Related
Today I get Galaxy Tab 8.9 Book Cover. Very nice and solid material (high quality plastic). Looks good and expensive. Little heavy... In it tab is stable and does not fall out.
More pictures....
...I don't see volume button cut-outs.
Dont have..... Must be open to get volume controls.
I have the same case, it's really good quality (but rather expensive too). Mine does have the volume buttons cut-out though, odd.
I also have the same case (dark version) and I don't have cut outs for volume OR power
Whoops I was mistaken, I don't have access to the volume rocker when the case is closed. Never had to use them that way anyway so it's not an issue to me.
I was going to start a thread reviewing this case but someone beat me to it! The photos do a good job, so I won't post my own unless someone wants them. I'll give a review of it though in this thread.
The quality of this case is top notch. The back of the case, where the galaxy tab 8.9 clips in is a thicker type plastic which offers rigid protection. The flap which covers the screen is a thinner material which I can't place. An extension of the front cover creates a flap, that when closed, uses a magnet to snap in place. The clips which the tablet snaps into come right around the edge to be flush with the plane of the screen. There is a cut out for the power button and headphones, but none for the volume rocker. The left and right edges of the tablet in landscape mode are slightly exposed. The case doesn't add a lot of bulk or weight, offering the minimum material necessary for protection. Maybe not noticed in the photos are two features which help this case out. One is the rubber grips on the bottom to help the case stand the tablet up. The other is a thin strip cutout on the back which allows the end of the flap to support the tablet at about 15 degrees, which makes for the perfect angle for viewing and typing while laying on a desk.
The only problem I can find with the tablet is that when the case is open, the rear facing camera is blocked by the flap. I noticed this complaint in a few reviews on the GT10.1 case and the solution is to rotate the tablet 180 degrees where the cover is dangling down and the camera is at the bottom of the tablet. Problem solved.
My overall impression of the tablet is great. I'm very happy with the case. It's a little pricey, but sometimes you have to pay for quality. The ivory color is sharp; a good change from the sea of black cases out there. All in all I would buy it again. In fact I might be doing just that if my wife wants to trade in her 10.1 GT for the 8.9 because she's jealous of my tablet AND case.
EDIT: To add some high quality photos, since I had them.
Just received my case (in black) and loving. I am trying to work out a way to toggle the screen on and off when the case is opened, perhaps using Tasker and the light sensor. However, the Power On option isn't available in Tasker. Anyone have an idea how to make this work?
whiplasher said:
Today I get Galaxy Tab 8.9 Book Cover. Very nice and solid material (high quality plastic). Looks good and expensive. Little heavy... In it tab is stable and does not fall out.
Click to expand...
Click to collapse
Is it the official samsung case ? it looks like the official one on the 10.1.
If so, can you give me its reference number
Official samsung case, yes
EFC-1C9NIECSTD for white version
That looks really nice. It would be perfect for my wife, if she gets an 8.9 Tab.
I have the black version and love it to death. I thought the price was too high before buying it.
I was hoping for somewhere around the $50 range. But, oh well, it was very well thought out and the quality is excellent.
At the end of the day I'm super happy with it and would highly recommend it to anyone.
kjgear said:
That looks really nice. It would be perfect for my wife, if she gets an 8.9 Tab.
I have the black version and love it to death. I thought the price was too high before buying it.
I was hoping for somewhere around the $50 range. But, oh well, it was very well thought out and the quality is excellent.
At the end of the day I'm super happy with it and would highly recommend it to anyone.
Click to expand...
Click to collapse
I got mine new, in-box from a seller on eBay for $50. I recommend you give them a look: ccmaccessories.
My black (ORIGINAL from samsung). Price 55eu ..
I can post links
h t tp://imageshack.us/photo/my-images/710/20120131202248.jpg/
h t tp://imageshack.us/photo/my-images/836/20120131202350.jpg/
This is an official Samsung case and it`s very comfortable & solid thing.
I think - must have)))
I found a seller on ebay that sells it for just $40
http://cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&item=170790359146#ht_1623wt_1130
Nice looking case!
I can't really tell from the pictures, but I'm pretty sure there is no access to the dock connector when the tablet is in a stand position, right?
So having a USB flash drive connected for the purpose of watching movies is out of the question, right?
Edit: nevermind.. dumb question I think I'm gonna go with the keyboard dock or something..
just got mine in black. I rock all my cell phones "naked" so I dont have much experience in casing, but I couldnt be happier. quality stuff.
Nice, but when you close cover, you can hear music because it cover two speaker too
Just got my Mate 7 from Amazon and am test driving it. Very impressed with the packaging, the screen is beautiful, and I've already fallen in love with the fingerprint scanner. And Swype, my favorite keyboard, is loaded by default.
But...
I'm finding it uncomfortable to hold with one hand. I don't have small hands, and they're not oven mitts either. Just average. I've had other large phones (Find 7a, 1+1, Lumia 1520), so it's not the size. It's the edges, I guess. I suppose a case would help, but that would just make the phone seem even larger.
