My leeco le 2 x526 was working fine until i flashed a custom rom on it. After flashing cutom rom it was working fine but then the custom rom update came and i did that after which leeco le 2 starts and then switches off automatically after loading leeco logo. I have clean wiped the phone and installed several different custom rom's but problem still persists.
I have also tried to flash stock rom via QFIL tool with stock rom images for leeco le 2 x526 which clean wipes the phone and installs new recovery and bootloader and stock rom. After which when i started the phone leeco le 2 logo came and then phone shows the basic setup like language selection and then it again switches off and reboots. and keeps rebooting like this.
I had this problem too just flash with fastboot the latest stock system,recovery,boot,cache, and your phone will start
Sent from my iPhone using Tapatalk
AnonDz said:
I had this problem too just flash with fastboot the latest stock system,recovery,boot,cache, and your phone will start
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
I too was thinking about doing this but i don't know all the fastboot commands which needs to be execute while flashing leeco le 2. I had done flashing via fastboot on MI3 but i thought leeco le 2 needs to execute different commands for fastboot flashing. So if you can help me with the fastboot commands which i need to execute for fastboot flashing of leeco le 2 x526. It will be much appreciated.
anandsingh2903 said:
I too was thinking about doing this but i don't know all the fastboot commands which needs to be execute while flashing leeco le 2. I had done flashing via fastboot on MI3 but i thought leeco le 2 needs to execute different commands for fastboot flashing. So if you can help me with the fastboot commands which i need to execute for fastboot flashing of leeco le 2 x526. It will be much appreciated.
Click to expand...
Click to collapse
Enter fastboot with vol down i think and
Fastboot flash boot boot.img
Fastboot flash recovery recovery.img
Fastboot flash system system.img
Fastboot flash cache cache.img
And reboot your phone manually don’t fastboot reboot especially if you unlocked the bootloader
Sent from my iPhone using Tapatalk
AnonDz said:
Enter fastboot with vol down i think and
Fastboot flash boot boot.img
Fastboot flash recovery recovery.img
Fastboot flash system system.img
Fastboot flash cache cache.img
And reboot your phone manually don’t fastboot reboot especially if you unlocked the bootloader
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Well did this but now my phone is completely bricked. Now it is not even going to recovery mode neither fastboot mode nor EDL mode. Nothing is happing in my phone now just red LED blinking every time i connect my phone to power source.
The battery is low and do you have the correct firmware for sure
anandsingh2903 said:
Well did this but now my phone is completely bricked. Now it is not even going to recovery mode neither fastboot mode nor EDL mode. Nothing is happing in my phone now just red LED blinking every time i connect my phone to power source.
Click to expand...
Click to collapse
Ok now i have managed to reboot my phone by pressing power button really long. but the problem still persist and phone switches off automatically as soon as the basic setup comes on the phone after switching on.
I’ll check if i still have the firmware and send you the link
AnonDz said:
The battery is low and do you have the correct firmware for sure
Click to expand...
Click to collapse
Yes i have the correct firmware for leeco le 2 x526 as sparse india images. Phone is booting now but problem still persist it reboots automatically as soon as it comes on the basic setup after switching on.
Check the battery If not try to download another firmware update
Sent from my iPhone using Tapatalk
AnonDz said:
Did you check the battery
Sent from my iPhone using Tapatalk
---------- Post added at 04:48 PM ---------- Previous post was at 04:48 PM ----------
If not try to download another firmware update
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Yes i checked the battery it is fine as such phone is working in recovery and fastboot and i have also tried updated firmware as marshmallow was the latest updated firmware available for leeco le 2 x526. but it still didn't work
Did you flash the userdata
Sent from my iPhone using Tapatalk
---------- Post added at 04:51 PM ---------- Previous post was at 04:51 PM ----------
Fastboot flash userdata userdata.img
Sent from my iPhone using Tapatalk
AnonDz said:
Did you flash the userdata
Sent from my iPhone using Tapatalk
---------- Post added at 04:51 PM ---------- Previous post was at 04:51 PM ----------
Fastboot flash userdata userdata.img
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Actually there are many files for userdata and system like system_1, system_2 upto system_63 and same for userdata.
