Hello,
I am looking for the Novatel 5792 1.5 firmware update.. Novatel was bought (or just changed their name)? and forwarding to a new site.. Their site is just f*cked up.. The URL forwards are not even going to valid URLs, nevermind that when one corrects the URL, the page still doesn't load.
The firmware update provides two important things to me, a third is less important though.
Enables LTE bands 2 and 5, and is supposed to flash the root password in the 'status area' during the update. Also supposed to flash the SIM unlock code, but I was desperate and activated my DC-Unlocker dongle specifically to unlock it, argh, but whatever..
Does anybody have a working download for the generic 1.4 or 1.5 USB-installed firmware update for the Novatel 5792?
The AT&T version should work as well, but I can't find the downloads anywhere.. Every guide suggests the support section of novatelwireless.com which simply doesn't exist any more.
Thank you
Bump.. Would really appreciate a link to the file on their site.. The links to actual files still seem to be working, but the listings are not working.
Thought the bump rule as a week.. Apparently it is only a day. Better than getting it backwards eh
bump.. me too
Related
Hi,
I just purchased a new HTC Touch HD phone T8285.
I have realised that it has come pre-loaded with a lot of Telstra configuration. I am not a Telstra customer and I would like to start with a clean phone in the factory shipped state.
I am in Australia and currently have a contract through Virgin (Optus)
Can anyone advise how I can reset the phone configuration so that all reference to Telstra is removed and that the standard factory settings are in place for Australia.
Any help is appreciated
Scott
Hi, welcome to XDA! You would need to flash a chef's cooked rom (must have HardSpl 1st). Check out the Blackstone section of this forum: http://forum.xda-developers.com/forumdisplay.php?f=453
Also, read the Sticky's!
How do I determine which one of these posts is relevant to my HTC Touch HD...?
When I search for this there are a lot of listings.....can you point me to one that might be specific for my device and location
Apologies as I am new at this....
Thanks
Scott
Welcome to forums
here you´ll learn how to flash a new ROM:
http://forum.xda-developers.com/showthread.php?t=505377
Hope it helped,
scott56hannah said:
How do I determine which one of these posts is relevant to my HTC Touch HD...?
When I search for this there are a lot of listings.....can you point me to one that might be specific for my device and location
Scott
Click to expand...
Click to collapse
Scott, just click the http link in my above post and then do your search
Thanks for that I can see those instructions and will attempt to follow them...
A further question should I attempt to first use the following ROM upgrade link from HTC to see if it resolves my problem. Rather then using the previous reset instructions...
http://www.htc.com/www/SupportDownload.aspx?p_id=179&cat=2&dl_id=533
Or will this simple return me to the current state with the Telstra settings in place ?
Thanks
Scott
Hi,
Before I work use the post above to re-install the ROM on my HTC Touch HD....could I confirm the following...
- will the re-install of this mean that I will not be able to take updates to the ROM from HTC in the future
- will this process work for me as an Australia mobile phone user ?
- does the install include all the Windows Mobile operating system on the phone ready to use
Once again thanks for you help......I am new to this and want to make sure that I don't stuff the phone that have
Thanks
Scott
scott56hannah said:
Hi,
Before I work use the post above to re-install the ROM on my HTC Touch HD....could I confirm the following...
- will the re-install of this mean that I will not be able to take updates to the ROM from HTC in the future
- will this process work for me as an Australia mobile phone user ?
- does the install include all the Windows Mobile operating system on the phone ready to use
Once again thanks for you help......I am new to this and want to make sure that I don't stuff the phone that have
Thanks
Scott
Click to expand...
Click to collapse
- You can make any update in the future, cooked ROM´s from XDA are much better than any "official" version
- It should work
- Yes
Social Web - Remove Telstra Wap Redirections ?
HI,
Dont know if anyone can help ... I have been searching the forums, but cant find this anywhere, so apologies if it is answered somewhere else.
I have a new HD2 with Telstra. I have managed to remove the locked quicklinks on the home page, and completed a few other incredible tweaks, but I just cannot seems to get the Social Web links to work when connected to WiFi - they will work when connected via Next G.
On WiFi, when I click on the Facebook icon for example, I get redirected to waprd.telstra.com/redirect?target=facebook-g ... and then nothing happens for about a minute. Just a white screen until I get a message saying "Could not connect to the remote server" . Yet, when I am connected via Next G I connect to Facebook immediately.
