Related
Hey !
I was trying out the ROM Manager and was checking out the roms available in the list, i accidentally pressed a wrong model and my device was flashed...now my phone is hard bricked, it doesn't even switch on in any mode.
i cam across this link for Samsung Galaxy S
http://forum.xda-developers.com/showthread.php?t=838942
here he shows how to get the phone into download mode.
Wanted to know if the same procedure can be used for a Samsung Galaxy Ace ??
thanks in advance ...
an exact thing happen to me.but i manage to get my pc to detect the phone by pressing power+volume up+home (i dont know what mode).odin detected my phone but the flashing stuck at setup connection..because it was not in downloading mode i guess...
same as above, help needed!
additional info: pc and odin detect phone bot not kies, on kies it keep saying connecting....and theres no display on the phone
same here wont do anything
same with me, my phone wont start even on download mode so you cannot use odin.. please help.
same case , i accidently pressed wrong phone version and my phone was 'bricked'
any help ?
Same happened here! Has anyone found a solution??
Edit: All right. Here's what I did:
1. Remove the battery from the Galaxy Ace
2. Connect the USB cable to the PC as well as the phone
3. Hold: volume down + home + power buttons all together and insert the battery while you're doing that (could be a bit tricky but it works)
4. Now you should be in download mode with "downloading" on your screen
5. Open up Odin v4.38 and flash your stock firmware (find it on samfirmware)
6. That's it! It should be fully working now (at least it did for me)
Tell me if it works for you guys!
its okay alr , i bring it to the service center it claims my motherboard spoil , it changed a new one for me
@ramy.s - i tried what you did but still nothing happens.
@donomeoww - how much did it cost you for samsung to replace your motherboard? i know jtag can be an option to revive the unit but sadly the model is not yet supported, lucky for samsung s5570 though they already have jtag support on 1st week of april.
same thing happened to me.
did different methods to bring it to boot, even the two-prong diy to force to turn it on, still no go.
in the end, store replaced the device...with a bnew one of course.
Did anybody successfully revived bricked ACE??
Found expensive solution...
google "riff box samsung galaxy ace"
Samsung SGA revived
hey guys, i bricked my phone last april then the only solution to revive it is by replacing the motherboard or by using JTAG. btw JTAG support for samsung was released last May 12.
delete post
delete post
Galaxy Ace Bricket
i am also facing same situation..any update about please share
sridharmane said:
Hey !
I was trying out the ROM Manager and was checking out the roms available in the list, i accidentally pressed a wrong model and my device was flashed...now my phone is hard bricked, it doesn't even switch on in any mode.
i cam across this link for Samsung Galaxy S
http://forum.xda-developers.com/showthread.php?t=838942
here he shows how to get the phone into download mode.
Wanted to know if the same procedure can be used for a Samsung Galaxy Ace ??
thanks in advance ...
Click to expand...
Click to collapse
It just corrupts your motherboard
So a hardware issue can't be solved from home
Only option I guess is Service Center
Hope you have warranty
ROM Manager is a tricky tool
It hard bricks your phone if you do even a step wrong !
Ps ....Im just cautioning everyone so that it doesn't happen in future to others....
Sent from my Xperia Neo V using xda premium
dimethicone2k9 said:
@ramy.s - i tried what you did but still nothing happens.
@donomeoww - how much did it cost you for samsung to replace your motherboard? i know jtag can be an option to revive the unit but sadly the model is not yet supported, lucky for samsung s5570 though they already have jtag support on 1st week of april.
Click to expand...
Click to collapse
Hardbricked ace cost 0 .
sridharmane said:
Hey !
I was trying out the ROM Manager and was checking out the roms available in the list, i accidentally pressed a wrong model and my device was flashed...now my phone is hard bricked, it doesn't even switch on in any mode.
i cam across this link for Samsung Galaxy S
http://forum.xda-developers.com/showthread.php?t=838942
here he shows how to get the phone into download mode.
Wanted to know if the same procedure can be used for a Samsung Galaxy Ace ??
thanks in advance ...
Click to expand...
Click to collapse
reloading tar by odin:laugh:
Hi i got Sprint samsung galaxy s2 that i tried to root but i messed things up when i tried to set it back into the original firmware an rushed things now i get a messege
Firmware upgrade encountered an issue. Please selected recovery mode in Kies & try Again
but my pc wont recognize my phone when i plug it in and it wont go into download mode or recovery mode any more. I have tried taking out the battery and putting back in and tried going into download mode & recovery several time and had no luck i have read as many forums as i could all seem to tart the same but have not found a fix for my issue i relly like this phone and im kind of bummed that i messed it up
could annyone help me i would really be greatfull
[Firmware] Galaxy Tab 3 7in SM-T210R
How to restore your Samsung Galaxy Tab 3 7in wifi tablet with odin and the stock firmware. Unbrick your device
Directions [NOTE] make sure your battery is fully charged before starting this process.
