisk Manager installed".
Question 1: How to fix this.....
Question 2: Do i need to root my Mix 3 in order to flash the global rom?
Currently running MIUI 10.2 Stable 10.2.2.0(PEECNXM)
Many thanks!
Click to expand...
Click to collapse
You do not need to root your device to flash it to the Global ROM. Unless you need root for something specific, I would suggest forgetting about TWRP and root and using fastboot to flash to the Global ROM. You can find the fastboot flashing guide, here. Click on fastboot, read the instructions, download the correct fastboot image for the Mi Mix 3, unzip it, boot your device into fastboot, connect it via USB to a Windows based machine, and run the flash_all.bat. The device will reboot when finished.
Thanks!
jcsww said:
You do not need to root your device to flash it to the Global ROM. Unless you need root for something specific, I would suggest forgetting about TWRP and root and using fastboot to flash to the Global ROM. You can find the fastboot flashing guide, "https://en.miui.com/a-232.html"]here. Click on fastboot, read the instructions, download the correct fastboot image for the Mi Mix 3, unzip it, boot your device into fastboot, connect it via USB to a Windows based machine, and run the flash_all.bat. The device will reboot when finished.
Click to expand...
Click to collapse
Ok thanks! Will definitly check it out. However i would like to get twrp working as well even just for the sake of it. But every time after i do the "reboot flash recovery rocovery.img" cmd it keeps booting into either the normal OS or into fastboot mode. Ive read about installing the force disable encryption zip file but how do i install that if i cant boot into twrp?
TheArchangel123 said:
Ok thanks! Will definitly check it out. However i would like to get twrp working as well even just for the sake of it. But every time after i do the "reboot flash recovery rocovery.img" cmd it keeps booting into either the normal OS or into fastboot mode. Ive read about installing the force disable encryption zip file but how do i install that if i cant boot into twrp?
Click to expand...
Click to collapse
Which TWRP are you flashing? When I was attempting to root my Chinese Mi Mix 3 running the GLobal Stable ROM, it was very hit and miss getting TWRP to stick. I couldn't get fastboot reboot-recovery to work for me so I had to power the device off after flashing TWRP and then hold Volume Up and Power until it vibrates again to get it into TWRP.
To root in that particular situation (Chinese device/Global ROM), you need to flash this region hiding thing right after you flash root. My device kept bootlooping so I gave up and used fastboot to debloat the ROM, which took a few minutes compared to the almost hour I spent on trying to get TWRP to stick and try to get the device rooted. This is one of my many gripes with Magisk root and how inferior it is to Chainfire's discontinued implementation.
Final stage!
Ok so my last post can be ignored as i was finally able to boot into twrp and also installed magisk so now my device is rooted.
I have now uploaded MIMIX3GLOBAL_V10.2.2.0 PEEMIXM into my phones directory.
Now before i install it thru twrp.... Do i need to wipe/erase/clean my phone first? Or can i just install it without doing so?
Many thanks in advance!
TheArchangel123 said:
Ok so my last post can be ignored as i was finally able to boot into twrp and also installed magisk so now my device is rooted.
I have now uploaded MIMIX3GLOBAL_V10.2.2.0 PEEMIXM into my phones directory.
Now before i install it thru twrp.... Do i need to wipe/erase/clean my phone first? Or can i just install it without doing so?
Many thanks in advance!
Click to expand...
Click to collapse
You can dirty flash it. It's just a minor update. The current beta will bring some new features though, once it is released in the next stable version.
jcsww said:
You can dirty flash it. It's just a minor update. The current beta will bring some new features though, once it is released in the next stable version.
Click to expand...
Click to collapse
Even though my current rom is the chinese version and i want to flash to a global version?
And how about if I flash to Mi Mix 3’s MIUI 10 Global Stable ROM based on Android 9 Pie (MIUI v10.0.11)??
TheArchangel123 said:
Even though my current rom is the chinese version and i want to flash to a global version?
And how about if I flash to Mi Mix 3’s MIUI 10 Global Stable ROM based on Android 9 Pie (MIUI v10.0.11)??
Click to expand...
Click to collapse
You can't dirty flash it...
Wipe in twrp
Install zip in twrp
format data in twrp
Reboot
If you want to root it you'll need the hardware origin magisk module that's somewhere in the mix 3 forums
Region, china?!
So i just clean flashed my phone and then formatted the data and rebooted. After i chose my language i have to choose my region, and the only option it gives me is China!????
