I collected couple of tools i use to create stock fastboot images from Full Oxygen OS zips and i am sharing them here in case you want to create fastboot images your self.
ZIp contains the ADB , Fastboot files and flashall bat file to help you in flashing the images in fastboot mode. ( Ensure you always use up to date ADB , fastboot versions)
Steps :
Download and unzip Fastboot image maker zip file.
Download and unzip Full Oxygen OS zip file from Oneplus to "payload_input" folder (Located inside the unzipped Fastboot Image maker Zip)
Run the Runme bat file
After the tool runs you will have all the .img files in the "payload_output" folder
Copy all the .img files back to the unzipped Fastboot Image maker folder , reboot to fastboot mode (Volume up + power) , connect the phone to your computer and run flashall bat file ( "Invalid sparce file format at header magic" is not an error, please ignore it)
Note : Ensure USB drivers for your phone is already installed on the computer before running the flashall batch file.
Related
if i want to flash boot.img but its inside the zip folder and inside other folders, how do i do it? i tried to use twrp and flash but it flash the zip only, i want to know how to flash files inside a zip folder or someone told me u can flash using boot loader and i don't know how to do it
Extract the boot.img file on your PC from the zip you have in a fastboot folder on your c drive. Connect your phone to the PC with USB debugging on. Go into the bootloader. Chose fastboot. Now from cmd prompt in windows type 'fastboot flash boot boot.img'. That should do it.
Sent from my HTC One S using Tapatalk
I flashed Philz recovery and I want to change back to TWRP 3.1, but Philz will only recognize zip files and not img files. How do I get a zip version of TWRP or how do I flash the img file? I also cannot get Philz to mount to my PC, and a lot of things are crashing on my current rom so I can't install any apps.
Download adb and fastboot. and also mfastboot, extract everything to single folder
download twrp .img from https://dl.twrp.me/falcon/ and copy .img to adb folder
On your device, go into Settings -> About and find the Build Number and tap on it 7 times to enable developer settings. Press back and go into Developer Options and enable USB debugging. From your computer, open a command prompt and type:
adb reboot bootloader
You should now be in fastboot mode.
Download the correct image file and copy the file into the same folder as your adb and fastboot binaries. Rename the image to twrp.img and type:
mfastboot flash recovery twrp.img (you may get partition mismatch error but neglect it and reboot to recovery)
and reboot to recovery thats all
More info https://twrp.me/motorola/motorolamotog2013.html
You can follow my tutorial here : https://forum.xda-developers.com/moto-g/help/guide-tutorial-motorola-moto-g-4g-to-t3516234
Enjoy
I want a custom rom and how to root guide for panasonic tab 8 hd. There's an option to unlock bootloader in system settings. So it's easy to unlock it. I think I need to have microG as I have to use Whatsapp for my classes. I can provide you with the details of the device if required.
1. Activate USB debugging
2. Backup all your data.
3. Pull your boot.img and Vemata and save them in your external sdcard.
4. Install Magisk 22.1apk
5. Open it from home page and install the app.
6 now touch Magisk and chose force encryption.and enter
7. In popup dialogue tick selctand patch file and enter
8. Now chose the boot.img file you saved in the external sd card. Now the magisk will process it put the file in your internal sdcard in the download section.
9. Now save the magisk processed boot.ing on your desktop or in any folder and remember the location. It is advisable rename that with 2or 3 letters and paste it in th9/e ADB folder where you have installed the Platform files.
10. Now you open platform folder and open cmd inside the Platform tool. In the ensuing cmd window check for
adb devices.
Your device I'd will come to the next line. Then type
adb reboot bootloader
Now check
fastboot devices
your phone I'd will pop up.
Unlock bootloader:
Type fastboot flashing unlock
then click volume up bottom over.
Not you come again till the step 10.
Rooting process:
Now type
fastboot flash boot " the magisk processed, boot.img which you have renamed.
Now the patched boot.img will relace stock boot.img
Again come back and type
fast boot "-- disable-verification flash vbmeta " put your vbmeta file that earlier you have saved in the Platform folder.
that is all it is rooted.
please note that before starting the root activities you have to unlock your boot loader.
On your own you are doing. I take no responsibility.
by this process only I have rooted the phone. And with WWR MTK Tool and SPFT I have managed to get the stock firmware files. With native preloader. But flashing with this preloader needed patched boot.img file
Hello, i want to reactivate my old acer A701 by flashing a newer img or zip.I have the following problems.When I try to do the recovery with a zip file on an sdcard i get the prop error.When i try to flash it by an img i always get i haven set the ANDROID_PRODUCT_OUT even when I do an export ANDROID_PRODUCT_OUT=/home/leopold/platform-tools.