Just userdata or userdata1
Sent from my iPhone using Tapatalk
i am having the same problem.
anandsingh2903 said:
Ok now i have managed to reboot my phone by pressing power button really long. but the problem still persist and phone switches off automatically as soon as the basic setup comes on the phone after switching on.
Click to expand...
Click to collapse
bro please help me if you found the solution to the problem. I having the EXACT same problem as you.
if you will be able to help me out of this problem I will buy you a beer.
Related
I think I hard bricked my one plus one when updating to cm12.
It boots to the oneplus one logo, and stays there until the battery drains.
I have unlocked the bootloader and tried flashing factory images, using fastboot but the result is always the same, the oneplus one logo.
Anyone enountered a similar problem and how did you sort it out
briankariu said:
I think I hard bricked my one plus one when updating to cm12.
It boots to the oneplus one logo, and stays there until the battery drains.
I have unlocked the bootloader and tried flashing factory images, using fastboot but the result is always the same, the oneplus one logo.
Anyone enountered a similar problem and how did you sort it out
Click to expand...
Click to collapse
That's not hard brick, download this, unzip it, run flash-all.bat when in fastboot mode, it will be fixed
You don't have to let the battery drain, hold power button for 5 seconds or so and it will reboot. When hold power+volume + and connect the phone to PC and run flash-all.bat
Sent from my A0001 using Tapatalk
briankariu said:
I think I hard bricked my one plus one when updating to cm12.
It boots to the oneplus one logo, and stays there until the battery drains.
I have unlocked the bootloader and tried flashing factory images, using fastboot but the result is always the same, the oneplus one logo.
Anyone enountered a similar problem and how did you sort it out
Click to expand...
Click to collapse
@MZO is correct. Its not a hard brick if you're able to get into fastboot mode. Use the zip package that was linked to and flash through fastboot. Goof luck.
MZO said:
That's not hard brick, download this, unzip it, run flash-all.bat when in fastboot mode, it will be fixed
You don't have to let the battery drain, hold power button for 5 seconds or so and it will reboot. When hold power+volume + and connect the phone to PC and run flash-all.bat
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
Hey will this work for me? When I turn my phone on , after the +1 Logo the screen goes black (but is still backlit and LEDs are turned on). The same thing happens when I try and access recovery mode. Fastboot mode however, still works. Would your link fix my phone too by any chance?
MZO said:
That's not hard brick, download this, unzip it, run flash-all.bat when in fastboot mode, it will be fixed
You don't have to let the battery drain, hold power button for 5 seconds or so and it will reboot. When hold power+volume + and connect the phone to PC and run flash-all.bat
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
Thanks. Let me give this a shot. will report in a few minutes
Pup_Skag said:
Hey will this work for me? When I turn my phone on , after the +1 Logo the screen goes black (but is still backlit and LEDs are turned on). The same thing happens when I try and access recovery mode. Fastboot mode however, still works. Would your link fix my phone too by any chance?
Click to expand...
Click to collapse
Yea it will
Sent from my A0001 using Tapatalk
---------- Post added at 08:58 PM ---------- Previous post was at 08:58 PM ----------
briankariu said:
Thanks. Let me give this a shot. will report in a few minutes
Click to expand...
Click to collapse
Great!
Sent from my A0001 using Tapatalk
MZO said:
Yea it will
Sent from my A0001 using Tapatalk
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
Thanks! I'll give it a go now
MZO said:
That's not hard brick, download this, unzip it, run flash-all.bat when in fastboot mode, it will be fixed
You don't have to let the battery drain, hold power button for 5 seconds or so and it will reboot. When hold power+volume + and connect the phone to PC and run flash-all.bat
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
Nope. Not working. Just finished flashing and I am still stuck on the oneplus logo.
briankariu said:
Nope. Not working. Just finished flashing and I am still stuck on the oneplus logo.
Click to expand...
Click to collapse
Type fastboot -w
THANK the post if I deserve
MZO said:
Type fastboot -w
THANK the post if I deserve
Click to expand...
Click to collapse
Flashed again just to be double sure. I also ran the fastboot -w command, but I am still booting to the oneplus one logo.
Could it be the PC I am using because I am on windows 10-however, all the commands return that they have ran successfully....
briankariu said:
Flashed again just to be double sure. I also ran the fastboot -w command, but I am still booting to the oneplus one logo.