I have tried to find the xml code to change the URl, but I cannot find it anywhere.
Is anyone else having this problem, and if they did, was there a solution? Overall I am really happy with the phone (now that I seem to have spent about 3 days tweaking it!) and I would really like to get this fixed.
Thanks so much in advance.
Sarah
sarah72 said:
HI,
Dont know if anyone can help ... I have been searching the forums, but cant find this anywhere, so apologies if it is answered somewhere else.
I have a new HD2 with Telstra. I have managed to remove the locked quicklinks on the home page, and completed a few other incredible tweaks, but I just cannot seems to get the Social Web links to work when connected to WiFi - they will work when connected via Next G.
On WiFi, when I click on the Facebook icon for example, I get redirected to waprd.telstra.com/redirect?target=facebook-g ... and then nothing happens for about a minute. Just a white screen until I get a message saying "Could not connect to the remote server" . Yet, when I am connected via Next G I connect to Facebook immediately.
I have tried to find the xml code to change the URl, but I cannot find it anywhere.
Is anyone else having this problem, and if they did, was there a solution? Overall I am really happy with the phone (now that I seem to have spent about 3 days tweaking it!) and I would really like to get this fixed.
Thanks so much in advance.
Sarah
Click to expand...
Click to collapse
hi sarah,
just wondering how did u get rid of the quicklinks off the the home screen, im not happy how they can not provide a phone in its original state!!any other important tweaks i should do when i purchase the phone??
waprd.telstra
I'm having the same issues any waprd.telstra sites will not work in a wifi enviroment. While I'm asking does anyone know hoe to changes the icons in the telstra "news and sport" or "social web" screens" ?
Hey Magic3091
Unfortunately most of those items are hard wired into the ROM. And the ROM is written to Telstra's specs. Hence the branding and all the BS
I suggest you try a new ROM to remove all of these. You'll have to do some reading to find out which is best for you.
I only just got my HD, and having seen how much Telstra stuff is there I WILL be ROMing it. I just need to figure out which one. If I rememder I will post which I choose.
Currently the MIRI rom looks like the best - new WinMob6.5 and Touch flo.
Cheers
Boxersox
HI can anyone tell me where to get new skype from 2.07 rom ???
thanks in advance.
You won't find anyone with it here. The best solution is to simply flash to a ROM that has it.
I have so much data on phone can't backup all of it so dont wana change rom for time being........
Im not sure where to grab the version of swype that has been extracted from the 2.07 rom... i am trying to find it myself!
The swype cab created from the version ripped from the Samsung Omnia 2 is all over the web though... google should bring up a couple of places to download it from.
Does anyone know of any differences between the two versions?
Audio Oblivion said:
Im not sure where to grab the version of swype that has been extracted from the 2.07 rom... i am trying to find it myself!
The swype cab created from the version ripped from the Samsung Omnia 2 is all over the web though... google should bring up a couple of places to download it from.
Does anyone know of any differences between the two versions?
Click to expand...
Click to collapse
You will have to search in the underground... Extracting the software and offering it as a cab is clearly not wanted by the creators and owners of the software. Offering links to warez is completely against xda rules.
The difference between the 2 might be some more language support, and that the HD2 version was made for HD2, as simple as that. I think it still might be an option to flash a ROM which carries it on board - or, at least, as long as this is tolerated.
Maybe in the close future, HTC will bring another ROM update which offers this great piece of software. Or, as stated otherwise, Swype might decide to make a retail offer at some time. If they do at a decent price, I believe they could do great business - as seen with other products, at unreasonably high prices, you won´t sell big, but at fair pricing, you can succeed.
I cannot find the new version anywhere!
If anyone has a link or would like to email it to me that would be very much appreciated!!
Karlos G said:
I cannot find the new version anywhere!
If anyone has a link or would like to email it to me that would be very much appreciated!!
Click to expand...
Click to collapse
pocketnow.com has written a nice article about it. Read it
i downloaded new version from pockernow article. noted some minor improvements.....
Karlos G said:
I cannot find the new version anywhere!
If anyone has a link or would like to email it to me that would be very much appreciated!!
Click to expand...
Click to collapse
Are u refering to version 3.9?. I installed that and it reset my email pwds
Cheers!
It's also here http://forum.xda-developers.com/showthread.php?p=5679513
Hmm I get an error saying "Cannot Open English File" when Swype starts up anyone else having this?
kivine said:
Are u refering to version 3.9?. I installed that and it reset my email pwds
Click to expand...