I have a 30 day return window to see if I can live with it, but was just wondering if anyone else had this initial impression and got used to it somehow.
those type of smartphone aren't easy to use with only one hand. keep in mind to use it with tow hand it's mutch more confortable. in fact for my side i use it with the huawei folio case and i hold it with my left hand like a open book and i touch the screen with the other hand.
That's how I do it also, with two hands. But after a bit, the edges really become noticeable, given that sides are flat. Does the folio case add a lot of size & weight?
I ordered ultra thin transparent silicon case for Mate 7, it is just milimeter thick, and cost about 2$. Now it is much more comfortable to use the phone, you have much beter grip to use it with one hand, and the size of the phone is almost the same.
Took one week for me to get used to the size.
bruce7373 said:
That's how I do it also, with two hands. But after a bit, the edges really become noticeable, given that sides are flat. Does the folio case add a lot of size & weight?
Click to expand...
Click to collapse
the huawei official folio case is very good and it's very good quality. it don't add to mutch size & weight. it also give a very good protection of the "precious"
other fonction of the official folio is the "intelligent windows" of the cover who automaticaly adapte the display throught the windows. and you can use the touch fonction throught it too.
the cover also have a magnetic close fonction , so it can't open if you drop "the baby"
I think there used to be a thread on this, but I can't find it anymore. Here's my question:
I'm looking for a thin leather case for my S6. Not so much a wallet style case, sleeve, or one with a closure, just a protector for the back and sides of the device. My experience with PU or low-grade leather (<$20) isn't great, so I'm fine spending a little more money (>$50).
Ideally, it would be brown and available in the US. The options I've seen so far don't fit in with the color, price, or domestic availability. Any suggestions? If you're going to suggest these, I've already looked at them and they are a bust:
I'm an XDA noob, so I'm prevented from posting links, but I've looked at cases from Stilgut (can't order from Amazon US and potential returns to DE seem difficult), Sena (no back-only case for the S6), Vaja (not making a case for the S6), and Montblanc (if I'm gonna spend $110, I need one that is perfect, i.e., brown). None fit the bill.
Again, apologies if this is a duplicate thread. Any help/suggestions would be greatly appreciated.
Thanks!
P.S. As an aside, I'd consider a wooden case, but none of those (Carved, Toast, etc.) seem to be what I'm looking for either.
I'm interested in this as well.
The official Apple leather case for the iPhone is perfection for what I want. Unfortunately, that's one area that Samsung doesn't seem willing to take design queues from. I wouldn't mind paying 40/50 bucks if its THE only case id want/need.
lucas.scott said:
I'm interested in this as well.
The official Apple leather case for the iPhone is perfection for what I want. Unfortunately, that's one area that Samsung doesn't seem willing to take design queues from. I wouldn't mind paying 40/50 bucks if its THE only case id want/need.
Click to expand...
Click to collapse
Currently choosing between Galaxy S6 and iPhone 6. As silly as it might sound, a good leather (shell) case is one of my highest priorities.
I broke 3 iPhone 5's until I put the official leather case on it (I always disliked plasticky cases).
It added more grip, and just enough protection from average falls.
Ridiculous really. Choosing a $1000 piece of tech based on a $50 accessory. But that's just how it is.
Hopefully someone knows of something.
They haven't announced the S6 case yet but I have always been happy with with Vajacases - if you are willing to drop some extra cash. Here's one of the options for the S5: http://www.vajacases.com/galaxy-s5-leather-cases/premium-leather-grip
Edit: I see you mentioned Vaja is not making an S6 case. What is your source? It usually takes them a few months before the new models are ready.
There actually was a thread on this subject until recently, but when trying to find it now, I just realized it has inexplicably been deleted. Had a few good examples in it, but they're obviously not reachable now. I'll post the link here below in case the thread turns up again.
http://forum.xda-developers.com/galaxy-s6/accessories/simple-leather-wallet-case-t3095597/
sankyou said:
They haven't announced the S6 case yet but I have always been happy with with Vajacases - if you are willing to drop some extra cash. Here's one of the options for the S5: {link removed because I'm new and can't have links in any of my posts}
Edit: I see you mentioned Vaja is not making an S6 case. What is your source? It usually takes them a few months before the new models are ready.
Click to expand...
Click to collapse
I contacted Vaja through their website back in April and they told me that it was under development. When I checked in last week, they said that a case for the S6 "is not currently being planned for production. We planned to develop a line in the past but I am afraid right now the project has been cancelled."
Whether that means it may show up later, who knows, but for now we're out of luck. Boo.
Yeah, no clue either why the other thread disappeared. It led me to a couple of versions of Apple-esque leather Galaxy S6 cases on eBay.
