Related
I still can't get this to work. Unfortunately at my work, we have some corporate policy that keeps me from accessing my wireless tethering connection the tether app creates in modaco's 1.1 rom. Doubt it's anything with the app, but rather I just can't connect to "that type" of connection.
So, that leaves me with USB tethering. No problem at all! But, how do I do it? I'm still getting error 67 codes even though I've got root access. Thanks for help in advance!!
I haven't tested this but these commands (entered either through adb or a terminal emulator on the phone) should get you up and running with USB tethering (make sure you have the drivers installed on your computer from HTC Sync).
su
/system/bin/netsharing net on
echo 4 > /sys/devices/platform/msm_hsusb/usb_function_switch
To turn it off just go into your wireless controls and disable wireless sharing to reset everything.
The easiest way to achieve WORKING WiFi tether is with MoDaCo 1.1. If you've already rooted, you should have used nandroid to create and restore (to make sure your backup works!) a backup. The app "Quick Boot" on the market is the easiest way for you to reboot into recovery mode without having to use adb. If you have a working backup, then you should really try out the ROM, as you can always revert back if something goes wrong! Essentailly, ya got nothing to lose!
P.S. I posted this using Wifi Tether App with MoDaCo Rom 1.1! AWESOME!
lonequid said:
I haven't tested this but these commands (entered either through adb or a terminal emulator on the phone) should get you up and running with USB tethering (make sure you have the drivers installed on your computer from HTC Sync).
su
/system/bin/netsharing net on
echo 4 > /sys/devices/platform/msm_hsusb/usb_function_switch
To turn it off just go into your wireless controls and disable wireless sharing to reset everything.
Click to expand...
Click to collapse
I tried this from a shell last night, and it DID turn on my mobile connection sharing, but I still got error 67's, no differently than if I would have checked the check box in wireless settings. So, it appears this is no dice.
theraginasian said:
The easiest way to achieve WORKING WiFi tether is with MoDaCo 1.1. If you've already rooted, you should have used nandroid to create and restore (to make sure your backup works!) a backup. The app "Quick Boot" on the market is the easiest way for you to reboot into recovery mode without having to use adb. If you have a working backup, then you should really try out the ROM, as you can always revert back if something goes wrong! Essentailly, ya got nothing to lose!
P.S. I posted this using Wifi Tether App with MoDaCo Rom 1.1! AWESOME!
Click to expand...
Click to collapse
I also have MoDaCo 1.1 and while I believe that the wifi tethering DOES work, my work laptop blocks the wireless connection, possibly because it sees it as a peer to peer maybe. In any case, I couldn't tether wirelessly before either in Vista with Windows Mobile either, had to use the USB cable. In all honestly, I like that more anyway because it charges the phone at the same time.
So, anyone that is rooted with a Sprint Hero, can you tether with USB without 67 errors? Thanks in advance!
+1 this thread.
I prefer USB tether to WiFi tether for a couple reasons.
First, it uses less power, so even if your phone is plugged in via USB, it will charge faster.
*EDIT* So, after using the WiFi tether app with my phone plugged in via USB and my laptop plugged in, my phone was LOSING battery, albeit at a slower rate.
Second, I used to get lower ping times with my phones tethered via USB when I had a Blackberry and a Palm Pre (usually 90-130 ms) With the WiFi tether, I seem to be getting 150-230 ms ping times.
Third (and I don't know if this is the same for everyone else, but) I'm getting only 0.8-1.2 mbps down speeds and only 0.2-0.5 mbps up speeds.
So yeah, if people would still keep looking for a mobile network sharing exploit, I'd greatly appreciate it
Then plug it up to the a/c charger. USB charges slower regardless. Only way I know of tethering with usb is to use tetherbot and that isn't true tethering as it uses a SOCKS proxy and you have to have the SDK on the computer. Not to mention you'll be stuck with Firefox unless you can configure the proxy for other programs. There was some other workaround posted on here though.
Just because you've rooted doesn't mean it removes Sprint's system of how people tether. They use a two-NAI system. 1st NAI = your normal data username and password. 2nd NAI = Your PAM (Phone-As-Modem) password which is issued when people have that add-on on their plan, which can't be added to the Everything Data plans.
ajones7279 said:
Then plug it up to the a/c charger. USB charges slower regardless. Only way I know of tethering with usb is to use tetherbot and that isn't true tethering as it uses a SOCKS proxy and you have to have the SDK on the computer. Not to mention you'll be stuck with Firefox unless you can configure the proxy for other programs. There was some other workaround posted on here though.
Click to expand...
Click to collapse
The point the original poster was making is that WiFi tether is not an option for them. Since I'm in the same boat a USB Tether option (if it was ever discovered) would be useful. I don't think it's a ridiculous question to ask if there was a way to do it. I've USB Tethered with my iPhone and Nokia E71 without a problem.
Like the original poster my corporate laptop's security policy does not allow me to connect to an Ad-Hoc network, like the one created through WiFi tether.
ajones7279 said:
Then plug it up to the a/c charger. USB charges slower regardless. Only way I know of tethering with usb is to use tetherbot and that isn't true tethering as it uses a SOCKS proxy and you have to have the SDK on the computer. Not to mention you'll be stuck with Firefox unless you can configure the proxy for other programs. There was some other workaround posted on here though.
