I Cant Flash my Verykool s5028 Bolt. Failed: uart send error. I tested different firmware but no result.
(i flashed Custom rom. after i want to get Offical stock rom. then this problem came out.)
Hi, First of all you will need to remove the battery from your verykool phone to turn it off for about 30 seconds. Now Insert battry and Turn on the phone and Check.
Reinstall USB drivers, try with different USB Port
Try Current version of Research Download tool
Still not working? Then we have to Flash Stock Rom again with Fresh Files. (Download new Stock rom and Smart phone Flash Tool)
pliz, share the firmware from verykool s5028 i need that rom
Related
Hi,I did flash "CM-9.1.1.Final-hehappy-p500" and everthing was fine..
after I did flash "aokp-palace-build-6" and it did work...
<Finally ---- I did flash "S3-Evolution-v2-p500" and my device went into a boot loop after install animation..
until battery went out last night..
So I decided to install Stock Rom with KDZ and V10a Version... id did install
everything in emergency mode and after reboot id did show "an anmiation i should close back cover!?"
so i decided to flash it with LGMPDP like described under http://forum.xda-developers.com/showthread.php?t=1140862
same here after reboot stock rom is showing close back cover...
And if i install CWM and another room.... its installing the rom and installing even apps and starting em and then bootloop !
WHAT COULD I TRY NEXT ?
sorry for my low english please help me
I could not charge my battery anymore+++ is there no way to flash it with cable attached for power source ? or istnt that the problem ?
Hello,
I have a chines smartphone named Alps AW880. It uses an MT6577 chipset. I was trying to instal CWM on it which failed because of the signature verification. I used SP flash tool and that worked fine but everytime the phone tries to boot into recovery, it turns black and restart. I tried this tens of times got frustrated and formatted whole flash I don't have my stock ROM or recovery and have no idea which custom recovery will work. The phone is still detected on SP flash tool and I'm able to flash recovery.img but it doesn't work. Now the phone is not turning on at all.
I need help please can this be unbricked?
Plz anyone help me
I was downgrading my unite 2 from kitkat to jellybean
it was successfully flashed
But after flash there was no response by device I.e. No boot logo no recovery no charging notification but device is detected by my pc
But whenever m going to flash it it's showing draim failed 4032
Plz help frndz I trye. Many versions of sp flash tool many firmware but the error is same plz help me out
Make sure that you are trying to flash are exact stock firmware.
If it is so, try formatting your phone. (Make sure that don’t format the boot-loader before flashing it.)
Try changing the usb cable, or try changing the usb port in which you are connecting.
If all of these methods fails, try this method:
1) download the "SP Flash Tool V5.1352.01"
2) select the scatter file from your original rom
3) go to "options" in the flash tool>options>connections>battery>select (W/O)battery
4) now go back and click on download and after that connect ur phone WITHOUT BATTERY to pc via usb cable
and then just wait for few min. till the flashing over......
and after flashing disconnect phone from pc and then just start the phone..........
Try and report your points if you succeed. It might help others in future
hit the thanks button if i helped :good:
Guys I m trying to flash stock rom through odin
But everytime fail message comes.
I have enabled oem unlock and usb debugging too.
First I flashed this firmware downloaded from the website
http://samsung-updates.com/device/?id=SM-J710FN
But it gets fail whenever I flash.
Plz guide me what to do????
I have Qmobile i5(a mediatek phone) with removable battery and It does not connect with pc. Its condition is as follow
It is stuck in boot loop(Stuck at logo).
Its usb port charges the phone but does not connect with pc.
It has a stock recovery 3e
I have tried following
I had the usb port replaced.
I have another mediatek phone and it connect with pc and i flashed a rom on it using sp flash tool so drivers are not the problem and usb cable is also working.
I downloaded stock rom from http://www.mediafire.com/file/ap84anotcyaugdo/Qmobile_i5_MT6582_4.2.zip and put the zip file in sdcard to install it using stock recovery but it says installation aborted(I know this rom file is for sp flash tool).
So i need help
Where can i find stock rom which can be flashed with stock recovery 3e.