Could it be the PC I am using because I am on windows 10-however, all the commands return that they have ran successfully....
Click to expand...
Click to collapse
Woah. Seems pretty unusual. Try
fastboot erase boot
fastboot erase system
fastboot flash boot boot.img
fastboot flash system system.img
Never saw this issue before. :/
THANK the post if I deserve
I had somewhat of the same issue some time back and ended up flashing stock cm11s to fix it. There is a thread here on xda, but I have this link bookmarked, https://www.reddit.com/r/oneplus/comments/31sf0x/guide_how_to_return_from_oxygenos_to_stock_cm11s . Won't hurt to try flashing cm11s and see.
MZO said:
Woah. Seems pretty unusual. Try
fastboot erase boot
fastboot erase system
fastboot flash boot boot.img
fastboot flash system system.img
Never saw this issue before. :/
THANK the post if I deserve
Click to expand...
Click to collapse
Hey, When I try and run 'flash-all' it just opens for a millisecond and then just closes straight away. I've tried running as administrator and it made no difference. Any ideas what I could do to fix this?
Pup_Skag said:
Hey, When I try and run 'flash-all' it just opens for a millisecond and then just closes straight away. I've tried running as administrator and it made no difference. Any ideas what I could do to fix this?
Click to expand...
Click to collapse
Hold shift, right click and open command prompt there, then in it write flash-all.bat it will show you output
THANK the post if I deserve
Pup_Skag said:
Hey, When I try and run 'flash-all' it just opens for a millisecond and then just closes straight away. I've tried running as administrator and it made no difference. Any ideas what I could do to fix this?
Click to expand...
Click to collapse
Try and do a manual flash, the batch file may not work properly. Follow guide I just posted above for fastboot commands.
kenboyles72 said:
Try and do a manual flash, the batch file may not work properly. Follow guide I just posted above for fastboot commands.
Click to expand...
Click to collapse
Do manually flash each file in that folder individually then?
---------- Post added at 06:28 PM ---------- Previous post was at 06:22 PM ----------
MZO said:
Hold shift, right click and open command prompt there, then in it write flash-all.bat it will show you output
THANK the post if I deserve
Click to expand...
Click to collapse
kenboyles72 said:
Try and do a manual flash, the batch file may not work properly. Follow guide I just posted above for fastboot commands.
Click to expand...
Click to collapse
Wait, Think I got it! Thanks guys
Pup_Skag said:
Do manually flash each file in that folder individually then?
---------- Post added at 06:28 PM ---------- Previous post was at 06:22 PM ----------
Wait, Think I got it! Thanks guys
Click to expand...
Click to collapse
Ah I'm happy it did Enjoy flashing 13! (though it sucks meh)
THANK the post if I deserve
hello everyone.
hey mangtas...
pressing three buttons seems not working.
I try to : - this
fastboot flash system system.img
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash cache cache.img
Have trouble after flashing it says sucess, try to fastboot reboot, still get the message your device is booting now. freeze
I´ve heard some people said it work after this Stock rom flash..= L29- B180
I don´t get it.
Is this the only solution? I mean I can only enter Fastboot.
Sent from my HUAWEI NXT-L29
Cheng Qiang said:
hello everyone.
hey mangtas...
pressing three buttons seems not working.
I try to : - this
fastboot flash system system.img
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash cache cache.img
Have trouble after flashing it says sucess, try to fastboot reboot, still get the message your device is booting now. freeze
I´ve heard some people said it work after this Stock rom flash..= L29- B180
I don´t get it.
Is this the only solution? I mean I can only enter Fastboot.
Sent from my HUAWEI NXT-L29
Click to expand...
Click to collapse
Did you checked if you flashed the right firmware for your variant?
Sent from my HUAWEI NXT-L29 using XDA-Developers mobile app
yes of course. = C432...B180 international
after it says flashing sucesss try to reboot.... thats strange.
What I didn.t mention is I can.t erase the old boot,system, and recovery.img which says
FaiL - Command not allowed.
is there something wrong? windows 10?
http://www.huaweiblog.de/downloads/huawei-mate-8-offizielle-firmware-b180-wird-verteilt/
please check link. thats from these source.