Click to collapse
I had the same thing, only installed yesterday so didn't do much checking of the phone. Quite a few problem were caused by the T-Mobile version . Data connection is screwed and all email passwords needed to be reset and my Wifi password are also gone lol. Did some reading online as well and quite a few other people have experienced the same problems, some have even had to HARD RESET to get their phones working correctly, fortunetly for me just uninstalling the CAB and giving the phone a few minutes resolved my Data connection issues , will put back on the Omnia version and leave it at that for the time being.
So I advice using the newest version of Swype with EXTREME caution!!!!
I tried it after much hesitation... Had to do a new setup for all email accounts, data connection and wifi connection. But it seems to be fine now, I'll see in a few days if it stays like that.
I'm using SWYPE WVGA 3.9.10.10.5032 on my HD2 without any problems.
xavierdemon said:
I had the same thing, only installed yesterday so didn't do much checking of the phone. Quite a few problem were caused by the T-Mobile version . Data connection is screwed and all email passwords needed to be reset and my Wifi password are also gone lol. Did some reading online as well and quite a few other people have experienced the same problems, some have even had to HARD RESET to get their phones working correctly, fortunetly for me just uninstalling the CAB and giving the phone a few minutes resolved my Data connection issues , will put back on the Omnia version and leave it at that for the time being.
So I advice using the newest version of Swype with EXTREME caution!!!!
Click to expand...
Click to collapse
Had the same, but all I had to do was re-enter the passwords (and mail servers for gmail) and re-run the connection setup wizard. Now I'm fine and dandy and the software is nothing short of awesome... Supports Italian, German, French, English and Spanish; I tested all languages and it works fine
I'd say it is a crucial addition to the HD2, as I use it every day, and it makes my text input much less of a chore. It is particularly useful because of its multi-language support. I've never had any problems like those described, thankfully.
have you guys done any soft resets since the initial reset after installation? I also found the keyboard became slow to start after I played with the setting. the omnia 2 version is working better for me and with the htc skin looks awesome.
READ THIS BEFORE INSTALING THE NEW SWYPE! (v3.9)
Original Post
http://forum.ppcgeeks.com/showpost.php?p=1578221&postcount=50
PPCGeeks User said:
I can't believe no one else posted this...
If you overwrite the ModelID with the file provided, you are effectively telling your phone that you are now....a...tmobile hd2.
The swype keyboard has protection in it...only a tmobile hd2 will work with it.
hence why you need the modelid
now here is the kicker...
Say sprint - you run sprint tv. get an error. wanna know why? sprint asks "what phone" and your phone replies "tmobilehd2.
Same thing with prl updates...
I think you get the point...
when you overwrite the modelid, all exchange accounts - gone (sorta). Your 4 digit pin become a lockout - no pin will unlock it.
in short, bad things happen.
And this is why you always provision your phone before you set it up. part of provisioning is setting the modelid...
which is why people on mighty that forgot to provision before seting up exchange need that fix e-mails cab...
any questions?
Click to expand...
Click to collapse
@leepriestenator, if I don't use any provider software, I can install swype without any problem right ?
leepriestenator is correct. Thanks. As our phones are all unlock where we are, the problem is just resetting the mobile provider. It is working fine on my phone, though the phone identity is now T-mobile_Leo.
Having said that, it is a much improved version over the one in Samsung.
Hi everyone;
I am having trouble and had no choice but to ask for advice as i cant seem to find the solution!
I bought an HD7 off ebay UK. The phone was originally on O2 but the seller unlocked and unbranded it and sent it to me without testing its features!
Now it wont make phone calls, wont send texts, wont load IE! When i click on Phone tile, it goes back to main screen!
I dont know the original ROM details but the seller updated it to NODO update:
v7.0.7390.0 with Radio Radio_5.52.09.16_22.33a.50.10U
I am on 3 network! It does go online using SurfCube browser. It does send a text to a number but it wont allow me to read the ones i recieve!
He says it was working fine with him. But not working on 3 network! I also tried the Virgin sim card he left in it and it wasnt working with it either!
Could anyone help me update it to a proper firmware that would work with 3 network? I dont mind having 3UK branded rom... as long as it works, i am fine but i prefer non branded... with copy paste function if possible...
Please help...
Thanks...
I'd have a look in the device forum: http://forum.xda-developers.com/forumdisplay.php?f=783
If you don't get a fix for it then you could always dispute the transaction through PayPal...