Just because you've rooted doesn't mean it removes Sprint's system of how people tether. They use a two-NAI system. 1st NAI = your normal data username and password. 2nd NAI = Your PAM (Phone-As-Modem) password which is issued when people have that add-on on their plan, which can't be added to the Everything Data plans.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=4960553#post4960553
http://code.google.com/p/android-wired-tether/
This app is the wired version of the Wireless tether that comes installed on the MoDaCo rom.
I've been following this app recently, and have it installed on the Hero, but of course since it was ported for the G1 only, it doesn't work on our Hero. It's interesting because it was created with pieces from the Hero in the first place. It says on the site that it will tell you that you do not have the proper kernel installed if that requirement isn't met, and I'm NOT receiving that message.
In fact, everything seems to go just fine when I launch the app, and allow root access. It's right after that where I get a FC as the app is trying to access the system settings menu.
Any smarties out there that would care to take a stab at how we could get this working for both the GSM and CDMA Hero?
Why not use PdaNet it seems to work fine on my laptop. I do have a question on tethering however either wireless or usb. Is it ok to do this on a Sprint everything data plan or do I have to upgrade to something else. If I tether without upgrading will I see a large charge on my bill? I do not use it much if ever but was just wondering if this would effect my bill.
redram38 said:
Why not use PdaNet it seems to work fine on my laptop. I do have a question on tethering however either wireless or usb. Is it ok to do this on a Sprint everything data plan or do I have to upgrade to something else. If I tether without upgrading will I see a large charge on my bill? I do not use it much if ever but was just wondering if this would effect my bill.
Click to expand...
Click to collapse
If PDANet wasn't 30 bucks, I'd gladly consider it. However, I've been tethering over USB with all of my Sprint phones for goodness knows how long, with no problems.
With your everything data plan, you shouldn't see any problems at all. The wired tether app basically just starts an adhoc wireless connection, and then funnels through your data connection to the laptop connected to it. To the data line, and to Sprint, it's no different than an app using data.
In essence, this is how ANY wired USB app should eventually work from a tethering standpoint. Yes, Sprint uses a two tiered NAI system to control data and PAM. However, the trick ALWAYS has been to have the phone not report/act that it's using PAM, rather just turn on mobile sharing and funnel through the internet connection. This is how it worked with Windows Mobile phones too, and eventually will be the same with our Hero. It will have to eventually be done on the Application level, rather than using mobile connection sharing through settings. When this is activated, the Hero attempts to use the PAM settings. We'll either have to remove this somehow, or do it all through the app itself. It will have to be a "middle man" of sorts, isolating the incoming data line, and then acting as a liaison to push it through the USB to the laptop.
That's how I understand it in my head, anyway
I'm not sure what triggers it, but most of the time that command line works for tethering for me (which is why I originally posted it). About one in five times I get the error 67.
CapnBry said:
I'm not sure what triggers it, but most of the time that command line works for tethering for me (which is why I originally posted it). About one in five times I get the error 67.
Click to expand...
Click to collapse
So, can you help clarify your workflow for using it? Are you running it from an ADB Shell on your laptop, or are you launching it from a terminal emulator on your Hero? Also, do you have any wireless settings modified (such as hybrid vs. 1x only) or do you have the mobile network turned off first?
Or, are you more simply just running this from a shell while everything is up and running as normal?
Thanks in advance!
FYI, you can use PdaNet for free WITHOUT paying for it. You only are required to pay for it for any use other than HTTP://. FTP use isn't really a good idea anyway because if Sprint see's you're tethering too much data, they'll know you're tethering and cut you.
mrinehart93 said:
FYI, you can use PdaNet for free WITHOUT paying for it. You only are required to pay for it for any use other than HTTP://. FTP use isn't really a good idea anyway because if Sprint see's you're tethering too much data, they'll know you're tethering and cut you.
Click to expand...
Click to collapse
Hmm...I guess I didn't know that. Thanks a lot! This should work until we get a rooted solution.
mrinehart93 said:
FYI, you can use PdaNet for free WITHOUT paying for it. You only are required to pay for it for any use other than HTTP://. FTP use isn't really a good idea anyway because if Sprint see's you're tethering too much data, they'll know you're tethering and cut you.
Click to expand...
Click to collapse
Not necessarily. I was tethering daily at one point and they never said a word. This includes browsing and downloading 1gb+ torrents.
Mmmh ... you guys could try this application:
http://code.google.com/p/android-wired-tether/
This is 99% based on "Wireless Tether for Root Users" and might work. I've never tested it on a hero. I have it running on a G1 and Magic ... both with a patched kernel - these patches came from Zinx Verituse and the hero-kernel was base for this port.
No idea if it really works ... but you could try.
harry_m said:
Mmmh ... you guys could try this application:
http://code.google.com/p/android-wired-tether/
This is 99% based on "Wireless Tether for Root Users" and might work. I've never tested it on a hero. I have it running on a G1 and Magic ... both with a patched kernel - these patches came from Zinx Verituse and the hero-kernel was base for this port.
