I have the original Sony Smartwatch and there is a watch app for the Endomondo sports tracker available when you install the app on the phone.
I use this for when I go running. However, I have just bought an armband for my phone that I can wear when I run. I won't be able to check distance or start/stop workouts from here, so would like to do it from my Smartwatch.
Problem is, the screen only stays on a few seconds! During a run, it's hard to wake it up doing all the crap you have to do (double tapping the screen, despite what Sony says, rarely seems to work) It would be ideal if I could get the screen to stay on whilst the Endomondo watch app was up and running. Is there any way around this problem?
Thanks
Hi!
It may look strange, but I really would like to keep the screen of the gear watch always on, at the lowest possible light setting and that when the watch detects the wrist movement, the light settings come back to the normal one.
I'm sure this will add up to very low battrey life. But if I can get a day like this, it would be great!
Thanks!
I wanted this at first, because coming from the Pebble -it's just so convenient having the screen accessible all the time and the gesture doesn't always register.My idea was that it should just be a very minimal screen in terms of pixel use to leverage the power saving qualities of the AMOLED tech. Problem is, the AMOLED screen is also known for burn-in on the phones, so I'm afraid even if we set this it would damage the watch screen in the long run (and I would be ok if I only got a day of use also, as I'm fine charging every night anyways).
There is a watchface called "AlwaysWatch" in the Samsung Gear store that's supposed to give you an always on face until the battery runs out. Problem is, it runs as an app instead of the default face and of course I'm afraid to try it due to the burn-in issue. I sent the developer a note saying make the watchface a small, but still legible digital font instead of analog and float the time around the screen periodically would get around this burn-in risk, we'll see if he adds the option.
Thanks for the info on this app (I also have a pebble ).
In order not to burn the screen, it would be preferable to change the watchface form time to time and put it in the lowet light possible...
FixB said:
Thanks for the info on this app (I also have a pebble ).
In order not to burn the screen, it would be preferable to change the watchface form time to time and put it in the lowet light possible...
Click to expand...
Click to collapse
One of my disappointments besides the flaky gesture wake up is that there doesn't seem to be an ambient light sensor to trigger screen brightness changes. I would have thought that would be a no brainer for a device such as this by now.
rEVOLVE said:
One of my disappointments besides the flaky gesture wake up is that there doesn't seem to be an ambient light sensor to trigger screen brightness changes. I would have thought that would be a no brainer for a device such as this by now.
Click to expand...
Click to collapse
Maybe the camera light sensor in the Gear 2 could be used for that purpose?
Hello,
the missing sleep tracking ist terrible, it seems the last update changed nothing.
Is there an app allready?
Is there a possiblity to do a night profile (without gesture for screen on)?
Greetings, vastl
For sleep tracking I really suggest G'Night app. I have it for about a month and it's really good. Worth the 3 dollars it cost. Today the app got an update and added monitoring you're heartbeat and improve stat and graphs. The only minus is that you can't export the data out of the watch.
Sleep as android is great if you don't mind the battery drain and know how to install it. Its significantly better than gnight and its only $2 more. There's tons of settings and the data is stored on your phone so you can see much much more information.
As for a "night" profile, do not disturb turns off gestures and vibrations. Drag down from your watch face and tap the middle button. Just keep in mind you have to enable and disable it manually. There's no automation, which kinda sucks.
Agree it sux big time it is not implemented in an official way.
This is a functionality every smart-band out there have!
Is there not a app that uses just your watch? I don't want to lay my phone on my bed. I actually just want to track how often I wake up like on the fitbit.
I heard the makers of sleepbot are making an app for S2 Gear also.
mills23 said:
Is there not a app that uses just your watch? I don't want to lay my phone on my bed. I actually just want to track how often I wake up like on the fitbit.
Click to expand...
Click to collapse
That would be. G'night. Just make sure you also turn on airplane mode to get it to work well
Sent from my SM-G930P using XDA-Developers mobile app
I am using DnD mode. Whats difference between both? Airplane doesnt wake up at all?
