Related
Hello, this is my first post
Don't let me waste time...
Requirements
1.Stock boot.img for your phone model (its best its for your Build Number / Variant ) . You can extract from the stock rom / firmware of your device OR backup from your device using a box e.g Miracle box, CM2, etc
2.Download Latest Magisk Manager
Steps on how to root an Elephone P8 Max using Magisk Manager and patched boot.img
Step 1: Patching the stock boot.img
1.Install MagiskManager apk on your android device
2.Copy the stock boot.img of your device to your phone's internal storage or SD card
3.Launch Magisk Manager app
4.If prompted to install Magisk, select NO THANKS
5.If you are using a samsung device and wish to flash using Odin, then select Options > Settings > Update Settings > Patched Boot Output Format > img.tar )
6.Select Install > Install > Patch Boot Image File >
7.Navigate to the location of the stock boot.img you copied earlier on, then Select it
8.Magisk Manager should begin downloading the magisk zip file used for patching
9.Once download is complete, MagiskManager will automatically patch the boot file and store it under SDcard/MagiskManager/patched_boot.img[.tar]
Step 2: Flashing the patched boot.img
You have a variety of options to flash the patched boot.img depending on you
1.Sp Flashtool
2.Fastboot
3.Miracle Box
1. For Sp Flashtool copy the patched boot.img with mt6755 scatter file and make sure to rename patched boot.img to boot.img before flashing
2.For fastboot copy the patched boot.img to your fastboot folder and press shift right click on a free space in the fastboot folder, you would see open command here. Click on it and boot your Elephone P8 Max to fastboot with power+volume up and use volume down to select fastboot and connect your Elephone P8 Max. Your PC type fastboot devices to check if the system as seen it. Now type fastboot flash boot patched_boot.img
You are done.
3.For miracle box rename the file from .img to .bin before flash.
In case you lazy..:laugh:
I have the patched_boot.img here
https://drive.google.com/file/d/17jjlC_znGMEA6HY0H0l4XP6LaBIv7n_t/view?usp=drivesdk
Enjoy..use root checker to confirm
Anyone who can support for custom recovery
TWRP for Elephone p8 Max
I need the newest TWRP for Elephone p8 Max. Can anybody help?
Thanks
Iamkratos said:
Hello, this is my first post
You have a variety of options to flash the patched boot.img depending on you
2.Fastboot
Click to expand...
Click to collapse
Hi I tried fastboot.
fastboot oem unlock OK
fastboot flash recovery patched_boot.img
works, but after switch off an boot into recovery, just normal android 7 starts, no twrp.
When boot finished, touching on display does not work anymore.
Any hinds?
Elephone P8_Max
Android 7.0
Build-Number:
Elephone_P8_Max_20171221
Thanks for any help.
aaaalbi2 said:
Hi I tried fastboot.
fastboot oem unlock OK
fastboot flash recovery patched_boot.img
works, but after switch off an boot into recovery, just normal android 7 starts, no twrp.
When boot finished, touching on display does not work anymore.
Any hinds?
Elephone P8_Max
Android 7.0
Build-Number:
Elephone_P8_Max_20171221
Thanks for any help.
Click to expand...
Click to collapse
Because you flash boot.img as recovery
That why your phone is getting that fault
You are suppose to flash boot
Fastboot flash boot patched_boot.img OK
Or use sp flashtool or miracle box
I included the scatter file
I have the twrp but it doesn't touch only if you use otg with Mouse
Alternative scatter file for MT6750
Hi lmkratos,
thank you very much!
This worked like a charm but I had to use a different scatter file (attached here) as the P8 Max has a MT6750 (not MT6755) and the PMT didn't match so spflash refused to flash boot ("PMT changed for the ROM").
If you happen to be on Linux: spflash works perfectly but take care to stop ModemManager (WAN modems) before flashing as it interferes, so
"service ModemManager stop".
rec Please send it, thank you
Iamkratos said:
I have the twrp but it doesn't touch only if you use otg with Mouse
Click to expand...
Click to collapse
rec Please send it, thank you
---------- Post added at 04:18 AM ---------- Previous post was at 04:16 AM ----------
Iamkratos said:
I have the twrp but it doesn't touch only if you use otg with Mouse
Click to expand...
