1. Flash the .tar with Odin
2. Wipe Dalvik cache
3. Reboot your device or flash another custom rom
If it is stuck in "Starting apps." after the apps optimization, try to clear the Dalvik cache again and then rebooting again, and then just wait until it's finished.
Worked for me. Well, I made it xD
If you have questions, you can DM me.
Download:
drive.google.com/file/d/1LyZaiHYj46SOe_8CjrOfhWJdvSCnZLnM/view?usp=sharing
The Odin Flashing doesn't work for me
Please, do ordered stuff. Post ROM in development (not original) section. General isn't development.
Related
Hi all. The problem is this, I cyan9 through mobileodin to stock 4.0.4. after that I can not flash with odin 1.85 cwm or root, or other rom. Firmware stack after checking the hash file of rom. Stock recovery can not do anything too flash - freeze. How can I restore it?
I try flash stock 404 with pit, try install cwm from stock recovery and rooting, try diferent stock roms russian,indian,australia. - nothing.....
Have idea... Install cwm from recovery stock and flash cyan9 or 10.... But it's bad idea...
p.s. I'm from Ukraine, and somewhat easy in forum lot of information to read quickly, and a lot of bugs Thanks
Are you able to install CWM Recovery? if so then try these steps:
1) reboot to CWM
2) wipe data/factory reset in CWM
3) wipe cache
4) advanced > wipe dalvik, wipe battery stats
5) install .zip from INTERNAL SD
6) reboot
That was the problem that stock recovery remained. Firmware sink crooked rose. And One refused to flash (rom or recovery - PC freeze ). I have been through Heimdall(recovery iso) flash CWM recovery - and then by your advice. If it was all easy initially - the post would not create. Thank you.
can anybody tell me how to flash remics rom from starting?
Custom ROM installation
karanmirchandani96 said:
can anybody tell me how to flash remics rom from starting?
Click to expand...
Click to collapse
Check on the steps mentioned by Chinmay in the development section - they are pretty straight forward, else just google up!
http://forum.xda-developers.com/showthread.php?t=1844062
-First you need to root your cell by flashing cf-root for your firmware
http://forum.xda-developers.com/showthread.php?t=1331253
-then download the latest RemICS ROM and put in the roots of memory card
-put your phone in recovery mode by pressing the "volume down + HOME + power"
-once cell goes in recovery mode Do a factory reset/data wipe
-then select “install zip from sd card” > “choose zip from sd card” and then choose RemICS ROM
-after flashing this rom "wipe cache,wipe dalvik cache (by going in advance)" from recovery
-then select reboot system now
I see you are a newbie, i'll help you.
You first need to flash XXKPE, from XXKPE you need to flash DDLF2, and when DDLF2 is flashed, you need to flash CF-ROOT for DDLF2.
Let the phone boot and go to CWM icon, press it and wait till it loads, press Reboot to CWM recovery (something like that) and when it is rebooted wipe data factory reset, wipe cache, wipe dalvik cache and install the Remics Rom and reboot and thats it.
If u want to flash ADDONS just reboot recovery and flash ADDONS no need to wipe anything.
Good luck.
where is external sd card folder in remics rom?
Ditbardh said:
I see you are a newbie, i'll help you.
You first need to flash XXKPE, from XXKPE you need to flash DDLF2, and when DDLF2 is flashed, you need to flash CF-ROOT for DDLF2.
Let the phone boot and go to CWM icon, press it and wait till it loads, press Reboot to CWM recovery (something like that) and when it is rebooted wipe data factory reset, wipe cache, wipe dalvik cache and install the Remics Rom and reboot and thats it.
If u want to flash ADDONS just reboot recovery and flash ADDONS no need to wipe anything.
Good luck.
Click to expand...
Click to collapse
I've seen and tried to follow the steps in your post in the dev forums, but I lack the XXKPE step! Lol. I have RemICS 1.7 now on DXKP7, but I'm experiencing problems with battery drain, so I want to switch to DDLF2. I'll just outline the steps that you have already mentioned so I can be sure:
1. Flash XXKPE, download from here (post by kkrraazzyy).
2. Flash DDLF2 (don't know how to,but you can download from the same link in step 1)
3. Flash CF-ROOT ([please insert forum link here for download and instructions])
4. Let the phone boot
5. Reboot to recovery
6. Perform factory reset
7. Wipe cache and Dalvic cache
8. Install RemICS ROM
Sorry, noob here. Many thanks!
display
my display is draining 44% battery please suggest me some display settings
To all noobs above, all your questions are already answered millions of times, do a simple search and you will find the answers.
Hello, This may seem like a nooby question but i'd just like to ask how would i flash this? http://forum.xda-developers.com/xperia-j-e/development/rom-evolution-t2824883 The developer provided no steps, How would i flash this Do i need to revert to anything or any of that
Here's How..
If you're running on a custom ROM, (do a backup first) it is highly recommended to flash the ICS firmware (11.0.A.7.5), since you stand the risk of losing baseband.
After that, follow the general steps to install a rom:
1> Place .zip file on SD card
2> Flash a recovery through FastBoot mode
3> Do a Wipe Data/Factory Reset, followed by wiping Cache and then Advanced--> Wipe Dalvik Cache
4> Install the .zip file
5> Do the Factory Reset & Wiping Caches again, if you wish
6> Reboot.