Ok lets try this, unlock the bootloader again using SRKtool Huawei all instruction is inside the software. after sucessfully unlocking the loader install the stock recovery img its also inside the SRKtool..then thats the time try to flash the stock firmware. just give it a try
.
Mangtas, can you check the control panel what device name when you connect your huawei?
- When I try to type Adb devices it doesn.t found ..
Might it be the reason?
Cheng Qiang said:
Mangtas, can you check the control panel what device name when you connect your huawei?
- When I try to type Adb devices it doesn.t found ..
Might it be the reason?
Click to expand...
Click to collapse
My device name is written in some kind of numbers and letters.
Sent from my HUAWEI NXT-L29 using XDA-Developers mobile app
---------- Post added at 07:20 PM ---------- Previous post was at 07:19 PM ----------
Cheng Qiang said:
Mangtas, can you check the control panel what device name when you connect your huawei?
- When I try to type Adb devices it doesn.t found ..
Might it be the reason?
Click to expand...
Click to collapse
Can you do fastboot mode with your mate 8?
Sent from my HUAWEI NXT-L29 using XDA-Developers mobile app
Mangtas_666 said:
My device name is written in some kind of numbers and letters.
Sent from my HUAWEI NXT-L29 using XDA-Developers mobile app
---------- Post added at 07:20 PM ---------- Previous post was at 07:19 PM ----------
Can you do fastboot mode with your mate 8?
Sent from my HUAWEI NXT-L29 using XDA-Developers mobile app
Click to expand...
Click to collapse
Of course I can do fastboot as long Bootlader is not locked. If this not working I will relock and going to send to repair.
=> Can you type adb devices? Is that normal if it is not found? I.m on Windows 10...
I was thinking about why I can.t enter Recovery mode even with the buttons.
So this morning when I used my phone it crashed, then I tried to boot up the phone but nothing showed up but when I plugged in my phone it displayed the Google logo for a few seconds then it powered off. I didn't rooted or unlocked the phone.
If I were to reset it my phone Google Authenticator codes will be wiped.
Can anyone please help me with this urgently?
Go to Fastboot Mode (Power + Volume Down), and plug your Nexus 5 to a PC, unlock your bootloader and then follow this guide (Method 2):
https://forum.xda-developers.com/google-nexus-5/general/tutorial-how-to-flash-factory-image-t2513701
PD: You can try just wiping cache on recovery but I'm not sure if it will make you Nexus 5 boot, but you can try and if it doesn't work you should try flashing stock ROM.
Greetings
I've got a similar issue. My Nexus 5 is stuck with Google logo. I have successfully flashed stock ROM (6.0.1) following the guide reported in this forum - method 2.
At the very beginning it booted successfully, but after some hours it got stuck with the google logo. I have tried several times to flash the stock ROM again successfully, but never booted again.
I don't know what the problem is.
Can some of you please help me?
Alee1449 said:
So this morning when I used my phone it crashed, then I tried to boot up the phone but nothing showed up but when I plugged in my phone it displayed the Google logo for a few seconds then it powered off. I didn't rooted or unlocked the phone.
If I were to reset it my phone Google Authenticator codes will be wiped.
Can anyone please help me with this urgently?
Click to expand...
Click to collapse
Unlocking the bootloader will wipe all data and apps from the phone.
Does the phone charge when connected to a USB charger?
echelon70 said:
I've got a similar issue. My Nexus 5 is stuck with Google logo. I have successfully flashed stock ROM (6.0.1) following the guide reported in this forum - method 2.
At the very beginning it booted successfully, but after some hours it got stuck with the google logo. I have tried several times to flash the stock ROM again successfully, but never booted again.
I don't know what the problem is.
Can some of you please help me?
Click to expand...
Click to collapse
Try flashing a stock Kit Kat ROM.
Thanks for your quick help!
audit13 said:
Unlocking the bootloader will wipe all data and apps from the phone.
The bootloader is already unlocked and I have wiped all data and apps from the phone following the guide.
Does the phone charge when connected to a USB charger?
Yes, it does
Try flashing a stock Kit Kat ROM.
Click to expand...
Click to collapse
I'll try that, too.
Just for a curiosity. Why a stock Kit Kat ROM?
