Database Info

TouchWiz Rom For Gionee Gpad G2

TouchWiz ROm
Android Version : 4.3
Rom Features: Note 3
Copyrights: DevSkilled
Bug Fixed By : Marian Trinca
First developed For Lenovo A820
Compatible Devices : Walton Primo N1/ Gionee Gpad G2/ Allview P5 Qmax/ GN810
My Review
Trust me this Version is Better than older ones
Requirements
1.Rooted Compatible Device
2.Custom Recovery (T.W.R.P)
3.Download Files
Root Your device by Using Framaroot
Flash TWRP
Installation
*Please Keep A backup of your present Rom
1.Download Touchwiz Essentials.zip From Download Section and extract it
a) Place Viper4Android Folder in root od SD
b) Open Readme.txt for the Touchwiz Rom Download Link.
c) Download
2.Place the zip To root of Your SD Card
3.Reboot Into TWRP Recovery.
4.Go to Wipe >Advance Wipe> mark Davik Cache, Cache, Android Secure, System>Swipe to wipe.
5.Again Reboot Into Recovery.
6.Go To Wipe > Swipe To Factory Reset
7.Reboot Into Recovery.
9.Install>TouchwizRoM.zip
10.Follow Screen
11.When Finished Do WIPE CACHE,DALVIK CACHE
12.Reboot System
13. Now it take around 3min to boot Complete All steps.
14. Then You will See Welcome Screen, Keep Going On Finally You Will See Congratulations Screen
15.Now open Viper4Android Fx App , Select Top Left Key(Menu key)> Then Select Load Profile>Xperia Bass>Headset.
16.Reboot Phone
17.Done Now Enjoy
N.B Back up your Current ROM please before Flashing And Camera Flash Is not Available In This Rom
XDA:DevDB Information
TouchWiz Rom-Gionee Gpad G2, ROM for all devices (see above for details)
Contributors
DevSkilled
ROM OS Version: 4.3.x Jellybean
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Gionee Gpad G2 Device/Similar Rebrand
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: 4.3
Stable Release Date: 2014-07-04
Current Beta Version: 4.2.x
Beta Release Date: 2014-07-01
Created 2014-07-04
Last Updated 2014-07-05

1.5mb custom rom?
DevSkilled said:
TouchWiz ROm
Android Version : 4.3
Rom Features: Note 3
Copyrights: DevSkilled
Bug Fixed By : Marian Trinca
First developed For Lenovo A820
Compatible Devices : Walton Primo N1/ Gionee Gpad G2/ Allview P5 Qmax/ GN810
My Review
Trust me this Version is Better than older ones
Requirements
1.Rooted Compatible Device
2.Custom Recovery (T.W.R.P)
3.Download Files
Root Your device by Using Framaroot
Flash TWRP
Installation
*Please Keep A backup of your present Rom
1.Download Touchwiz Essentials.zip From Download Section and extract it
a) Place Viper4Android Folder in root od SD
b) Open Readme.txt for the Touchwiz Rom Download Link.
c) Download
2.Place the zip To root of Your SD Card
3.Reboot Into TWRP Recovery.
4.Go to Wipe >Advance Wipe> mark Davik Cache, Cache, Android Secure, System>Swipe to wipe.
5.Again Reboot Into Recovery.
6.Go To Wipe > Swipe To Factory Reset
7.Reboot Into Recovery.
9.Install>TouchwizRoM.zip
10.Follow Screen
11.When Finished Do WIPE CACHE,DALVIK CACHE
12.Reboot System
13. Now it take around 3min to boot Complete All steps.
14. Then You will See Welcome Screen, Keep Going On Finally You Will See Congratulations Screen
15.Now open Viper4Android Fx App , Select Top Left Key(Menu key)> Then Select Load Profile>Xperia Bass>Headset.
16.Reboot Phone
17.Done Now Enjoy
N.B Back up your Current ROM please before Flashing And Camera Flash Is not Available In This Rom
XDA:DevDB Information
TouchWiz Rom-Gionee Gpad G2, ROM for all devices (see above for details)
Contributors
DevSkilled
ROM OS Version: 4.3.x Jellybean
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Gionee Gpad G2 Device/Similar Rebrand
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: 4.3
Stable Release Date: 2014-07-04
Current Beta Version: 4.2.x
Beta Release Date: 2014-07-01
Created 2014-07-04
Last Updated 2014-07-05
Click to expand...
Click to collapse
?I already have a viper4androidfx on my fone, do I download another?
You also promised a kitkat for this device
Camera Flash not available? You mean camera is not working?
What bugs did you notice on the rom

