Related
Hi, I'm way in over my head here and sure could use some help!
I have Galaxy S2 SkyRocket i727, gingerbread 2.3.5 that I purchased off Ebay. Great phone unfortunitly my carrier dosen't sell or support this phone. They only carried a couple smart phone choices that really wasn't much of an option so I just took their free phone hoping I could just insert my Consumer Celluar Sim into the Galaxy. Everything works fine except, no 3G data connection. I have one of the "Connect" dataplans CC offers but am unable to set the correct APN setting on this phone.
The stock AT&T rom apn setting do not allow me to enter some of settings for CC like Proxy Push.
These are CC web apn configuration settings
Name: Web
Proxy Push: Enabled
Authentication Type: Secure
GPRS access point: att.mvno
Homepage: mmsc.cingular.com
I'm wondering if I root the phone and flash a custom rom would that allow me to enter the correct APN configuration settings? Is anyone aware of a custom rom out there that would do this or have any other solutions?
Leon
I think once you're rooted and flash a custom rom on, you'll be able to enter the APN's manually. I have the skyrocket and flashed DJ ICS Plus V2.0, wickid rom btw, and I'm using it on straight talk. It allowed me to put the APN's in manually while deleting the previous APN's already on the phone.
Thanks Pak, I'll give it a try and see what happens.
Custom Rom for Galaxy S2 SkyRocket
I flashed the new ROM DJ ICS Plus V2.0 but am still not seeing how I can change the APN setting to work with my carrier Consumer Cellular.
The carrier data setting need to be
Name: US - Consumer Cellular Web
APN: att.mvno
Proxy: Enabled
MMS Protocol: WAP 2.0
Authentication Type: PAP
APN Type: default, supl
In the S2 Access Point Setting there isn't a field to enter Protocol and no "supl" APN choice. Also if you don't include 310 in the MCC field and 410 in the MNC field you can't save the Access Point settings at all.
In regards to MMS Protocol, I'm assuming the rom has it already preloaded to WAP 2.0 or something since thats what I needed it to be anyways so I didnt have to enter anything. For APN type, I selected "internet" for my data and when I had another APN set up for my mms, I just selected "mms". In regards to MCC and MNC, you should be able to enter the 310 and 410. It shows up on mine.
Your right about WAP already being configured because email and other connections work. Messaging works too, just not data. I tried internet and internet & mms options for the APN Type but neither worked. I also tried inputing the server name of mmsc.cingular.com as suggested on their web site for non-Consumer Cellular phones but no luck with that either.
I had to leave 310 MCC and 410 MNC values in those fields because it would not save the Access Point if left blank or with any other values input.
the link below probably wont be much help but he had his proxy set up as proxy.mvno.ccmobileweb.com, maybe that will make a difference?
http://forum.xda-developers.com/showthread.php?t=904249
I had seen this site before also, tried it but no luck either. I must be missing something altogether here. You wouldn't think this would be such a difficult problem to solve.
dude I don't know, I know you probably did this but did you put "http://mmsc.cingular.com" instead of "mmsc.cingular.com"? I dont know if the http in front will do anything.
These guys below say you can only get data using EDGE, not while 3G is turned on (mind you its an iphone). Maybe turn off your 3G and see if it picks it up?
http://modmyi.com/forums/other-carriers-not-att-t-mobile/678452-data-consumer-cellular.html
Unlockit.co.nz was no help either?
http://www.unlockit.co.nz/mobilesettings/settings.php?id=179
Is your SIM card designed to handle 3G data connections? Not all SIMs are created equal, after all. Granted, you'd think that recently-made SIMs would support 3G, but you're not always going to be so lucky. I know this was a major issue once upon a time when 3G networks started to roll out more consistently and not everyone had a 3G-capable SIM.
In other words, has this SIM been able to talk to 3G networks before? Or is this the first phone you've put this SIM card in that has 3G?
If your SIM doesn't support 3G, ask your provider for a 3G-enabled replacement SIM.
Please Help.
I want to use an unlocked t-mobile branded lg g2x on the straight talk network
The APN settings supplied by the straight web site do not work for mms or internet,
If you have the APN settings that work for mms and internet please post them with confirmation that they work.
Thank you very much
Did you get any settings to work?
I want to pull the trigger on this, but not sure if it works (had some issues with the Simple Mobile APN settings on my phone).
Let me know.
Yes ! Please post these settings! I have had my g2x for about a month now with no sms/data at all! It is very frustrating I have tried many apns and cannot find one that works.. .
I got my g2x to work with straightalk last night but only phone and text. No data. Used my sim from my nokia e71. Type in att.mvno in the apn config screen. Trying to come up with the next step to get data.
Working settings for Lg G2x straighttalk
Name: whatever_you_want_the_name_to_be
APN: att.mvno
Username:
Password:
MMSC: http://mmsc.cingular.com
MMS Proxy: proxy.mvno.tracfone.com
MMS port: 80
MCC: 310
MNC: 410
EDIT: not sure what MCC and MNC stand for, or what the settings should be, but try leaving the 310, 410 settings in place, if it doesnt work, try leaving them blank.
Here are my settings:
Name
HOME
APN
att.mvno
Leave everything else alone EXCEPT the bottom selection that says:
APN type (here you must enter the following)
default,supl
Then save, next choose to add another APN
make it look like this:
Name
MMS
APN
att.mvno
skip down to
MMSC
http://mmsc.cingular.com
MMS proxy
proxy.mvno.tracfone.com
MMS port
80
skip to:
APN type (enter the following)
mms
THEN SAVE
You will see that only one APN has the option to be chosen, that is ok, Just choose the one that is able to be chosen.