OK here is my question for those of you doing sleep tracking. When do you charge your watch. Mine had about 40%battery left when I go too bed. Then when I get up there is only about 1 hour where I could charge before I leave for work.
I charge my watch before bedtime. When i wake up i have like between 80-88% battery left. With that i can wear the whole day the watch. At the evening it will be around 40-50%.
Oxizee said:
I am using DnD mode. Whats difference between both? Airplane doesnt wake up at all?
Click to expand...
Click to collapse
Airplane turns off BT, wifi and NFC so your watch is not communicating with your phone. DND just turns off notifications so your phone doesn't light up. I have DND on all the time to save battery. With G'night your phone wakes up briefly when it is taking your pulse
Sent from my SM-G930P using XDA-Developers mobile app
Is there anything that deactivates the rotating bezel, find it does not take much to wake the watch that way when sleeping
Sent from my SM-G935F using XDA-Developers mobile app
Duct tape lol
Sent from my SM-T330NU using XDA-Developers mobile app
I enjoy seeing my sleep tracking data in Samsung S-health. The watch automatically records it, then uploads it automatically when you check S-health.
I saw some people having trouble where their sleep graph wouldn't show, to avoid this let the S2 upload the data, in other words, dont say yes i was asleep during such and such time, because that's your phone, not the watch info.
So apparently on Samsungs official news site , the AOD display has a sensor that will disable the AOD when it's placed inside a pocket or a bag (Why would your watch be in your pocket or bag instead of your wrist?). You would think this would also work if say you're wearing a long sleeve shirt. I have been unable to trigger this via long sleeve shirts and I don't have thin enough clothing to test the pocket, nor do I own a bag to test.
"The device’s 3-inch circular Super AMOLED display has a resolution of 360 x 360. Its 16 million colors, full color Always On Watch continuously shows the time rather than fading to black. The ambient light sensor helps to adjust the brightness of displayed information and works to automatically disable the Always On Watch when users can’t see the screen, such as when the watch is in a pocket or a bag. Users can opt to personalize their Always On Watch with customizable, interactive watch faces."
Who's willing to help me test this feature?
Naturesretard said:
So apparently on Samsungs official news site , the AOD display has a sensor that will disable the AOD when it's placed inside a pocket or a bag (Why would your watch be in your pocket or bag instead of your wrist?). You would think this would also work if say you're wearing a long sleeve shirt. I have been unable to trigger this via long sleeve shirts and I don't have thin enough clothing to test the pocket, nor do I own a bag to test.
"The device’s 3-inch circular Super AMOLED display has a resolution of 360 x 360. Its 16 million colors, full color Always On Watch continuously shows the time rather than fading to black. The ambient light sensor helps to adjust the brightness of displayed information and works to automatically disable the Always On Watch when users can’t see the screen, such as when the watch is in a pocket or a bag. Users can opt to personalize their Always On Watch with customizable, interactive watch faces."
Who's willing to help me test this feature?
Click to expand...
Click to collapse
Someone already posted on the forums about how their AOD wasn't working, and they found out it was because their strap was blocking their wrist from making contact with the sensor. I'm guessing that the heart rate sensor didn't sense a pulse and turned off the screen completely, or some other sensor all together.
Here's the link:
http://forum.xda-developers.com/gear-s3/help/problems-feature-t3507324/page2
My AOD also turns off when the watch determines that I'm sleeping and then requires a security pin.
Sent from my SM-G935P using Tapatalk
optimummind said:
My AOD also turns off when the watch determines that I'm sleeping and then requires a security pin.
Click to expand...
Click to collapse
My AOD works just fine. But it will not turn off when sleeping or covered. It senses my heartbeat just fine. Perhaps my unit is defective? How did you get it to turn it when sleeping, anything special?