Download files listed to your computer
UPDATED LINK WITH ALL Firmware in one easy spot HERE
1. http://www.sammobile.com/firmwares/1/?model=SM-T210R&pcode=0#firmware or MK1 Firmware to fix screen flicker
2. ODIN 3.07.ZIP
3. Samsung drivers
extract the drivers and install.
extract odin 3.07 program to desktop
extract firmware to desktop
Enter download mode / odin mode on the tablet from a powered off state.
Press and hold power, home, and volume down. you will see a warning screen then press volume up to continue
Now the device is in download mode. plug in usb cable to computer and device and let the drivers install give it 3 minutes
run odin 3.07 and wait to see the com port connect.
Click on pda button in odin and find the firmware file you extracted to your desktop and select it
press start and wait for device to finish the flash and reboot.
Thats it you just restored the firmware on your device.
Link to samsung mobile firmware
http://www.sammobile.com/firmwares/1/?model=SM-T210R&pcode=0#firmware
How to video linked here VIDEO
Thanks for the info. Is there already a way of how to reset the flash counter ?
batman08 said:
Thanks for the info. Is there already a way of how to reset the flash counter ?
Click to expand...
Click to collapse
No sure if Triangle away app will work on this device yet. I really dont care if it shows flash counts it doesnt bother me.
Question, does this remove cwm?
Sent from my Galaxy Nexus using XDA Premium 4 mobile app
meber said:
Question, does this remove cwm?
Sent from my Galaxy Nexus using XDA Premium 4 mobile app
Click to expand...
Click to collapse
It should restore the entire device even stock recovery
Video added to OP
hi
is the firmwere contains or supports the arabic language ?
if not how do i find a firmwere that supports arabic language
tab 3 ( sm-t210r )
thak you
i did this but my galaxy tab is like all colored flicked like green blue red etc...keeps flickering...i just bought this so i know its not a hardware problem, because it was fine til i rooted....now its all like shaky and flickery
Thank you
I am glad I found this I just got mine a week ago and was in a hurry to root it so I could play around and in doing so I spaced off making a backup. So again thanks your a lifesaver. Can do the updates then back it up before I root it again. You happen to know of any good roms for this tablet?
it didint work for me i get a block of yellow text and it says factory mode and alot of other stuff
my tab 3 t210 doesnt let me choose any usb mode MTP or PTP. and doesnt let me uncheck Developer options -> usb debugging. When i try to do these, my tab restarts and panic mode comes. would this subject solve my problem?
tuncell said:
my tab 3 t210 doesnt let me choose any usb mode MTP or PTP. and doesnt let me uncheck Developer options -> usb debugging. When i try to do these, my tab restarts and panic mode comes. would this subject solve my problem?
Click to expand...
Click to collapse
yes I think it would
is the latest version for the galaxy tab 3 t210r wifi only for the US the MK1 listed as unknown on http://www.sammobile.com/firmwares/1/?model=SM-T210R&pcode=XAC ??
does this overwrite recovery?
if so can you still install philz recovery from http://forum.xda-developers.com/showthread.php?t=2468441 ??
also will the root method work from http://forum.xda-developers.com/showthread.php?t=2433853 ??
biggyhead said:
i did this but my galaxy tab is like all colored flicked like green blue red etc...keeps flickering...i just bought this so i know its not a hardware problem, because it was fine til i rooted....now its all like shaky and flickery
Click to expand...
Click to collapse
After I rooted my Samsung Galaxy Tab 3 7" using prerooted.tar.md5, I had the same issue. The screen kept flickering and now I want to unroot to go back to the original manufacturing setting. I just flashed this firmware and it restored to the original condition except the flickering problem still exists. Please help.
unbrick my galaxy tab 3 10.1 P5200
First I greatly appreciate this forum; you may actually be able to help - - - -
Apparently I may have turned my Galaxy Tab 3 10.1 P5200 into a brick; my battery was below 50%, and it asked me if I wanted to update my IAP? - -somewhat of a novice in this regards, said yes, immediately asked me to connect my charger, after I did the power was not charging and continued to drop. Now it will not charge at all - - -no battery prompt, no screen, no nothing, went completely dead. My question is how can I restore power to my TAB 3? I have tried most of the suggestions from google sites; and an IT friend of mine indicated this sounds like a firmware issue and I would have to send to manufacture - - -I purchased it 1 1/2 months ago brand new; I LOVE MY GALAXY TAB 3; currently in a war zone and it would take forever to send back and get back; can someone give me some hope on restoring power so I do not have to send back . . .Thanks to all of you, be safe.