This one without a plastic fill in the camera/HRM cutout is the one that I already bought in dark blue for my black S6. In short:
Top and bottom are left uncovered
Fit is pretty good, no looseness anywhere really
The power + volume down buttons are both properly clicky
The volume up is pretty mushy, but not too bad
No interference with headphone jack or bottom USB port
The width of the case means that the camera module no longer touches the surface when laid on its back
It does NOT, however, appear to have any lift on the front so your screen will touch the surface when laid facedown
The last item was probably so that swiping in from the edge of the screen is still quite comfortable
Overall I'm pleased enough with the quality and feel of the PU leather cases that I might end up also trying out this slightly different version with plastic fill for the camera/HRM cutout . I'm not sure if it's unclear photos but it looks like this version has full coverage around at least the top of the bottom?
Anyhow, the one that I have feels a lot like the Apple Leather case I've tried out on iPhone 6, which is exactly what I was looking for.
sosquidtaste said:
Yeah, no clue either why the other thread disappeared. It led me to a couple of versions of Apple-esque leather Galaxy S6 cases on eBay.
This one without a plastic fill in the camera/HRM cutout is the one that I already bought in dark blue for my black S6. In short:
Top and bottom are left uncovered
Fit is pretty good, no looseness anywhere really
The power + volume down buttons are both properly clicky
The volume up is pretty mushy, but not too bad
No interference with headphone jack or bottom USB port
The width of the case means that the camera module no longer touches the surface when laid on its back
It does NOT, however, appear to have any lift on the front so your screen will touch the surface when laid facedown
The last item was probably so that swiping in from the edge of the screen is still quite comfortable
Overall I'm pleased enough with the quality and feel of the PU leather cases that I might end up also trying out this slightly different version with plastic fill for the camera/HRM cutout . I'm not sure if it's unclear photos but it looks like this version has full coverage around at least the top of the bottom?
Anyhow, the one that I have feels a lot like the Apple Leather case I've tried out on iPhone 6, which is exactly what I was looking for.
Click to expand...
Click to collapse
Wow, thank you so much. The "more expensive one" is exactly what I am looking for. No cutouts on the side or anything. Looks perfect. Out of curiosity, how long did shipping take? I have the worst luck with that kind of thing, and it looks like it ships out of China.
Also, since you have the dark blue/black S6, can you throw up a few images for me?
I just ordered one of each... hopefully they arrive before S7....
Looks like one of these would work. Thanks for the tip.
lucas.scott said:
Wow, thank you so much. The "more expensive one" is exactly what I am looking for. No cutouts on the side or anything. Looks perfect. Out of curiosity, how long did shipping take? I have the worst luck with that kind of thing, and it looks like it ships out of China.
Also, since you have the dark blue/black S6, can you throw up a few images for me?
I just ordered one of each... hopefully they arrive before S7....
Click to expand...
Click to collapse
Yeah, the buttons on the second cases I linked in my post look like they'll have better buttons. On mine it's like... slits on each end of the button section.
Shipping was surprisingly fast for me. I think I wanted like... just under two weeks? I was quoted a shipment time like 30+ days from purchase (which is insane), so I was pleasantly surprised when it showed up in normal China --> US shipment time.
If I can get a few minutes to myself at home tonight I'll try and snap a few choice pics of the dark blue on my black S6.
Though it's not without its tradeoffs, I think you'll be more than pleased with your order
sosquidtaste said:
Yeah, the buttons on the second cases I linked in my post look like they'll have better buttons. On mine it's like... slits on each end of the button section.
Shipping was surprisingly fast for me. I think I wanted like... just under two weeks? I was quoted a shipment time like 30+ days from purchase (which is insane), so I was pleasantly surprised when it showed up in normal China --> US shipment time.
If I can get a few minutes to myself at home tonight I'll try and snap a few choice pics of the dark blue on my black S6.
Though it's not without its tradeoffs, I think you'll be more than pleased with your order
Click to expand...
Click to collapse
Awesome man - thanks for the info!
Much appreciated on the pics!
ronnotronald said:
I think there used to be a thread on this, but I can't find it anymore. Here's my question:
I'm looking for a thin leather case for my S6. Not so much a wallet style case, sleeve, or one with a closure, just a protector for the back and sides of the device. My experience with PU or low-grade leather (<$20) isn't great, so I'm fine spending a little more money (>$50).
Ideally, it would be brown and available in the US. The options I've seen so far don't fit in with the color, price, or domestic availability. Any suggestions? If you're going to suggest these, I've already looked at them and they are a bust:
I'm an XDA noob, so I'm prevented from posting links, but I've looked at cases from Stilgut (can't order from Amazon US and potential returns to DE seem difficult), Sena (no back-only case for the S6), Vaja (not making a case for the S6), and Montblanc (if I'm gonna spend $110, I need one that is perfect, i.e., brown). None fit the bill.
Again, apologies if this is a duplicate thread. Any help/suggestions would be greatly appreciated.
Thanks!
