Related
Hello Guys
CoolUI 8.0 based on Marshmallow For Coolpad Note 3 Lite
==========Features=========
*VOLTE
*CoolManager
*User Interference Changed
*Notification Drawer now is below
*Improved the Battery Life
Fixed Issues in Version 10:-
Charging Take 3 hours To Full Charge For Me
Fingerprint Response Little Bits Improve
Memo fixed
Recorder fixed
MALWARE PROBLEM SOLVED
Folder Rename Font Now Visable
Display Improved
VOLTE supported
Front Camera turns blank occasionally.
Cool Manager App Hang.
Loud Speaker is much improved.
Fingerprint response time.
Hanging and Lagging
Camera Effects
Multi-Tasking added
Fingerprint to capture fixed
Loudspeaker problem fixed
Known Issues:
Charging is slow
Discharging is quick when battery is less than 15(Our Kernel issue)
DOWNLOADS:-
SP Flash Tool Flashable :-
( just load the Scatter File , click Download & Switch Device and connect to PC )
V10 - SP Flashable CoolUI 8
Custom Recovery Flashable(Rooted):-
V4 - TWRP Flashable - CoolUI 8
SuperSU-systemless ( Root ):-
https://mega.nz/#!dpogBIiK!hCv4Oaji9K1Kh8JvhE5cZFy1BonRO4HCMm3e8hpvksY
==>How to update to V10 through TWRP Recovery??
If you are on Lollipop flash coolUI8 V4 through TWRP.
You must be on CoolUi MM for example V4 to do this
Download SP Flashable Version 10 of CoolUI 8
Extract it
You only need System.img and Boot.img
Now, Boot to TWRP
Install, Locate where you extracted System.img and Boot.img
Click on Install Image
Now select System.img > select System Partition.
Now Select Boot.img > select boot partition
Done.
Now main thing flash SuperSU-systemless zip
Reboot to System.
Q2)How to Unroot CoolUI 8??
A2)Just do a Factory Reset and now Root is gone.
Q3)How to make it Factory Software if i have TWRP and it is rooted??
A3) Factory Reset to unroot and Flash Stock Recovery and again do a Factory Reset.
Fix Charging , Power / Volume button issues :
https://forum.xda-developers.com/an...une-button-t3600688/post72145424#post72145424
Credits:-
Team Innovative (For TWRP flashable)
Coolpad
@kubersharma
Source:-
http://www.coolpadforums.com/forum.php?mod=viewthread&tid=5531&extra=page=1&mobile=2
http://www.coolpadforums.com/forum.php?mod=viewthread&tid=12702&extra=page=1&mobile=2
Thank YOU.
Do hit the Thanks Button
Screenshots CoolUI 8 Marshmallow
Can I Flash it in Coolpad note 3 instead of note 3 lite?.
thegodhimself-sukumar said:
Can I Flash it in Coolpad note 3 instead of note 3 lite?.
Click to expand...
Click to collapse
Nope
in coolpad note 5 when i video call receiver could not see me insted they get green blocked screen but i can see them .HOW TO SOLVE THE PROBLEM PLZ HELP ME. i think the update stock ROM reason for it. now i have using coolui8.0 v031
VoLte not working
I installed this Rom expecting to get volte but I am unable to make calls through my Jio sim. Please can u provide some help
Chirag CM said:
I installed this Rom expecting to get volte but I am unable to make calls through my Jio sim. Please can u provide some help
Click to expand...
Click to collapse
Please flash V10 for VoLTE
kuberrocks96 said:
Please flash V10 for VoLTE
Click to expand...
Click to collapse
Is coolpad have an feature captured video when someone tried to unlocked our phone?
I am not able to install system and boot images of v10. I was successfully upgraded to marshmallow v4. But whenever I am trying to install image files specifically, I am getting invalid file or file does not exist error. Please suggest.
Super-SU Systemless Zip not working! Any other link for the same?