TheArchangel123 said:
So i just clean flashed my phone and then formatted the data and rebooted. After i chose my language i have to choose my region, and the only option it gives me is China!????
Click to expand...
Click to collapse
China has the most content, it's not a bad thing. All themes become available etc
Mackay53 said:
China has the most content, it's not a bad thing. All themes become available etc
Click to expand...
Click to collapse
ok fair enough. However I have a situation now... after installing the process goes into a loop after selection china as region. The last small message it gives is "find device quit unexpectedly" and then it loops for 5 minutes untill it boots into recovery mode. Here i can only choose boot system (which will go into the same loop again), wipe data, or connect to MIUI assistent...
What did i do wrong?? Did i flash the wrong rom?
TheArchangel123 said:
So i just clean flashed my phone and then formatted the data and rebooted. After i chose my language i have to choose my region, and the only option it gives me is China!????
Click to expand...
Click to collapse
When cross-flashing, clean/factory reset is always the way to go. With TWRP though, there seems to be some sort of region options not changing issue. There are a few ways to work around it I personally never bothered with, but I have flashed two Chinese devices via fastboot with the Global Stable ROM and haven't ran into the region issue at all.
TheArchangel123 said:
ok fair enough. However I have a situation now... after installing the process goes into a loop after selection china as region. The last small message it gives is "find device quit unexpectedly" and then it loops for 5 minutes untill it boots into recovery mode. Here i can only choose boot system (which will go into the same loop again), wipe data, or connect to MIUI assistent...
What did i do wrong?? Did i flash the wrong rom?
Click to expand...
Click to collapse
Google miui region fix, download and flash and it should sort it
Mackay53 said:
Google miui region fix, download and flash and it should sort it
Click to expand...
Click to collapse
ok got the miui region fix. But how do i flash it... my phone wont boot into twrp anymore. Im also not sure how to get into fastboot either because it doesnt seem to connect if i type in the commands in cmd
TheArchangel123 said:
ok got the miui region fix. But how do i flash it... my phone wont boot into twrp anymore. Im also not sure how to get into fastboot either because it doesnt seem to connect if i type in the commands in cmd
Click to expand...
Click to collapse
Fastboot is the bootloader. Once you boot your device into the bootloader (Volume Down + Power), you can use ADB through the command prompt to flash TWRP or just flash the Global ROM properly. This thread on it is still very relevant and useful.
Got it!
jcsww said:
Fastboot is the bootloader. Once you boot your device into the bootloader (Volume Down + Power), you can use ADB through the command prompt to flash TWRP or just flash the Global ROM properly. This thread on it is still very relevant and useful.
Click to expand...
Click to collapse
Thanks guys, after a few long days ive finally succeeded to flash a global rom for the first time. Nxt step, try to get all my apps/data etc back. Hopefully i made a correct back up...
So I am not an entire noob when it comes to these things, I've flashed ROMs on phones for 8 years now, but this Moto G7 Power screwed me up good.
I tried installing CrDroid from this post. I didn't even notice the A/B part at first, I went through all the usual steps, I booted TWRP, then flashed it, rebooted into the installed TWRP, flashed CrDroid, GApps and Magisk and rebooted, hoping to start Android up. At that part it all screwed up. The phone didn't boot AT ALL, and after a while I found that blankflash zip file and managed to get into the bootloader again. The only thing I can do now is boot into TWRP, not flash, and when I boot, the touchscreen does not work.
So, where do I go from here? I now only have an unlocked bootloader to play with. What are the exact steps to flash the firmware? Why do I need to flash firmware to slot A anyway? Isn't or wasn't there firmware out of the box on the device? The guides for this phone are vague and people write really short and rambling sentences in the steps and mention certain files out of the blue without explanation or download link.
1 - Which firmware file do I need? I have an XT1955-4 bought in a Dutch shop called Belsimpel with no sim. I assume it's an international variant. Here is a download list of all the firmware variants, but how do I know which one to pick? Will it wipe things like IMEI data? The box says the type is M3C94, and it seems to be this international variant.
2 - In the bootloader, what commands do I need to put into adb when I want to flash the firmware to partition A?
3 - When I boot into TWRP, my touchscreen does not work, so how can I even use it?
4 - The 'guide' in the CrDroid thread suddenly mentions copypartitions.zip. What is that file, and why do I need to flash it? It says I have to flash it in Slot A. Does TWRP give options to switch slots? I wish I could check but since my touch screen doesn't work in TWRP..