No idea if it really works ... but you could try.
Click to expand...
Click to collapse
Hi harry, I've unfortunately not had this work quite yet, I get a force close from the system settings this app is trying to access. My guess is that the kernel isn't patched for it. We might have to request this in future CDMA Hero roms. Thanks!
kmartburrito said:
Hmm...I guess I didn't know that. Thanks a lot! This should work until we get a rooted solution.
Click to expand...
Click to collapse
I got it for free as well.
I can confirm that the USB tether using the command line works for me. I'm getting 1.28Mb/s down and 0.48Mb/s up.
[HOW-TO] Enable Wifi and USB Tethering on AT&T Samsung Galaxy S4 with Android 4.3 MK2
After some research on various forums including this one, I got both Wifi and USB Tethering working on my AT&T Samsung Galaxy S4 with Android 4.3 (build MK2). Figure others may look for similar solutions so I put together the steps I used in this post.
1. Background
I have been tethering with SVTP (paid version) since acquiring the Galaxy S4 in June 2013, with my unlimited data plan. Then it stopped working after a week when AT&T pushed out the software update. Furious, I googled around and found the "Click the home button when the checking popup appears" trick, and had been happily tethering, until AT&T push another update (MK2) two weeks ago. It defeated that trick and none of the tethering apps work. Oh man, not again!
I googled again and found FoxFi. The wifi tethering didn't work (it only work on Verizon as reported(), but the USB and Bluetooth tethering do work. I am relived as I had a temporal solution. However, both the USB and Bluetooth tethering drop and resume the internet connection every minute. Very annoying when downloading a bigger file, or playing online games that require constant connection. Finally can't stand it anymore. I keep googling around and found there's no other solution except rooting the device. And I decide to take the risk and give it a shot.
2. Result
After following the steps, I was able to get all tethering apps works. Specifically all these works;
SVTP
ES File Manager
FoxFi
And, the native Tethering from the phone also work. This give me the hint that probably most, if not all, tethering apps should work.
Furthermore,the built-in USB tethering also work! Unlike the one from FoxFi, this one work continuously without dropping/resuming the connection every minute. This can be handy as you can charge your phone while tethering. Pretty cool, uh?
Last but not least, I disable the AT&T Software update, so I don't have to do this again
3. Steps
Here's the steps I used. I piece them together from various sources. Many thanks to the folks who put them together, and to the folks who tried before me and post the positive result. Basically you need do to a few things:
a. Root the device
b. Modify the tethering file
c. Turn on tethering and verify it works
d. Disable the AT&T Software update (Optional)
Please see the next post for details.
Steps
a. Root your device
Scary, isn't it? I was in the same boat and really hesitated to do it. However with no other option available it may worth a try. It does work well and give you good control of the phone. Worthy in my opinion, especially when it allows you to do what you want to do.
a1. If you are new to rooting your phone like me, some background reading may help:
http://www.kingoapp.com/help/android-rooting.htm
https://sites.google.com/site/tomsgt123/all-videos/samsung-galaxy-s4
a2. Watch this video as a preparation and confidence building:
http://www.youtube.com/watch?v=uii_mYm8IGE&feature=youtu.be
a3. Root your device using the steps here. It echoes the steps in the video. Even though it is made for the Verizon model, it works on AT&T too:
http://forum.xda-developers.com/showthread.php?t=2565758
b. Modify the tethering file:
b1. Follow the steps in the post. It works:
http://forum.xda-developers.com/showthread.php?t=2535141
b2. Pay attention to the mount /system as RW mode step. It is missing in the original post:
"I was not able to rename files or copy until I change 'Mount R/W'.
To do this, you click on globe/phone on top left corner.
Scroll down to "Root Explorer" and hold for a second or two.
When you let go, a pop-up screen appears. Click on Mount R/W,
and change "/system" from OR to RW."
http://forum.xda-developers.com/showpost.php?p=48950107&postcount=87
c. Verify tethering works
c1. Use your favorite tethering app, it should work. Just disregard the AT&T Popup (click OK).
And if you don't use any tethering app before, rest at ease. Your phone's native Wifi and USB tethering also work. That maybe the best part as you don't need to purchase any "unlocked" version of those apps. Just go to "Settings->More networks->Tethering and portable hotspot". Turn on Mobile Hotspot and you can use Wifi tethering as usual.
c2. Or while at the same screen, connect your phone to the laptop with a USB cable and enable "USB tethering". Your laptop will automatically install a USB driver and you will be connected to the internet via USB. This option works especially well when all you need is connect one laptop to the internet. It not only saves the battery of your phone by not using Wifi, but also charge your battery while tethering!
c3. Stil not enough? How about make your laptop a wifi hotspot? Follow the steps here:
http://lifehacker.com/5369381/turn-your-windows-7-pc-into-a-wireless-hotspot
This way, you charge your phone while tethering using USB, your laptop is on the web, and others can connect to the internet via the Wifi hotspot on your laptop. It is a win-win-win situation
d. Finally, if you don't want to be annoyed in the future and redo all these again (which may or may not work anymore as they may close the door), turn of AT&T Software update. Follow the steps here:
Stopping AT&T Auto Software Update
Download and install "App Quarantine ROOT/FREEZE" from Play Store.
