Database Info

TouchWiz Rom For Gionee Gpad G2

TouchWiz ROm
Android Version : 4.3
Rom Features: Note 3
Copyrights: DevSkilled
Bug Fixed By : Marian Trinca
First developed For Lenovo A820
Compatible Devices : Walton Primo N1/ Gionee Gpad G2/ Allview P5 Qmax/ GN810
My Review
Trust me this Version is Better than older ones
Requirements
1.Rooted Compatible Device
2.Custom Recovery (T.W.R.P)
3.Download Files
Root Your device by Using Framaroot
Flash TWRP
Installation
*Please Keep A backup of your present Rom
1.Download Touchwiz Essentials.zip From Download Section and extract it
a) Place Viper4Android Folder in root od SD
b) Open Readme.txt for the Touchwiz Rom Download Link.
c) Download
2.Place the zip To root of Your SD Card
3.Reboot Into TWRP Recovery.
4.Go to Wipe >Advance Wipe> mark Davik Cache, Cache, Android Secure, System>Swipe to wipe.
5.Again Reboot Into Recovery.
6.Go To Wipe > Swipe To Factory Reset
7.Reboot Into Recovery.
9.Install>TouchwizRoM.zip
10.Follow Screen
11.When Finished Do WIPE CACHE,DALVIK CACHE
12.Reboot System
13. Now it take around 3min to boot Complete All steps.
14. Then You will See Welcome Screen, Keep Going On Finally You Will See Congratulations Screen
15.Now open Viper4Android Fx App , Select Top Left Key(Menu key)> Then Select Load Profile>Xperia Bass>Headset.
16.Reboot Phone
17.Done Now Enjoy
N.B Back up your Current ROM please before Flashing And Camera Flash Is not Available In This Rom
XDA:DevDB Information
TouchWiz Rom-Gionee Gpad G2, ROM for all devices (see above for details)
Contributors
DevSkilled
ROM OS Version: 4.3.x Jellybean
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Gionee Gpad G2 Device/Similar Rebrand
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: 4.3
Stable Release Date: 2014-07-04
Current Beta Version: 4.2.x
Beta Release Date: 2014-07-01
Created 2014-07-04
Last Updated 2014-07-05

1.5mb custom rom?
DevSkilled said:
TouchWiz ROm
Android Version : 4.3
Rom Features: Note 3
Copyrights: DevSkilled
Bug Fixed By : Marian Trinca
First developed For Lenovo A820
Compatible Devices : Walton Primo N1/ Gionee Gpad G2/ Allview P5 Qmax/ GN810
My Review
Trust me this Version is Better than older ones
Requirements
1.Rooted Compatible Device
2.Custom Recovery (T.W.R.P)
3.Download Files
Root Your device by Using Framaroot
Flash TWRP
Installation
*Please Keep A backup of your present Rom
1.Download Touchwiz Essentials.zip From Download Section and extract it
a) Place Viper4Android Folder in root od SD
b) Open Readme.txt for the Touchwiz Rom Download Link.
c) Download
2.Place the zip To root of Your SD Card
3.Reboot Into TWRP Recovery.
4.Go to Wipe >Advance Wipe> mark Davik Cache, Cache, Android Secure, System>Swipe to wipe.
5.Again Reboot Into Recovery.
6.Go To Wipe > Swipe To Factory Reset
7.Reboot Into Recovery.
9.Install>TouchwizRoM.zip
10.Follow Screen
11.When Finished Do WIPE CACHE,DALVIK CACHE
12.Reboot System
13. Now it take around 3min to boot Complete All steps.
14. Then You will See Welcome Screen, Keep Going On Finally You Will See Congratulations Screen
15.Now open Viper4Android Fx App , Select Top Left Key(Menu key)> Then Select Load Profile>Xperia Bass>Headset.
16.Reboot Phone
17.Done Now Enjoy
N.B Back up your Current ROM please before Flashing And Camera Flash Is not Available In This Rom
XDA:DevDB Information
TouchWiz Rom-Gionee Gpad G2, ROM for all devices (see above for details)
Contributors
DevSkilled
ROM OS Version: 4.3.x Jellybean
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Gionee Gpad G2 Device/Similar Rebrand
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: 4.3
Stable Release Date: 2014-07-04
Current Beta Version: 4.2.x
Beta Release Date: 2014-07-01
Created 2014-07-04
Last Updated 2014-07-05
Click to expand...
Click to collapse
?I already have a viper4androidfx on my fone, do I download another?
You also promised a kitkat for this device
Camera Flash not available? You mean camera is not working?
What bugs did you notice on the rom

