Have 2 phones samsung S8 plus android 7 Nougat , every one have an issues tooooo confused
# G955u , succes flashing combination and can't flashing the Rom untill the phone is dead can't open it again , and now im mood HS-USB QDloader 9008 =====> I'm still confused with that issue , i not found the qualcomm files for S8 plus G955u .
# G955N , Failed while flashing comination , get error while used Odin and octoplus box
I think that problem because should enable USB Debugging Mode , But i dont know how to Enable it , and the phone is locked even I tried Headset phone ( *#0808# )
Plzzzzz HEEEEEEELP for any Solution Guys:crying:
Don't buy stolen phones
Sent from my [device_name] using XDA-Developers Legacy app
Related
Hey guys. can i have some kind of feed back from the people who know about this problem . i have rooted galaxy tab 2 10.1 att 3g +wifi . everything was working jus fine until i flashed recovery switcher from here: http://forum.xda-developers.com/showthread.php?t=2676180 . after i installed it i then tried to flash the TWRP recovery . when aked to reboot my tab never came back on instead my computer recognize my tab as Qualcomm HS-USB QDLoader 9008 (COM7) . I cant get Download mode neither Recovery mode its like completely dead now.
here are some info of my tab:
SGH-497 At&t
4.1.2 JB
CWM recovery v6.0.2.3
Your tab is not listed in this link , you goofed up, better start writing to Santa for a new tablet .
Your tab is not a P5113, two different tabs. 10" yes, but different ROMs and operating systems. Its like flashing a Samsung phone with a Motorola ROM, all you get is a brick.
That's why you have to read op's carefully.
Pp.
Yes, like @PanchoPlanet told: AT&T have different hardware, seems like a hardbrick.
If you can't get into downloadmode nobody can't help, you need to send it to repair center.
Send from OnePlus One using Tapatalk
So this isn't something I can fix on my own ? This is the first time I screw up my device. There is noway possible for me to get Odin to recognize it ? Not sure if there is anyone in my country that can fix this :/
Probably cheaper to purchase a new tablet. ( and leave it stock ) .
Sorry about your lose. ?
Pp.
mkeeoma said:
So this isn't something I can fix on my own ? This is the first time I screw up my device. There is noway possible for me to get Odin to recognize it ? Not sure if there is anyone in my country that can fix this :/
Click to expand...
Click to collapse
Nope you can't fix it on your own. There are several variants of the Galaxy Tab 2. Wifi only which is 5113, 5110 and 5100 the latter two are different in that the 5100 has a modem like a phone and the 5110 is like the WiFi only but it doesn't have an IR(infrared) similar to a TV remote.
Flashing the wrong firmware for your device in most cases makes it unusable and an expensive brick. In some cases you can possibly find a jtag service which gives you the option of someone else reverting the bootloader back to a working version, it's a repair service in which they have to go into the device and manually edit the motherboard. Sadly this service is not available for all devices, your better off getting another one at this point
From my CM11 S3
2i tried to install TWRP recovery via flashify when i reboot the phone it shows
Your device didn't start up successfully Use the Verizon Software Repair Assistant to repair your phone
my phone model is SM-G920F !!
and the rom installed is SM-G920F so it doesn't contain the Verizon Software Repair Assistant
i can't find the S6 version in the internet
i still can access to odin mode but it shows SM-G920V
and i got a 'FAIL' everytime..
pleeease help me ..:crying::crying::crying:
Since model shows SM-G920F moving to International S6 Q&A.
Hi....
It's about my Samsung Galaxy S6 live demo which i bought some 6 months ago. It was working fine as a G920F. I could make calls, use whatsapp everything.In short, it was a full featured galaxy s6. At that time time i was noob. I didn't know anything about rooting-flashing. I thought retailer has sold me just a rooted phone that's why my software is not updating. I went for custom upgrade, started with super user full unroot, nothing happened. I rebooted and at once device started boot loop and was stuck. I tried everything but nothing helped. I saw a forum
" https://forum.xda-developers.com/ga...er-thread-guides-firmwares-t3267738?nocache=1 "
It helped me in knowing it was a demo unit and guided to flash it to stock and then to g920 F but after doing everything whatever it said disabling retail mode updating software in stock demo firmware, I can't flash G920F rom. Whenever I flash via odin it passes but stucks on Samsung live demo screen and on opening recovery mode says "Dm-verity verification failed.. check drk first " and else there is nothing...I am stuck on logo screen :crying:
My s6 was on Android 5.0.2
Firmware was G920FXWU2B0G8
Please help! I am crying :'( I bought it expensive... :"( ... Please help....
ayazbugti21 said:
Hi....