---------- Post added at 03:08 PM ---------- Previous post was at 02:35 PM ----------
I flashed a Kit Kat ROM stock, but my Nexus 5 is still stuck with Google logo.
I think there's nothing to do.. I suppose it's a hardware issue, then
echelon70 said:
Thanks for your quick help!
I'll try that, too.
Just for a curiosity. Why a stock Kit Kat ROM?
---------- Post added at 03:08 PM ---------- Previous post was at 02:35 PM ----------
I flashed a Kit Kat ROM stock, but my Nexus 5 is still stuck with Google logo.
I think there's nothing to do.. I suppose it's a hardware issue, then
Click to expand...
Click to collapse
Some Nexus 5 phone's develop a problem with the internal memory whereby it can boot a kit kat ROM but, with MM or LP, the screens stays at the spinning dots and doesn't progress beyond that screen.
When flashing a stock ROM, I manually flash each partition:
fastboot flash bootloader bootloader.img
fastboot reboot-bootloader
fastboot flash radio radio.img
fastboot reboot-bootloader
fastboot flash system system.img
fastboot reboot-bootloader
fastboot flash userdata userdata.img
fastboot flash recovery recovery.img
fastboot flash boot boot.img
fastboot flash cache cache.img
fastboot reboot
audit13 said:
Some Nexus 5 phone's develop a problem with the internal memory whereby it can boot a kit kat ROM but, with MM or LP, the screens stays at the spinning dots and doesn't progress beyond that screen.
When flashing a stock ROM, I manually flash each partition:
fastboot flash bootloader bootloader.img
fastboot reboot-bootloader
fastboot flash radio radio.img
fastboot reboot-bootloader
fastboot flash system system.img
fastboot reboot-bootloader
fastboot flash userdata userdata.img
fastboot flash recovery recovery.img
fastboot flash boot boot.img
fastboot flash cache cache.img
fastboot reboot
Click to expand...
Click to collapse
I followed your instructions step by step, but didn't work unfortunately.
I really believe it's a hardware problem.
However, thank you for your quick help!
I'm giving in....
echelon70 said:
I followed your instructions step by step, but didn't work unfortunately.
I really believe it's a hardware problem.
However, thank you for your quick help!
I'm giving in....
Click to expand...
Click to collapse
If everything else is fine, try to find a cheap N5 with a working motherboard and smashed screen. I have done this a few times. The N5 is old by cellphone standards and I got them cheap. You just have to be patient.
Krizthian said:
Go to Fastboot Mode (Power + Volume Down), and plug your Nexus 5 to a PC, unlock your bootloader and then follow this guide (Method 2):
https://forum.xda-developers.com/google-nexus-5/general/tutorial-how-to-flash-factory-image-t2513701
PD: You can try just wiping cache on recovery but I'm not sure if it will make you Nexus 5 boot, but you can try and if it doesn't work you should try flashing stock ROM.
Greetings
Click to expand...
Click to collapse
It shows the bootloader but in a few seconds it does the same thing :/
Check your power button and Google it.
So after trying to root my device I successfully unlocked my device and installed twrp and magisk through twrp but after trying to reboot into the system, it doesn't. Every time i try to reboot into the system, it just goes into a loading "G" and boots right back into recovery or twrp.
adrianherndez304 said:
So after trying to root my device I successfully unlocked my device and installed twrp and magisk through twrp but after trying to reboot into the system, it doesn't. Every time i try to reboot into the system, it just goes into a loading "G" and boots right back into recovery or twrp.
Click to expand...
Click to collapse
Flash the stock boot.img to both slots. That should get you running again. Then I'd boot twrp then install magisk. I wouldn't try to flash twrp but if you do make sure you flash that before magisk. Then reboot to twrp and flash magisk.
Sent from my [device_name] using XDA-Developers Legacy app
I'm literally in the same situation. Bootloader unlocked but only able to boot to TWRP. Tried running the "flash-all" from the Google stock image but it doesn't run. Now i'm lost and my new phone is not at its best.
Tarush13 said:
I'm literally in the same situation. Bootloader unlocked but only able to boot to TWRP. Tried running the "flash-all" from the Google stock image but it doesn't run. Now i'm lost and my new phone is not at its best.
Click to expand...