That is not Rom Zip
haykay2005 said:
?I already have a viper4androidfx on my fone, do I download another?
You also promised a kitkat for this device
Camera Flash not available? You mean camera is not working?
What bugs did you notice on the rom
Click to expand...
Click to collapse
Please Read : 1. a/b
Extract zip and open readme , you will find download link there.
And Kitkat Doge mod will be upoad tomorroe
Kitkat Pure Xperia IS ready And will be published Today

This rom is very beautiful and smooth. But front camera not working. Please make a fix patch...

Same problem is front camera not work with flash problem fix this
And
map
local
Not work
Unfortunately stopped app solve please
But thanks provide DevSkilledBug Fixed By : Marian Trinca new rom service 4 gionee

Fix please... Thank you very much !!!
https://www.youtube.com/watch?v=18PTh14Layc

Bluboo Xfire Custom Rooted rom (Stock based)

Disclaimer: I am not responsable of problems derivate of using the rom, I use myself, it worked great, and I shared it.
Hi, im posting here, a modified ROM by me based on the stock one, for the Bluboo Xfire, without almost any programs more than basic ones, and prerooted with SuperSU, and a fix of the Calendar Sync that isnt enabled in stock! And two estethic things: Doesnt have Bluboo power on sound, and bootanimation is from CM12
For flash it, google has a lot of videos (Or you can see the official rom instructions), but is simple, mtk (Mt6735) install drivers (Google it) (Check that are properly installed trying to boot in flash mode), uncompress the file, open SPFlash Tools with administrador, load scatter-file in the rom folder, disconnect battery, plug in usb in the computer, press download, and connect battery and wait.
It has to be flashed by SPFlash Tools (Included in the .zip) , because this phone hasnt have recovery yet.
The files are here: http://www.needrom.com/download/bluboo-xfire-custom-rooted/
Download and flash it
XDA:DevDB Information
Bluboo Xfire Custom Rooted ROM, ROM for the Android General
Contributors
kprkpr
Source Code: http://www.needrom.com/download/bluboo-xfire/
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Bluboo Xfire
Version Information
Status: Stable
Current Stable Version: 2
Stable Release Date: 2015-11-26
Created 2015-11-26
Last Updated 2015-11-26

CUSTOM RECOVERY Carliv Touch CWM
BluBoo XFire Carliv Touch CWM recovery 6 v3.3
Android 5.1 5.0 inch IPS Screen 4G MTK6735M 64bit Quad Core 1GB RAM 8GB ROM
See: http://forum.xda-developers.com/showpost.php?p=64158985&postcount=27