Open the app and go to settings by tapping on the wrench icon at the top right of the screen.
Uncheck the "Hide system services" option.
Go back to the app and select "AT&T Software update".
Tap on the lock icon on the top right of the screen.
It may ask you to enable the USB debugging.
Feel safe from AT&T's new attack
http://forum.xda-developers.com/showthread.php?t=2387577
Again, many thanks to those who put the information together, and to those who tried it and proved it worked. You guys are great! Happy new year and happy tethering!
Good job!
I'm sure a lot of people will benefit from this.
I can verify that this method works perfectly for my ATT S4 Active ML2 - thank you!!!
Just found this thread today, I've been planning on rooting my phone for some time now and tethering is one of the biggest reasons why.
I just wanted to confirm that this fix has allowed you to tether using the native tethering function in android with an unlimited (grandfathered) AT&T data plan and you haven't had any problems with AT&T harassing you about it. I'm in the same boat and don't want to lose my unlimited data as I've heard as happened to some people.
Also thanks for the guide!
Does anyone know if this will work on non samsung AT&T phones. Like the HTC M8?
ProdigalHacker said:
Just found this thread today, I've been planning on rooting my phone for some time now and tethering is one of the biggest reasons why.
I just wanted to confirm that this fix has allowed you to tether using the native tethering function in android with an unlimited (grandfathered) AT&T data plan and you haven't had any problems with AT&T harassing you about it. I'm in the same boat and don't want to lose my unlimited data as I've heard as happened to some people.
Also thanks for the guide!
Click to expand...
Click to collapse
Yes, it works fine with the AT&T unlimited data plan.
So..moving from Android to Windows is pretty awesome except that Windows is just way to good at locking down their hardware. Verizon just adds insult to I injury when it comes to using my unlimited data which I will never give up until they decide to drop me.
Anyway, if anyone is interested I have figured out how to tether the 8x via USB (and at pretty decent speeds) but have still been searching for any sort of workaround for the ICS that VZW thinks unlimited users shouldn't be allowed to have for free. I could just go pay the $5 for Tether-X or whatever but I hear it takes a lot of setup on the computer end which is just a hassle and not convenient seeing that my home computer already has fast internet. I've had a few ideas...
First, for those who are interested in USB tethering. It involves enabling Diag Mode (##634#) so your PC will recognize it as a USB Composite Device. The problem here is the drivers. I searched all over and finally came across the 8x-specific drivers for the PC to recognize it as a modem. Message me if you are interested in the details to setting that up. Now to the hotspot question...
From what I've read, there used to be a way to go into your EPST settings (##778#) and change the DUN NAI in the default W.IP profile to bypass the block. The problem here is that you cannot edit these settings because VZW(HTC?) decided that people shouldn't be able to play with the device they paid so much for to keep their unlimited data. Does anyone know any tricks to unlock editing in these sections of the EPST? Any other workarounds that anyone has heard of? Please don't say such things as "move to a shared plan" or "pay for the hotspot"...I waited for this phone to come down in price so I could buy it out-of-pocket just for the fact that I could keep my unlimited data. And it wouldn't really be unlimited if I had to pay more to use ICS, now would it? Besides, it's not a necessity, just something that would be convenient. I have faith that WP8 will be cracked soon so I can enjoy it like the old days where the native file system was open for modification.
NeMisiz said:
So..moving from Android to Windows is pretty awesome except that Windows is just way to good at locking down their hardware. Verizon just adds insult to I injury when it comes to using my unlimited data which I will never give up until they decide to drop me.
Anyway, if anyone is interested I have figured out how to tether the 8x via USB (and at pretty decent speeds) but have still been searching for any sort of workaround for the ICS that VZW thinks unlimited users shouldn't be allowed to have for free. I could just go pay the $5 for Tether-X or whatever but I hear it takes a lot of setup on the computer end which is just a hassle and not convenient seeing that my home computer already has fast internet. I've had a few ideas...
First, for those who are interested in USB tethering. It involves enabling Diag Mode (##634#) so your PC will recognize it as a USB Composite Device. The problem here is the drivers. I searched all over and finally came across the 8x-specific drivers for the PC to recognize it as a modem. Message me if you are interested in the details to setting that up. Now to the hotspot question...
From what I've read, there used to be a way to go into your EPST settings (##778#) and change the DUN NAI in the default W.IP profile to bypass the block. The problem here is that you cannot edit these settings because VZW(HTC?) decided that people shouldn't be able to play with the device they paid so much for to keep their unlimited data. Does anyone know any tricks to unlock editing in these sections of the EPST? Any other workarounds that anyone has heard of? Please don't say such things as "move to a shared plan" or "pay for the hotspot"...I waited for this phone to come down in price so I could buy it out-of-pocket just for the fact that I could keep my unlimited data. And it wouldn't really be unlimited if I had to pay more to use ICS, now would it? Besides, it's not a necessity, just something that would be convenient. I have faith that WP8 will be cracked soon so I can enjoy it like the old days where the native file system was open for modification.