Click to collapse
twrp Please upload, thank you
Since TWRP is unbootable under this build, you have to use patched boot trick to root this phone.
However, only Magisk 17.1 is usable on this build, Magisk 17.2 - 18.0 can't be installed properly.
So I made a custom update channel that fixed to Magisk 17.1 to assist me.
This guide requires unlocked bootloader - still, I won't introduce how to unlock it here, please Google for it.
Click to expand...
Click to collapse
Here's how to root:
1. Extract the D1C-0-6120-00CN-boot.img from my homebrew firmware written in previous guide, or extract the boot.img from the OTA package.
(Later versions will also provide the patched boot image)
2. Copy this boot.img to Download directory.
3. Install latest Magisk Manager from https://github.com/topjohnwu/Magisk/releases
Remember to allow all the permission after installed.
4. Choose "Left Hamburger Menu" - "Settings" - "Update Channel" - "Custom", and type following URL:
Code:
https://dwz.cn/5I3anBD4
5. Back to Magisk Manager main interface, refresh it and check if latest version changed to 17.1.
Tap "Install" - "Install" - "Patch Boot Image", "Left Hamburger Menu" - "Download" - the boot img you copied.
And wait for the patching procedure complete.
6. Copy patched_boot.img from the Download directory of internal storage to PC.
7. Reboot your phone to fastboot mode and execute following commands:
Code:
.\fastboot reboot-bootloader
.\fastboot boot D:\patched_boot.img
8. Open Magisk Manager, reinstall Magisk 17.1 directly.
9. Reboot your phone and all done.
Is this procedure familiar? Yes, it's the same method used on Nokia 7 Plus. But I wrote this guide to tell you few details that you need to notice.
Hope TWRP can be compiled for D1C-6120.
If you have already unlocked the bootloader then just flash the official TWRP for Nokia 6 and flash the Magisk v17.1 or 17.3 via TWRP normally. And TWRP 3.2.3.0 works well on Android P. I tested it and it works fine.
taicracker said:
If you have already unlocked the bootloader then just flash the official TWRP for Nokia 6 and flash the Magisk v17.1 or 17.3 via TWRP normally. And TWRP 3.2.3.0 works well on Android P. I tested it and it works fine.
Click to expand...
Click to collapse
OK, thanks for the info.
hikari_calyx said:
OK, thanks for the info.
Click to expand...
Click to collapse
I hope you can build TWRP for Android P variant of Chinese and it works on non-unlockbootloader. Like you used to do with Oreo? .Thanks
This did not work with TA-1021 while i have pi installed with twrp and patched boot with magisk 16.1 but it do not work not even root access just keep recovery unchanged(twrp).
It says deviceid locked ple if i patch boot with 17.1 what to do! google pay and banking apps dont work.
hikari_calyx said:
OK, thanks for the info.
Click to expand...
Click to collapse
Can we use official TWRP recovery (3.2.3 made for PLE)
On pie 612H CN - OF YOUR HOMEBREW
and also on 612H ww ??
Please tell
---------- Post added at 06:12 AM ---------- Previous post was at 06:05 AM ----------
taicracker said:
If you have already unlocked the bootloader then just flash the official TWRP for Nokia 6 and flash the Magisk v17.1 or 17.3 via TWRP normally. And TWRP 3.2.3.0 works well on Android P. I tested it and it works fine.
Click to expand...
Click to collapse
Can we install this TWRP recovery on Chinese firmware (or ww firmware of ta-1003)or it can be flashed only on PLE versions
hikari_calyx said:
OK, thanks for the info.
Click to expand...
Click to collapse
Can I install D1C-612H-WW over 612H-CN using OST ??
OST show that the image is broken
hikari_calyx said:
Here's how to root:
1. Extract the D1C-0-6120-00CN-boot.img from my homebrew firmware written in previous guide, or extract the boot.img from the OTA package.
(Later versions will also provide the patched boot image)
2. Copy this boot.img to Download directory.
3. Install latest Magisk Manager from https://github.com/topjohnwu/Magisk/releases
Remember to allow all the permission after installed.
4. Choose "Left Hamburger Menu" - "Settings" - "Update Channel" - "Custom", and type following URL:
Code:
https://dwz.cn/5I3anBD4
5. Back to Magisk Manager main interface, refresh it and check if latest version changed to 17.1.
Tap "Install" - "Install" - "Patch Boot Image", "Left Hamburger Menu" - "Download" - the boot img you copied.