Now go back to Homescreen and then reboot your phone.
This works for me, hope it can help you. I tried a hundred different ways and this was it. Capitalization is important, and the APN type was the trick.
GOOD LUCK and let me know if it worked for you.
them settings did not work for me. is there any other settings i can use?
working APN
If you are on stock rom then the normal straight talk settings work. Although you will have to download APN manager from the market to delete the T-Mobile apn or else your system will automatically switch to it occasionally which will drop data.
If you are on a custom rom (MIUI, ICS, etc.):
1. Open apn settings
2. Open the T-Mobile apn
DO NOT ERASE OR CHANGE ANYTHING OTHER THAN THE FOLLOWING
3. Change APN to wap.tracfone
4. Change Port to 8080
5. Change MMSC to http://mms.tracfone.com
6. Erase anything typed in the "APN type" field
7. Save
8. Delete any other APNs.
If you already deleted the T-Mobile apn on a custom rom you'll have to reinstall the rom or ask the developer what the apn settings were.
This has always worked for me. Hope it helps.
^^^^ That is the correct solution.
Thank you c1c2doc that worked perfectly!
The latest CM 7.2 has the StraightTalk APN information pre-populated as an option along with Simple. You can also get the T-Mobile SIM card from StraightTalk as well now so you don't have to unlock the phone. Has anyone tried these yet?
Sent from my SGH-T889 using xda app-developers app
This helped so much on my T-Mobile G1
c1c2doc YOU ARE A GENIUS!!!
How did you figure this out???
c1c2doc said:
If you are on stock rom then the normal straight talk settings work. Although you will have to download APN manager from the market to delete the T-Mobile apn or else your system will automatically switch to it occasionally which will drop data.
If you are on a custom rom (MIUI, ICS, etc.):
1. Open apn settings
2. Open the T-Mobile apn
DO NOT ERASE OR CHANGE ANYTHING OTHER THAN THE FOLLOWING
3. Change APN to wap.tracfone
4. Change Port to 8080
5. Change MMSC to
6. Erase anything typed in the "APN type" field
7. Save
8. Delete any other APNs.
If you already deleted the T-Mobile apn on a custom rom you'll have to reinstall the rom or ask the developer what the apn settings were.
This has always worked for me. Hope it helps.
Click to expand...
Click to collapse
I just got my Straighttalk T-mobile SIM up and running. I did not have to unlock my T-mobile GS2, plug-n-play. Took about a day to port my number over, entered the APN settings on the website. Getting data speeds the same as T-mobile, MMS worked the first time. So far, no complaints. I read on another forum that autopay eliminates fees and taxes. We will see.
The bearer field of an APN indicates if the APN is for LTE (14), eHRPD (13), or Unspecified.
One thing I have noticed is that APN Backup & Restore doesn't save/restore the "bearer" field. As a result all APNs produced by this app are of bear type "Unspecified". As far as I can tell an Unspecified bearer can be used for both LTE & eHRPD.
I'd like to know if there is any reason (i.e. improved performance) to specify the bearer type.
Also, would it be better to keep 2 APNs (one with bearer=LTE and one with bearer=eHRPD), or just have a single APN with bearer=Unspecified?
I am using cynogenmod 13 latest build all things working perfectly but I'm unable to change connection type to 3G or LTE if selected 2G I have to go to flight mode and then I can change the connection type to LTE only still can't change it to 3G. When it's selected LTE as default even that time also the data connection work still as 2G sign showing as E even if I select LTE never get the H/H sign on my service provider Vodafone India please help me... and sorry for my bad english.
I had a similar problem with CM 12.1, but I solved it changing the APN. My phone has 2 APN available, I just selected the one it wasn't using and I got 4G and 3G again after some minutes.
Hope it helps.
animeshrock said:
I am using cynogenmod 13 latest build all things working perfectly but I'm unable to change connection type to 3G or LTE if selected 2G I have to go to flight mode and then I can change the connection type to LTE only still can't change it to 3G. When it's selected LTE as default even that time also the data connection work still as 2G sign showing as E even if I select LTE never get the H/H sign on my service provider Vodafone India please help me... and sorry for my bad english.
Click to expand...
Click to collapse
Try changing the APN as Secuential said. For Vodafone India, I think it says 'www'.
If that doesn't work, try manually changing it.
Enter *#*#4636#*#* in your dialer.
In the 'Testing' window that appears, go to Phone Information.
Scroll down to Set preferred network type: (The default is LTE/GSM auto (PRL))
Change it to WCDMA only.
It should show H sign after a while.
Good luck.
(Though, keeping WCDMA only can increase battery usage. Change it to 'WCDMA preferred' later)
I'm on android 11 beta 4 and really can't figure out how to change the APN protocol from ipv6 to ipv4. I wanted to do this to try to get a stupid preamp/streamer to work but their app for setting up the preamp seems to only work with ipv4, only I don't know how to change this on this version of android. Thanks if you know - or even if you don't ;-)
Go to settings>Wifi&network>Sim & network settings> select your active data sim> access point names> Click in your apn (name, not the check box) go to apn protocol(bottom) and select ipv4
Save changes and done