P.S. As an aside, I'd consider a wooden case, but none of those (Carved, Toast, etc.) seem to be what I'm looking for either.
Click to expand...
Click to collapse
lucas.scott said:
I'm interested in this as well.
The official Apple leather case for the iPhone is perfection for what I want. Unfortunately, that's one area that Samsung doesn't seem willing to take design queues from. I wouldn't mind paying 40/50 bucks if its THE only case id want/need.
Click to expand...
Click to collapse
I found a high end solution for you guys as well. Reviews on Bouletta from the Sony forums talk about them being some of the highest quality leather cases on the market.
BLACK: http://www.bouletta.com/index.php?i...xy_s6_ultimate_jacket_other_models-uj_rbt1_s6
BROWN: http://www.bouletta.com/index.php?i...xy_s6_ultimate_jacket_other_models-uj_rbt5_s6
Looks nice, but having the cut outs on the side just make it feel cheap to me...Even if it's of the highest quality
lucas.scott said:
Looks nice, but having the cut outs on the side just make it feel cheap to me...Even if it's of the highest quality
Click to expand...
Click to collapse
I know exactly what you mean. Originally I wanted an Xperia Z3, but there are literally no cases available without massive side cut-outs. The Z3 one is borderline ridiculous: http://www.bouletta.com/index.php?id_product=103&controller=product
The Galaxy S6 one isn't too bad. Not as good as the standard Apple one though unfortunately =\
I have the second case linked from ebay earlier. It is nowhere near leather feeling. I would say it feels more like a smoothed out velvet than anything. Also, the case does not really offer any protection for the front. It might stick out 1mm past the screen. Overall it is an okay case for the price, but if anyone wants a "leather" feel to a case, this is not the one for you. The buttons are not that great either. You lose most of the tactility from the keys with the case. I imagine over time they will break in and feel better, but after a week of use it doesn't feel great, but doesn't feel as bad as it did at first.
chinesefood said:
I found a high end solution for you guys as well. Reviews on Bouletta from the Sony forums talk about them being some of the highest quality leather cases on the market.
BLACK: no links for me
BROWN: no links for me
Click to expand...
Click to collapse
Am I missing something? I can't seem to find a price/how to buy? Is it a non-US site?. Also, the brown case looks grayish, no? (I'm legit color blind though, so that could just be my broken eyes)
Hey that bouletta case looks really nice. However, is the thickness of the back of the case enough so that the camera doesn't touch the surface the phone is placed on? I've seen many posts of people saying how they cracked the camera lenses after just putting the s6 on its back like on a table or something similar.
Thanks
ronnotronald said:
Am I missing something? I can't seem to find a price/how to buy? Is it a non-US site?. Also, the brown case looks grayish, no? (I'm legit color blind though, so that could just be my broken eyes)
Click to expand...
Click to collapse
You're right. I've sent them an email to find out.
ARRIVED!!
This one came in today : http://www.ebay.com/itm/Luxury-Orig...Domain_0&var=570673785727&hash=item3f4af29e66
Gotta say... i'm insanely impressed. I can't imagine getting much closer to the official Apple Leather case than this. Sure, there is virtually no drop protection, but that's not what I'm into. Just need to keep it scratch free and get that camera bump evened out. I have attached some pics.
Biggest problem for most people will be lack of lip around the screen. It's pretty much flush with the aluminum on the device. I actually prefer that since I never ever place my device face down... so i'm able to still feel the slight curve to the glass.
The buttons are a little stiff right now - but I'm going to chalk that up to material. It'd be awesome if they wear in over time, but not a big deal if they don't. I'm thrilled with this thing for 8 bucks... could easily sell for 30 in US retail stores.
I also got the 5 dollar version and it's not nearly as nice. That two dollars makes all the difference in the world apparently.
lucas.scott said:
This one came in today : http://www.ebay.com/itm/Luxury-Orig...Domain_0&var=570673785727&hash=item3f4af29e66
Gotta say... i'm insanely impressed. I can't imagine getting much closer to the official Apple Leather case than this. Sure, there is virtually no drop protection, but that's not what I'm into. Just need to keep it scratch free and get that camera bump evened out. I have attached some pics.
Biggest problem for most people will be lack of lip around the screen. It's pretty much flush with the aluminum on the device. I actually prefer that since I never ever place my device face down... so i'm able to still feel the slight curve to the glass.
The buttons are a little stiff right now - but I'm going to chalk that up to material. It'd be awesome if they wear in over time, but not a big deal if they don't. I'm thrilled with this thing for 8 bucks... could easily sell for 30 in US retail stores.
I also got the 5 dollar version and it's not nearly as nice. That two dollars makes all the difference in the world apparently.
Click to expand...
Click to collapse
Thanks for the pictures. It looks to be a little off around the bottom of the phone. Is it just the angle of the picture or is that the case?