Horatio03 said:
First I greatly appreciate this forum; you may actually be able to help - - - -
Apparently I may have turned my Galaxy Tab 3 10.1 P5200 into a brick; my battery was below 50%, and it asked me if I wanted to update my IAP? - -somewhat of a novice in this regards, said yes, immediately asked me to connect my charger, after I did the power was not charging and continued to drop. Now it will not charge at all - - -no battery prompt, no screen, no nothing, went completely dead. My question is how can I restore power to my TAB 3? I have tried most of the suggestions from google sites; and an IT friend of mine indicated this sounds like a firmware issue and I would have to send to manufacture - - -I purchased it 1 1/2 months ago brand new; I LOVE MY GALAXY TAB 3; currently in a war zone and it would take forever to send back and get back; can someone give me some hope on restoring power so I do not have to send back . . .Thanks to all of you, be safe.
Click to expand...
Click to collapse
ok, here's the update, I have in fact been told it IS as a result of the firmware . . . . is there a 3rd party or download available that can be used to fix the firmware issue . ..if known please, please, please, give the link - - -thank you for your attention
screen flickers
when i restore my screen flickers and shakes and changes colors randomly
does it work for my : samsung galaxy tab 3, 7 inch SM-T210 ?
Bad firmware image
The same thing was happening to me so i went to sammobile to find a good copy of the firmware and sure enough that was it. Took me 12 friggin hours and i think i cried a little, but now no more flickering.
Sorry im new so i cant submit the link but its the first result in the list when you search for firmware on sammobile.
samsong313 said:
The same thing was happening to me so i went to sammobile to find a good copy of the firmware and sure enough that was it. Took me 12 friggin hours and i think i cried a little, but now no more flickering.
Sorry im new so i cant submit the link but its the first result in the list when you search for firmware on sammobile.
Click to expand...
Click to collapse
Thread updated. when I made this thread the device it was on a different firmware and it must not work anymore so links in OP are updated get the firmware from samsung mobile
Hey guys. can i have some kind of feed back from the people who know about this problem . i have rooted galaxy tab 2 10.1 att 3g +wifi . everything was working jus fine until i flashed recovery switcher from here: http://forum.xda-developers.com/showthread.php?t=2676180 . after i installed it i then tried to flash the TWRP recovery . when aked to reboot my tab never came back on instead my computer recognize my tab as Qualcomm HS-USB QDLoader 9008 (COM7) . I cant get Download mode neither Recovery mode its like completely dead now.
here are some info of my tab:
SGH-497 At&t
4.1.2 JB
CWM recovery v6.0.2.3
Your tab is not listed in this link , you goofed up, better start writing to Santa for a new tablet .
Your tab is not a P5113, two different tabs. 10" yes, but different ROMs and operating systems. Its like flashing a Samsung phone with a Motorola ROM, all you get is a brick.
That's why you have to read op's carefully.
Pp.
Yes, like @PanchoPlanet told: AT&T have different hardware, seems like a hardbrick.
If you can't get into downloadmode nobody can't help, you need to send it to repair center.
Send from OnePlus One using Tapatalk
So this isn't something I can fix on my own ? This is the first time I screw up my device. There is noway possible for me to get Odin to recognize it ? Not sure if there is anyone in my country that can fix this :/
Probably cheaper to purchase a new tablet. ( and leave it stock ) .
Sorry about your lose. ?
Pp.
mkeeoma said:
So this isn't something I can fix on my own ? This is the first time I screw up my device. There is noway possible for me to get Odin to recognize it ? Not sure if there is anyone in my country that can fix this :/
Click to expand...
Click to collapse
Nope you can't fix it on your own. There are several variants of the Galaxy Tab 2. Wifi only which is 5113, 5110 and 5100 the latter two are different in that the 5100 has a modem like a phone and the 5110 is like the WiFi only but it doesn't have an IR(infrared) similar to a TV remote.
Flashing the wrong firmware for your device in most cases makes it unusable and an expensive brick. In some cases you can possibly find a jtag service which gives you the option of someone else reverting the bootloader back to a working version, it's a repair service in which they have to go into the device and manually edit the motherboard. Sadly this service is not available for all devices, your better off getting another one at this point
From my CM11 S3
If this is the wrong place i do appologise
have spent all morning searching this forum with plentiful ideas but cant seem to fix the issues
My tablet had been lying dormant for about a month
went to charge it this morning and it was giving me a
Custom binary blocked by frp lock
After a quick search found some solutions about re flash etc etc
did my thing in odin only for it to fail
The problem next was i can no longer get in to download mode because im getting a blue screen saying
An error occured whilst updating the sfotware
use emergency recov function in smart switch
so downloaded smartch switch and there is no recovery option available to me the tab is not appearing in the current version
So i downloaded an older versio
the tab became avaialble but when searching my device and serial number, it said it is not supported with this device and to contact the service centre??
any suggestions on a fix
feel like im stuck where i can not even get in to download mode to try and reinstall a stock build or anything
thanks in advance
and appologies if in the wrong place