Click to collapse
Make sure you've updated your sdk platform tools.
Sent from my [device_name] using XDA-Developers Legacy app
Just re-downloaded from Google, still doesn't run. Also, not getting "no valid slot to boot" when I flash the boot.img file
---------- Post added at 09:59 PM ---------- Previous post was at 09:38 PM ----------
update: got the flash-all file to work, but now the touchscreen does not work when I am trying to set it up. There is no twrp and I cannot do anything except boot to fastboot or stare at the setup screen
Tarush13 said:
Just re-downloaded from Google, still doesn't run. Also, not getting "no valid slot to boot" when I flash the boot.img file
---------- Post added at 09:59 PM ---------- Previous post was at 09:38 PM ----------
update: got the flash-all file to work, but now the touchscreen does not work when I am trying to set it up. There is no twrp and I cannot do anything except boot to fastboot or stare at the setup screen
Click to expand...
Click to collapse
Are using the commands
fastboot flash boot_a boot.img
And
fastboot flash boot_b boot.img
There are two slots you need to flash the image to.
Sent from my [device_name] using XDA-Developers Legacy app
Hi, I got it to boot, but now I cannot use the touchscreen. Any ways to resolve this?
jd1639 said:
Are using the commands
fastboot flash boot_a boot.img
And
fastboot flash boot_b boot.img
There are two slots you need to flash the image to.
Sent from my [device_name] using XDA-Developers Legacy app
Click to expand...
Click to collapse
Tarush13 said:
Hi, I got it to boot, but now I cannot use the touchscreen. Any ways to resolve this?
Click to expand...
Click to collapse
Is the touch screen issue with twrp or when you boot the device itself? I know some people have had an issue with the touch screen not working in twrp.
Sent from my [device_name] using XDA-Developers Legacy app
Yes, it is when I boot the device. When I try to click on "start" to begin the initial device setup, nothing happens. None of the touch input is being received by the device.
jd1639 said:
Is the touch screen issue with twrp or when you boot the device itself? I know some people have had an issue with the touch screen not working in twrp.
Sent from my [device_name] using XDA-Developers Legacy app
Click to expand...
Click to collapse
Tarush13 said:
Yes, it is when I boot the device. When I try to click on "start" to begin the initial device setup, nothing happens. None of the touch input is being received by the device.
Click to expand...
Click to collapse
I'm not sure why it's doing that. But, if I was faced with that issue I'd first flash the system.img to both slots. And if that didn't work I'd try flashing the vendor.img.
Sent from my [device_name] using XDA-Developers Legacy app
flashed vendor.img and still cant use the touch screen? Touch input is definitely not being recorded. Any other ideas?
jd1639 said:
I'm not sure why it's doing that. But, if I was faced with that issue I'd first flash the system.img to both slots. And if that didn't work I'd try flashing the vendor.img.
Sent from my [device_name] using XDA-Developers Legacy app
Click to expand...
Click to collapse
---------- Post added at 11:01 PM ---------- Previous post was at 10:54 PM ----------
Just to clarify, I flashed system to both slots and then vendor. Neither seemed to work.
Tarush13 said:
flashed vendor.img and still cant use the touch screen? Touch input is definitely not being recorded. Any other ideas?
Click to expand...
Click to collapse
Tarush13 said:
flashed vendor.img and still cant use the touch screen? Touch input is definitely not being recorded. Any other ideas?
---------- Post added at 11:01 PM ---------- Previous post was at 10:54 PM ----------
Just to clarify, I flashed system to both slots and then vendor. Neither seemed to work.
Click to expand...
Click to collapse
Have you tried a factory reset on the stock recovery?
Sent from my [device_name] using XDA-Developers Legacy app
I can't get to the stock recovery. When I tried to go there from fastboot, I got a "no command" error. Basically all I can do is go to fastboot mode and either reboot to the start screen where the touch input does not work or power off. I also don't see a recovery file in the source image I downloaded from google.
jd1639 said:
Have you tried a factory reset on the stock recovery?
Sent from my [device_name] using XDA-Developers Legacy app
Click to expand...
Click to collapse
Tarush13 said:
I can't get to the stock recovery. When I tried to go there from fastboot, I got a "no command" error. Basically all I can do is go to fastboot mode and either reboot to the start screen where the touch input does not work or power off. I also don't see a recovery file in the source image I downloaded from google.