That is not Rom Zip
haykay2005 said:
?I already have a viper4androidfx on my fone, do I download another?
You also promised a kitkat for this device
Camera Flash not available? You mean camera is not working?
What bugs did you notice on the rom
Click to expand...
Click to collapse
Please Read : 1. a/b
Extract zip and open readme , you will find download link there.
And Kitkat Doge mod will be upoad tomorroe
Kitkat Pure Xperia IS ready And will be published Today

This rom is very beautiful and smooth. But front camera not working. Please make a fix patch...

Same problem is front camera not work with flash problem fix this
And
map
local
Not work
Unfortunately stopped app solve please
But thanks provide DevSkilledBug Fixed By : Marian Trinca new rom service 4 gionee

Fix please... Thank you very much !!!
https://www.youtube.com/watch?v=18PTh14Layc

Pure Xperia Rom For Gionee Gpad G2

Pure Xperia Z2 GG2 ROm
Android Version : 4.4.2
Rom Features: Pure Xperia
Copyrights: DevSkilled
WIFI Fixed By : Marian Trinca
First developed For Lenovo A820
Compatible Devices : Walton Primo N1/ Gionee Gpad G2/ Allview P5 Qmax/Xolo GN810
My Review
Trust me this Version is Better than older ones
Requirements
1.Rooted Compatible Device
2.Custom Recovery (T.W.R.P)
3.Download Files
Root Your device by Using Framaroot
Flash TWRP
Installation
*Please Keep A backup of your present Rom
1.Download Pure Xperia Essentials.zip From Download Section and extract it
a) Place Viper4Android Folder and Update zip in root of SD
b) Open Readme.txt for the Touchwiz Rom Download Link.
c) Download
2.Place the zip To root of Your SD Card
3.Reboot Into TWRP Recovery.
4.Go to Wipe >Advance Wipe> mark Davik Cache, Cache, Android Secure, System>Swipe to wipe.
5.Again Reboot Into Recovery.
6.Go To Wipe > Swipe To Factory Reset
7.Reboot Into Recovery.
9.Install>XperiaRoM.zip
10.Follow Screen
11.When Finished Do WIPE CACHE,DALVIK CACHE
12.Reboot System
13. Now it take around 3min to boot Complete All steps.
14. Then You will See Welcome Screen, Keep Going On Finally You Will See Congratulations Screen
15. Now reboot into recovery and install update
16.Now open Viper4Android Fx App , Select Top Left Key(Menu key)> Then Select Load Profile>Xperia Bass>Headset.
17.Reboot Phone
18.Done Now Enjoy
For CAmera Fix Flash PXZ2_Patch from Downloads​N.B Back up your Current ROM please before Flashing And Camera Flash Is not Available In This Rom
XDA:DevDB Information
PURE XPERIA Gionee GPad G2, ROM for all devices (see above for details)
Contributors
DevSkilled, bgos10
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Gionee Gpad G2 Device/Similar Rebrand
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: 4.4.2
Stable Release Date: 2014-07-05
Current Beta Version: 4.2.2
Beta Release Date: 2014-04-01
Created 2014-07-05
Last Updated 2014-09-20

steps error?
Please check step1b and step 9, am seeing Touchwiz Rom. This is pure Xperia procedure. Any mix up?

bug free rom
very stable and sweet rom but my battery takes longer to charge. any solution?

deleted...