Click to expand...
Click to collapse
Try this, I enabled WiFi Internet sharing in my Verizon 8X: http://forum.xda-developers.com/showpost.php?p=52490701&postcount=5
I have unlimited high speed data with T-Mobile but only 5GB mobile hotspot.
I want to use USB tether to my PC without the carrier knowing. I don't want carrier to know or else it will use up my 5GB hotspot. Is it possible to tether without the carrier knowing and using up my 5GB hotspot?
What is the difference between the built in tethering method of my BlissPop ROM vs. the ClockworkMod Tether app? Will the ClockworkMod Tether app prevent the carrier from knowing?
I use PdaNet+ with my phones and unlimited T-Mobile highspeed plan. I haven't tried ClockworkMod Tether, so I can't speak for it, but it sounds like it works the same way. Both use a companion program on the PC. With PdaNet there is an option in PC application to "hide tether usage", which creates a sort of VPN that blocks the carrier from knowing what your data is being used for. I don't know how this option is set up in CWM Tether, but by its description it has the same function. No obnoxious user agent masking plug-ins to mess with
Both have a trial version, so give them a try before deciding which one you prefer. PdaNet's trial works for ~10 minutes before turning off (you can turn it on again), CWM's works for 14 days before limiting you to 20MB/day. You might have only have one installed at any given time though, as having both might cause complications.
I use about 300GB/month with my T-Mobile high speed plan. Saves me hundreds of dollars a year not needing home internet (I live alone). I browse, stream Amazon Prime, view risque pictures of attractive females, download torrents, etc. Never been throttled, cut off, gotten angry emails, or anything.
Even more fun is that you can run WiFi Tether Router (by Fabio Grasso) at the same time and give your other devices (if you have any) at the same time. However, this is murder on your battery. Wifi tethering takes a ton of juice, so your devices is constantly charging while discharging (sometimes not fast enough, and it discharges faster than it charges). Because of this, I'd recommend using a cheap phone with a removable battery (I use a Galaxy Light). I've already blown up (not quite literally) 2 batteries on my Galaxy Light doing this, so I wouldn't recommend doing this with a phone like the OnePlus One where the battery isn't easily replaceable. Not for an extended period of time, anyway. You don't need to worry about this if you're only USB tethering. It takes extremely little juice and doesn't create any heat other than typical charger and data use.
The one caveat I've found with using PdaNet is that Netflix won't load while you're USB tethered. Whatever the PC program does to mask your data messes with Microsoft Silverlight, and you'll get taken to the page about minimum required specs and browser versions. The way around this is to disable the "hide tether usage" option, load the video, then once it starts loading (the red ring), hide the tether usage again. It's a PITA, and you have to remain vigilant about re-hiding the usage, or you'll obliviously and quickly use up your tethering allotment. Small price to pay though, right? I don't know if the ClockWorkMod Tether app has this problem. I don't have Netflix anymore, so I can't check. Amazon Prime doesn't have this issue.
I can't speak for the tethering method within BlissPop, or any other ROM. I know carriers often disable and/or hijack the tethering that is natively built into Android. But without a companion program PC side, like PdaNet and CWM Tether offer, I'd expect that it'd count against the tethering allotment.
Planterz said:
I use PdaNet+ with my phones and unlimited T-Mobile highspeed plan. I haven't tried ClockworkMod Tether, so I can't speak for it, but it sounds like it works the same way. Both use a companion program on the PC. With PdaNet there is an option in PC application to "hide tether usage", which creates a sort of VPN that blocks the carrier from knowing what your data is being used for. I don't know how this option is set up in CWM Tether, but by its description it has the same function. No obnoxious user agent masking plug-ins to mess with
Both have a trial version, so give them a try before deciding which one you prefer. PdaNet's trial works for ~10 minutes before turning off (you can turn it on again), CWM's works for 14 days before limiting you to 20MB/day. You might have only have one installed at any given time though, as having both might cause complications.
I use about 300GB/month with my T-Mobile high speed plan. Saves me hundreds of dollars a year not needing home internet (I live alone). I browse, stream Amazon Prime, view risque pictures of attractive females, download torrents, etc. Never been throttled, cut off, gotten angry emails, or anything.
Even more fun is that you can run WiFi Tether Router (by Fabio Grasso) at the same time and give your other devices (if you have any) at the same time. However, this is murder on your battery. Wifi tethering takes a ton of juice, so your devices is constantly charging while discharging (sometimes not fast enough, and it discharges faster than it charges). Because of this, I'd recommend using a cheap phone with a removable battery (I use a Galaxy Light). I've already blown up (not quite literally) 2 batteries on my Galaxy Light doing this, so I wouldn't recommend doing this with a phone like the OnePlus One where the battery isn't easily replaceable. Not for an extended period of time, anyway. You don't need to worry about this if you're only USB tethering. It takes extremely little juice and doesn't create any heat other than typical charger and data use.