And wait for the patching procedure complete.
6. Copy patched_boot.img from the Download directory of internal storage to PC.
7. Reboot your phone to fastboot mode and execute following commands:
Code:
.\fastboot reboot-bootloader
.\fastboot boot D:\patched_boot.img
8. Open Magisk Manager, reinstall Magisk 17.1 directly.
9. Reboot your phone and all done.
Is this procedure familiar? Yes, it's the same method used on Nokia 7 Plus. But I wrote this guide to tell you few details that you need to notice.
Hope TWRP can be compiled for D1C-6120.
Click to expand...
Click to collapse
On rebooting Android root gone????
dont work for me
edit: worsk now over ND1-612C-0-00WW , but for firm official for n5 (612h-0-00WW ) not works, ist patched the xploit for magisk 17 and up
hikari_calyx said:
Here's how to root:
1. Extract the D1C-0-6120-00CN-boot.img from my homebrew firmware.
9. Reboot your phone and all done.
Is this procedure familiar? Yes, it's the same method used on Nokia 7 Plus. But I wrote this guide to tell you few details that you need to notice.
Hope TWRP can be compiled for D1C-6120.
Click to expand...
Click to collapse
Please help I have working 1003 ww pi installed on Ta-1021 and initially rooted using Chinese twrp with magisk later I tried to install update of twrp recovery got crashed and could not enter recovery tried to flash with Qualcomm tools can enter into Edl phone detected but frimware files doesn't flash some errors. Now result is I can operate my phone magisk 16.1 installed but useless. Banking apps don't work. Factory reset don't work. *#*#874#*#* says file not found (may be because I don't have recovery). Ost la as usual don't work. Please help!
Please help me i am on oreo version .. and i have flashed twrp recovery on my nokia 6 (TA - 1021) ..
THE Problem is when i reboot to recovery it's not booting in twrp but it's booting on custome recovery ..
I need pc everytime , if i want to boot it on twrp .
I have to run command every time to boot in on twrp recovery ..
Is there any way to directly boot it on twrp recovery not in custom recovery ? Please help me
@hikari_calyx Does fastboot boot work for you on pie? For me, it does not. Almost shat my pants thinking my TWRP doesn't work but it does in fact work, just fastboot booting it does not work.
Finally got the official pie update on my TA-1033. (unlocked bootloader)
The standard versions of TWRP 3.2.3.0 / Magisk 17.3 / Magisk Manager 6.0.1 worked perfectly.
As above, "fastboot boot" doesn't work, but "fastboot flash" etc. does.
Happy days.
Not working for me please can you tell the procedure step by step as i tried your steps but didn't happen anything please
---------- Post added at 06:29 PM ---------- Previous post was at 06:26 PM ----------
taicracker said:
If you have already unlocked the bootloader then just flash the official TWRP for Nokia 6 and flash the Magisk v17.1 or 17.3 via TWRP normally. And TWRP 3.2.3.0 works well on Android P. I tested it and it works fine.
Click to expand...
Click to collapse
Not working i have unlocked bootloader but i tried to flash twrp and it's not booting on it any other solution please let me know .
Can you help me please my device is showing me this on my recovery , what's an issue please reply as soon as possible i can't even apply update through sd card or adb it's not detecting everytime it entered to this menu .. please help me
hikari_calyx said:
Here's how to root:
1. Extract the D1C-0-6120-00CN-boot.img from my homebrew firmware written in previous guide, or extract the boot.img from the OTA package.
(Later versions will also provide the patched boot image)
2. Copy this boot.img to Download directory.
3. Install latest Magisk Manager from https://github.com/topjohnwu/Magisk/releases
Remember to allow all the permission after installed.
4. Choose "Left Hamburger Menu" - "Settings" - "Update Channel" - "Custom", and type following URL:
Code:
https://dwz.cn/5I3anBD4
5. Back to Magisk Manager main interface, refresh it and check if latest version changed to 17.1.
Tap "Install" - "Install" - "Patch Boot Image", "Left Hamburger Menu" - "Download" - the boot img you copied.
And wait for the patching procedure complete.