I did look through the developer page but because i am new to this i am not sure if i can just use any rom to change the firmware! And it is rather complicated!
The question is, since i have v7.0.7390.0 with Radio Radio_5.52.09.16_22.33a.50.10U
can i replace it with any rom or does it have to be compatible with the current rom?
Thanks...
there was a rom posted on wmpoweruser.com
I have seen all of these before. This is what happen when someone select the wrong language in the ChevronWP7 Updater (for example English International instead of English United States).
The only way to fix this is with a ROM flash.
HEY
i see the mango update is starting to go live for people and after looking at microsoft site its shows in the uk that o2 are givng out the update.
my question is i have a unlocked htc 7 pro currently using a t-mobile sim can i take this out use my partners o2 sim to see if i can get the update then once updated transfer back to my t-mobile sim?
thanks for any help with this.
did you try to force the update with the zune software (the link is in this forum on a different thread). It worked for my phone and doesn't really use my carrier's network (since it relies on disabling your network connection during the upgrade check). It might work for you without doing anything else.
Agree with last post. If in doubt, force it
Sent from my 7 Pro T7576 using XDA Windows Phone 7 App
If you're too lazy to search for the link, here it is: http://www.wpcentral.com/force-mango-update-early-through-zune-software
I had to repeat the steps a bunch of times to get it right, but it works fine
But take care, this will probably re-lock your phone, I had no problem with this because I already have an AppHub student account, so I can officially unlock it again
But I'm still facing some problems because students are only allowed 3 sideloaded apps, and since this number is smaller than 300, this means that the phone will be Interop-locked (this is explained here http://forum.xda-developers.com/showthread.php?t=1265321), so I can't open any code that use native libraries, so I'm unable to edit the registry to increase MaximumUnsignedApps :S
thanks i found the force link lastnight. got it all to work first time so easy was great thank you for the info.
Hello! I just got an unlocked at&t surround phone for christmas. I use simple mobile from t-mobile. The phone makes calls and sends texts but will not connect with the 3g internet or send MMS. I have already been through older posts here looking for an answer. everyone talks about an app in the marketplace called connection setup. I have seached the htc market place and the general marketplace and i cannot find it. Is there any other way? or am i possibly not looking in the right place?
Any help you can give me is welcome! if i cant fix the phone i will have to sell it and i dont want to I love it!
thank you!!
Stephanie_m said:
Hello! I just got an unlocked at&t surround phone for christmas. I use simple mobile from t-mobile. The phone makes calls and sends texts but will not connect with the 3g internet or send MMS. I have already been through older posts here looking for an answer. everyone talks about an app in the marketplace called connection setup. I have seached the htc market place and the general marketplace and i cannot find it. Is there any other way? or am i possibly not looking in the right place?
Any help you can give me is welcome! if i cant fix the phone i will have to sell it and i dont want to I love it!
thank you!!
Click to expand...
Click to collapse
You won't be able to connect to 3G on that phone running T-Mobile. They use different 3g bands and it is hard coded into the hardware. As for mms you need to make sure your apn is correct
So it will only work with AT&T?
Stephanie_m said:
So it will only work with AT&T?
Click to expand...
Click to collapse
Yup or one of the carriers outside the US that use the same bands
happy new year
For all people "HAPPY NEW YEAR 2012"
Custom ROM for HTC Mondrian (Surround)
I have tried using the custom ROMs by DFT and Ansar, but the Intrinsic ROM seems to be the best. It has 7.10.7740.16 version and Internet Sharing. TouchExplorer and Registry Editor work on it. I have only two issues - TouchExperience is throwing an unhandled exception error and i am not able to update to 7.10.8107.79 through Zune.
An update - i didn't want to continue using a ROM which doesn't allow updates, so i tried Ansar's RUU_Surround_Cingular_US_4.03.502.01_Radio_5.69.09.05a_22.50.50.21U_NT_Mango_7720 again.
Again, Zune did not show the 7740 and 8107 updates, but i was able to install them using WP7+Update+Cab+Sender.
So i finally have what i was looking for - an unlocked phone which can be upgraded to tha latest os version.
Almost ideal, except for one key ingredient missing - Internet Connection Sharing. I've tried DiagProvXMLv0.91_IS and it has resulted in the internet sharing option showing under Settings. However, i get an error msg 'Internet sharing isn't enabled yet' when i try to turn on the feature.
Hoping that Ansar will read this post and provide a solution soon!