The development of the mate 7 AOSP android 6

I am still working on the thread
After the development of the AOSP for the mate 7 hit the wall I made this thread to gather the developers efforts to make this dream come to life
What we have here is a astock rom for the mate 7 all that it need is some rebooting or crashing bugs only lefted all we need is agood devoleper or two and some time for them and it can be completed
I stepped the first step to learn development but not even a close to give help
Any one can ask for help from a developer or can fix some bugs will be a great help
We have 4 places or more to ask for developers help in
Xda site and Huawei club site in both Huawei mate 7 and honor 6 section
The original thread link is down below
https://forum.xda-developers.com/mate-7/orig-development/rom-aosp-ascend-mate7-t3465656
Introduction
This project was done by gabry3795, acbka and the TheLolageMann
Source Code: https://github.com/mt7-dev/
Please note that it's a beta release and it's not intended for daily use because some important part is not working and it's unstable. So flash only if you want to test and contribute to this project.
Images
You can find images of the first build here and for current builds under the Screenshot Tab.​
Installation Instruction
obviously your bootloader must be unlocked
Extract the .7z archive
Update your stock Huawei firmware to the latest version B571 - Android 6.0
Flash a custom recovery, I suggest you this twrp
Do a Factory Reset from recovery: Wipe » Swipe for Factory Reset
Boot in bootloader mode - Plug USB cable to your pc, hold Volume Down and Power button pressed. When a blank screen appears release them
From pc, by using fastboot, flash boot and system images
Code:
fastboot flash boot boot.img
fastboot flash system system.img
Reboot!
The easiest way to flash via fastboot is to
1- put the two files system and boot in any folder in your pc
2- when you are in the folder click on shift from the keyboard and while holding it right click anywhere
3- chose " open command Window here"
4- write "fastboot" and click inter
5- if you can see your device in the list you can flash the rom now by writing the two codes up one by one
6- after you finish you can start your PHONE now
Changelog
You can find changelogs here on github, every file will be named as the version released with many informations about the release.​
Downloads
Again the release section of github repo. for MT7-L09 , it works on MT7-TI10 BUT with more crashes and worked with honor 6 after some prop editing to the cpu clock speed
MT7-L09 and MT7-TL10
Releases page, direct links below:
[2016/09/20] v0.1.0beta - Changelog | Download
[2016/10/05] v0.2.0beta - Changelog | Download
[2016/10/05] v0.2.2beta - Changelog | Download
V 0.2.2 is the latest with the GBs fix by TheLolageMann
Note for this version: After installing GApps you have to enable all permissions to them by going to Settings -> Apps -> Select Gapps and Google Play Services -> Permissions -> Enable all permissions.
XDA:DevDB Information
AOSPfortheMate7, ROM for the Huawei Ascend Mate 7
Contributors
gabry3795, acbka And TheLolageMann
Source Code: https://github.com/mt7-dev/
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
Based On: AOSP
Version Information
Status: Beta
Current Beta Version: v0.2.2
Beta Release Date: 2016-09-20
Created 2016-09-20
Last Updated 12-02-2017

mhmedahmed1996 said:
I am still working on the thread
After the development of the AOSP for the mate 7 hit the wall I made this thread to gather the developers efforts to make this dream come to life
What we have here is a astock rom for the mate 7 all that it need is some rebooting or crashing bugs only lefted all we need is agood devoleper or two and some time for them and it can be completed
I stepped the first step to learn development but not even a close to give help
The original thread link is down below
https://forum.xda-developers.com/mate-7/orig-development/rom-aosp-ascend-mate7-t3465656
Introduction
This project was done by gabry3795, acbka and the TheLolageMann
Source Code:https://github.com/mt7-dev/
Please note that it's a beta release and it's not intended for daily use because some important part is not working and it's unstable. So flash only if you want to test and contribute to this project.
Images
You can find images of the first build here and for current builds under the Screenshot Tab.
Installation Instruction
obviously your bootloader must be unlocked
Extract the .7z archive
Update your stock Huawei firmware to the latest version B571 - Android 6.0
Flash a custom recovery, I suggest you this twrp
Do a Factory Reset from recovery: Wipe » Swipe for Factory Reset
Boot in bootloader mode - Plug USB cable to your pc, hold Volume Down and Power button pressed. When a blank screen appears release them
From pc, by using fastboot, flash boot and system images
Reboot!
The easiest way to flash via fastboot is to
1- put the two files system and boot in any folder in your pc
2- when you are in the folder click on shift from the keyboard and while holding it right click anywhere
3- chose " open command Window here"
4- write "fastboot" and click inter
5- if you can see your device in the list you can flash the rom now by writing the two codes up one by one
6- after you finish you can start your PHONE now
Changelog
You can find changelogs here on github, every file will be named as the version released with many informations about the release.
Downloads
Again the release section of github repo. for MT7-L09 , it works on MT7-TI10 BUT with more crashes and worked with honor 6 after some prop editing to the cpu clock speed
MT7-L09 and MT7-TL10
Releases page, direct links below:
[2016/09/20] v0.1.0beta - Changelog | Download
[2016/10/05] v0.2.0beta - Changelog | Download
[2016/10/05] v0.2.2beta - Changelog | Download
V 0.2.2 is the latest with the GBs fix by TheLolageMann
Note for this version: After installing GApps you have to enable all permissions to them by going to Settings -> Apps -> Select Gapps and Google Play Services -> Permissions -> Enable all permissions.
XDA:DevDB Information
AOSPfortheMate7, ROM for the Huawei Ascend Mate 7
Contributors
gabry3795, acbka And TheLolageMann
Source Code:https://github.com/mt7-dev/
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
Based On: AOSP
Version Information
Status: Beta
Current Beta Version: v0.2.2
Beta Release Date: 2016-09-20
Created 2016-09-20
Last Updated 12-02-2017
Click to expand...
Click to collapse
Thanks :good::good::good:

fazi2015 said:
Thanks :good::good::good:
Click to expand...
Click to collapse
Any one have any news about it can write it here
We can update the post with every news

Would it be possible for me to get a bug list for the current status of the project. Although I don't have the device I can definitely see if I could take a look at it. No promises though

There's still a way to get AOSP to the mate 7.
Last resort: Find a dev and pay him. On reddit r/android you could find devs. Perhaps if everybidy whos interested pays a minor fee, the dev is willing to help us.
https://www.reddit.com/r/Android/comments/69o2t8/huawei_mate_7_aosp_devs_wanted/
---------- Post added at 11:19 PM ---------- Previous post was at 11:12 PM ----------
WildfireDEV said:
Would it be possible for me to get a bug list for the current status of the project. Although I don't have the device I can definitely see if I could take a look at it. No promises though
Click to expand...
Click to collapse
First of all, thanks.
Second, There's a document on github which mentions bugs and you can find people mentioning bugs in the old thread: https://forum.xda-developers.com/mate-7/orig-development/rom-aosp-ascend-mate7-t3465656/page22

---

cm_13 for vibe x2 with any issues

HELLO EVERYONE TODAY:laugh:
I'm anoncement a new rom for only lenovo vibe x2 eu model because of i don't have the other model
but i describe how to use on other models
bug :
there is no bug i think but report if u can see bug report me
this rom base on namelessxxv and bugs same as with his rom
now lets start to describe how to use this rom on other
EU USERS ONLY DO 4-5 LİNE TO FLASH I'M ADD Fımware already for only EU users
1: u have to install your bugless stock rom
2: now mount system
3: open file manager go to system/etc/firmware copy firmware folder to your sd card
4: flash this rom using twrp just like other roms
5:flash the gapps
HTML:
http://opengapps.org/
from here
6:mount system again
6: open fle manager retry and and go to system/etc/firmware delete firmware file
7: after go to sdcard open your copied firmware file copy this again to sytem/etc
if this method work report me if you like my work press thanks button
thanks xpirt to for awesome dat unpack program
thanks assayed to for awesome for rom packer
HTML:
https://.xda-developers.com/chef-central//best--roms-editor-assayyedkitchen-t3410545
HTML:
https://github.com/xpirt/sdat2img
XDA:DevDB Information
cm_13 for vibe x2, ROM for all devices (see above for details)
Contributors
Emirhan taze, namelessxxv, xprit, assayed
ROM OS Version: 6.0.x Marshmallow
Version Information
Status: Testing
Created 2017-08-31
Last Updated 2017-08-31

[RECOVERY][ALL VARIANTS] TWRP 3.3.1-0 Touch Recovery

[URL=http://www.directupload.net]
[/URL]
​Team Win Recovery Project (TWRP) is an open-source software custom recovery image for Android-based devices. It provides a touchscreen-enabled interface that allows users to install third-party firmware and back up the current system, functions often unsupported by stock recovery images. It is, therefore, often installed when rooting Android devices, although it isn't dependent on a device being rooted to be installed.​
​treltexx (N910C/H) : Download
trhpltexx (N910U) : Download
trelteskt (N910S/L/K) : Download
tbelteskt (N915S/L/K) : Download
tre3calteskt (N916S/L/K) : Download​
​There are three ways [and possibly some more] to flash TWRP​1. Flash the .tar file using Odin​2. Extract the .tar and flash "recovery.img" using an existing TWRP installation [flash the file to recovery partition]​3. Flash the extracted "recovery.img" using either Flashify or TWRP Official App​
XDA:DevDB Information
[RECOVERY][UNOFFICIAL][N910C/H] TWRP 3.2.3-0 Touch Recovery, Tool/Utility for the Samsung Galaxy Note 4
Contributors
DahakePL, ananjaser1211
Source Code: https://github.com/omnirom/android_bootable_recovery/
Version Information
Status: Stable
Current Stable Version: 3.3.1-0
Stable Release Date: 2019-06-11
Created 2018-08-31
Last Updated 2019-06-10