I had purchased something like this for an iPhone 6 plus that I had and it just slightly didn't fit the phone. The cut out for the camera was off were it wouldn't sit flush with the back of the phone. I ended up just biting the bullet and paying the 50 odd bucks for the apple one. It would be nice if there was a decent quality real leather option, even if the price was higher. I guess we'll just have to wait and see. Again thanks for the picture.
Describe here your case with Pics and videos. Pros e Cons.
Doubts about cases? Let's discuss together! Thanks everybody! :good:
Recently I bought those 3:
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.com/ulk/itm/132581076421
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.com/ulk/itm/183176796723
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.com/ulk/itm/372276989136
When I received I'll update here. ?
Edit 01 ( 11/may/18)
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.com/ulk/itm/132581076421
- The best out of those - Nilkin did a great jobe and follow the the back curves. Precision cuts. You need to hold nicely because its not so rubbery. Note 9
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.com/ulk/itm/183176796723
- Good case with a nice style. precisely cuts, follow the back curves. Note 7
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.com/ulk/itm/372276989136
- Horrible - It has protection because its almost like covering your cellphone with a tire. Note 2
Have one of these. Seems like it would take the blow should the phone fall screen first on a completely flat surface. The corners are somewhat hollow which makes them a bit softer than the rest of the case. I guess it's around 1.3mm thick and sticks out 0.65mm above the screen. It seems to provide some extra grip but is not really comfortable to hold. It's cheap atleast.
Dinizbr said:
Describe here your case with Pics and videos. Pros e Cons.
Doubts about cases? Let's discuss together! Thanks everybody! :good:
Click to expand...
Click to collapse
I purchased the Roxfit Precision Slim Soft Touch Shell. If you like something slim that will provide some minor protection to the back and corners this is a great case. Everything lines up and it doesnt hinder any usage of the fingerprint scanner at all. Its pretty thin so like i said this will probably only prevent minor damage.
mattnathaniel12 said:
I purchased the Roxfit Precision Slim Soft Touch Shell. If you like something slim that will provide some minor protection to the back and corners this is a great case. Everything lines up and it doesnt hinder any usage of the fingerprint scanner at all. Its pretty thin so like i said this will probably only prevent minor damage.
Click to expand...
Click to collapse
that case seems very nice, and I like it doesn't cover all the buttons!
the clear and anti-scratch one seems even slimmer though? Maybe I could try that one..
and did you maybe get also the curved screen protector?
https://www.roxfit.mobi/collections...ed-clear-tempered-glass?variant=2219880841228
cause I'm curious to know if they would perfectly fit together, or maybe they will conflict on the edges?
FcukBloat said:
that case seems very nice, and I like it doesn't cover all the buttons!
the clear and anti-scratch one seems even slimmer though? Maybe I could try that one..
and did you maybe get also the curved screen protector?
https://www.roxfit.mobi/collections...ed-clear-tempered-glass?variant=2219880841228
cause I'm curious to know if they would perfectly fit together, or maybe they will conflict on the edges?
Click to expand...
Click to collapse
I did purchase those screen protectors as well. The problem with these is they do not sit perfectly on the edge of the curved part of the screen. Your left with a slightly raised edge that is going to accumulate grime and debris around the border of the screen protector. However it does fit with the slim case and the 2 do not conflict with each other in any way. That being said if your have noticed the screen sensitivity issue at all then your are REALLY going to notice it with this on. I find myself having to hit the same button 2 or more times especially if the part of the screen I am tapping is closer to the edge of the screen. I would only recommend getting this right now if your in desperate need of the protection it may offer. If not then I may hold off until Sony fixes whatever issue is going on with their screen sensitivity.
mattnathaniel12 said:
I did purchase those screen protectors as well. The problem with these is they do not sit perfectly on the edge of the curved part of the screen. Your left with a slightly raised edge that is going to accumulate grime and debris around the border of the screen protector. However it does fit with the slim case and the 2 do not conflict with each other in any way. That being said if your have noticed the screen sensitivity issue at all then your are REALLY going to notice it with this on. I find myself having to hit the same button 2 or more times especially if the part of the screen I am tapping is closer to the edge of the screen. I would only recommend getting this right now if your in desperate need of the protection it may offer. If not then I may hold off until Sony fixes whatever issue is going on with their screen sensitivity.
Click to expand...
Click to collapse
hi thanks for the answer. I already have glass protector applied, I got the version smaller than the front panel so it covers only the real screen actually, still it has the same problem on the sides coming a little apart and accumulating dust, so I wondered if the curved one would have been better. if it is not I'll stay with the one I have now, thank you!
about the sensitivity problem, I didn't try without the protector, as I applied it as soon as I received the phone, I can fill it sometimes especially when scrolling items, I have to put more pressure than usual, but it is not a so big problem for me atm.
Just ordered these 2 cases and set of screen protectors. Will update when they arrive.
I ordered the two manufactured by Nillkin (the hard plastic, and the flexible ones), I will report back when I get them.