The one caveat I've found with using PdaNet is that Netflix won't load while you're USB tethered. Whatever the PC program does to mask your data messes with Microsoft Silverlight, and you'll get taken to the page about minimum required specs and browser versions. The way around this is to disable the "hide tether usage" option, load the video, then once it starts loading (the red ring), hide the tether usage again. It's a PITA, and you have to remain vigilant about re-hiding the usage, or you'll obliviously and quickly use up your tethering allotment. Small price to pay though, right? I don't know if the ClockWorkMod Tether app has this problem. I don't have Netflix anymore, so I can't check. Amazon Prime doesn't have this issue.
I can't speak for the tethering method within BlissPop, or any other ROM. I know carriers often disable and/or hijack the tethering that is natively built into Android. But without a companion program PC side, like PdaNet and CWM Tether offer, I'd expect that it'd count against the tethering allotment.
Click to expand...
Click to collapse
Thanks for the great detailed insight! I'll give pdanet+ a try. Btw, do you know if T-mobile allows you to track how much of the mobile hotspot data you have used?
I am curious to know if custom ROMS such as BlissPop prevent the carrier from knowing when using the native Android tethering. What if I use a VPN on my phone or on my PC along with the native Android tethering. Will the carrier find out?
Zythyr said:
Thanks for the great detailed insight! I'll give pdanet+ a try. Btw, do you know if T-mobile allows you to track how much of the mobile hotspot data you have used?
Click to expand...
Click to collapse
As long as there's a T-Mobile SIM card in the phone, you can download their account app. It tells you your minutes, messages, data usage (including tethering), when your bill is due, etc. You can pay your bill through it too. I find it to be very useful. Just make sure you turn off all the diagnostics and notifications. Not because they'll learn anything you don't want them to know, but because they're obnoxious and useless.
I know it's an old question but I'll post a response for those who arrive here via a Google search. It's incredibly simply to get around the carrier limitation. Follow the instructions in this link below which, while very detailed because they want to reach a wide audience, explains how to solve the problem. You just need to add a record to a database file. It's that simple. If you're an expert then just skip to the end of the tutorial for the database that needs to be edited and for the record that needs to be added. I tried this on my Note 4 on T-Mobile. I was throttled and after making this edit I'm back to full speed.
http://nexus5.wonderhowto.com/how-to/tether-your-nexus-5-without-your-carrier-knowing-0155546/
Quick edit: the battery drain is an issue but is easily solved with either additional batteries or with a phone/charger combo that allows for fast charging. With a fast charger on my Note 4 I easily stay ahead of the battery drain.
I use and am currently using clockwork tether in conjunction with nord vpn Most of the vpn servers are very stable I always link up with them for several days to make sure it is not killing the connection before I link it on my phone but it works great. All the traffic going through the isp is encrypted so they cant tell that I am hooked up to the xbox servers on my phone there is no way to tell that it is not regular phone traffic. If you are going to do this I would deffinitely reccomend spending the money fo a good vpn service. You will not be able to game over this connection but download speeds are good. I get nord vpn servvice for less than 3 dollars a month when I buy their 2 year plan for like 71 bucks. They havve servers all over the world and it also protects me from any backlash I might see due to my heavy p2p dowloading. Clockwork tether is great because it will utilize lte networks not just the 3g networks and it does not require any root access. I am currently on lg g6 through sprint so root will be a while out if ever (encrypted bootloader) but I can still utilize my unlimited lte data. I also have a grandfathered data line with them that is unlimited but they will not let me upgrade to lte. When they let 4g wimax die i was downgraded to nothing but 3g on that line but I cant give it up because I use 250 to 300 gigs a month on just it. I had a lot of problems with the wifi air cards because of the high discharge rates and heat problems but have solved that by going to the old 3g computer dongles now and running them directly into openwrt router. Good enough to play call of duty on but not good for download speeds and if my wife is looking up a recipe for dinner it lags out. Thus I use the tethering for all downloads and the data only line for regular traffic that is permitted. (Not pirating vvideos because i dont want to give them a reason to kick me off my unlimited plan) n0sec
So i've been a user of xda for quite sometime, however i never really contributed before so i'd like to share my latest discoveries and hopefully i can help someone in the future.
(Please note this is for intermediate users i will not be going into full details. Feel free to google any keywords here for further information)
Please note this will erase your device!
Disclaimer: I am not responsible for anything you do to your device ie: damages. Proceed at your own risk
This is a tutorial on how to get unlimited tethering on an LG V10 Tmobile
First you will need to unlock bootloader and get TWRP so you can flash SuperSU and get root.
I used a combination of these two guides. DOTtech i just used to get LGUP. I do not believe the .kdz (refurbish) step is necessary.
https://dottech.org/198032/how-to-root-lg-v10-t-mobile-h901-on-android-6-0-marshmallow/
http://forum.xda-developers.com/tmobile-lg-v10/general/root-android-6-0-h901-t3382819
make sure you use this .tot file from xda (most updated, July) link
once you have flashed the tot file. make sure you download supersu and save it on your phone. Link Here .You will need to boot into recovery mode. The best way i found to boot into recovery mode is to use "adb reboot recovery" command via adb command terminal. For help on setting up adb, usb debugging, and oem unlock. follow the youtube video below. Do not follow his recovery flash steps. (That is Outdated!). once you have adb set up, phone on, open a terminal, navigate to your adb folder and run the "adb reboot recovery" command. Phone will boot into TWRP. Find your SuperSU file. Flash it. You are now rooted!
https://www.youtube.com/watch?v=PPLwFGxLQA4
once you have root....
you will need wifi tether router from fabio grasso. Buy it. best money ever spent.
next you will need to edit your build prop.
download es file explorer. build prop is just a text file. enable root explorer in es file explorer. navigate to your root folder/system.
under system you will find build.prop. open with es text editor. at the end of the text file insert
net.tethering.noprovisioning=true
hit back. and it will ask you to save. save it!