Guys I recently bricked my phone and I flashed an older version(build no says v002).
After flashing via spflash the phone did came back to life but when power off or reboot,
very often it gets stuck in boot loop to recovery mode only(but when in recovery mode, there's no recovery there's busted Android symbol with a exclamation mark).
What I wanted to know is if I flash this rom via spflash will there be issue of the phone booting into recovery and possibly fix the no busted Android issue?
And does vote work well with this rom?
And spflashable says v10 but tarp says v4
Where is download link for rom
I recently flashed this ROM with SP tool, after boot I'm facing a problem: location app asking for permission, therefore, i provided all permission but still the app pop every time and ask for permissions. Please help!
I installed it in clpdn3 lite everything is working smoothly. Suddenly the speaker and earphone jack stopped working. Please help. How to solve this?
Thejas tj said:
Guys I recently bricked my phone and I flashed an older version(build no says v002).
After flashing via spflash the phone did came back to life but when power off or reboot,
very often it gets stuck in boot loop to recovery mode only(but when in recovery mode, there's no recovery there's busted Android symbol with a exclamation mark).
What I wanted to know is if I flash this rom via spflash will there be issue of the phone booting into recovery and possibly fix the no busted Android issue?
And does vote work well with this rom?
And spflashable says v10 but tarp says v4
Click to expand...
Click to collapse
Yes, VoLTE works.
Please flash V10 via SP Tool
$Jarial said:
I recently flashed this ROM with SP tool, after boot I'm facing a problem: location app asking for permission, therefore, i provided all permission but still the app pop every time and ask for permissions. Please help!
Click to expand...
Click to collapse
FLASH V10 VIA SP FLASH TOOL
vedraj1012$ said:
I installed it in clpdn3 lite everything is working smoothly. Suddenly the speaker and earphone jack stopped working. Please help. How to solve this?
Click to expand...
Click to collapse
FLASH V10 VIA SP TOOL
Battery
When the phone gets lock it directly entered to super power saving mode. It loses more of the power
Flashing interrupted due to Error 7.
I got an issue of Error 7 while flashing Stock mm v04 from Twrp. I've tried the suggested method of erasing "Asserts" by editing Updater through notepad++ but i didnt really see any asserts lines in this file. So what do i do? Or is there any way i can flash MM v10 without flashing v04 first? I need some urgent help my phone aint working.
P.S: I've flashed Mados before this as i didnt know we have to flash stock MM before flashing naugat. Is there any chance i got this problem cause of this?
KiLLeR_PvK said:
I got an issue of Error 7 while flashing Stock mm v04 from Twrp. I've tried the suggested method of erasing "Asserts" by editing Updater through notepad++ but i didnt really see any asserts lines in this file. So what do i do? Or is there any way i can flash MM v10 without flashing v04 first? I need some urgent help my phone aint working.
P.S: I've flashed Mados before this as i didnt know we have to flash stock MM before flashing naugat. Is there any chance i got this problem cause of this?
Click to expand...
Click to collapse
MAD TWRP doesn't support to flash any other roms.
Use this : https://androidfilehost.com/?fid=745425885120733720 ( it is 3.1.0-1 )
3.1.0 has old mount points - for old roms
3.1.1 has new mount points - for new roms
Also, AFH is little slow to generate mirrors - wait for it.
With regards
Kubersharma
Thanks!
kubersharma said:
MAD TWRP doesn't support to flash any other roms.
Use this : https://androidfilehost.com/?fid=745425885120733720 ( it is 3.1.0-1 )
3.1.0 has old mount points - for old roms
3.1.1 has new mount points - for new roms
Also, AFH is little slow to generate mirrors - wait for it.
With regards
Kubersharma
Click to expand...
Click to collapse
Thank you for the response! This link has worked and everything is set up now.
so is this project abandoned? any clues of further development?