6. Copy patched_boot.img from the Download directory of internal storage to PC.
7. Reboot your phone to fastboot mode and execute following commands:
Code:
.\fastboot reboot-bootloader
.\fastboot boot D:\patched_boot.img
8. Open Magisk Manager, reinstall Magisk 17.1 directly.
9. Reboot your phone and all done.
Is this procedure familiar? Yes, it's the same method used on Nokia 7 Plus. But I wrote this guide to tell you few details that you need to notice.
Hope TWRP can be compiled for D1C-6120.
Click to expand...
Click to collapse
You gave wrong code for booting patched boot.img
It should be as
FASTBOOT FLASH BOOT PATCED_BOOT.IMG
It will permanently root the android pie
You gave the FASTBOOT code only for booting
vineet09i said:
Here's how to root:
1. Extract the D1C-0-6120-00CN-boot.img from my homebrew firmware written in previous guide, or extract the boot.img from the OTA package.
(Later versions will also provide the patched boot image)
2. Copy this boot.img to Download directory.
3. Install latest Magisk Manager from https://github.com/topjohnwu/Magisk/releases
Remember to allow all the permission after installed.
4. Choose "Left Hamburger Menu" - "Settings" - "Update Channel" - "Custom", and type following URL:
5. Back to Magisk Manager main interface, refresh it and check if latest version changed to 17.1.
Tap "Install" - "Install" - "Patch Boot Image", "Left Hamburger Menu" - "Download" - the boot img you copied.
And wait for the patching procedure complete.
6. Copy patched_boot.img from the Download directory of internal storage to PC.
7. Reboot your phone to fastboot mode and execute following commands:
You gave wrong code for booting patched boot.img
It should be as
FASTBOOT FLASH BOOT PATCED_BOOT.IMG
It will permanently root the android pie
You gave the FASTBOOT code only for booting
Click to expand...
Click to collapse
Hey can i use patched boot image on my official update of pie or which version is able to use of magisk?
Emmykay223 said:
Hey can i use patched boot image on my official update of pie or which version is able to use of magisk?
Click to expand...
Click to collapse
You can use the same procedure as hilarious calyx have said in the post
But the FASTBOOT command should be as
FASTBOOT flash boot patched_boot.img
It will permanently root your android
Magisk 17.1 is working
Or you can also flash official twrp available at twrp website and from there you can directly flash magisk 17.1 zip
vineet09i said:
You can use the same procedure as hilarious calyx have said in the post
But the FASTBOOT command should be as
FASTBOOT flash boot patched_boot.img
It will permanently root your android
Magisk 17.1 is working
Or you can also flash official twrp available at twrp website and from there you can directly flash magisk 17.1 zip
Click to expand...
Click to collapse
Yes but twrp is not booting on my pie build because it is showing "failed to find device for partition system" and i am unable to apply update through sd card or through adb i don't know why so i am thinking to follow this steps hope it will work.
vineet09i said:
You can use the same procedure as hilarious calyx have said in the post
But the FASTBOOT command should be as
FASTBOOT flash boot patched_boot.img
It will permanently root your android
Magisk 17.1 is working
Or you can also flash official twrp available at twrp website and from there you can directly flash magisk 17.1 zip
Click to expand...
Click to collapse
Why any module is not installing by magisk it's showing me unable to extract, i followed each and every steps as mentioned above and rooted my Nokia 6 again but it's not installing any module what's the reason behind it?
After installing the OTA update for OxygenOS 11 (15.O.30, IN21AA) I only installed Magisk into the inactive slot and lost root.
I downloaded the original firmware from this thread, extracted boot.img, patched it (using Magisk 20.4 and Magisk Manager 8.0.3 (314)), transferred to PC and renamed it boot.img.
Then I booted using:
Code:
fastboot boot boot.img
After rebooting I still only have two options in Magisk Manager: "Download Zip Only" and "Select and Patch a File". I guess that means I didn't gain root temporarily.
Am I doing something wrong? What can I do to regain root?
TSP7 said:
After installing the OTA update for OxygenOS 11 (15.O.30, IN21AA) I only installed Magisk into the inactive slot and lost root.
I downloaded the original firmware from this thread, extracted boot.img, patched it (using Magisk 20.4 and Magisk Manager 8.0.3 (314)), transferred to PC and renamed it boot.img.