Good day!
Please hit Thanks if it helped!
help me guys i have note 2 n7100 (4.4.2) i install cm 12 with cwm and they are installed after installation and clicking reboot system my phone still on phone name screen and did not boot i try to install offecial rom with odin but it failed and i try 4 part rom (4.3 - 4.1) but they block block on get pit for maping.
pleas help me.
khaieri said:
help me guys i have note 2 n7100 (4.4.2) i install cm 12 with cwm and they are installed after installation and clicking reboot system my phone still on phone name screen and did not boot i try to install offecial rom with odin but it failed and i try 4 part rom (4.3 - 4.1) but they block block on get pit for maping.
pleas help me.
Click to expand...
Click to collapse
Download your 4.4.2 firmware here
Make sure you have a good cable and the latest odin.
Do not panic. Is your phone able to boot into recovery? If so then there is hope.. Let me know and I might be able to help you out.
If you're in bootloop after cm12.. Try clearing the 'cache' and 'Dalvik cache' from recovery and try rebooting. .
dev_0905 said:
Do not panic. Is your phone able to boot into recovery? If so then there is hope.. Let me know and I might be able to help you out.
Click to expand...
Click to collapse
Yes my phone able to boot into recovery I have TWRP Recovery I installe DN4 2.1 and they installed but after pressing reboot the same problem happen again
Do a clean reinstall with steps mentioned below..
In recovery.. 1.go to wipe and do factory reset.2.go wipe>advanced>and wipe data, system, cache and Dalvik cache. 3.go to install and flash rom. 4.after success choose wipe cache/Dalvik . Now reboot . this should work.
dev_0905 said:
Do a clean reinstall with steps mentioned below..
In recovery.. 1.go to wipe and do factory reset.2.go wipe>advanced>and wipe data, system, cache and Dalvik cache. 3.go to install and flash rom. 4.after success choose wipe cache/Dalvik . Now reboot . this should work.
Click to expand...
Click to collapse
I wipe data .cash but nothing happened
In twrp recovery they show me a words with red color like that :
E:/sbin/runatboot. sh process ended with ERROR=1
Can you tell me what mean that.
dev_0905 said:
Do a clean reinstall with steps mentioned below..
In recovery.. 1.go to wipe and do factory reset.2.go wipe>advanced>and wipe data, system, cache and Dalvik cache. 3.go to install and flash rom. 4.after success choose wipe cache/Dalvik . Now reboot . this should work.
Click to expand...
Click to collapse
I wipe data .cash but nothing happened
In twrp recovery they show me a words with red color like that :
E:/sbin/runatboot. sh process ended with ERROR=1
Nothing happened same error
Try downgrading ur twrp to 2.8.6.0 and repeat clean install..
---------- Post added at 12:13 PM ---------- Previous post was at 12:05 PM ----------
Also try eclipse Rom because development for dn4 has stopped.. Its a all in single rom file.. Flashing it should be easy
Hi,
I want to ask about my phone j700h i dont know if dead or what.
first my phone firmware is Marshamallow then i downloaded A5 Port rom and install and success and then i saw "Speed Fusion Remix " i think its cool so i downloaded and create backup using TWRP and install "Speed Fusion Remix " and Success and when i use the "Speed Fusion Remix " i tried gps test apps in My Room and i saw slow locking location then a few hours i tried to go back to A5 Port Rom using Restore TWRP and success boot. and i tried to GPS test in my Room but also slow and i tried outside my house and then there is a bunch of GPS satellite so i think "Speed Fusion Remix ROM" have no problems. Once Again i tried to Flash "Speed Fusion Remix ROM" and after installation my phone went BLACK it won't charge, I can't go to Recovery mode but i can go to Download Mode. So i downloaded he Official Firmware J7 then Flash Using ODIN software and Success flash, but it won't BOOT and Black Screen also. I cant Go to Recovery, Only DownloadMode is Function.
WHY? Can you Help Me?
Did you do a full wipe - data, system, cache, dalvik cache - before flashing with Odin?
Odin defaults to 'upgrade' while preserving data.
If you didn't wipe before the Odin flash you now have a 'mix' of roms on your fon.
Edit
First try to reinstall TWRP using Odin.
If that fails proceed as below.
Since you can't go into recovery to wipe anymore, retry Odin but select Re-Partition under options.
If that fails use SmartSwitch emergency recovery.
You're such a flash whore! . Like me :silly:
Good Luck!
dodo2244 said:
Did you do a full wipe - data, system, cache, dalvik cache - before flashing with Odin?
Odin defaults to 'upgrade' while preserving data.
If you didn't wipe before the Odin flash you now have a 'mix' of roms on your fon.
Edit
First try to reinstall TWRP using Odin.
If that fails proceed as below.
Since you can't go into recovery to wipe anymore, retry Odin but select Re-Partition under options.
If that fails use SmartSwitch emergency recovery.
You're such a flash whore! . Like me :silly:
Good Luck!
Click to expand...
Click to collapse
first of all thank you very very much my friend you save my phone. I use the SmartSwitch emergency recovery and it works like a boss. I'm Happy Now and i wan to install again the custom rom LOL
Glad to have been of help :good:
Remember stay protected as you go around flashing random roms like a maniac :angel: