Code:
#include <std_disclaimer.h>
/*
* Your warranty is now probably void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
Features:
- Energy Aware Scheduling (EAS) *What is EAS? See here
- Always Upstream with Latest Linux Stable
- Support AOSP & MIUI
- Support Android Pie, Android Q, Android Oreo (Test)
- CPU OC 2208 MHz
- Vibration intensity control
- Fsync: on/off support
- USB Fast Charge
- Vibration intensity control
- KCAL color control
- KLAPSE Control
- Display Backlight (Max & Min)
- Sound Control (Microphone & Headphone Gain)
- Wakelock: Boeffla Wakelock Blocker
- Adreno Idler
- Adreno Boost
- I/O schedulers:
noop
deadline
cfq (default)
anxiety
bfq
fiops
sio
- EAS CPU Governors :
- Schedutil
- CPU Governors:
ondemand
powersave
performance
- GPU Governor:
spdm_bw_hyp
bw_hwmon
venus-ddr-gov
msm-vidc-vmen
msm-vidc-ddr
bw_vbif
gpubw_mon
msm-adreno-tz (default)
cpufreq
userspace
powersave
performance
simple_ondemand
- And more features
Installation:
- Reboot Custom Recovery (TWRP / PBRP / OrangeFox)
- Backup boot, system, vendor
- Install Kernel
- Reboot system
Bugs :
Looking for another bug
Download:
Mystic Kernel Latest Version
Thanks TO :
AnyKernel2 for Flashable ZIP
Some my kernel testers
And thanks to anyone for telling me bug this kernel
And you
Like my work? U can support me here: Paypal
Join Telegram Chanel
Mystic Update: MysticKernel
Mystic Discussion: MysticKernelDiscussion
Leave thanks if you like this Kernel
XDA:DevDB Information
Tulip Mystic Kernel, Kernel for the Xiaomi Redmi Note 6 Pro
Contributors
Okta. Pra A
Source Code: https://github.com/okta-10/mystic-kernel-sdm660.git
Kernel Special Features: Energy Aware Scheduling (EAS), Overclock CPU
Version Information
Status: Stable
Created 2019-11-04
Last Updated 2020-08-12
Reserved
Download: Mystic Kernel Latest Version
Awesome, thx bro, I try....
Sent from my [device_name] using XDA-Developers Legacy app
bogesy said:
Awesome, thx bro, I try....
Sent from my [device_name] using XDA-Developers Legacy app
Click to expand...
Click to collapse
Yeah, go for it [emoji3]
Sent from my Redmi Note 5 using Tapatalk
This is the best kernel for tulip! Oc version easily beat kangaroox oc on performance while not overheating! Non OC is the best battery friendly I have ever seen. Tried every kernel we have but damn yours is the king in town right now! Keep up working! We are now getting Q roms (almost stable), so much potential users for mystic. You are needed, man!
wdevil12 said:
This is the best kernel for tulip! Oc version easily beat kangaroox oc on performance while not overheating! Non OC is the best battery friendly I have ever seen. Tried every kernel we have but damn yours is the king in town right now! Keep up working! We are now getting Q roms (almost stable), so much potential users for mystic. You are needed, man!
Click to expand...
Click to collapse
Woooww [emoji15][emoji15][emoji15]
Thanks bro, already using this kernel [emoji16][emoji16][emoji16]
and thank you for supporting
I have been using R1 nonOc. It easily gave 10 hours of SOT while being always on 4G data. And hours of playing music on background when screen is off. Now I'm on R2 OC to play pubg mobile. God I never had this smooth experience before. I already love your work, man!
Im gonna test now.Im happy for 62hz display dude
[email protected] said:
Im gonna test now.Im happy for 62hz display dude
Click to expand...
Click to collapse
Go for it ???
wdevil12 said:
I have been using R1 nonOc. It easily gave 10 hours of SOT while being always on 4G data. And hours of playing music on background when screen is off. Now I'm on R2 OC to play pubg mobile. God I never had this smooth experience before. I already love your work, man!
Click to expand...
Click to collapse
Yeah,
even though I don't have tulip, but am very happy to hear that ????
So, good Kernel. Smooth, stable, even on OC battery charge hold on very pretty) Thanks for your work!
xeno_den said:
So, good Kernel. Smooth, stable, even on OC battery charge hold on very pretty) Thanks for your work!
Click to expand...
Click to collapse
Thanks for supporting broo [emoji16][emoji16][emoji56]
This was so good When I was playing pubg with gfx tool
by 60 fps.... WoooooWwwww Dream came true , Thanks buddy.
Nice kernel but tooooo long charging time?
anoj121 said:
This was so good When I was playing pubg with gfx tool
by 60 fps.... WoooooWwwww Dream came true , Thanks buddy.
Click to expand...
Click to collapse
Your welcome buddy [emoji16][emoji16][emoji16]
vijaymk said:
Nice kernel but tooooo long charging time[emoji53]
Click to expand...
Click to collapse
Yeah,
it's different with another user
which is best for smooth gaming and battery backup
OverLock/NonOverLock??
It looks 60 fps all the time thats good idea.Im very like it.Phone not warming like other kernels thats my first
impression.GJ dude
Can i use it in PE rom android P? Thanks!
imonshahed said:
which is best for smooth gaming and battery backup
OverLock/NonOverLock??
Click to expand...
Click to collapse
Non overclock i think is good [emoji16]
Related
ALL SOURCE CAN BE FOUND HERE
I am proud to announce Savage-Kernel to the xda forms. This kernel is worked from the latest cm unified kernel; undervolted, HAVS with the SBC mod.
SENSE BASED ROMS NOT SUPPORTED THIS IS FOR AOSP ROM'S ONLY
According to ms79723 we are the first AOSP kernel to have the latest SBC mod with the new voltage and A/C AND USB trickle charging
So far the Kernel works great in conservative governor. which all the devs prefer.
Devs:
luisrcastillo (co-creator)
jsseidel1 (co-creator)
Credits:
toastcfh/cyanogen/cyanogen dev's --> the cm base kernel!!
ms79723 --> the SBC mod.
netarchy --> smartass gov
intersectRaven --> HAVS
lithid-cm (contributer. Updater-script guru)
ms79723 (SBC mod updates)
(credits are given to the dev's where we got some code from, may no be original designer)
CFS Builds:
v1.6 noSBC : Click here to download
BFS Builds:
v1.6 : Click here to download
Follow the github on twitter @evokernelsrc
If you like our kernel and want to support us... donate (goes to a group pay pal for Luis and I)
CHANGELOG
Code:
[B]Beta 1[/B]
Undervolted to 925
HAVS implemented configured for conservative
smartass added for fans
SBC Mod added (trickle Charging)
Enabled OC to 1.19 and stable
[B]Beta 2[/B]
SBC v5 (USB trickle added as well as modified voltage)
HAVS tweaks
smartass governor tweaks
conservative governor tweaks
[B]Beta 2.5[/B]
conservative governor tweaks
HAVS tweaks
[B]Stable v1[/B]
conservative governor tweaks
smartass governor tweaks (now recommended)
reverted back to SBC v4 due to USB trickle bug..(causes usb connection to disco) (i.e USB trickle doesnt work in this build)
HAVS tweaks
voltage tweaks
BFS360 (latest version) and CFS VERSION!!!
[B]Stable v1.1[/B]
SBC v7 -mA fix... still no USB trickle yet
merged latest cm-kernel commits, to include new wifi drivers
[B]Stable v1.2[/B]
Added SBC v7 USB charging and got rid of bugs
BFS tweaks to ondemand gov
tweaks to interactive gov
bad ass CFS tweaks!!!!!
[B]Stable v1.3.4[/B]
Core Kernel tweaks
CM7 wifi drivers added
aggressive swap drop
misc tweaks
[B]Stable v1.5.2[/B]
voltage tweaks
better memory handling
New BFS version
Fixed all Wifi issues
Put new Cam drivers and other new drivers in there
[B]Stable v1.6[/B]
Upgraded to CM .10 commits (CM7 Kernel)
Added Wimax (you still need a wimax enabled ROM)
FAQ's
All answers are based off latest stable build
Which governor should I use?
Use Conservative for best battery, if you get any lag or choppy or shutter switch to either Smartass or interactive.
Which governors are tweaked?
Conservative and Smartass
I'm running smartass and having screenwake issuesm what do I do?
We suggest you set up a screen off profile of 245/384 to avoid the wake issue.
Have any more? Just ask!!
I fixed up my USB/AC charging tweak. I'll pm you as soon as I update my github in a bit
ms79723 said:
I fixed up my USB/AC charging tweak. I'll pm you as soon as I update my github in a bit
Click to expand...
Click to collapse
Sounds good. I'm working hard this morning on HAVS and governors... Luis was up all night getting the first private beta. Looking for about 5 testers that run AOSP roms to test. Barnacles is going to already, once Luis gets up we need to review the apps that came in... we should release a public by Thursday. Maybe tomorrow depending on the feedback from the private testers.
jsseidel1 said:
Sounds good. I'm working hard this morning on HAVS and governors... Luis was up all night getting the first private beta. Looking for about 5 testers that run AOSP roms to test. Barnacles is going to already, once Luis gets up we need to review the apps that came in... we should release a public by Thursday. Maybe tomorrow depending on the feedback from the private testers.
Click to expand...
Click to collapse
I would like to test the new kernel.
I can test for you guys.
Sent from my Liquid using XDA App
I'd be willing to test as well.
Hopefully others will come along and do the same thing you guys are doing but make it open to the full community and not do private selections. This does look like it has promise but until it gets made public and not private invites I will stay away from it
EJerVJerO said:
Hopefully others will come along and do the same thing you guys are doing but make it open to the full community and not do private selections. This does look like it has promise but until it gets made public and not private invites I will stay away from it
Click to expand...
Click to collapse
it will be, we just want to make a good first beta, future betas will be released right away. if our testers today give us good feedback and are very responsive... we will release the 1st public beta tomorrow, and then it will be norm... We dont get a picky about testing as snap. Zendroid doesnt release betas until he's done private testing, just we announced before the 1st public release.
All: Private beta testing is closed... we got enough guys already, got bombarded with requests this morning. Appreciate all the intrest, hopefully the users we selected will get us feedback asap so we can get out the public beta
BTW beta 1 so far getting 1435 on quadrant in gingerbread.
52fps
and 42 in linpack.
We will have a public release tomorrow
Sent from my PC36100 using XDA App
Beta 1 released
please look at the OP... BETA 1 has been released!!
Just downloaded. Gonna give it a shot. Thanks guys!
blackroseMD1 said:
Just downloaded. Gonna give it a shot. Thanks guys!
Click to expand...
Click to collapse
great please post your thoughts
Do I have to use SetCPU w/ this and modify my min/max? If I don't use SetCPU, will I achieve the trickle charge effect w/ the prolonged battery AND how will this affect my EVO's speed?
typeadam said:
Do I have to use SetCPU w/ this and modify my min/max?
Click to expand...
Click to collapse
No, you dont it defaults to conservative. you have to use SetCPU to change your min.max
typeadam said:
If I don't use SetCPU, will I achieve the trickle charge effect w/ the prolonged battery
Click to expand...
Click to collapse
Yes the trickle charge (SBC) has nothing to do with SetCPU. the BETA 1 only have a/c trickle so the USB charge will be normal. the next release will have the USB trickle as well. Make sure you charge it at least 30min after it says fully charged the first time.
typeadam said:
AND how will this affect my EVO's speed?
Click to expand...
Click to collapse
off the bat your battery life will be great, and speed will be alot snappier. Overclock for a safe speed boost, but its not required.
enjoy
I'm going to test it with CM 6.1.1
jsseidel1 said:
great please post your thoughts
Click to expand...
Click to collapse
Well, the first thing I noticed is I got my USB icon back, but it says that "There was a problem turning off USB...". Whenever I click on it, it kills the status bar.
That may be a problem with the ROM itself though, as everytime I reboot, I get "SD Card unexpectedly removed" error. The Kernel seems smooth as silk though after initial boot, and I will report back on battery life later.
[url=https://postimages.org/]
[/URL]
This is a home of new re branded yarpiin kernel for Lineage OS based roms.
Would like to thank to all devs that work has been used to create this kernel.
SO WE STARTING A LIST:
all CREDITS goes to:
@Grarak
@Mahdi786
@Lord Boeffla
@franciscofranco
@ Despair Factor
@ak
@ZaneZam
@varun.chitre15
@flar2
@arter97
@TheCrazyLex
@Sultanxda
@eng.stk
@neobuddy89
@Tkkg1994
@frap129
@jcadduono
@savoca
@yank-lu.555
@Dorimanx
@acuicultor
@Alucard24
@bbedward
@nathanchance
@Maxwen
@mostafaz
@joshuous
@faux123
@rainforce279
@Paranoid Android Team
and all others devs that make our lives easier.
Special thanx for @urgali , @Sungfive and @Duncan1982 for testing .
@Cybertron™ for new thread and signature images.
@Saber for his superb thread with all detailed kernel stuff.
Short Feature list:
Basic Governors plus:
Darkness, Nightmare, Alucard, Impulse, Blu Active
Overclocked both clusters
Adjustable thermal driver
Power Efficient Workqueues
State Notifier Driver
I/o schedulers: fiops, sio, zen, maple
Adrenoboost
Adreno Idler
Simple gpu algorithm
Backlight dimmer
Kacal control
Power Suspend driver
USB Fast Charge
Eagle DTS driver
Built in Busybox
Uses a simple free and user friendly application called Synapse by @AndreiLux for configuration purposes(slightly adding more functionality)
Synapse is included in zip and flashed by default as a system app.
Synapse is based on new UKM - Lite version. It does contain less settings than standard version for less advanced users. For those who wish to use full power of Synapse additional UKM zip have to be flashed after Kernel.
UKM Full flashable zip download link
https://www.androidfilehost.com/?w=files&flid=154993
Flashing instructions
1. Flash in recovery no black magic
3. If missing tunables for governors set SElinux to permissive
Compatibility list:
LOS Kernel have been tested with official Lineage OS 15.1
PA Test Kernel works with AOSPA and its based on Paranoid Android Kernel Source and all credits belong to Paranoid Android Team.
And Finaly Download Link:
WHITE WOLF LOS 15.1
https://www.androidfilehost.com/?w=files&flid=253747]
WHITE WOLF AOSPA test kernel (Paranoid Android )
https://www.androidfilehost.com/?w=files&flid=186508
LOS Source
https://github.com/yarpiin/White-Wolf-OP3-LOS
PA Source
https://github.com/yarpiin/White-Wolf-OP3-PA
If You like my work buy me a beer https://www.paypal.me/yarpiin
XDA:DevDB Information
White Wolf Kernel, Kernel for the OnePlus 3
Contributors
yarpiin
Source Code: https://github.com/yarpiin
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: WHITE.WOLF.OP3.XXX
Stable Release Date: 2017-05-30
Created 2016-12-22
Last Updated 2018-11-30
WHITE.WOLF.OP3.LOS.15.1 - Changelog
https://github.com/yarpiin/White-Wolf-OP3-LOS/blob/master/changelog.txt
WHITE.WOLF.OP3.PA - Changelog
[url]https://github.com/yarpiin/White-Wolf-OP3-PA/blob/nougat-mr2/changelog.txt[/URL]
Hall Of Fame
This is a list of people who contributed donations to this project or helped in it
Helpers
- @urgali
- @Sungfive
- @Duncan1982
- @Cybertron™ - Thread and signature images
Donators
- @urgali
- @A Sad Napkin
- @real76
- Unknown memeber named Amir
- @ctakah27
- SB
Thank you a lot !!!
Signature Image Link
thanks!
I am downloading
Thanks man 5 stars from me
Thanks ! Wait for OxygenOS Version
Gesendet von meinem ONEPLUS A3003 mit Tapatalk
Wow awesome thx. Running very nice with my suicide squad rom. Awesome fast and smooth. Your kernel has potential keep it up
Flashed to XenonHD.
Very smooth!
Great kernel.
Keep it up.
I build a kernel and thanks for posting source I see a few govs I will add to my list
Sent from my ONEPLUS A3000 using XDA-Developers mobile app
ZeNiXxX said:
Wow awesome thx. Running very nice with my suicide squad rom. Awesome fast and smooth. Your kernel has potential keep it up
Click to expand...
Click to collapse
I'm bout flash on same.rom, lol
Uhh, something to play with on Nougat!
Good stuff
@yarpiin Have You plans to implement OC?
rafciowis1999 said:
@yarpiin Have You plans to implement OC?
Click to expand...
Click to collapse
Hi sorry but no or maybe no :silly: i was thinkin about it but im not a big fan of OC i can OC my PC ( actually higly OCed ) but not mobile chip i think we have enough of cpu power but maybe in future i will change my mind - just for now dont see any strong reason to do it
Sent from my ONEPLUS A3003 using XDA Labs
yarpiin said:
Hi sorry but no or maybe no :silly: i was thinkin about it but im not a big fan of OC i can OC my PC ( actually higly OCed ) but not mobile chip i think we have enough of cpu power but maybe in future i will change my mind - just for now dont see any strong reason to do it
Click to expand...
Click to collapse
Good reason.
I think OC will be good but not as default.
Backporting i/o schedulers and governors from newest linux will be great too (mostly cfq, deadline and interactive).
Only request would be sound controls if possible to add from ex kernel or wherever...? Running alacurd and hotplug and it's buttery smooth and awesome battery! Good job with this bro
---------- Post added at 12:33 AM ---------- Previous post was at 12:33 AM ----------
Will have any chance to make profiles for synapse?
yarpiin said:
Hi sorry but no or maybe no :silly: i was thinkin about it but im not a big fan of OC i can OC my PC ( actually higly OCed ) but not mobile chip i think we have enough of cpu power but maybe in future i will change my mind - just for now dont see any strong reason to do it
Sent from my ONEPLUS A3003 using XDA Labs
Click to expand...
Click to collapse
The only OC that is useful for this phone is upping the big cores to 2.26ghz and the little to 1.72ghz. The voltage stays the same so you get a minor speed bump but power draw is identical. This in turn gives slightly better battery life because the phone can go back to idle slightly quicker. Anything higher starts causing the phone to thermal throttle much quicker, well in my case that is.
Also, I see you have implemented hotplugging, as mentioned in many different kernel threads for multiple devices that use big.LITTLE (OP3, S6, etc.) This is uncessary and causes more battery drain while also reducing performance because these cores were designed to go idle when not in use consuming nearly zero energy. Hotplugging makes these cores jump between on and off all the time and lower and higher frequencies because of the way big.LITTLE works which causes massive microstutter and also much higher battery drain.
In the good old S6 days a couple devs tried to implement it but it never worked no matter what they tried. Sultan, one our devs here, makes an amazing custom kernel/ROM combination. He had implemented hotplugging when he first released the kernel but it turned out to not fully work properly and caused extra battery drain and microstutters. He removed it and it fixed all the issues.
Edit: haven't used the kernel yet because cm14.1 is a bugfest so this is just speculation, you could have added a little magic and it performs super well.
yung40oz84 said:
I'm bout flash on same.rom, lol
Click to expand...
Click to collapse
Suicide squad rom?
crzykiller said:
The only OC that is useful for this phone is upping the big cores to 2.26ghz and the little to 1.72ghz. The voltage stays the same so you get a minor speed bump but power draw is identical. This in turn gives slightly better battery life because the phone can go back to idle slightly quicker. Anything higher starts causing the phone to thermal throttle much quicker, well in my case that is.
Also, I see you have implemented hotplugging, as mentioned in many different kernel threads for multiple devices that use big.LITTLE (OP3, S6, etc.) This is uncessary and causes more battery drain while also reducing performance because these cores were designed to go idle when not in use consuming nearly zero energy. Hotplugging makes these cores jump between on and off all the time and lower and higher frequencies because of the way big.LITTLE works which causes massive microstutter and also much higher battery drain.
In the good old S6 days a couple devs tried to implement it but it never worked no matter what they tried. Sultan, one our devs here, makes an amazing custom kernel/ROM combination. He had implemented hotplugging when he first released the kernel but it turned out to not fully work properly and caused extra battery drain and microstutters. He removed it and it fixed all the issues.
Edit: haven't used the kernel yet because cm14.1 is a bugfest so this is just speculation, you could have added a little magic and it performs super well.
Click to expand...
Click to collapse
I don't believe the hotplug theory, I've used it with and without hotplug on this device and the 6P and when using hotplug it clearly saved battery, by a good shot too! You dint have to use it, that's why u can enable/disable, but I'm sure it saves battery as I've tested with it enabled and disabled two devices with the big.LITTLE setup. And honestly, besides one other kernel that is not in these threads, this is the best kernel I've used to date for the OP3, on CM that is, not stock. I've ran ex, boeffla, all CM kernels and as I mentioned one other not located in these threads and that one and this are damn good, they each have their benefits, and the hotplug def saved battery as I've already passed my regular SOT at 40 percent left. Of course I will test without, but with my previous tests on the 6P the hotplug continuously saved battery. Sometimes it mate cause stutter or slowness, but I have not noticed that on the OP3 as of yet, it hasn't slowed a thing down, and there are 2 hotplug options in this kernel, and the hotplug in the 6P was msm which is not one that's in this kernel. This has two other options, alacurd and autosmp.
OC - as i said if there are solid reasons then yes might think about it . But from theory higher frequency equals higher temp and faster thermal throttling
Hotplugging - never heard about theory that make hotplugging causing more battery drain than keeping all clusters/cores online it is a bit non sense for me. Anyway stock Qualcomm kernels are hotplugged using msm performance and core ctl . As i dont like them they been replaced by custom made hotplugging drivers that are optional you can activate and deactivate driver as you wish
CM14.1 - I was on official and now on RR and havent noticed any major bugs neither small ones , they are solid enough to be a daily drivers
Sent from my ONEPLUS A3003 using XDA Labs
Introduction
Hello everyone, this is my personal Nexus 5X kernel. The main objective is to provide balanced performance/battery without decrease stability
I usually take patches from these sources:
LA.BR.1.3.7_rb1.8 (CAF)
google/common/3.10
Upstream updates from Linux
Hopefully enjoy!
Features
Updated to latest security patch
Build with latest GCC 10.2 and -O3 gcc optimization
Faux Sound Control
KCAL Color Control
Backported Zram,slimbus from 3.18
Memory I/O functions Optimization
Energy aware scheduler backported from marlin
boeffla Wakelock controls
Power Efficient workqueues
Updated RCU from CAF
wireguard support
CVE fixes
Available CPU governors : sched, ondemand, powersave, performance
Available I/O schedulers : noop, deadline, row, cfq(default)
Downloads
https://www.androidfilehost.com/?fid=1899786940962587977
Thanks To :
@The Flash, @jollaman999, @franciscofranco, @neobuddy89, @flar2, @frap129, @myfluxi, @sultanxda, @aviraxp, @osm0sis
and @edoardotavecchio for test this kernel
XDA:DevDB Information
Shadow Kernel, Kernel for the LG Nexus 5X
Contributors
mr.ace
Source Code: https://github.com/mortezadadgar/shadow
Created 2017-08-06
Last Updated 2019-06-17
XDA:DevDB Information
Shadow Kernel, Kernel for the LG Nexus 5X
Contributors
mr.ace
Source Code: https://github.com/mortezadadgar/bullhead
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 20180617
This looks cool yo
@mr.ace Thanks for bringing more support to the 5X dude
Also are there any plans for you to add overclocking and underclocking in the future?
Thx..
Flash with aospa rom
When my Nexus 5X arrive from service centre (for 2nd time) I will try it!!
HesThatGuy said:
@mr.ace Thanks for bringing more support to the 5X dude
Also are there any plans for you to add overclocking and underclocking in the future?
Click to expand...
Click to collapse
You're welcome
There no benefit for OC/UC on our SoC
D00 said:
Thx..
Flash with aospa rom
Click to expand...
Click to collapse
It's fine:victory:
mr.ace said:
You're welcome
There no benefit for OC/UC on our SoC
Click to expand...
Click to collapse
For me personally I find that OC helps out a bit with heavier apps like Chrome, YouTube, and games but if you see no reason to add it then that's cool.
You should test it out yourself maybe and see if you like it.
HesThatGuy said:
For me personally I find that OC helps out a bit with heavier apps like Chrome, YouTube, and games but if you see no reason to add it then that's cool.