This will allow our wifi tether router app to work properly.
reboot your phone.
open your wifi tether router app. The most important setting here is under method. Use Native! This will tell wifi tether router to port it's connection through your native hotspot app.
You should now be ready to go.
Now, how do we prevent Tmobile from noticing our traffic is being tethered?
We need to change a few settings on our computers. You will want to change your defaultTTL to 65 (decimal) on all your PCs.
For details on that follow this youtube video
https://www.youtube.com/watch?v=PZOqm98kzIU
for windows 10 its a little bit different. Use this command in a terminal.
netsh int ipv4 set glob defaultcurhoplimit=65
This should prevent Tmobile from noticing and counting your hotspot data.
If i missed anything, please feel free to message me along with any other questions.
Cheers!
Hi,
What are your setup parameters for Wi-Fi Tether?
Sent from my LG-H901 using XDA-Developers mobile app
Encryption wpa2-psk
wifi channel 1
interface wlan0
method 4 -native tether
auto disconnect wifi when start tethering (check)
wifi scanning autodisabler (check)
i also root disabled all tmobile apps especially com.tmobile.pr.adapt
Good Luck!
When was the last time you've checked your usage? I'm using a vpn (in addition to build.prop and settings.db "hacks") as well, so not sure how they see it now. I'll change my TTL on the pc as next precaution. Vpn used to be the bullet proof method, but they're getting sneakier.
RussianBear said:
When was the last time you've checked your usage? I'm using a vpn (in addition to build.prop and settings.db "hacks") as well, so not sure how they see it now. I'll change my TTL on the pc as next precaution. Vpn used to be the bullet proof method, but they're getting sneakier.
Click to expand...
Click to collapse
My apologies to everyone, i guess my post was a little premature. I just got the text message today saying i've used 80% of my mobile hotspot. RussianBear, i am interested in your settings.db hack. What is the purpose of that hack, and also what vpn do you use?
The TTL was a game changer for me with my S5. The problem i am running into with the LG V10 is that in the wifi tether router app, the hostapd method would not work anymore. I "enable wifi router" and i can't see my hotspot.
Russianbear, how far along have you gotten with this. Maybe we can help each other. Can you see your hotspot via wifi tether router? What are your wifi tether router settings? The only way i was able to activate it was with the Native method, however i believe the native hotspot embedded with the phone sends packets to tmobile.
I was wondering also if a custom rom can help me in this situation. It seems as though the native hotspot does not allow third party apps like "wifi tether router" to activate the hotspot. Can anyone recommend a good stable custom rom that can help me accomplish this?
Cheers!
jontav said:
My apologies to everyone, i guess my post was a little premature. I just got the text message today saying i've used 80% of my mobile hotspot. RussianBear, i am interested in your settings.db hack. What is the purpose of that hack, and also what vpn do you use?
The TTL was a game changer for me with my S5. The problem i am running into with the LG V10 is that in the wifi tether router app, the hostapd method would not work anymore. I "enable wifi router" and i can't see my hotspot.
Russianbear, how far along have you gotten with this. Maybe we can help each other. Can you see your hotspot via wifi tether router? What are your wifi tether router settings? The only way i was able to activate it was with the Native method, however i believe the native hotspot embedded with the phone sends packets to tmobile.
I was wondering also if a custom rom can help me in this situation. It seems as though the native hotspot does not allow third party apps like "wifi tether router" to activate the hotspot. Can anyone recommend a good stable custom rom that can help me accomplish this?
Cheers!
Click to expand...
Click to collapse
I'm using private internet access vpn. Not currently using any play store apps, just my native usb/wi-fi tether, but it looks like they upped their game this month, as I've already ran out of hotspot data lol
The settings db "hack" was forcing zero flag inside a settings database. In MM it was moved to this location:
/data/system/users/userid/settings_[system|global|secure].xml"
On V10 it's under global.xml - search for tether_dun and make sure that's 0.
You can also try using adb or terminal emulator and execute commands found here:
https://pmf.silvrback.com/fixing-tethering-on-android-kitkat
I'm using the same settings but my usage keeps going up
Sent from my LG-H901 using XDA-Developers mobile app
I have to find a way to get wifi tether router working on this phone. Wifi tether plus DefaultTTL will fix this. If anybody tries wifi tether and gets it to work with LG V10 please let me know. Maybe its my phone. I did use the .tot file in this thread
http://forum.xda-developers.com/tmobile-lg-v10/general/root-android-6-0-h901-t3382819
I'm thinking maybe that might have corrupted something and is not letting me activate my hotspot via wifi tether router.