Original ROMs provided by UMI
-----------
Table of contents:
- How to flash Original ROM and restore to factory settings
- Download Original ROMs
-----------
How to flash Original ROM
- For flashing a original ROM you will need driver and SP Flash tool
- Unzip the ROM and select in SP Flash tool the Scatter file
- Press download button
- Turn your phone off
- Plug USB to computer
Original ROM
2017 03 17 uploadingZ
2017 02 25 Download via MEGA.NZ
2017 02 13 Download via MEGA.NZ
2017 01 16 Download via MEGA.NZ
2017 01 06 Download via MEGA.NZ
Code:
Changelog:
2017 02 25
1. GPS optimization
2. Camera optimization
3. UMIDigi boot logo
2017 02 13
1. add "double tap" wake up screen funtion
2. battery life optimized (fixed the battery drain problem)
3. fix problem of Gyroscope issue
4. camera optimized
5. finger print issue fixed
6. optimized screen touch sensitive
Attention: Due to the fact that my Z felt down and the screen is totally broken, I decided to change phone. If I should updat this thread, please send me a private message.
hi
what is the decrypt key for MEGA download ?
Tks
lvdb said:
hi
what is the decrypt key for MEGA download ?
Tks
Click to expand...
Click to collapse
Sorry for any inconveniences. It should work now!
When will 7.0 be available please?
raylogic said:
When will 7.0 be available please?
Click to expand...
Click to collapse
https://forum.xda-developers.com/umi-z/how-to/android-7-nougat-umi-z-t3554009
philipped346 said:
https://forum.xda-developers.com/umi-z/how-to/android-7-nougat-umi-z-t3554009
Click to expand...
Click to collapse
O dear thanks. R.
Since Feb 13th there's a new UMI Z ROM Update!
UMI Z.V3.01_20170213
According to the Umidigi Forum following should have changed:
- Inverted gyroscope issue seems to be fixed. This means the Google Camera app now does Panoramas and Photo Spheres just fine. Haven't tested any VR stuff.
- There's a new icon in the notification bar to turn Hotspot on and off.
- Improved Finger Print which should now react faster and more apps should be supported
- 4G seems to be more stable
- Bluetooth seems to be also more reliable
Still Marshmallow and no new Google security fixes.
No SPF Download available so far, only OTA.
Question: I can download the OTA Update although the phone is rooted. Will the update destroy my root or will it fail because I have no stock recovery?
Cheers,
PyroX
Update:
From Umidigi Forum:
Here's the official changelog:
1. add "double tap" wake up screen funtion
2. battery life optimized (fixed the battery drain problem)
3. fix problem of Gyroscope issue
4. camera optimized
5. finger print issue fixed
6. optimized screen touch sensitive
Both the SP Flash Tool release and the OTA update file will be shared in the
Last update
For those who have rooted the phone, unroot and reflashing original recovery *should* enable OTA updates, but I was getting an error during the flashing process in original recovery (probably due to SuperSU or Xposed modifying system partition). You can flash from SP tools without losing your data, you just need to uncheck the user data partition at the end of the list.
I don't know if this will work in the future, I guess it depends on the start/end addresses in SP tools, but until they stay the same among firmware updates, that'll work.
You'll have to reinstall TWRP (which now supports touch, fortunately) and reflash SuperSU after that.
An update is available from 20170225
Helllo guys!
My umi z i rooted. If i download via OTA the update and my phone is starting (automatic) in the recovery mode (twrp) and doen´t update the new rom.
Can anyone tell me how i can update it?
regards
peter
pmartin said:
Helllo guys!
My umi z i rooted. If i download via OTA the update and my phone is starting (automatic) in the recovery mode (twrp) and doen´t update the new rom.
Can anyone tell me how i can update it?
regards
peter
Click to expand...
Click to collapse
I think you must flash Stock recovery again.