I already have the one that imitates leather, and has a V letter on the back. It's pretty bad in my opinion, make the phone less comfortable, the fit is not great, and it doesn't add any protection to the screen (minimally raised borders). Wouldn't recommend it unless you want to go for the absolutely cheapest.
CaraMuuu said:
I ordered the two manufactured by Nillkin (the hard plastic, and the flexible ones), I will report back when I get them.
I already have the one that imitates leather, and has a V letter on the back. It's pretty bad in my opinion, make the phone less comfortable, the fit is not great, and it doesn't add any protection to the screen (minimally raised borders). Wouldn't recommend it unless you want to go for the absolutely cheapest.
Click to expand...
Click to collapse
didn't you return your xz2c because of the screen sensitivity problem? just curious
I did return it, but my device had also a dead pixel. So after I saw the same screen sensitivity issue in the Huawei p20 and p20 pro I started believing that this is an Oreo issue as was explained in some other thread... And I ordered another xz2c
So if Sony doesn't resolve the touch screen issue themselves, probably it will be solved by Google in the next major Android update.
It bugs me, but I can live with it, and I want to believe it will be resolved. Basically I don't see any other phone that will fulfill me in battery life + 2018 SoC + not huge size. My only alternative would be a S9 with lineage OS, but buying an expensive phone with the intention of voiding warranty on day 1 is not a good approach I think.
Probably the Xiaomi mi7 would be a good alternative, but we're months away from its release.
No phone is perfect, so I prefer something that fits my pocket and I don't have to charge in the middle of the day, even if it means a poor gaming experience.
CaraMuuu said:
I did return it, but my device had also a dead pixel. So after I saw the same screen sensitivity issue in the Huawei p20 and p20 pro I started believing that this is an Oreo issue as was explained in some other thread... And I ordered another xz2c
So if Sony doesn't resolve the touch screen issue themselves, probably it will be solved by Google in the next major Android update.
It bugs me, but I can live with it, and I want to believe it will be resolved. Basically I don't see any other phone that will fulfill me in battery life + 2018 SoC + not huge size. My only alternative would be a S9 with lineage OS, but buying an expensive phone with the intention of voiding warranty on day 1 is not a good approach I think.
Probably the Xiaomi mi7 would be a good alternative, but we're months away from its release.
No phone is perfect, so I prefer something that fits my pocket and I don't have to charge in the middle of the day, even if it means a poor gaming experience.
Click to expand...
Click to collapse
well said i agree all points and not to mention s9 users, treble or not, i really don't think will get a fully functioning los, with perfect cam quality like stock etc, or at least not immediately! plus s8/s9 are already too big for me, and TW is not an option at all. mi7 also will be bigger than this one.
yeah I'm following that thread and saw what you guys realized, I'm happy it is not a Sony problem so this is probably going to be sorted out.
I'm really enjoying this phone, not perfect of course but has many pros, and dimensions are wonderful.
will wait for your feedbacks about covers and glasses.. bye!
FcukBloat said:
well said i agree all points and not to mention s9 users, treble or not, i really don't think will get a fully functioning los, with perfect cam quality like stock etc, or at least not immediately! plus s8/s9 are already too big for me, and TW is not an option at all. mi7 also will be bigger than this one.
yeah I'm following that thread and saw what you guys realized, I'm happy it is not a Sony problem so this is probably going to be sorted out.
I'm really enjoying this phone, not perfect of course but has many pros, and dimensions are wonderful.
will wait for your feedbacks about covers and glasses.. bye!
Click to expand...
Click to collapse
I thought the same about the S8 and S9 at the beginning, but I ended getting a S8 last year and it's very comfortable in hand, despite the size.
I understand you have different preferences, I don't need my phone to be compacts, but I don't want to be huge. Let's say the S8/S9 is my limit. Something like a Oneplus, the bigger XZ2, etc. would be uncomfortable for me. Maybe I will buy a Mi7 later this year, but I doubt it.
Well the screen protectors were fail, they didn't grip around the curved screen edge at all. The Olixar case sux, it's very slippery and prone to finger prints. I do like the Kugi case, it's grippy and it feels stout and durable. The raised edges also will protect the screen well if u lay the phone screen down.
I got this one: https://www.amazon.com/Colorful-Ult...d=1525256695&sr=8-1&keywords=xz2+compact+case
Really happy with it, great case.
This is the case I got: http://a.co/4iwmOZU
I quite like it and just left a review with photos. I definitely recommend looking at my photos, as the actual product is a little different than the mock-ups. Particularly on the corners.
Belk Sony Xperia XZ2 Compact Case
AgentOrange96 said:
This is the case I got:...
I quite like it and just left a review with photos. I definitely recommend looking at my photos, as the actual product is a little different than the mock-ups. Particularly on the corners.
Click to expand...