Looks like adjusting ttl has worked for now.
RussianBear said:
Looks like adjusting ttl has worked for now.
Click to expand...
Click to collapse
Can you please explain where and how you did this?
I'll try this, but dont think it will work. I've used Wifi Tether Router alot before, but that was before Tmo started cracking down on heavy tether users not too long ago. Now if I try to use it, they always notice quickly. I also did the no provisioning trick but same results. I created a new APN with a guide I found, same thing. I didnt change any values on my other devices' end. I've heard it helps if you use a different DNS server but dont know for sure. It may also help if you use a different user agent.
I do believe the days of unlimited tethering with Tmo are over, I've tried lots of tricks but didnt get far.
luckydog98 said:
Can you please explain where and how you did this?
Click to expand...
Click to collapse
use the video from the op above.
AnonVendetta said:
I'll try this, but dont think it will work. I've used Wifi Tether Router alot before, but that was before Tmo started cracking down on heavy tether users not too long ago. Now if I try to use it, they always notice quickly. I also did the no provisioning trick but same results. I created a new APN with a guide I found, same thing. I didnt change any values on my other devices' end. I've heard it helps if you use a different DNS server but dont know for sure. It may also help if you use a different user agent.
I do believe the days of unlimited tethering with Tmo are over, I've tried lots of tricks but didnt get far.
Click to expand...
Click to collapse
Invest into a good vpn service.
@RussianBear: I actually use a VPN on my phone most of the time. However, by default, Android wont direct tethering to a VPN. I found a guide awhile back that shows how to use terminal commands to forcibly route through a VPN, it worked for quite awhile, but Tmo caught on eventually. I made sure the VPN and my script were already running before activating tethering. A VPN is supposed to be encrypted, so how they detected ne is beyond me. I guess they saw the sheer amount of data I was using and suspected tethering (over 500GB in one month, at the highest point).
AnonVendetta said:
@RussianBear: I actually use a VPN on my phone most of the time. However, by default, Android wont direct tethering to a VPN. I found a guide awhile back that shows how to use terminal commands to forcibly route through a VPN, it worked for quite awhile, but Tmo caught on eventually. I made sure the VPN and my script were already running before activating tethering. A VPN is supposed to be encrypted, so how they detected ne is beyond me. I guess they saw the sheer amount of data I was using and suspected tethering (over 500GB in one month, at the highest point).
Click to expand...
Click to collapse
Can you not enable vpn on the clients instead? I have my asus router set up with my vpn settings, so anything connecting to it automatically gets passed thru the vpn ip instead. Lower your ttl on desktop/laptop, do the build.prop entry, set ipv to 4 in settings, and set tether dun to 0 in settings.xml (I made a script for that). You should be to go with your vpn then.
Honestly I see almost no point in having unlimited tethering since your data is slowed down around 26gbs. I'm fine with the 7gb I have rn. If I were to make use of unlimited tethering, I'd need truly unlimited since I do very heavy usage on any of my computer's. Usually 700-900 GB a month(and that's only download. Upload is around 200gb a month). Used to have an at&t business hotspot that I paid $125/month and used 300 or so GB a month for three months with no slow downs on it.
xBØYxTØYx said:
Honestly I see almost no point in having unlimited tethering since your data is slowed down around 26gbs. I'm fine with the 7gb I have rn. If I were to make use of unlimited tethering, I'd need truly unlimited since I do very heavy usage on any of my computer's. Usually 700-900 GB a month(and that's only download. Upload is around 200gb a month). Used to have an at&t business hotspot that I paid $125/month and used 300 or so GB a month for three months with no slow downs on it.
Click to expand...
Click to collapse
Gotta pay to play. They "prioritize" your after 26, so it's not like it'll be slow 24/7. Annoying, sure. However, I haven't had home internet going on two years now. Worth it to me, based on my usage. With this tmo one stuff, they offer unlimited tethering, but of course, your primary usage has to be from your phone...
The victory was only half-way declared... They somehow know when device(s) that connect to my router are tethered. Router is setup with an openvpn configuration and connects to the vpn server automatically. All IPs check out, as well as ttl values, but they're still able to tell. One thing that was strange was if I did not enable vpn thru the router, but instead thru the client, the speeds remained constant - undetected. This is fine and dandy, but I'd lose my chromecast functionality this way... If things get rough and I can't finger this one out, I might hop onto to their unlimited everything for $95/month instead of the simple choice one I got now.
RussianBear said:
use the video from the op above..
Invest into a good vpn service.
Click to expand...
Click to collapse
If you have good home internet with VPN supported router, you can run VPN through your home
mingkee said:
If you have good home internet with VPN supported router, you can run VPN through your home
Click to expand...
Click to collapse
Yes, but somehow they can tell...even with a vpn setup thru a router.
RussianBear said:
Yes, but somehow they can tell...even with a vpn setup thru a router.
Click to expand...
Click to collapse
They can tell tho the t mobile app the one the shows your data you have to delete it and delete this the one that has the red # by it, that how they track you and can see everything on your phone and know it you have root or not and anything you do on your phone .