You should test it out yourself maybe and see if you like it.
Click to expand...
Click to collapse
OC isn't everything about performance there's some other thing like 4.1.39 Radom driver that could improve it more
Thanks. Fast and battery friendly !:good:
Thanks..!! And hope you will update it when new goodies come..!!
Sent from my Nexus 5X using XDA-Developers Legacy app
Has anyone on Dev preview 4 tried this kernel?
kevtrysmoddin said:
Has anyone on Dev preview 4 tried this kernel?
Click to expand...
Click to collapse
Works fine , smooth and stable
Shadow Kernel 1.1
Thanks for feedback, that keep this project alive. I merged somethings for save even more power I hope you'll like this version
Changelog :
August security update
Extra CVE fixes Thanks to @The Flash
ext4 updates
cpu-boost driver Improvements
lpm-levels driver Improvements to save power
Downloads :
https://www.androidfilehost.com/?fid=745425885120754233
I noticed some battery drain over night after installing the kernel yesterday.. usually i lose 0 to 1% but now i got from 79 to 68% nearly 10%
EDIT: it was v1.0 of the kernel..
Sent from my Nexus 5X using XDA Labs
Just tried out v1.1 yesterday and was loving it until I encountered this odd malfunction.
running the latest PixelRom, I would go to play audio over my 3.5mm AUX jack, and it would play the first song just fine, then all subsequent songs just wouldn't play, even though the phone said it was, in fact playing.
To get it to work again, I would have to remove the aux cord and re plug it in or completely kill the music player app; and even then, I would only get 1 additional play.
This was occurring on multiple music players until I flashed back over to the Franco kernel, so I'm inclined to think it has to do with your kernel.
Keep up the good work though! I loved the performance I was getting on your kernel, seemed nice and agile
How is the battery life on this kernel? I am considering trying it out but I am a little uncertain if the battery will hold up.
What did some of you guys achieve on standby and screen on time?
TayyabKhalid97 said:
How is the battery life on this kernel? I am considering trying it out but I am a little uncertain if the battery will hold up.
What did some of you guys achieve on standby and screen on time?
Click to expand...
Click to collapse
I never take care of stats like SOT or anything similar because I think that they're too objective and variable to be considered as a reliable source of information. Anyway, I noticed a significant improvement in battery life since I'm using this kernel (this improvement is to be considered in comparison to all the other kernels, since I've tried all of them). However, remember that the battery life is 99% objective so take this information with a pinch of salt.
AntonPanos said:
I noticed some battery drain over night after installing the kernel yesterday.. usually i lose 0 to 1% but now i got from 79 to 68% nearly 10%
EDIT: it was v1.0 of the kernel..
Click to expand...
Click to collapse
Flash 1.1 and tell me what happen, I can't test stanby drain because I don't have good drain at all(even on another kernels)
jimbub said:
Just tried out v1.1 yesterday and was loving it until I encountered this odd malfunction.
running the latest PixelRom, I would go to play audio over my 3.5mm AUX jack, and it would play the first song just fine, then all subsequent songs just wouldn't play, even though the phone said it was, in fact playing.
To get it to work again, I would have to remove the aux cord and re plug it in or completely kill the music player app; and even then, I would only get 1 additional play.
This was occurring on multiple music players until I flashed back over to the Franco kernel, so I'm inclined to think it has to do with your kernel.
Keep up the good work though! I loved the performance I was getting on your kernel, seemed nice and agile
Click to expand...
Click to collapse
Good to see that someone like my kernel :victory:
I don't have 3.5mm AUX jack for test but if you give me dmesg log I can fix it faster
Awesome Kernel For LeEco Le 2
WARNING:
Code:
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this Kernel
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.
Note:
Only For Oreo Roms!!
SUPPORTED DEVICES:
LeEco Le 2 X520
LeEco Le 2 X526
LeEco Le 2 X52
INSTALLATION INSTRUCTIONS:
- Download Awesome Kernel Latest Build From The Links in Second Post
- Flash the AweSome Kernel zip File from TWRP/RWRP Recovery
- Wipe Cache (Optional)
- Reboot Enjoy
KERNEL SOURCE:
Github
Donate If You Like My Work:-
PayPal
Paytm
Number :- 9022454566
Download Link:-
Click Here To Download
XDA:DevDB Information
AweSome Kernel For Le2 [Snapdragon], Kernel for the LeEco Le 2
Contributors
ProPrk
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 1.1
Created 2018-04-03
Last Updated 2018-06-25
It'd be` nice for you to include some features of this kernel in your post...
Governors, Voltage control, KCAL suppourt... things like that. But I'll flash It and see for myself.
Edit: Maybe you undervolted it?
Can we use this for AOSP extended OREO ROM?
Tested for an hour.
No heating issue. Absolutely no heat generated by the phone. Would recommend this to all Oreo users.
BMWM5V8 said:
It'd be` nice for you to include some features of this kernel in your post...
Governors, Voltage control, KCAL suppourt... things like that. But I'll flash It and see for myself.