Then I booted using:
After rebooting I still only have two options in Magisk Manager: "Download Zip Only" and "Select and Patch a File". I guess that means I didn't gain root temporarily.
Am I doing something wrong? What can I do to regain root?
Click to expand...
Click to collapse
Always better to use your own boot. Use twrp to backup system. Move backup to pc and extract boot from backup. Move extracted boot to phone. Patch extracted boot with magisk.
Fastboot boot patched_magisk
Once booted you should have temp root. Then use install direct option in magisk 21
crazynapkinman said:
Always better to use your own boot. Use twrp to backup system. Move backup to pc and extract boot from backup. Move extracted boot to phone. Patch extracted boot with magisk.
Fastboot boot patched_magisk
Once booted you should have temp root. Then use install direct option in magisk 21
Click to expand...
Click to collapse
Thanks! Making sure I understand correctly:
Download Unofficial TWRP from this thread (first post in thread says 'no Android 11 support'. Is that a problem?)
fastboot boot twrp.img
Backup system to PC
Extract boot.img from backup using payload_dumper
Patch boot.img using Magisk (I don't have v21 - is that a problem?)
fastboot boot patched_magisk.img > phone reboots with temp root
Direct Install should be available in Magisk, use that to gain permanent root
TSP7 said:
Thanks! Making sure I understand correctly:
Download Unofficial TWRP from this thread (first post in thread says 'no Android 11 support'. Is that a problem?)
fastboot boot twrp.img
Backup system to PC
Extract boot.img from backup using payload_dumper
Patch boot.img using Magisk (I don't have v21 - is that a problem?)
fastboot boot patched_magisk.img > phone reboots with temp root
Direct Install should be available in Magisk, use that to gain permanent root
Click to expand...
Click to collapse
TWRP not support Android 11 yet
For now use Magisk canary version to patch boot.img
---------- Post added at 04:37 AM ---------- Previous post was at 04:35 AM ----------
https://raw.githubusercontent.com/topjohnwu/magisk_files/canary/app-debug.apk
---------- Post added at 04:39 AM ---------- Previous post was at 04:37 AM ----------
fastboot flash boot_a patched_magisk.img
fastboot flash boot_b patched_magisk.img
Bro can I root op9 running derkpest rom it is safe to root and if safe then how to root tell the possible best way guys?
Patched boot.img with magisk, PS when you find derkpest Rom for op9?
iaio72 said:
Patched boot.img with magisk, PS when you find derkpest Rom for op9?
Click to expand...
Click to collapse
Hoo bro from a12 patched img doesn't work I've saw posts so does it work or flashing magisk zip in recovery which is best way to avoid bootloop
Venkata Prathap said:
Hoo bro from a12 patched img doesn't work I've saw posts so does it work or flashing magisk zip in recovery which is best way to avoid bootloop
Click to expand...
Click to collapse
For OOS:
1) Have Magisk Manager v23016 or above installed
2) Download the boot.img from here and put in phone’s Download folder
3) Open Magisk Manager and click top Install and patch boot.img
4) Move patched image to PC’s adb directory
5) Boot phone into fastboot mode and run the command:
fastboot boot magisk_patched_boot.img
6) Phone will boot into temporary root. Click top Install again but choose Direct Install (recommended) this time
7) Reboot when done and profit
For COS:
1) Have Magisk Manager v23016 or above installed
2) Download rooting files and extract on PC
3) Copy boot.img and vendor_boot.img to phone’s Download folder
4) Open Magisk Manager and click top Install and patch boot.img. When done, go back and repeat the process for vendor_boot.img
5) Move both patched images to adb directory on your pc along with vbmeta.img
6) Run this command:
fastboot –-disable-verity —disable-verification flash vbmeta vbmeta.img
********************Make sure it completes without errors before proceeding. If errors, update your ADB: https://developer.android.com/studio/releases/platform–tools
7) If no errors, run these commands:
fastboot flash vendor_boot vendor_boot_magisk.img
fastboot flash boot boot_magisk.img
8) If no errors, run
fastboot reboot
incesu said:
For OOS:
1) Have Magisk Manager v23016 or above installed
2) Download the boot.img from here and put in phone’s Download folder
3) Open Magisk Manager and click top Install and patch boot.img
4) Move patched image to PC’s adb directory
5) Boot phone into fastboot mode and run the command:
fastboot boot magisk_patched_boot.img
6) Phone will boot into temporary root. Click top Install again but choose Direct Install (recommended) this time
7) Reboot when done and profit
For COS:
1) Have Magisk Manager v23016 or above installed
2) Download rooting files and extract on PC
3) Copy boot.img and vendor_boot.img to phone’s Download folder
4) Open Magisk Manager and click top Install and patch boot.img. When done, go back and repeat the process for vendor_boot.img
5) Move both patched images to adb directory on your pc along with vbmeta.img
6) Run this command:
fastboot –-disable-verity —disable-verification flash vbmeta vbmeta.img
********************Make sure it completes without errors before proceeding. If errors, update your ADB: https://developer.android.com/studio/releases/platform–tools
7) If no errors, run these commands:
fastboot flash vendor_boot vendor_boot_magisk.img
fastboot flash boot boot_magisk.img
8) If no errors, run
fastboot reboot
Click to expand...