Click to expand...
Click to collapse
The boot.img contains the stock recovery as well as the kernel. Flash that.
Sent from my [device_name] using XDA-Developers Legacy app
Tarush13 said:
I can't get to the stock recovery. When I tried to go there from fastboot, I got a "no command" error. Basically all I can do is go to fastboot mode and either reboot to the start screen where the touch input does not work or power off. I also don't see a recovery file in the source image I downloaded from google.
Click to expand...
Click to collapse
The no command thing is normal. When you see that screen, push and hold the power button and then, while still holding the power button, press volume up once. That will get you into recovery.
boot.img flashed, factory reset with stock recovery, still can't use the touch screen. This is beyond anything I've encountered in rooting. No clue why this is happening.
I've been trying to set up twrp all day, but after almost every attempt, I gave up. If i put official and last twrp, the phone goes to bootloop and has to be flashed through MiFlash global ROM, after some custom twrp or Peter's twrp, nothing happens, if i try to enter recovery mode after some old twrp's, the phone automatically goes to bootloop.
What am I doing wrong, friends? Plz help.
Unlocked? I know stupid question but...
Fastboot, flash recovery, don't reboot and but ur finger on vol+ and power button?
What for steps u made and adb plus driver? Maybe some can help u.
joke19 said:
Unlocked? I know stupid question but...
Fastboot, flash recovery, don't reboot and but ur finger on vol+ and power button?
What for steps u made and adb plus driver? Maybe some can help u.
Click to expand...
Click to collapse
Yeah, ofc it was unlocked))) and I tried manually reboot device, but no effect.
For steps, I tried installed various fastboot files and many Many different twrp. But ADB plus, what's is that?
Thank you anyway
Do this and report back
1.Flash miui through mi flash
2.DONT BOOT INTO SYSTEM
3.Flash peters twrp through fastboot
4.Boot into recovery by using hardware keys....DONT USE fastboot reboot recovery command
5.Boot into system
24likan said:
Do this and report back
1.Flash miui through mi flash
2.DONT BOOT INTO SYSTEM
3.Flash peters twrp through fastboot
4.Boot into recovery by using hardware keys....DONT USE fastboot reboot recovery command
5.Boot into system
Click to expand...
Click to collapse
Yeah, but how i can flash twrp and then noot into recovery, if device after installing do autostart into system?
When starts booting into system.... Use hardware keys to boot into fastboot instead of booting into system... Do this very carefully
24likan said:
When starts booting into system.... Use hardware keys to boot into fastboot instead of booting into system... Do this very carefully
Click to expand...
Click to collapse
You mean use keys for booting into recovery, not to fastboot?
lastpixel said:
You mean use keys for booting into recovery, not to fastboot?
Click to expand...
Click to collapse
Bro don't confuse yourself.... Your aim is to not boot into system unless u fls recovery via fastboot... Read what i have posted and try it
24likan said:
Bro don't confuse yourself.... Your aim is to not boot into system unless u fls recovery via fastboot... Read what i have posted and try it
Click to expand...
Click to collapse
So, i did like yoy wrote in instruction, when was first reboot, i pressed button to enter into fastboot, then flashed twrp, then again restarted for finishing process of instalation. When all is completed, tried entereing into recovery, there's not twrp, just factory recovery was.
So doesn't work this one.
lastpixel said:
So, i did like yoy wrote in instruction, when was first reboot, i pressed button to enter into fastboot, then flashed twrp, then again restarted for finishing process of instalation. When all is completed, tried entereing into recovery, there's not twrp, just factory recovery was.
So doesn't work this one.
Click to expand...
Click to collapse
No first reboot. After flashing push direct the button for the recovery menu.
Or
fastboot boot recovery.img
Then flash the recovery.zip with the booted not flashed recovery.img
You are doing it wrong mate.... Anyways can you post the output of this command "fastboot oem device-info"... Read understand and do again.... Don't reboot or boot until u flash recovery.... Can't repeat everytime bro... You have to use your brain
joke19 said:
No first reboot. After flashing push direct the button for the recovery menu.
Or
fastboot boot recovery.img
Then flash the recovery.zip with the booted not flashed recovery.img
Click to expand...