Change Charger
haykay2005 said:
very stable and sweet rom but my battery takes longer to charge. any solution?
Click to expand...
Click to collapse
Use Samsung Charger or Sony Charger

i was excited to know that there was an upgrade available for my device. and this ROM is more beautifull than i anticipated. Great Work.
it is 4.2.2 taking up more RAM than stock version i feel. i posted a feature request hope that you can add that. and also i dont know where is the USB debugging option in this ROM.

can not download any app from playstore.
DevSkilled said:
Pure Xperia Z2 GG2 ROm
Android Version : 4.4.2
Rom Features: Pure Xperia
Copyrights: DevSkilled
WIFI Fixed By : Marian Trinca
First developed For Lenovo A820
Compatible Devices : Walton Primo N1/ Gionee Gpad G2/ Allview P5 Qmax/Xolo GN810
My Review
Trust me this Version is Better than older ones
Requirements
1.Rooted Compatible Device
2.Custom Recovery (T.W.R.P)
3.Download Files
Root Your device by Using Framaroot
Flash TWRP
Installation
*Please Keep A backup of your present Rom
1.Download Pure Xperia Essentials.zip From Download Section and extract it
a) Place Viper4Android Folder and Update zip in root of SD
b) Open Readme.txt for the Touchwiz Rom Download Link.
c) Download
2.Place the zip To root of Your SD Card
3.Reboot Into TWRP Recovery.
4.Go to Wipe >Advance Wipe> mark Davik Cache, Cache, Android Secure, System>Swipe to wipe.
5.Again Reboot Into Recovery.
6.Go To Wipe > Swipe To Factory Reset
7.Reboot Into Recovery.
9.Install>XperiaRoM.zip
10.Follow Screen
11.When Finished Do WIPE CACHE,DALVIK CACHE
12.Reboot System
13. Now it take around 3min to boot Complete All steps.
14. Then You will See Welcome Screen, Keep Going On Finally You Will See Congratulations Screen
15. Now reboot into recovery and install update
16.Now open Viper4Android Fx App , Select Top Left Key(Menu key)> Then Select Load Profile>Xperia Bass>Headset.
17.Reboot Phone
18.Done Now Enjoy
For CAmera Fix Flash PXZ2_Patch from Downloads​N.B Back up your Current ROM please before Flashing And Camera Flash Is not Available In This Rom
XDA:DevDB Information
PURE XPERIA Gionee GPad G2, ROM for all devices (see above for details)
Contributors
DevSkilled, bgos10
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Gionee Gpad G2 Device/Similar Rebrand
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: 4.4.2
Stable Release Date: 2014-07-05
Current Beta Version: 4.2.2
Beta Release Date: 2014-04-01
Created 2014-07-05
Last Updated 2014-09-20
Click to expand...
Click to collapse
whenever i try downloading an app from google play the error pops up. "can not b downloaded due to an error. (error retrieving information from server. [RPC:S-7AEC-7]) please help