5 - During the actual ROM install part, the guide says Flash ROM.zip + TWRP_installer/boot.img ramdisk method Why do I need to install TWRP again? And what is the ramdisk method? How do you do that?
Can someone please explain in detail step by step what I need to do?
kerelberel said:
So I am not an entire noob when it comes to these things, I've flashed ROMs on phones for 8 years now, but this Moto G7 Power screwed me up good.
I tried installing CrDroid from this post. I didn't even notice the A/B part at first, I went through all the usual steps, I booted TWRP, then flashed it, rebooted into the installed TWRP, flashed CrDroid, GApps and Magisk and rebooted, hoping to start Android up. At that part it all screwed up. The phone didn't boot AT ALL, and after a while I found that blankflash zip file and managed to get into the bootloader again. The only thing I can do now is boot into TWRP, not flash, and when I boot, the touchscreen does not work.
So, where do I go from here? I now only have an unlocked bootloader to play with. What are the exact steps to flash the firmware? Why do I need to flash firmware to slot A anyway? Isn't or wasn't there firmware out of the box on the device? The guides for this phone are vague and people write really short and rambling sentences in the steps and mention certain files out of the blue without explanation or download link.
1 - Which firmware file do I need? I have an XT1955-4 bought in a Dutch shop called Belsimpel with no sim. I assume it's an international variant. Here is a download list of all the firmware variants, but how do I know which one to pick? Will it wipe things like IMEI data? The box says the type is M3C94, and it seems to be this international variant.
2 - In the bootloader, what commands do I need to put into adb when I want to flash the firmware to partition A?
3 - When I boot into TWRP, my touchscreen does not work, so how can I even use it?
4 - The 'guide' in the CrDroid thread suddenly mentions copypartitions.zip. What is that file, where do I download it, and why do I need to flash it? It says I have to flash it in Slot A. Does TWRP give options to switch slots?
5 - During the actual ROM install part, the guide says Flash ROM.zip + TWRP_installer/boot.img ramdisk method Why do I need to install TWRP again? And what is the ramdisk method? How do you do that?
Can someone please explain in detail step by step what I need to do?
Click to expand...
Click to collapse
1. go to settings - system - about phone check build number, this is the firmware you'll need
2. there's a thread here regarding that matter check again
3. I'm not aware of this issue
4. you'll only need to flash that file once coming from stock rom - https://androidfilehost.com/?fid=4349826312261636295
5. because it be overwritten by lineage recovery.
ramdisk method is just another way of installing twrp back when we still dont have the installer zip
vinoxflame said:
1. go to settings - system - about phone check build number, this is the firmware you'll need
2. there's a thread here regarding that matter check again
3. I'm not aware of this issue
4. you'll only need to flash that file once coming from stock rom - https://androidfilehost.com/?fid=4349826312261636295
5. because it be overwritten by lineage recovery.
ramdisk method is just another way of installing twrp back when we still dont have the installer zip
Click to expand...
Click to collapse
I only have the boot loader, no stock ROM. I wiped that when I tried installing CrDroid, as I have written in my post. So I can't check my firmware if I don't have ROM installed. And I know which thread you mean because I linked the list of firmware from that thread in my post.
The big issue here is the touch screen not working. I can't do anything inside TWRP.
kerelberel said:
I only have the boot loader, no stock ROM. I wiped that when I tried installing CrDroid, as I have written in my post. So I can't check my firmware if I don't have ROM installed. And I know which thread you mean because I linked the list of firmware from that thread in my post.
The big issue here is the touch screen not working. I can't do anything inside TWRP.
Click to expand...
Click to collapse
then try another version of twrp or the unofficial orangefox recovery for our device
vinoxflame said:
then try another version of twrp or the unofficial orangefox recovery for our device
Click to expand...
Click to collapse
I tried an older version of TWRP which didn't work either. I am not aware of Orangefox, but I don't see any mention, official or unofficial for the G7 Power. There's no mention in the G7 Power forum either.
kerelberel said:
I tried an older version of TWRP which didn't work either. I am not aware of Orangefox, but I don't see any mention, official or unofficial for the G7 Power. There's no mention in the G7 Power forum either.
Click to expand...
Click to collapse
it's on the telegram group
vinoxflame said:
it's on the telegram group
Click to expand...
Click to collapse
No it is not. There's no mention of G7 Power in the search results. Only E5.
kerelberel said:
No it is not. There's no mention of G7 Power in the search results. Only E5.