Naturesretard said:
My AOD works just fine. But it will not turn off when sleeping or covered. It senses my heartbeat just fine. Perhaps my unit is defective? How did you get it to turn it when sleeping, anything special?
Click to expand...
Click to collapse
Nothing special. My Classic began to track my sleep automatically out of the box. After I wake up, I press a button or rotate the bezel then put in my pin. Shortly afterwards, I get an alert on the watch and it shows in numbers & a graph how long I slept and also shows me how long I was motionless, how long I had a little bit of movement, and how long I was restless.
When the watch is simply covered up by my longsleeve shirt or a jacket, my AOD doesn't turn off.
Sent from my SM-G935P using Tapatalk
It won't turn off AOD with long sleeves, because it knows you're wearing it. It only turns off if it's NOT on your wrist. Or when you're sleeping.
Did anyone install the new PK7 watch update on their Gear S3? Any issues with AOD? Like AOD not working or turning off despite the AOD setting being on?
Sent from my SM-G935P using Tapatalk
I just got my Frontier today, and I came here now looking for answers on the AOD feature i have been hearing about but have not witnessed as of yet... My watch goes completely black every time after about 4 to 5 second of inactivity. Like i said i was coming here now to XDA to find out if this was a config problem or what?? Two things I have seen here that may be an issue for me, 1 - i always wear long sleeve shirts, and 2 - i have always had trouble with the smart watch heart rate monitors getting a good pulse on my wrist. (This is my 5th smartwatch, 4th samsung) I did do all of the updates today when initially using watch. I have been wearing it about 8 hours. Hope this helps.
S1CAR1US said:
I just got my Frontier today, and I came here now looking for answers on the AOD feature i have been hearing about but have not witnessed as of yet... My watch goes completely black every time after about 4 to 5 second of inactivity. Like i said i was coming here now to XDA to find out if this was a config problem or what?? Two things I have seen here that may be an issue for me, 1 - i always wear long sleeve shirts, and 2 - i have always had trouble with the smart watch heart rate monitors getting a good pulse on my wrist. (This is my 5th smartwatch, 4th samsung) I did do all of the updates today when initially using watch. I have been wearing it about 8 hours. Hope this helps.
Click to expand...
Click to collapse
Settings > Style > Always on. Have you turned that on?
Also, it won't work if the watch isn't on your wrist.
Is there a way to increase the brightness of the AOD? Mine is hard to see unless I'm in a fairly dark room.
lyall29 said:
Is there a way to increase the brightness of the AOD? Mine is hard to see unless I'm in a fairly dark room.
Click to expand...
Click to collapse
No, I just kept gesture motion on.
kronium said:
No, I just kept gesture motion on.
Click to expand...
Click to collapse
That's my set up also.
lyall29 said:
Is there a way to increase the brightness of the AOD? Mine is hard to see unless I'm in a fairly dark room.
Click to expand...
Click to collapse
Try Settings, Display, Brightness.
gpmg762 said:
Try Settings, Display, Brightness.
Click to expand...
Click to collapse
Thanks, this does seem to be the only way to make the AOD brighter.
"Samsung Flaunt" is a widget you can install, i installed it on mine (you have to select it from widget once installed) as i found certain faces i have time out into a default (black face white hands and red second hand) i didnt want this, i wanted a face of my selection be it downloaded or a pre-installed face to remain on at all times especially if i go out, if you select the "Frontier" face (pre-installed) and have AOD Turned on you lose very little in quality / dimming when the time out kicks in, with "Samsung Flaunt" you install the widget and this then allows you to have the watch face on for up to 30 mins, However it will eat your battery, but then i can live with day to day charging, I like the idea of going out for a meal or a beer with pals and my face being on, i like the idea of a smart watch simulating a "real" watch look, as we all know there are thousands of faces we can select to show off.