You can find it here:
https://forum.xda-developers.com/showpost.php?p=71046153&postcount=11
Iceman66 said:
I think you must flash Stock recovery again.
You can find it here:
https://forum.xda-developers.com/showpost.php?p=71046153&postcount=11
Click to expand...
Click to collapse
thanks you iceman66 for thinking , But is there anyone who has arrived to apply FOTA with TWRP recovery?
-With stock recovery or
- with SP flash tool ?
thanks for feedback
lvdb said:
thanks you iceman66 for thinking , But is there anyone who has arrived to apply FOTA with TWRP recovery?
-With stock recovery or
- with SP flash tool ?
thanks for feedback
Click to expand...
Click to collapse
1] I tried to to run OTA with TWRP - failed.
2] I tried to flash Stock recovery only and to do OTA - failed
3] I tried to flash Stock recovery and System - failed
4] I tried to flash entire rom except for User data and ended stuck on boot logo
5] I tried to flash entire rom including User data ans ended stuck on boot logo
6] I was stuck on boot logo trying all download only, upgrade and format and downloas in SPFT but no joy
In the end I was able to flash older rom version, so I guess my attempts 4 to 6 were caused by corrupted rom download or something like that.
Overall I do not think there is a way for OTA with TWRP (even when kept in read only mode).
Suprisingly flashing stock recovery only did not help either, but that is perhaps because of changes done when rooting the phone.
hello , i have flashed the new update with spft and boot ok , after i have flashed twrp and reboot stuck at boot logo.
after some test i have replaced the old kernel in the new update and solve the boot from twrp
something weird in last kernel
A new rom is available via OTA: UMIDIGI Z. V3.02_20170317
Changelog:
1. Camera optimization
2. The UI of camera optimization
3. WLAN optimization
4. GPS optimization
I have TWRP installed and I'd rather wait for the full SPFT to install it (else I'd have to remove TWRP and so on).
cycloptux said:
A new rom is available via OTA: UMIDIGI Z. V3.02_20170317
Changelog:
1. Camera optimization
2. The UI of camera optimization
3. WLAN optimization
4. GPS optimization
I have TWRP installed and I'd rather wait for the full SPFT to install it (else I'd have to remove TWRP and so on).
Click to expand...
Click to collapse
Full SPFT is already available.
Yea ...hope this is a good one ...not had many issues though, camera fix in other thread worked well..
Works fine, use flash tool, do not flash recovery or user data and all will be safe,then reflash super user and any system mids/apps and enjoy.
New camera app looks good and seems improved
New update out ..still mm but fixes a few things
Because LineageOS 15.1 by @abhishek987 thread is bloated by questions anwsered before or not dev related - ask and discuss here - to debloat main thread.
How to flash Lineage 15.1:
!NEW AND THE ONLY RECOMMENDED METHOD!
You must be on Oreo. Before flashing delete all your saved fingerprints and screen locks.
1. Reboot to bootloader (Bootloader must be unlocked)
2. fastboot boot recovery-xx.img (in ADB)
-> Grab official recovery from here: https://forum.xda-developers.com/mi-a1/development/recovery-twrp-3-1-1-0-touch-recovery-t3688472
3. Wipe System/Data/Cache/Dalvik
4. Flash Lineage & TWRP Installer zip
-> Grab TWRP installer from the link above
5. Reboot to recovery using TWRP Recovery (In TWRP go to Reboot -> recovery)
6. Flash Gapps/MicroG (opengapps.org -> platform ARM64 -> Android 8.1 + Variant [IMO pico is your best pick])
7. Flash Magisk [latest] if you want ROOT (I bet you want!)
-> Grab Magisk from here: http://tiny.cc/latestmagisk
8. Reboot to System
How to update from previous build:
If you don't have permament TWRP, just follow the method above.