Click to collapse
Does it have raised edges in order to protect the screen? If not, do you use a screen protector?
robmb said:
Does it have raised edges in order to protect the screen? If not, do you use a screen protector?
Click to expand...
Click to collapse
It does not. I plan to get a glass screen protector once a good one exists.
Olixar FlexiShield
I've tried a Olixar FlexiShield. It fits tight on the phone, creates an edge maybe 1mm above the screen, it's smooth and comfortable to touch and hold.
There's no extra padding in the corners and the buttons become difficult to operate.
for less than 10 €, i'am very satisfy
this one is not realy elegant but give a very good protection for 5€ FPI !
this one is elegant and thin as a 2nd skin
but don't give a big protection for 5€ FPI !
i baught those 2 on amazon.fr in the marketplace here :
https://www.amazon.fr/gp/product/B07CDCR2PK/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
and here
https://www.amazon.fr/gp/product/B07CCM66R8/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
Well, let's see how this develops...
As for a case, I got these two for starters:
https://www.amazon.de/Spigen%C2%AE-Elastisch-Stylisch-Handyh%C3%BClle-Schutzh%C3%BClle-RA-Schwarz/dp/B07B9SKC5K/ref=sr_1_1?ie=UTF8&qid=1527018512&sr=8-1&keywords=motorola+g6+plus+h%C3%BClle+spigen&dpID=510FXckhR3L&preST=_SY300_QL70_&dpSrc=srch
https://www.amazon.de/iBetter-Shock...pID=51XML3FlA7L&preST=_SY300_QL70_&dpSrc=srch
I like the Spigen better, they do quality cases for a reasonable price. Look and feel is way better than the iBetter.
Hi @Howlbeck,
I don't recommend the first one... I have a similar one for my Moto G5+ and it makes the phone very big. It's pure plastic!
For the second case, it may be thinner. So if you purchase it, please comment about it.
Any idea for a good screen protector?
Regards.
i bought mine like the first one and its really thin but it can absorb some falls and protects camera .
RokCruz said:
i bought mine like the first one and its really thin but it can absorb some falls and protects camera .
Click to expand...
Click to collapse
Please, can you share real photos of it?
Thank you!
manos78 said:
Please, can you share real photos of it?
Thank you!
Click to expand...
Click to collapse
Sure! here you are:
I cant take a photo of my phone wearing it because i havent other device.
Same here - only difference: my one has "spigen" plus the logo imprinted. The other 2 pics are the IBetter.
https://imgur.com/a/MsSBz1U
To be honest, Manos:
I don't like cases at all, but I need them to give me some protection for my clumsyness... ;o)
When I'm at home or at stationary work, the case(s) comes off.
The one Motorola includes with the device is ok, but... Big but.
I do like soft, transparent cases - but they tend to fade to yellowish pretty quick, doesn't matter if you are smoking yourself or not.
As there is no soft transparent case available as of yet - the Spigen it is.
Howlbeck said:
To be honest, Manos:
I don't like cases at all, but I need them to give me some protection for my clumsyness... ;o)
Click to expand...
Click to collapse
Me too!
I'll continue searching for a very lighty case.
Thank you!
Can anyone suggest me a case that adds grip to the phone since the glass back makes it very slippery? Too bad dbrand's grip case is not available for the Moto g6 plus .
As there are not many cases available right now, I think any case gives you a better grip currently. It's a matter of getting used to handling it without a case - as mentioned above, being inside I don't use cases - only while being outdoors as mentioned above.
As for cases making the phone bigger - well
The G6+ already is big, so I don't really care about a few more mms as long as it protects the device properly. Spigen did a very good job in the past, so I tend to coming back.
Compared to our Nexus 6P (Huawei) - this is "smaller" overall, barely bigger (taller, mostly) than the old Nexus 5X (LG) but - between Mrs. and myself, one of us will be using it. For an entry/budget Project Fi phone priced at $199 + tax, free shipping, I am very pleased with how it feel, look & setting it up, waiting for the case to arrive (delayed in transit ... by a day)
This is what I ordered, found it on Amazon - not a major "brand" name but appeared to provide the extra protections that we usually look for, and should not be too bulky. Otherwise, it does feel slippery especially with one-handed mode and we are know, sooner or later, it will be dropped accidentally - a little extra help on the corners & edges won't hurt. If a better & nicer case come up, I don't have a problem spending more or having an extra one around.
https://www.amazon.com/gp/product/B07DCKVM5B/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Once I get that, will put up pictures & have a side-by-side with the N6P (and, most likely, before I ship out the N5X ... battery is starting to not hold its charge, taking advantage of the "generous" trade-in allowance valued at $95, not bad - net cost to get the G6 is something I can live with, i.e. minus NFC, no G.Pay)
Been using Supershieldz's Glass screen protector and pleased with it, got 2 of them, so always have a spare around, just in case - put it on easily this afternoon, almost got it perfectly but at 98.5% - missed 2 spots with tiny dust trapped, but, who's going to notice it when device is powered on - only notice it when screen is dark/blank or powered off. Here's what they look like now.