Click to collapse
After flashing what? Rom? I don't get you man. After flashing Rom with Miflash, when device do restart, i need flashing twrp or enter to recovery, but for what need go to recovery if it still not there. Sorry for my noobs questions
https://aubykhan.wordpress.com/2013...t-into-twrp-or-cwm-recovery-without-flashing/
U flash ur recovery.img in fastboot, right.
Then don't reboot ur phone. Hold in fastboot the volume+ and power still to reboot and maybe ur phone go in ur twrp recovery
---------- Post added at 09:53 AM ---------- Previous post was at 09:52 AM ----------
lastpixel said:
After flashing what? Rom? I don't get you man. After flashing Rom with Miflash, when device do restart, i need flashing twrp or enter to recovery, but for what need go to recovery if it still not there. Sorry for my noobs questions
Click to expand...
Click to collapse
Not a rom ur recovery.img zip for flashing in custom recovery
24likan said:
You are doing it wrong mate.... Anyways can you post the output of this command "fastboot oem device-info"... Read understand and do again.... Don't reboot or boot until u flash recovery.... Can't repeat everytime bro... You have to use your brain
Click to expand...
Click to collapse
Code:
(bootloader) Device unlocked: true
(bootloader) Device critical unlocked: true
(bootloader) Charger screen enabled: false
OKAY [ 0.009s]
Finished. Total time: 0.014s
I can't get this "Don't reboot until flash recovery", but how, if device do this automatically, i tried holding power + vol-, got into fastboot, then flashed ur twrp, and then again reboot to system.
joke19 said:
https://aubykhan.wordpress.com/2013...t-into-twrp-or-cwm-recovery-without-flashing/
U flash ur recovery.img in fastboot, right.
Then don't reboot ur phone. Hold in fastboot the volume+ and power still to reboot and maybe ur phone go in ur twrp recovery
---------- Post added at 09:53 AM ---------- Previous post was at 09:52 AM ----------
Not a rom ur recovery.img zip for flashing in custom recovery
Click to expand...
Click to collapse
As i said before, i did it many times. There's happen or bootloop, come this logo funny bunny, or sometime it load to factory recovery.
I suppose, maybe something bad with adb drivers? Coz i didn't update it since i have RN5... But in console seems everything is ok, the device is connected and see.
U test the boot method?
---------- Post added at 10:11 AM ---------- Previous post was at 10:07 AM ----------
lastpixel said:
As i said before, i did it many times. There's happen or bootloop, come this logo funny bunny, or sometime it load to factory recovery.
I suppose, maybe something bad with adb drivers? Coz i didn't update it since i have RN5... But in console seems everything is ok, the device is connected and see.
Click to expand...
Click to collapse
Right recovery lavender is note 7 and the pro violet
joke19 said:
U test the boot method?
Click to expand...
Click to collapse
Yeah, tried also this
Code:
C:\adb>fastboot boot twrp.img
Sending 'boot.img' (65536 KB) OKAY [ 1.403s]
Booting OKAY [ 0.133s]
Finished. Total time: 1.618s
device is rebooted and now stucked on logo Redmi
joke19 said:
U test the boot method?
---------- Post added at 10:11 AM ---------- Previous post was at 10:07 AM ----------
Right recovery lavender is note 7 and the pro violet
Click to expand...
Click to collapse
I did with twrp from man who give link. Do you have right version?
https://files.orangefox.website/OrangeFox-Stable/
Lavender global and pro violet
---------- Post added at 10:51 AM ---------- Previous post was at 10:21 AM ----------
lastpixel said:
I did with twrp from man who give link. Do you have right version?
Click to expand...
Click to collapse
Now u're quite :laugh:
---------- Post added at 11:33 AM ---------- Previous post was at 10:51 AM ----------
And again not one time
I don't really understand asking you not to rebooting the device until I flash twrp. My steps: If I'm flashing through MiFlash, then the device automatically reboots, I tried to enter fastboot mode at the moment of reboot, and yeah I entered and flashed recovery(at least seems like that), but then when the device rebooted manually , again I see that there is not a custom recovery, maybe I missed something and your devices do not do automatic reboot during the flashing, or your instructions are wrong. Sorry man.