If you have permament TWRP:
Delete all your previous fingerprints (just for safety)
Boot to TWRP
Wipe Data/Cache/Dalvik (wiping is optional - but clean flash is always encouraged)
Flash Lineage ROM zip file
Flash Magisk
Flash Gapps/MicroG
Reboot
KNOWN BUGS:* No bugs right now! Enjoy bug-free rom!
If you have signal stability issues, try this:
Dial *#*#4636#*#*
Go to Phone information
Set Preferred Network Type from Unknown to LTE or WCDMA only
WHAT IS WORKING:* Everything else
LINEAGE BUILD CHANGELOG:
Code:
[FONT="Arial"]
[B]Most recent build (24.03.2018):[/B]
Fixed portrait mode
Enabled hal3 camera by default
Added doze
Lineage upstream
[B](22.03.2018): [/B]
Fixed double tap to wake (should only work for focaltech panel)
Rebased kernel to latest oreo source drop
Enabled cpusets
Lineage upstreams
[B](13.03.2018): [/B]
Fixed verity issue (builds now can be flashed without magisk)
Fixed Live Display
Fixed Substratum
Fixed ril issues
Lineage Upstream changes
[B](08.03.2018): [/B]
Fixed notification light (should work in call cases now)
Fixed slow charging
Fixed deep sleep issue
Added navbar toggle
Fixed goodix fingerprint issue (should work for all and all 5 fingerprint should be registered now)
Lineage Upstream changes
[B](06.03.2018): [/B]
Fixed led light
Added fingerprint gestures
Fixed Bluetooth name
Fixed battery capacity
Lineage upstream changes[/FONT]
Have fun with LOS!
Q&A
What does NIGHTLY mean?
Nightlies are automatical builds (every few days), so it mean you will have frequent updates, recent Lineage changes will be present in a rom. Also fixes and new stuff will come faster!
How I can go back to stock?
Grab Mi A1 tool from here: https://forum.xda-developers.com/mi-a1/how-to/tool-xiaomi-mi-a1-tool-drivers-unlock-t3742857.
Install it in your PC, enable USB Debugging on your phone, plug phone to PC
Click Flash Stock ROM button
Click Download ROM and wait
Click FlashAll. Your phone will reboot to fastboot and it will start to flash stock
[You will loose all your data, so backup is encouraged]
Do I need to downgrade to Nougat before flashing?
Not anymore It's advised to flash from Oreo
After update my FP don't work, wat to do?!
Make a clean flash using method from OP. If clean flash won't help, try: https://forum.xda-developers.com/mi-a1/development/xiaomi-mi-a1-tissot-firmware-flashable-t3759886
Is Dolby working on Lineage 15.1? How to install it?
Just download Magisk module and enjoy!
My mobile signal is unstable. Is there a way to fix it?
Yes, see a workaround from OP
Why Selinux is permissive, not enforcing?
In unofficial builds Selinux is permissive. If the build goes official, it will have Selinux set to enforcing. Don't worry, just wait for official version!
Is this rom stable enough to be a daily driver?
Depends what you need. Check buglist - if these bugs don't bother you - it can surely be a daily driver
When new build will be avaible?
Don't ask for ETAs. Developers are working hard (in their free time!) to fix a bugs - we just need to wait patiently.
Some users are experiencing wifi issues (myself included). How can i fetch the log?
Steps to reproduce: Turn off bluetooth. wait a moment... wifi will start dropping connection a lot. To fix, just turn on BT again.
Headphones do not work.
Headphones are working!
By the way. I found a bug. The equalizer don't work correct. Everytime when you skip a song you must tap the bass regulator again in the equalizer app. When you don't do it, it plays without bass.
konradit said:
Headphones do not work.
Click to expand...
Click to collapse
Everything fine here, try to reflash
Installed and used for 24 hrs with no apparent problems. No fingerprint bug.
All the other bugs reported in OP exists.
Returned to Stock since I found it a bit smoother.
I will wait for a more stable official build
Good work so far
still
rasputine said:
still
Click to expand...