Hi,
Regarding the screen protector, someone has used this "full screen" version?
https://www.amazon.co.uk/SDTEK-Moto...ns&keywords=SDTEK+Motorola+Moto+G6+Plus&psc=1
The other option is the "classic" glass:
https://www.amazon.co.uk/SDTEK-Moto...ns&keywords=SDTEK+Motorola+Moto+G6+Plus&psc=1
I like to know the difference.
manos78 said:
Hi, Regarding the screen protector, someone has used this "full screen" version? ... The other option is the "classic" glass ... I like to know the difference.
Click to expand...
Click to collapse
The first one has the cutoff around the earpiece, speaker & front camera openings, covered the front of the smartphone all around (and it's priced higher) ... should be precision cut - careful alignment & placement when installing is a must.
The second one is easier for them to produce with the simple cut out, and "could" leave some of the digitizer/screen area "less" protected ... installation is basically the same but a very slight misaligned placement should still be fine during the installation process. It's similar to the one that I just installed yesterday - with a protective bumper case over it, the odds of scratching or damaging the Gorilla glass is still fairly low. Plus, I make it a habit to always order an extra spare & set it aside, just in case - the old one that I used on the Nexus 5X has a lifetime & free replacement warranty, no questions asked - just proof of it being worn/damaged & they quickly mail a new one at no charge (worth paying a little more for those brands upfront).
On a side note, this Moto G6 ... is "cute" and slim, feel "small" in the hand but with the 5.7" widescreen ratio, is very nice for the price level - too slippery to use without a case when holding it (especially with the glass back.)
manos78 said:
Hi,
Regarding the screen protector, someone has used this "full screen" version?
https://www.amazon.co.uk/SDTEK-Moto...ns&keywords=SDTEK+Motorola+Moto+G6+Plus&psc=1
I like to know the difference.
Click to expand...
Click to collapse
The full one has the black border on it, which also covers up the works motorola which I like...here is a pic of my wifes phone with the screen protector and an amazon case
Screen Protector x2 $6.98: https://www.ebay.com/itm/2X-ZenTech...ector-Guard-For-Motorola-Moto-G6/332666677282
Case $8.98 : https://www.amazon.com/gp/product/B07B4YHKTP
My Amazon G6 case arrived, and it came also with a clip-on face plate for belt carry ... something that is "nice" but I dislike, the hardware/spring doesn't look solid & could break - won't be nice to drop this at a height of several feet, unlike using one of those bulky Otterbox. Not going to use it - I either carry mine in a pocket or otherwise, use a BDU-style canvas pouch (in black).
Here are pictures of the G6, it's in the middle, for comparison with the Nexus 6P (Huawei) and the (LG) Nexus 5X (without the same style protective case) "naked" on the right for comparison.
The HD glass protector do leave a little area around the front surface of the G6 without "coverage" - dusts & lints, dirts could collect around the rim of the case/frame, so a periodic cleaning will be necessary, see the 2 close-up pictures.
We also have the old Motorola Nexus 6 and that's "big" compared to these - the G6 is about the same size as my dual-sim Huawei Honor 5X which I use for travel - the Moto G6 is very comfortable & feel solid being held in one hand with the case, providing a non-slippery hold ... and, it slide right into my old canvas belt pouch for "rough" day-to-day carry outside.
ryancell said:
The full one has the black border on it, which also covers up the works motorola which I like...here is a pic of my wifes phone with the screen protector and an amazon case
Screen Protector x2 $6.98: https://www.ebay.com/itm/2X-ZenTech...ector-Guard-For-Motorola-Moto-G6/332666677282
Case $8.98 : https://www.amazon.com/gp/product/B07B4YHKTP
Click to expand...
Click to collapse
Thank you! I feel I'll purchase the full screen protector. :good:
manos78 said:
Thank you! I feel I'll purchase the full screen protector. :good:
Click to expand...
Click to collapse
Keep in mind the full ones only have the adhesive around the outer edges and can pop off easily if you don't have on a case that protects the edges. But at the cost, they last a long while in my experience and look great!
Howlbeck said:
As there are not many cases available right now, I think any case gives you a better grip currently. It's a matter of getting used to handling it without a case - as mentioned above, being inside I don't use cases - only while being outdoors as mentioned above.
Click to expand...
Click to collapse
Thank you for the info. In that case I'll wait until some intermedium solution will appear.
Regards.
I got the Poetic Karbon Shield, nice slim case, fits really good and adds a bit of grip on the sides. https://www.amazon.com/Poetic-Karbo...529368131&sr=8-4&keywords=moto+g6+poetic+case
I like the Spigen better, they do quality cases for a reasonable price. Look and feel is way better than the iBetter.
Click to expand...
Click to collapse
For every phone I buy a Spigen case. I also bought for Moto G6 and I was not disappointed.