Click to expand...
Click to collapse
deleted
vinoxflame said:
https://t.me/mG7Power
tell me if it is not!!!!
Click to expand...
Click to collapse
From the desktop search in this one I couldn't find it: https://t.me/OrangeFoxRecovery I didn't know there was a separate chat for each device. But thanks.
FWIW when this happened to me I did the blankflash thing to get it back to bootloader. Then I used the LMSA tool from Motorola to do a rescue/restore.
I also used LMSA to force the update to the most recent security update. In general, it seems a very useful utility.
https://www.motorola.com/us/lenovo-motorola-smart-assistant
I had this issue after blankflashing this temperamental device out of a brick. While in twrp you can do "adb shell" then "twrp install /path/to/zip" I think this has to do with new twrp versions on older firmwares
kerelberel said:
I only have the boot loader, no stock ROM. I wiped that when I tried installing CrDroid, as I have written in my post. So I can't check my firmware if I don't have ROM installed. And I know which thread you mean because I linked the list of firmware from that thread in my post.
The big issue here is the touch screen not working. I can't do anything inside TWRP.
Click to expand...
Click to collapse
When i had this issue go reboot fastboot
then fastboot boot recovery.img or twrp as your boot img do what you need to do just dont flash it to boot only boot from it so you preserve your real boot should fix the touch screen part only time i had prob like this is when i flashed twrp to recovery without disabling dm verity etc. But I cant even get a stock OTA since I flashed twrp as recovery nor can I find a RETUS stock recovery.img so far if i had that I can update and keep magisk etc, then reflash twrp when im done.
---------- Post added at 06:06 PM ---------- Previous post was at 05:58 PM ----------
kerelberel said:
I only have the boot loader, no stock ROM. I wiped that when I tried installing CrDroid, as I have written in my post. So I can't check my firmware if I don't have ROM installed. And I know which thread you mean because I linked the list of firmware from that thread in my post.
The big issue here is the touch screen not working. I can't do anything inside TWRP.
Click to expand...
Click to collapse
When i had this issue go reboot fastboot
then fastboot boot recovery.img or twrp as your boot img do what you need to do just dont flash it to boot only boot from it so you preserve your real boot should fix the touch screen part only time i had prob like this is when i flashed twrp to recovery without disabling dm verity etc. But I cant even get a stock OTA since I flashed twrp as recovery nor can I find a RETUS stock recovery.img so far if i had that I can update and keep magisk etc, then reflash twrp when im done. The latest stock RETUS build i can find is here https://mirrors.lolinet.com/firmwar...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip but if i do that i will lose all my apps AGAIN etc I am trying to just get the stock recovery img from previous version so I can install the ota in magisk you just tap uninstall tap restore images to get stock boot as well then ota should work once its done go back into magisk and install to inactive slot but you will or could need TWRP A/B retention script so that you keep it even after ota...which you will first go in magisk tap uninstall restore images, but must have stock recovery not twrp installed at this time either from what i can tell, once ota is successful install the TWRP A/B Retention script but do this before you install magisk to inactive slot from magisk manager after that it should work. But I cannot locate a stock recovery.img thus far.... and I dont wanna redownload my apps right now, so I may just wait til I see a rom i really think ill like and say screw it.
kerelberel said:
I only have the boot loader, no stock ROM. I wiped that when I tried installing CrDroid, as I have written in my post. So I can't check my firmware if I don't have ROM installed. And I know which thread you mean because I linked the list of firmware from that thread in my post.
The big issue here is the touch screen not working. I can't do anything inside TWRP.
Click to expand...
Click to collapse
I also installed crDroid and after that twrp-3.3.1-2-ocean.img was not responding to touch, but twrp-3.3.1-0-ocean.img works. (btw I was doing a fastboot -w in between.)
Edit:
Ah nevermind, I have it constantly when installed, with both versions.
s33b said:
I also installed crDroid and after that twrp-3.3.1-2-ocean.img was not responding to touch, but twrp-3.3.1-0-ocean.img works. (btw I was doing a fastboot -w in between.)
Edit:
Ah nevermind, I have it constantly when installed, with both versions.
Click to expand...
Click to collapse
I've flashed another stock rom (https://forum.xda-developers.com/g7-power/how-to/guide-moto-g7-power-supra-flash-to-t3927138) and it worked with twrp-3.3.1-0-ocean.img not with the newest.
kerelberel said:
2 - In the bootloader, what commands do I need to put into adb when I want to flash the firmware to partition A?