Edit: Maybe you undervolted it?
Click to expand...
Click to collapse
I dont add those stuff
Me kinda thinking to fix heat first so i did.
In next update u will find cool features
U can also recommended me to Add Some stuff
upendrae2 said:
Can we use this for AOSP extended OREO ROM?
Click to expand...
Click to collapse
All oreo roms
ProPrk said:
I dont add those stuff
Me kinda thinking to fix heat first so i did.
In next update u will find cool features
U can also recommended me to Add Some stuff
Click to expand...
Click to collapse
Any chance you could add support for KCAL?
ProPrk said:
I dont add those stuff
Me kinda thinking to fix heat first so i did.
In next update u will find cool features
U can also recommended me to Add Some stuff
Click to expand...
Click to collapse
I understand. I think some great features would be:
1. Voltage Controls
2. Adreno Idler driver for the GPU (more battery life)
3. Smartmax_eps Governor and dancedance Governor for even more battery life
4. KCAL suppourt for adjusting screen colour
Thanks for taking my suggestions into consideration. Much respect
Pleas add Wireguard VPN. Simple and painless addition. See the Wireguard thread 4 implementation. A couple of extra lines of build code and ur there. I'd appreciate it. TThe fastest VPN and easiest to set up. Thanks....
BMWM5V8 said:
I understand. I think some great features would be:
1. Voltage Controls
2. Adreno Idler driver for the GPU (more battery life)
3. Smartmax_eps Governor and dancedance Governor for even more battery life
4. KCAL suppourt for adjusting screen colour
Thanks for taking my suggestions into consideration. Much respect
Click to expand...
Click to collapse
Add some schedulers too... especially "Zen" scheduler which I personally think gives the best real time performance....
And if you can increase the battery performance and optimisation...
Gray90 said:
Add some schedulers too... especially "Zen" scheduler which I personally think gives the best real time performance....
And if you can increase the battery performance and optimisation...
Click to expand...
Click to collapse
Back when I was using a galaxy s4, the performance gain from using zen was really noticeable. I haven't noticed that much of a difference these days, since this phone here is a relatively modern device. But, let's see what the dev has in store for us in future updates.
Didn't work for me, my phone still heats up quicker than my toaster. Lol
When surfing the browser of the smartphone is heated.
When watching videos too.
Installed the kernel AweSome.
On stock firmware in these tasks,the smartphone cold.
BMWM5V8 said:
I understand. I think some great features would be:
1. Voltage Controls
2. Adreno Idler driver for the GPU (more battery life)
3. Smartmax_eps Governor and dancedance Governor for even more battery life
4. KCAL suppourt for adjusting screen colour
Thanks for taking my suggestions into consideration. Much respect
Click to expand...
Click to collapse
Done :v
jjo21631 said:
Pleas add Wireguard VPN. Simple and painless addition. See the Wireguard thread 4 implementation. A couple of extra lines of build code and ur there. I'd appreciate it. TThe fastest VPN and easiest to set up. Thanks....
Click to expand...
Click to collapse
DONE :V
zanishq said:
Didn't work for me, my phone still heats up quicker than my toaster. Lol
Click to expand...
Click to collapse
Use setting what i used in images
s.l.a.s.h.e.r said:
When surfing the browser of the smartphone is heated.
When watching videos too.
Installed the kernel AweSome.
On stock firmware in these tasks,the smartphone cold.
Click to expand...
Click to collapse
After flashing kernel use my settings and let it cool down first
BMWM5V8 said:
Back when I was using a galaxy s4, the performance gain from using zen was really noticeable. I haven't noticed that much of a difference these days, since this phone here is a relatively modern device. But, let's see what the dev has in store for us in future updates.
Click to expand...
Click to collapse
I actually found a non-scientific method of actual measuring the performance gains in schedulers.... What I do is download a game called vainglory from play store which is a fairly big game for Android.... So whenever I open up vainglory after the installation, the game starts to extract files... During this I just measure the time taken by the phone to complete it....I found out that ZEN was noticeably faster than CFQ,BFQ and Noop...the worst was DEADLINE...though Deadline gives a better touch response while gaming and decreases the input lag at the cost of multitasking....
Sorry for the noobness, but I don't have the scheduler or the CPU governor you are using.
ProPrk said:
Done :v
DONE :V
Use setting what i used in images
Click to expand...
Click to collapse
Thanks
oh i wanted to ask you about your FIREHOUND rom for this device. It has the problem where call audio does not go to bluetooth. So I had sent you a log of it in your PM to try and help.
---------- Post added at 06:26 AM ---------- Previous post was at 06:25 AM ----------
Gray90 said:
I actually found a non-scientific method of actual measuring the performance gains in schedulers.... What I do is download a game called vainglory from play store which is a fairly big game for Android.... So whenever I open up vainglory after the installation, the game starts to extract files... During this I just measure the time taken by the phone to complete it....I found out that ZEN was noticeably faster than CFQ,BFQ and Noop...the worst was DEADLINE...though Deadline gives a better touch response while gaming and decreases the input lag at the cost of multitasking....