CHANGELOG
3.2.3-0
❑ Initial release for N910 C / H / U and S / L / K
❑ Updated device source [ Huge thanks to @ananjaser1211 ]
❑ Fixed mount /system bug [ Also thanks to anan ]
❑ Initial release for N915 S / L / K
❑ Initial release for N916 S / L / K
❑ All variants of Note 4 supported as well as N915SLK Note Edge
Changelog TWRP 3.3.1-0
❑ Reworked device tree
❑ Removed broken F2FS
❑ Updated kernel
❑ Unified code names to skt
❑ Fixed N910L/K code-name issue
treltexx (N910C/H) : Download
trhpltexx (N910U) : Download
trelteskt (N910S/L/K) : Download
tbelteskt (N915S/L/K) : Download
tre3calteskt (N916S/L/K) : Download

Awesome work Adam :good: keep it up

Wow, thank you so much

Good job but I still need beta2 room

Thanks Adam Great Work :highfive:

Thanks sir. This is requirement recovery for 8.0. I hope bote 4 still alive. Good job and wish your day happily

thanx nice work!

nice work, i was waiting for a TWRP update for treltexx, flashing now, thx

What's the difference between 3.2.1.1 and 3.2.3.0 ?

Trex888 said:
What's the difference between 3.2.1.1 and 3.2.3.0 ?
Click to expand...
Click to collapse
More improvement and fix bug

Hey Adam - nice update! Flashed the .img thru TWRP - all good. Thank you!

DahakePL said:
http://www.directupload.net
ABOUT
Team Win Recovery Project (TWRP) is an open-source software custom recovery image for Android-based devices. It provides a touchscreen-enabled interface that allows users to install third-party firmware and back up the current system, functions often unsupported by stock recovery images. It is, therefore, often installed when rooting Android devices, although it isn't dependent on a device being rooted to be installed.
DOWNLOAD
MEGA - https://mega.nz/#!oM1GDSyA!PWh413Ws4vPPptiSnEg7ZR38irQNpQJ8EhcU7FAOqNo
GOOGLE DRIVE - https://drive.google.com/open?id=1bnEGxVNAR7EBfOdHiKDr1miZrbWLlw-y
HOW TO INSTALL
Flash the .tar file using Odin or extract the .tar and flash "recovery.img" using an existing TWRP installation [flash the file to recovery partition]
XDA:DevDB Information
[RECOVERY][UNOFFICIAL][N910C/H] TWRP 3.2.3-0 Touch Recovery, Tool/Utility for the Samsung Galaxy Note 4
Contributors
DahakePL, ananjaser1211
Source Code:https://github.com/omnirom/android_bootable_recovery/
Version Information
Status: Stable
Current Stable Version: 3.2.3-0
Created 2018-08-31
Last Updated 2018-08-31
Click to expand...
Click to collapse
How to extract .tar to recovery.img plz

youur said:
How to extract .tar to recovery.img plz
Click to expand...
Click to collapse
Try WinZip

Great work. Much respect

youur said:
How to extract .tar to recovery.img plz
Click to expand...
Click to collapse
With solid explorer you can do it.... Of you are using that file manager!

youur said:
How to extract .tar to recovery.img plz
Click to expand...
Click to collapse
Root Explorer worked for me.

Thanks for your effort and much respect.
Correct me if i am wrong but I have noticed there is no efs partition backup option in backup menu.
How to backup efs partition ?

Trex888 said:
Thanks for your effort and much respect.
Correct me if i am wrong but I have noticed there is no efs partition backup option in backup menu.
How to backup efs partition ?
Click to expand...
Click to collapse
Just scrolling up & down the screen and you will see all backup options.
The same works for other menus to.

gele777 said:
Just scrolling up & down the screen and you will see all backup options.
The same works for other menus to.
Click to expand...
Click to collapse
Thanks