It's about my Samsung Galaxy S6 live demo which i bought some 6 months ago. It was working fine as a G920F. I could make calls, use whatsapp everything.In short, it was a full featured galaxy s6. At that time time i was noob. I didn't know anything about rooting-flashing. I thought retailer has sold me just a rooted phone that's why my software is not updating. I went for custom upgrade, started with super user full unroot, nothing happened. I rebooted and at once device started boot loop and was stuck. I tried everything but nothing helped. I saw a forum
" https://forum.xda-developers.com/ga...er-thread-guides-firmwares-t3267738?nocache=1 "
It helped me in knowing it was a demo unit and guided to flash it to stock and then to g920 F but after doing everything whatever it said disabling retail mode updating software in stock demo firmware, I can't flash G920F rom. Whenever I flash via odin it passes but stucks on Samsung live demo screen and on opening recovery mode says "Dm-verity verification failed.. check drk first " and else there is nothing...I am stuck on logo screen :crying:
My s6 was on Android 5.0.2
Firmware was G920FXWU2B0G8
Please help! I am crying :'( I bought it expensive... :"( ... Please help....
Click to expand...
Click to collapse
DM verity verification failure happens when your bootloader detects that there have been modifications made to the device that it deems to be unsafe.
Your 2 options are:
1) find the correct original firmware to flash via Odin and hope it works.
Or
2) let Samsung repair or replace the device.
Sent from my SM-S903VL using Tapatalk
Droidriven said:
DM verity verification failure happens when your bootloader detects that there have been modifications made to the device that it deems to be unsafe.
Your 2 options are:
1) find the correct original firmware to flash via Odin and hope it works.
Or
2) let Samsung repair or replace the device.
Sent from my SM-S903VL using Tapatalk
Click to expand...
Click to collapse
What could be the correct original firmware for a demo version?
Also the boot screen even after flashing shows same galaxy logo witha live demo unt written on it...
Is there a way to bypass dm-verity verification? Somehow block the bootloader from detecting modification?
Please help... :"(
ayazbugti21 said:
What could be the correct original firmware for a demo version?
Also the boot screen even after flashing shows same galaxy logo witha live demo unt written on it...
Is there a way to bypass dm-verity verification? Somehow block the bootloader from detecting modification?
Please help... :"(
Click to expand...
Click to collapse
No, there's no way to trick the bootloader.
Try this thread
https://forum.xda-developers.com/galaxy-s6/general/g920x-master-thread-guides-firmwares-t3267738
Sent from my SM-S903VL using Tapatalk
As the title says i brick my phone samsung j7pro (sm-j730g/ds).. i tried rooting my phone
but i followed the wrong guide(stupid me) its for nougat and not for oreo8.1(my phone) and
when i restarted it (like on the video guide) im stuck in logo screen with “only official binaries can be flashed”.
And the worst is that when it restarted after i rooted it, it locked the USB DEBUGGING & OEM again.
-I tried flashing stock ROM using odin3 but it always fails..
-i tried samsung smart switch but it says "unsupported device"
Hope someone can help me.. or give me links to similar case coz i cant seem to find one..
smart switch
MrEckz said:
As the title says i soft brick my phone samsung j7pro sm-j730g/ds.. i tried rooting my phone and then when it restarted im stuck in logo screen with “only official binaries can be flashed”. And the worst is that when it restarted after i rooted it, it locked the USB DEBUGGING & OEM again.
I tried flashing stock ROM using odin3 but it always fails..
So now im stucked at logo screen.. i cant access my phone to unlock oem and usb debugging coz it wont reboot.. i can only go to download mode but i dont know what to do next..
Hope someone can help me.. or give me links to similar case coz i cant seem to find one..
Click to expand...
Click to collapse
you can try emergency recovery on smart switch on your PC !
peter couniaz said:
you can try emergency recovery on smart switch on your PC !
Click to expand...
Click to collapse
I already tried that but it says “unsupported device”
Any other way to fix my phone?
hello every one,
this phone has a sim locked it says invalid sim card enter pin code so i tried the pin code provided by the current SIM provider and its wrong so after googling i found that my dads phone was locked to UAE network so i want to remove that but when i tried to flash TWRP , odin couldnt find the phone and using shell also couldn't find the phone , i have the drivers installed as i could root and flash on my note 3
anyone can tell me a guide to remove the sim lock ?
i removed it about 2 years ago with z3x samsung pro tool but when i tried now it says modem not found and when i connect the phone through usb its stuck in charging mode i cant change that mode so can't even connect smart switch to backup data .
thanks for the help.
hello guys;
i have solved that issue what i did was use z3x tool to remove FRP , only thing i could do anyway then i restarted then factory reset from recovery and voila i could use the phone on PC so i unlocked it using z3x
can some mod close this thread thanks .
hello guys;
i have solved that issue what i did was use z3x tool to remove FRP , only thing i could do anyway then i restarted then factory reset from recovery and voila i could use the phone on PC so i unlocked it using z3x
can some mod close this thread thanks .