Click to collapse
Are you using the deadman twrp? I got that using other TWRP versions.
goofball2k said:
Are you using the deadman twrp? I got that using other TWRP versions.
Click to expand...
Click to collapse
Yes I'm using deadman's twrp
rasputine said:
Yes I'm using deadman's twrp
Click to expand...
Click to collapse
Did you reboot after doing the data wipe?
Can I install LOS 15.1 without flashing magisk? I have tried this and had bootloop before any lineageos bootlogo
radogost said:
Because LineageOS 15.1 by @abhishek987 thread is bloated by questions anwsered before or not dev related - ask and discuss here - to debloat main thread.
How to flash Lineage 15.1: There's a few working methods. First, most popular one:
....
Third, last one:
Boot to the recovery (same recovery as method above)
Wipe system and cache ( data is optional if your are on Oreo)
Check which partition you are on (A or on partiton B)
Flash the rom on one of the partitions
Flash the twrp installer zip
link: http://www.mediafire.com/file/338o7cl72z52rzz/twrp-3.2.1-1-installer-tissot-FIXED_By_DroiDMester.zip
Reboot back to the recovery
Switch to the second partition
Flash GAPPS/MicroG and Magisk
Reboot
Click to expand...
Click to collapse
Sorry to pick this up again but the last method implies that TWRP will be installed permanently as default recovery, right? I was successfull only with the first method however I always end up in LOS recovery when try to enter recovery with Vol-up+Power after everything is installed.
I'm sure we all agree that this whole recovery mess needs to be sorted out quickly. Even experienced users are hitting snags and flood the board with questions .
goofball2k said:
Did you reboot after doing the data wipe?
Click to expand...
Click to collapse
Yes sir
i face the same issue with any methond i am using.
in some cases i am unable to install all the zips and in another case i am unable to install only magisk(error 1)
i followed exactly the steps.
any suggestions?
I'm not sure why the issues. I followed the steps in the OP, except I didn't flash TWRP, I just boot to it temporarily.
I did the following:
Flashed 7.11.18 ROM using MiFlash.
Booted into the ROM, set it up minimally.
Rebooted to fastboot, unlocked bootloader
booted temporarily to deadman TWRP, wiped system/cache/dalvik/data (just to be sure it is completely clean)
rebooted and then booted back into deadman TWRP
flashed LOS.
rebooted and then booted back into deadman TWRP
Flashed gapps and magisk.
rebooted to OS.
hey guys! If you are in STOCK OREO you need to downgrade to NOUGAT FIRMWARE version 7.11.18 because DEADMAN'S TWRP will NOT WORK PROPERLY in STOCK OREO! DEADMAN'S TWRP is made ONLY to WORK ON NOUGAT rom that's why you get those errors!
Flashed from 8.1.10 without any problems...
ZSL mode of gcam doesn't work..
Can somebody tell me how to disable hardware navigation keys?
---------- Post added at 01:47 PM ---------- Previous post was at 01:47 PM ----------
ZSL mode of gcam doesn't work..
Can somebody tell me how to disable hardware navigation keys?
t0per666 said:
hey guys! If you are in STOCK OREO you need to downgrade to NOUGAT FIRMWARE version 7.11.18 because DEADMAN'S TWRP will NOT WORK PROPERLY in STOCK OREO! DEADMAN'S TWRP is made ONLY to WORK ON NOUGAT rom that's why you get those errors!
Click to expand...
Click to collapse
Tornado95 said:
Flashed from 8.1.10 without any problems...
Click to expand...
Click to collapse
Hmm so which one is telling the truth? ??