Click to expand...
Click to collapse
You use fastboot commands in the bootloader.
The firmware contains a flash file with all fastboot commands you'll need.
kerelberel said:
3 - When I boot into TWRP, my touchscreen does not work, so how can I even use it?
Click to expand...
Click to collapse
TWRP has adb enabled by default. So instead of TWRP you can use
Code:
abd shell twrp --help
So you can use the basic functions like backup, install, and so on.
I had the same issue...
I'm not sure everyone is experiencing the same issue here, but I've been dealing with that exact problem the entire time I've had this phone. While this work around won't work every time, it will eventually work (for me within 3 tries). It doesn't matter if your "fastboot boot twrp.img" or running an installed version, all are the same. Even the latest 3.4.0.0.
As soon as you start recovery, start tapping the area of the screen where the "Advanced button" is in recovery. I mean tap as fast as you can, use two fingers if you need to. If it doesn't work right away, "adb reboot bootloader" and try again. I can get this to work within 3 tries. Its sucks and its stupid, but it works.
TheGuysGuysGuy said:
I'm not sure everyone is experiencing the same issue here, but I've been dealing with that exact problem the entire time I've had this phone. While this work around won't work every time, it will eventually work (for me within 3 tries). It doesn't matter if your "fastboot boot twrp.img" or running an installed version, all are the same. Even the latest 3.4.0.0.
As soon as you start recovery, start tapping the area of the screen where the "Advanced button" is in recovery. I mean tap as fast as you can, use two fingers if you need to. If it doesn't work right away, "adb reboot bootloader" and try again. I can get this to work within 3 tries. Its sucks and its stupid, but it works.
Click to expand...
Click to collapse
I getba link to one that works for u. https://t.me/CustoKernal_JavaShin_Mods/565. Fastboot boot (name of recovery)
roadkill42 said:
I getba link to one that works for u. https://t.me/CustoKernal_JavaShin_Mods/565. Fastboot boot (name of recovery)
Click to expand...
Click to collapse
Again not everyone is experiencing this same issue. A custom kernel isn't going to help when its incompatible with my ROM. My stupid workaround works for "No Touch Screen Response" in TWRP as well as OrangeFox. Its happened to me in both. Happily cruising along on Paranoid Android Quartz.
TheGuysGuysGuy said:
Again not everyone is experiencing this same issue. A custom kernel isn't going to help when its incompatible with my ROM. My stupid workaround works for "No Touch Screen Response" in TWRP as well as OrangeFox. Its happened to me in both. Happily cruising along on Paranoid Android Quartz.
Click to expand...
Click to collapse
The problem with the touch is the right driver needs to b installed that kernel I shared makes it work and stick I'm on it now go to tellagram group Moto g7 power support group both twrp and ofox there that works not the one from twrp it's self and the twrp there has some other features that one from official one has that don't work
This boot image gave me a touchscreen and allowed me to flash a regular twrp: hxxps://f.emvn.me/android-roms-and-stuff/twrp.3.4-kakarot.boot.img
Thanks to whoever made it.
I've owned Samsung, Lenovo and Moto phones before, and I never had any problems unlocking them and flashing custom recoveries and ROMs. This is my 2nd Xiaomi phone and like the 1st I keep bricking and unbricking it. The only thing I can manage to do is sometimes get TWRP on it, or the normal ROM.
- Version: European version of the Redmi Note 11 Pro, codename veux.
- TWRP: https://forum.xda-developers.com/t/twrp-3-7-0_12-for-veux-peux.4520689/
- ROM: https://forum.xda-developers.com/t/rom-13-veux-peux-official-evolution-x-11-09-22.4497785/
___
1st attempt:
1 - After unlocking the bootloader it reinstalled a clean ROM. I then forgot to turn USB debugging on so that was my fault. Because after that I went into fastboot and flashed this TWRP with fastboot flash boot name.img
2 - On this first try I then rebooted to recovery, but it sent me to the normal one instead. In essence I bricked it so I followed this guide to reset it
___
2nd attempt:
1 - I enable USB debugging
2 - go into fastboot: fastboot flash boot name.img
3 - reboot to recovery
4 - in TWRP I try to flash the ROM from the internal storage. It fails after around 33% or something. Errors about not being able to mount certain folders
___
3rd attempt:
1 - reboot to recovery
2 - try and sideload the ROM from my laptop with the command adb sideload name.zip
3 - fails around 40% with similar errors
___
4th attempt:
1 - reboot to bootloader
2 - try instead fastboot boot name.zip to flash the ROM. It gives me the error: requested download size is more than max allowed fastboot
___
In between these tries TWRP sometimes loses touchscreen functionality. I notice when I flash OrangeFox and then TWRP again, I get touchscreen functionality back. I know this is a well known issue but it's interesting I can back TWRP working again when doing the above.