Click to collapse
for COS: you still only need boot.img and magisk. install magisk patch boot.img temporarily boot on magisk-patchedboot.img and direct install in magisk manager
after the latest apdate 13.0.3 i lose my magisk
and when i want to install it using adb it gives me a boot loop and i shoold to flash the original boot.img
Nb : ramdisk yes
Uninstall it thn flash it using Twrp
twrp can't read internal storage
but when i use the memory card then i click install the recovery restart directly
also by using adb the installation fail in 3%
souhail39 said:
twrp can't read internal storage
but when i use the memory card then i click install the recovery restart directly
also by using adb the installation fail in 3%
Click to expand...
Click to collapse
First flash the original boot image into your phone and make sure your phone can boot after you flash the original boot image.
fastboot flash Magisk-patched-boot.img
Patched boot image can be made on another phone.
https://forum.xda-developers.com/t/4288121/post-85137963
pl1992aw said:
First flash the original boot image into your phone and make sure your phone can boot after you flash the original boot image.
fastboot flash Magisk-patched-boot.img
Patched boot image can be made on another phone.
https://forum.xda-developers.com/t/4288121/post-85137963
Click to expand...
Click to collapse
This is what i did
The original boot run finely but the patched one give me a boot loop
Miui 13 doesn't support yet unless you patch the boot img. Just revert to 12.5.9
souhail39 said:
This is what i did
The original boot run finely but the patched one give me a boot loop
Click to expand...
Click to collapse
The safe way is to not flash boot image with TWRP or Orangefox custom recoveries. Flash with fastboot mode with PC is better to prevent issue.
What version of Magisk?
If you are using the latest Magisk v24.X but it bootloop, you may report issue to Magisk author in his github.
If you used Magisk v23, it is said not working on Android 12, so will not work on MIUI 13.
1. Download stock MIUI rom.
2. Extract two files: boot.img and vbmeta.img.
3. Compress the two files to a TAR file, like: boot_and_vbmeta.tar
4. Copy the TAR file to the device.
5. Open magisk app.
6. Choose "Install magisk to file" and select the TAR file. It will create the file magisk_patched.tar
7. Copy the magisk_patched.tar file to the PC.
8. Extract magisk_patched.tar to get boot_patched.img and vbmeta_patched.img
9. Enter in fastboot in device.
10. Flash boot_patched.img and vbmeta_patched.img to the device:
Code:
fastboot flash boot boot_patched.img
fastboot flash vbmeta vbmeta_patched.img
VD171 said:
1. Download stock MIUI rom.
2. Extract two files: boot.img and vbmeta.img.
3. Compress the two files to a TAR file, like: boot_and_vbmeta.tar
4. Copy the TAR file to the device.
5. Open magisk app.
6. Choose "Install magisk to file" and select the TAR file. It will create the file magisk_patched.tar
7. Copy the magisk_patched.tar file to the PC.
8. Extract magisk_patched.tar to get boot_patched.img and vbmeta_patched.img
9. Enter in fastboot in device.
10. Flash boot_patched.img and vbmeta_patched.img to the device:
Code:
fastboot flash boot boot_patched.img
fastboot flash vbmeta vbmeta_patched.img
Click to expand...
Click to collapse
thx for your answer but always the same problem with patched img files