help me, I want to flash my LG G PRO 2. but when it comes to download mode it can not be seen only fastboot mode, as a result LG G PRO 2 can not be detected on my computer, I want to ask for a clear tutorial from all of you
thank you for helping me:crying::crying:
kaziroute said:
help me, I want to flash my LG G PRO 2. but when it comes to download mode it can not be seen only fastboot mode, as a result LG G PRO 2 can not be detected on my computer, I want to ask for a clear tutorial from all of you
thank you for helping me:crying::crying:
Click to expand...
Click to collapse
1. Power off your phone.
2. Press volume down and connect phone with computer via usb cable. Windows will start installing drivers. Linux does not need any drivers. Phone will boot into Download Mode. Now you can flash KDZ or TOT using LGUP etc.
Related
lg risio
How do i put my lg risio into download mode, tell me specifics! please!!
Is adb available?
alexfirexxx said:
How do i put my lg risio into download mode, tell me specifics! please!!
Click to expand...
Click to collapse
Power off the LG Risio. connect your usb cord to a PC. Hold volume up on cell, while plugging micro usb into Risio. Continue holding volume up until download mode finishes loading.
hello ,
After reading a lot about my device i see a lot of people saying we need fast-boot working for our device to start any type of development , What causes a device not to work with stock SDK fast-boot ?
When it comes to fast-boot, what exact drivers are used to recognize the device in fast-boot mode ? for example the current drivers installed under LG drivers are LG Android Driver , LG SP USB Driver , LG United Mobile Driver , LG USB WML Modem Driver ?
i use both windows and Ubuntu and followed every fast-boot guide on the internet and just cant quit get fast-boot working , i can get adb commands to restart the device but that's about it .
the device im working with is the LG G Stylo LS770 .
Can anyone help me on Getting My LG G PRO F240L back, it stucks and always restarting on CWM RECOVERY saying "Device Unlock! So Boot Success!"
I've tried to Flash KDZ LOLLIPOP using LG FLASHTOOL 2014 but stucks on processing . I Bet the problem is the "UNIDENTIFIED DEVICE -> NO DRIVER FOUND" When connecting it to Windows 7 Ultimate, I went to Device Manager and sees "UNKNOWN DEVICE" I Uninstalled it and Tries to Connect again to DOWNLOAD MODE but Unfortunately " NOT RECOGNIZED " the device I have changed different USB CABLES and restart the Laptop Several Times . I manage to UPDATE the DRIVERS but the Problem was I can't connect the Pocketwifi via Wireless Connectivity, I can Connect it with The Cable Inserted on the Laptop but Where the Phone should Get into Download Mode by the Laptop IF there's an inserted pocketwifi on it. Please Help who knows what to do with it... Or is there something that should Fix my LG G PRO that Stucks on CWM .
Sonjob said:
Can anyone help me on Getting My LG G PRO F240L back, it stucks and always restarting on CWM RECOVERY saying "Device Unlock! So Boot Success!"
I've tried to Flash KDZ LOLLIPOP using LG FLASHTOOL 2014 but stucks on processing . I Bet the problem is the "UNIDENTIFIED DEVICE -> NO DRIVER FOUND" When connecting it to Windows 7 Ultimate, I went to Device Manager and sees "UNKNOWN DEVICE" I Uninstalled it and Tries to Connect again to DOWNLOAD MODE but Unfortunately " NOT RECOGNIZED " the device I have changed different USB CABLES and restart the Laptop Several Times . I manage to UPDATE the DRIVERS but the Problem was I can't connect the Pocketwifi via Wireless Connectivity, I can Connect it with The Cable Inserted on the Laptop but Where the Phone should Get into Download Mode by the Laptop IF there's an inserted pocketwifi on it. Please Help who knows what to do with it... Or is there something that should Fix my LG G PRO that Stucks on CWM .
Click to expand...
Click to collapse
Hello,
You may try posting your query here Ask any Q noobfriendly with all relevant details, the experts there maybe able to assist you.
-Vatsal
Do you know who's expert on fixing LG PHONES ?
Sonjob said:
Do you know who's expert on fixing LG PHONES ?
Click to expand...
Click to collapse
Hello,
That thread is frequently visited by experts all over the forum willing to help newbies. Please post your query in the thread I linked above.
-Vatsal
hello guys, i have a problem with my lenovo A850i.
after flashing, my phone cannot on, i check my battery and its still in good condition, i try to flashing one again using SP flash tool, and now my phone were not detect by pc, the led will light up when i remove the battery when it connect to usb, but when i put back the battery,the light will close. i connect to usb and try mane button combination , but still not work...
i have been stuck with this about 3 day, i hope someone can help me..