Another interesting is that when I flash OrangeFox and reboot to recovery, it's still TWRP.
When you flash a new ROM, you need to format the userdata and the cache partitions.
EDIT:
Btw, i'm curious to know where you found your OrangeFox build. ^^
Sneilas said:
When you flash a new ROM, you need to format the userdata and the cache partitions.
EDIT:
Btw, i'm curious to know where you found your OrangeFox build. ^^
Click to expand...
Click to collapse
I believe I did format data, cache and dalvik cache as usual. Hm, will check again.
I forgot where I got the OrangeFox from. Might be nothing though.
kerelberel said:
I believe I did format data, cache and dalvik cache as usual. Hm, will check again.
I forgot where I got the OrangeFox from. Might be nothing though.
Click to expand...
Click to collapse
Btw, i do not recommand to flash unofficial images if the maintainer not released it's device tree on GitHub and not linked it on his thread.
We can't know what's inside the recovery.
The recovery can be infected by a malicious code.
Sneilas said:
When you flash a new ROM, you need to format the userdata and the cache partitions.
EDIT:
Btw, i'm curious to know where you found your OrangeFox build. ^^
Click to expand...
Click to collapse
So I made sure to format everything this time. But because I am stoopid I then accidentally sideloaded a MIUI ROM instead of Evolution. I copy/pasted the wrong file name in the cmd window, lol. I was surprised to see the Evolution logo after rebooting, so I got the ROM I wanted by accidentally flashing the other one.
Do I have MIUI on one partition and Evolution on the other? Is that even possible?
kerelberel said:
So I made sure to format everything this time. But because I am stoopid I then accidentally sideloaded a MIUI ROM instead of Evolution. I copy/pasted the wrong file name in the cmd window, lol. I was surprised to see the Evolution logo after rebooting, so I got the ROM I wanted by accidentally flashing the other one.
Do I have MIUI on one partition and Evolution on the other? Is that even possible?
Click to expand...
Click to collapse
From here, i recommand you to ask the maintainer of the Evolution X ROM of your device.
Send him your device infos (code name, processor, etc...).
If you can't access to these info on from phone, contact the reseller of your phone.
Maybe your specific device is not compatible with the ROM.
I'm not enough experienced to help you more.
I don't know if twrp works on veux.
I flashed the boot.img and vendor_boot.img provided by the custom ROM.
The custom ROM was updated using the sideload in recovery mode.
It must be unlocked. USB debug doesn't matter.
Sneilas said:
From here, i recommand you to ask the maintainer of the Evolution X ROM of your device.
Send him your device infos (code name, processor, etc...).
If you can't access to these info on from phone, contact the reseller of your phone.
Maybe your specific device is not compatible with the ROM.
I'm not enough experienced to help you more.
Click to expand...
Click to collapse
I'm fine now, the ROM works, afterwards I also installed Magisk successfully so TWRP works as expected too.
osebee said:
I don't know if twrp works on veux.
I flashed the boot.img and vendor_boot.img provided by the custom ROM.
The custom ROM was updated using the sideload in recovery mode.
It must be unlocked. USB debug doesn't matter.
Click to expand...
Click to collapse
It does, the one I linked in my first post is the one from this specific subforum.
If you need help you can PM me.
Seems like you've managed to fix the problem, and USB debugging only works when you're booted inside the rom, it doesn't do anything in recovery/fastboot.
kerelberel said:
I'm fine now, the ROM works, afterwards I also installed Magisk successfully so TWRP works as expected too.
It does, the one I linked in my first post is the one from this specific subforum.
If you need help you can PM me.
Click to expand...
Click to collapse
Oh ok, i thought you still had problems. ^^
Ritik17 said:
Seems like you've managed to fix the problem, and USB debugging only works when you're booted inside the rom, it doesn't do anything in recovery/fastboot.
Click to expand...
Click to collapse
USB debugging works in some stock/custom recoveries, but in stock recoveries it is limited to sideloading updates signed by the device manufacturer.