A printenv shows the ANDROID_Product_OUT and the img is in platform-tools.
What is going wrong, what can i do?
You either apply Flash zip from sd from within Android's Recovery menu or you use external ADB Sideload command to flash a properly signed ZIP-file what contains the ROM, or you use external Fastboot Flash command to flash an IMG-file what requires device's bootloader is unlocked.
Hello and thank you,
like i wrote above, i want to flash it.Now i found at another place i have to write:
sudo ANDROID_PRODUCT_OUT="./" fastboot flashall recovery Az.img
when i do that, the flash is starting but then i get the error android-info.txt is missing.
So i guess i have a wrong image.
Does anybody have an image for the A701 with a newer android version.Or can give me a link.
My 4.1.1 does not recognice newer apps.
leopold
Take note that
Code:
fastboot flashall <ROM.IMG>
is to be used to flash a complete ROM, whereas
Code:
fastboot flash recovery <RECOVERY.IMG>
is to be used to flash only a Recovery.
Ok, i understand but i m lost.
I have some imagees and some zip files what should work on my a701.
If I use fastboot with img, i get no android-txt found.
if I work with adb reboot recovery and the zip files I will allways get the partition error prop undefined.
Can I supress the search for the android -txt?
What else can I do?
one of the zip files is from here https://acer.shreps.fr/, it is the said stable kitkat.
If you have access to a Windows computer then make use of a Flash Tool what's suitable to the tablet.
Unfortunately i can not find a flashtool for the nividia tegra3.
I have some zip files what should work on the a701 but all have the error check partition size [-Prop_UNDEFINED-) then the installation will be aborted.
Is there a way to eliminate the partition check.
Or does somebody have a zip or an img with a working update or recovery for a recent Android working on the a701?
Start by downloading the official stock rom. If you had a problem with the installation or just want to go back to the original usage
Flash SP Tools
- download the latest version of Android sdk platform-tools
- Put in the platform-tools folder your boot.img and vbmeta.img that you have copied from your previously downloaded official rom.
- Then download the generic system image you want to install, put it in the platform-tools folder and rename it GSI.img
- Put your smartphone in developer mode, in the settings press 7 times on the build number
- In the menu Options for developers that appeared, you must enable OEM unlocking, enable USB debugging
- Connect the smartphone to the computer, in Configuration usb choose Connection sharing via usb
accept the requested authorization on your smartphone,
- In the platform-tools folder enter the command
adb reboot bootloader
fastboot flashing unlock Press VOL+ to confirm
fastboot flashing unlock_critical Press VOL+ to confirm
fastboot --disable-verification flash boot boot.img
fastboot --disable-verify flash vbmeta vbmeta.img
fastboot -w
fastboot reboot fastboot The tel switch to FastbootD mode and wait for a moment before entering the following command
fastboot delete system
fastboot delete-logical-partition product_a
fastboot --disable-verity --disable-verification system flash Gsi.img Wait for a moment
fastboot -w
fastboot bootloader
fastboot delete user data
fastboot reboot
Lenovo then logo rom gsi and install
evolutionx rom
Releases ยท ponces/treble_build_evo
Script and patches for building PHH-Treble Evolution X - ponces/treble_build_evo
github.com
rom lenovo and flashtool 616f
https://mirrors.lolinet.com/firmware/lenovo/Tab_P11_Plus/TB-J616F/TB-J616F_S240155_230210_ROW_SVC.zip
https://mirrors.lolinet.com/firmware/lenovo/Tab_P11_Plus/flashtool/MTK_Flash_Tool_v5.2104_P522.zip
Last tested rom that works
https://private.projectelixiros.com/thirteen/gsi/ProjectElixir_3.6_gsi-13.0-20230223-1108-OFFICIAL.img.xz
Root lenovo 616f
Install the Magisk app to your phone and install
In the Options menu, enable both the Preserve Force Encryption and Recovery Mode options.
Choose Select and Patch a file.
Browse to the extracted boot.img file and select it.
Magisk will now load the boot.img file and start patching.
Then the patched patched boot image file will be saved as magisk_patched.img in Internal Storage Downloads.
The file will be named as magisk_patched.img.
Transfer the magisk_patched.img file to the platform-tools folder.In the platform-tools folder enter the command
adb reboot bootloader
fastboot flash boot magisk_patched.img
fastboot reboot
successfully rooted
Magisk 25.2
https://github.com/topjohnwu/Magisk/releases/download/v25.2/Magisk-v25.2.apk
Can you make a video to review that rom on p11
It has only one flaw,
The PC does not recognize the tablet, it can only be charged, files cannot be transferred and adb does not work either.