S1CAR1US you can change the time out by going settings/Display/Screen Timeout/ then theres a choice of 15 seconds, 30 seconds, 1 minute or 5 minutes, if you select the desired time out, and go back to your normal face, by clicking your bezel one click left (notifications) and one click right (watch face) your face should remain on for that length of time, if this isn't long enough (wasn't for me) i used the "Samsung Flaunt" widget.
Rgds
Is it possible or not to set automatique disable AOD for exemple every day at 23 h to 07 h ?
[email protected] said:
Is it possible or not to set automatique disable AOD for exemple every day at 23 h to 07 h ?
Click to expand...
Click to collapse
Would be very useful, but it is not possible.
I mean you can't set it in system settings, but it is possible to use a "complication" in Gear Watch Designer.
I designed a couple of watch faces setting a complication to turn off AOD every night, was very simple.
slimsta said:
"Samsung Flaunt" is a widget you can install, i installed it on mine (you have to select it from widget once installed) as i found certain faces i have time out into a default (black face white hands and red second hand) i didnt want this, i wanted a face of my selection be it downloaded or a pre-installed face to remain on at all times especially if i go out, if you select the "Frontier" face (pre-installed) and have AOD Turned on you lose very little in quality / dimming when the time out kicks in, with "Samsung Flaunt" you install the widget and this then allows you to have the watch face on for up to 30 mins, However it will eat your battery, but then i can live with day to day charging, I like the idea of going out for a meal or a beer with pals and my face being on, i like the idea of a smart watch simulating a "real" watch look, as we all know there are thousands of faces we can select to show off.
S1CAR1US you can change the time out by going settings/Display/Screen Timeout/ then theres a choice of 15 seconds, 30 seconds, 1 minute or 5 minutes, if you select the desired time out, and go back to your normal face, by clicking your bezel one click left (notifications) and one click right (watch face) your face should remain on for that length of time, if this isn't long enough (wasn't for me) i used the "Samsung Flaunt" widget.
Rgds
Click to expand...
Click to collapse
Where did u install it from.. Cannot find it in playstore store nor Samsung stire
Sent from my Nexus 6P
I went into samsung gear app/samsung Galaxy apps/searched for flaunt, installed and it should sync to widgets on your s3 gear, hope this helps?
Secret section gear 3
lyall29 said:
thanks, this does seem to be the only way to make the aod brighter.
Click to expand...
Click to collapse
if you guys trying fix all the lil things like brightness and touch and sound go settings_gear info_about device_software version when you infront of this click 5x and that will bring up dialer on there then just press *#0*# from here you can mess with brightness and all sorts of stuff if you figure wat *#0011# will help me out been trying bunch old codes from my s3 s5 days alot work on this lil thing and also if anyone figures out how too turn on dev mode cuz of thizzz pm me thanks....
Stupid question alert... So I have always on, screen time out 30 sec, auto low brightness on, wake up gesture on, gray scale on, and brightness at 2. I'm currently using watch maker's watch face for my own custom design. It has a second hand, but after a short period goes to ambient mode or whatever where the second hand stops moving.
Is there a way to set it to truly always on where the second hand is always moving? A couple of the stock watch faces do that I notice. In the custom watch face I have everything set to always. I'd search more, but don't know what lingo to use. Thanks for the help in advance.
vipfreak said:
Stupid question alert... So I have always on, screen time out 30 sec, auto low brightness on, wake up gesture on, gray scale on, and brightness at 2. I'm currently using watch maker's watch face for my own custom design. It has a second hand, but after a short period goes to ambient mode or whatever where the second hand stops moving.
Is there a way to set it to truly always on where the second hand is always moving? A couple of the stock watch faces do that I notice. In the custom watch face I have everything set to always. I'd search more, but don't know what lingo to use. Thanks for the help in advance.
Click to expand...
Click to collapse
That's all based on the watch face. Don't see that much 3rd party watch face use that but depends on the watch face
zune70 said:
That's all based on the watch face. Don't see that much 3rd party watch face use that but depends on the watch face
Click to expand...
Click to collapse
Oh ok. Ugh... Thanks