Sorry for my broken englosh...
What did you flash exactly? You sure you flashed something that's specifically made for your phone ?
Also what combination have you tried yet.
Download another stock rom for your phone load scatter text ,click download and connect your phone to PC via USB while holding the vol+button only
northwindtrades said:
What did you flash exactly? You sure you flashed something that's specifically made for your phone ?
Also what combination have you tried yet.
Download another stock rom for your phone load scatter text ,click download and connect your phone to PC via USB while holding the vol+button only
Click to expand...
Click to collapse
Yes sir, im very sure that i flash lenovo A850i firmware, do u have any other combination for me to try to make my phone connected to pc, i have try holding vol+ button while connect to pc via usb, but it not work, all i have now just a red led light that turn on without battery
jimbo94 said:
Yes sir, im very sure that i flash lenovo A850i firmware, do u have any other combination for me to try to make my phone connected to pc, i have try holding vol+ button while connect to pc via usb, but it not work, all i have now just a red led light that turn on without battery
Click to expand...
Click to collapse
Meta mode( usually vol+ button) is the most successful way of of recovering from a hardbrick for lenovo but after looking up your device you guys coonect meta mode dffrntly.now this is the most successful way of unbricking your phone
pick the official ROM for A850i came with A850_203 multilanguage firmware.
You'll need MTK 65XX metamode driver – USB VCOM Preloader driver, if you previously installed then there is no need.
SP Flash Tool to download the firmware to the phone.
(Make sure you have a working version as some so tool don't work as they're supposed to into ,I'm using version 5.1)
Run SP-Flash Tool, map the scatter loading MTK6582 for your firmware, normally inside the firmware folder. It will mapped the necessary file and partition for your device, After that click Download and leave it searching for device, it will start flash when found the device,
so next we need to activate back the dead phone of Meta mode USB Vcom MTK65xx , firstly remove the battery, simply press and hold VOLUME UP & DOWN + Power Button simultaneously while reinsert USB that connect the phone to PC.
The previous SP Flash that searching for device will start the download process just after the META mode activated, if you failed then try repeat the step :fingers-crossed:
And hit the thumps up button if this post has been helpfull good luck:good:
northwindtrades said:
Meta mode( usually vol+ button) is the most successful way of of recovering from a hardbrick for lenovo but after looking up your device you guys coonect meta mode dffrntly.now this is the most successful way of unbricking your phone
pick the official ROM for A850i came with A850_203 multilanguage firmware.
You'll need MTK 65XX metamode driver – USB VCOM Preloader driver, if you previously installed then there is no need.
SP Flash Tool to download the firmware to the phone.
(Make sure you have a working version as some so tool don't work as they're supposed to into ,I'm using version 5.1)
Run SP-Flash Tool, map the scatter loading MTK6582 for your firmware, normally inside the firmware folder. It will mapped the necessary file and partition for your device, After that click Download and leave it searching for device, it will start flash when found the device,
so next we need to activate back the dead phone of Meta mode USB Vcom MTK65xx , firstly remove the battery, simply press and hold VOLUME UP & DOWN + Power Button simultaneously while reinsert USB that connect the phone to PC.
The previous SP Flash that searching for device will start the download process just after the META mode activated, if you failed then try repeat the step :fingers-crossed:
And hit the thumps up button if this post has been helpfull good luck:good:
Click to expand...
Click to collapse
Okay, i will try it first
Hi! So my v50 is on bootloop. Thought I could fix it by flashing the stock firmware through LGUP but I'm stuck with finding how can the v50 be connected to the computer.
I can go to download mode but it is not being detected by the computer.
I have an LG G7 that I tried to connect through download mode and I can see that the computer detects it. Device manager shows LGE androidnet usb serial port but not with the V50.
I already tried all sorts of LG drivers but no luck at all.
Please help
Rule_Breaker said:
Hi! So my v50 is on bootloop. Thought I could fix it by flashing the stock firmware through LGUP but I'm stuck with finding how can the v50 be connected to the computer.
I can go to download mode but it is not being detected by the computer.
I have an LG G7 that I tried to connect through download mode and I can see that the computer detects it. Device manager shows LGE androidnet usb serial port but not with the V50.
I already tried all sorts of LG drivers but no luck at all.
Please help
Click to expand...
Click to collapse
Have you solved this yet?
Is your phone bootloader unlocked? (Can you access fastboot). Which model is it (sprint, Verizon, Korean, etc)
Also, what happened just before it went into bootloop?
way2aware said:
Also, what happened just before it went into bootloop?
Click to expand...
Click to collapse
Hey can you help me? Im facing the same problem with my LG V500N korean version