Click to expand...
Click to collapse
ohhh nice. You've definitely taught me something.
zanishq said:
Sorry for the noobness, but I don't have the scheduler or the CPU governor you are using.
Click to expand...
Click to collapse
Flash 1.3 first ._.
BMWM5V8 said:
Thanks
oh i wanted to ask you about your FIREHOUND rom for this device. It has the problem where call audio does not go to bluetooth. So I had sent you a log of it in your PM to try and help.
---------- Post added at 06:26 AM ---------- Previous post was at 06:25 AM ----------
ohhh nice. You've definitely taught me something.
Click to expand...
Click to collapse
Redmi 4x also having this problem not fixed yet
Let see in future may be we got fix
TwistLoop Kernel For Redmi Note 5 Pro is a Feature Rich Kernel For Redmi Note 5 Pro.
Feature List:
[NO LONGER BEING USED] Energy Aware Scheduling with modified msm8998 energy model
HMP Upstreamed
Schedalucard, pwrutilx, electroutil, schedutil, darkutil, blu_schedutil, helix_schedutil EAS governors
Overclock upto 1.96/2.51GHz
Underclock upto 300MHz on both clusters
CPUQuiet hotplugging driver
Undervolting
GPU undervolt, Simple GPU Alogorithm, Adreno Idler, misc GPU optimization and fixes
CPU input boost driver (highly reworked)
Dynamic stune boost
Devfreq boost driver
Wakelock blocker by boeffla
KCal color control
Sound control
Vibration strength control
Disabled BCL driver
Disabled devfreq mem governors
WireGuard support
SDFat driver support
Android Linux stable merged in
What is EAS? Read Here.
Telegram Discussion Group
Download Link: Mirror 1 Mirror 2
XDA:DevDB Information
TwistLoop Kernel, Kernel for the Xiaomi Redmi Note 5 Pro
Contributors
xdatman, uvera00
Source Code: https://github.com/twistloop/android_kernel_twistloop_whyred
Kernel Special Features:
Version Information
Status: Stable
Created 2018-08-24
Last Updated 2018-10-06
Can you specify if this only works for only aosp/los or miui based roms too?
Is it for miui or custom roms or unified version?
EAS enabled kernel for SD636? What?!
Is there energy model available for SD636/660 or was it based on some other energy model?
Great stuff though
tusharjain95 said:
Can you specify if this only works for only aosp/los or miui based roms too?
Click to expand...
Click to collapse
Kapiljhajhria said:
Is it for miui or custom roms or unified version?
Click to expand...
Click to collapse
It's only for custom roms, Pie supported, MIUI not supported.
Cirra92 said:
EAS enabled kernel for SD636? What?!
Is there energy model available for SD636/660 or was it based on some other energy model?
Great stuff though
Click to expand...
Click to collapse
Exactly what I though.
alreadyregistered said:
Exactly what I though.
Click to expand...
Click to collapse
ofcourse ported
The op could give a bit more clues and info about this.
Can I flash it over any other custom kernel I have rebirth kernel 1.8 also how is the battery backup as right now I am getting approx 14 hrs of usage including
AOD
little gaming( PUBG for 1 hr )
Calling ( approx 2-4 hrs )
Youtube (5-6 hrs )
Chrome (2-3 hrs )
With WiFi always on
Also is there any possibility for GPU over clocking
As right now in rebirth CPU big cluster are at 2.46 and little clusters are at 1.8 with GPU at 430 MHz which is quite disappointing so please try to add GPU O.C
P.s sorry for my bad English ???
Flashed the Kernel. Phone feels a lot more Smooth. With PE 9.0.
I am curious about the battery Backup. Thank you for the nice Work!
d4rk1337 said:
Flashed the Kernel. Phone feels a lot more Smooth. With PE 9.0.
I am curious about the battery Backup. Thank you for the nice Work!
Click to expand...
Click to collapse
+1 it is definitely smoother, I am also on PE 9.0, so far everything looks excellent. Thank you for the work developer.
Ah... Eyegasm... :good:
EAS for our phone is great news. Thanks for this xdatman!
Cirra92 said:
EAS enabled kernel for SD636? What?!
Is there energy model available for SD636/660 or was it based on some other energy model?
Great stuff though
Click to expand...
Click to collapse
It's Ported from Kirin.
Regarding the question with Kernel Compatibility, it supports AOSP Roms as of Now.
Is it possible to support on MIUI please ?
How about spectrum? Just a click, if it gets to your to-do list. Not necessary, but handy feature to have. Quickly switching between presets.
Wow eas ?? i think it is first kernel for whyred support eas good work keep it up dev you are awesome .
Boy was really missing @joshua and @ReNDeR_broken (might be getting there names wrong) work on OP3T forums.
Great job
Tbh. Kernel is not fluid. It's laggy. Scrolling is not smooth, apps are freezing at start. EAS is not working or it needs many tweaks. Not hating. Just saying how it works for me.
Clean flashed aosip 8.1 and aosp 9.0.