Sent from my Xiaomi Mi A1 using XDA Labs
***ROM Information***
Based On : Revolution OS 9.3.21
Android Version : Android 8.1
Status : Stable
****Features***
All Features Of Android 8.1
Full -Screen Gesture
Gapps Included
Pre-Rooted
Face-Lock
Youtube Vanced
***What's Working***
Boot
Sound
Volte
GPS
BT
Wifi
Hotspot
Camera
Gcam
Reading Mode(Use That Nightlight App)
-----------------------------------------------------
***Bugs***
Lockscreen Wallpaper
****Credits****
What's New(Rvbanna420)
Revolution OS
Jayant222
rupanshji For Kernel
Oleg Polisan
----------------------------------------------------------
****Installation*****
1. Backup All Data
2. Wipe Delvick/Data/System/Vendor/Cache (Use Orange Fox Recovery)
3. Install ROM & Fix
4. Magisk 18.2 And Reboot
Enjoy!!
Note If You Didn't Use Give Magisk Den This ROM Will Not Boots On Your Device So Use Only This Magisk File
///***DOWNLOADS******///
Revolution OS 9.3.21 : https://mega.nz/#!eu5GRSiZ!c59J5vdyQt5T_cXGe7hDo755e3dO2m8MqsiEekkJvic
Fix : https://drive.google.com/open?id=1cBNJo-dmiWDjn_pCszMQ1O303rHKYM80
Magisk : https://drive.google.com/file/d/1cBoNwZczG3uXeOqnLTArcadFHiGSy9b_/view?usp=drivesdk
***Kernel Sources***
Chimera Kernel Source : https://github.com/ChimeraKernelProj...a_land-current
If You Have Any Query Den Contact Us On Telegram" Whatsnew_Official "
Any DPI Related Issue? And how much time it will take to boot? I flashed it 5 minutes ago. Still booting up ;_;
Can you pelease upload to gdrive?
Still bootloop for my device
I've have had the same situation in his miOS ROM. I helped me to flash an kernel manually after I flash the ROM. This works
AlexandreVegetaroux said:
I've have had the same situation in his miOS ROM. I helped me to flash an kernel manually after I flash the ROM. This works
Click to expand...
Click to collapse
I follow installation instruction.
Use fix.zip
Flash kernel manually
And still bootloop ?
holmesdu1 said:
I follow installation instruction.
Use fix.zip
Flash kernel manually
And still bootloop
Click to expand...
Click to collapse
I used Chimera kernel.
AlexandreVegetaroux said:
I used Chimera kernel.
Click to expand...
Click to collapse
I did not get boot to that rom. I tried everything
Try to format internal space, if there is a massage for en or decryption failure during boot process.
Boooootttloooooopppp
I have a weird problem:
When using Custom ROM's that use a custom vendor image, all sensors stop working. But when using Custom ROM's that use the stock OOS vendor image, Omni ROM and Paranoid Android, they work. On OOS they obviously work too.
Thing I've tried so far:
MSM Download Tool (Upgrade and SMT Download Mode)
Flash ROM's with fastboot
Flash ROM's with TWRP
Firmwares I've tried so far: 10.3.0 (global), 20.0.3 (eu), 10.0.2 (eu)
I don't know why only I have this bug apparently. I would appreciate everyone's help into investigating into this.
btw here's a log of crdroid (this rom uses a custom vendor image) for those who want to check it out: https://www.dropbox.com/s/3myddc1rzijqbcm/log.txt
What is your method to flash crdroid rom?
c3drik 67 said:
What is your method to flash crdroid rom?
Click to expand...
Click to collapse
I have tried both fastboot and twrp (for twrp i followed the official instructions)
I finally fixed it (somehow): Used msm download mode one more time and now it works!
hellcat50 said:
I finally fixed it (somehow): Used msm download mode one more time and now it works!
Click to expand...
Click to collapse
Am also facing few problems from few days bro,
Camera is crashing
Torch is disabled
Sensors are not working.
I also tried:-
-Flashing Custom Roms
-Flashing Stock Roms (A9 , A9(beta), A10)
-Used MSM Tools also no use was there:'(
Device:- OP5{CHEESEBURGER}