The development of the mate 7 AOSP android 6

I am still working on the thread
After the development of the AOSP for the mate 7 hit the wall I made this thread to gather the developers efforts to make this dream come to life
What we have here is a astock rom for the mate 7 all that it need is some rebooting or crashing bugs only lefted all we need is agood devoleper or two and some time for them and it can be completed
I stepped the first step to learn development but not even a close to give help
Any one can ask for help from a developer or can fix some bugs will be a great help
We have 4 places or more to ask for developers help in
Xda site and Huawei club site in both Huawei mate 7 and honor 6 section
The original thread link is down below
https://forum.xda-developers.com/mate-7/orig-development/rom-aosp-ascend-mate7-t3465656
Introduction
This project was done by gabry3795, acbka and the TheLolageMann
Source Code: https://github.com/mt7-dev/
Please note that it's a beta release and it's not intended for daily use because some important part is not working and it's unstable. So flash only if you want to test and contribute to this project.
Images
You can find images of the first build here and for current builds under the Screenshot Tab.​
Installation Instruction
obviously your bootloader must be unlocked
Extract the .7z archive
Update your stock Huawei firmware to the latest version B571 - Android 6.0
Flash a custom recovery, I suggest you this twrp
Do a Factory Reset from recovery: Wipe » Swipe for Factory Reset
Boot in bootloader mode - Plug USB cable to your pc, hold Volume Down and Power button pressed. When a blank screen appears release them
From pc, by using fastboot, flash boot and system images
Code:
fastboot flash boot boot.img
fastboot flash system system.img
Reboot!
The easiest way to flash via fastboot is to
1- put the two files system and boot in any folder in your pc
2- when you are in the folder click on shift from the keyboard and while holding it right click anywhere
3- chose " open command Window here"
4- write "fastboot" and click inter
5- if you can see your device in the list you can flash the rom now by writing the two codes up one by one
6- after you finish you can start your PHONE now
Changelog
You can find changelogs here on github, every file will be named as the version released with many informations about the release.​
Downloads
Again the release section of github repo. for MT7-L09 , it works on MT7-TI10 BUT with more crashes and worked with honor 6 after some prop editing to the cpu clock speed
MT7-L09 and MT7-TL10
Releases page, direct links below:
[2016/09/20] v0.1.0beta - Changelog | Download
[2016/10/05] v0.2.0beta - Changelog | Download
[2016/10/05] v0.2.2beta - Changelog | Download
V 0.2.2 is the latest with the GBs fix by TheLolageMann
Note for this version: After installing GApps you have to enable all permissions to them by going to Settings -> Apps -> Select Gapps and Google Play Services -> Permissions -> Enable all permissions.
XDA:DevDB Information
AOSPfortheMate7, ROM for the Huawei Ascend Mate 7
Contributors
gabry3795, acbka And TheLolageMann
Source Code: https://github.com/mt7-dev/
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
Based On: AOSP
Version Information
Status: Beta
Current Beta Version: v0.2.2
Beta Release Date: 2016-09-20
Created 2016-09-20
Last Updated 12-02-2017

mhmedahmed1996 said:
I am still working on the thread
After the development of the AOSP for the mate 7 hit the wall I made this thread to gather the developers efforts to make this dream come to life
What we have here is a astock rom for the mate 7 all that it need is some rebooting or crashing bugs only lefted all we need is agood devoleper or two and some time for them and it can be completed
I stepped the first step to learn development but not even a close to give help
The original thread link is down below
https://forum.xda-developers.com/mate-7/orig-development/rom-aosp-ascend-mate7-t3465656
Introduction
This project was done by gabry3795, acbka and the TheLolageMann
Source Code:https://github.com/mt7-dev/
Please note that it's a beta release and it's not intended for daily use because some important part is not working and it's unstable. So flash only if you want to test and contribute to this project.
Images
You can find images of the first build here and for current builds under the Screenshot Tab.
Installation Instruction
obviously your bootloader must be unlocked
Extract the .7z archive
Update your stock Huawei firmware to the latest version B571 - Android 6.0
Flash a custom recovery, I suggest you this twrp
Do a Factory Reset from recovery: Wipe » Swipe for Factory Reset
Boot in bootloader mode - Plug USB cable to your pc, hold Volume Down and Power button pressed. When a blank screen appears release them
From pc, by using fastboot, flash boot and system images
Reboot!
The easiest way to flash via fastboot is to
1- put the two files system and boot in any folder in your pc
2- when you are in the folder click on shift from the keyboard and while holding it right click anywhere
3- chose " open command Window here"
4- write "fastboot" and click inter
5- if you can see your device in the list you can flash the rom now by writing the two codes up one by one
6- after you finish you can start your PHONE now
Changelog
You can find changelogs here on github, every file will be named as the version released with many informations about the release.
Downloads
Again the release section of github repo. for MT7-L09 , it works on MT7-TI10 BUT with more crashes and worked with honor 6 after some prop editing to the cpu clock speed
MT7-L09 and MT7-TL10
Releases page, direct links below:
[2016/09/20] v0.1.0beta - Changelog | Download
[2016/10/05] v0.2.0beta - Changelog | Download
[2016/10/05] v0.2.2beta - Changelog | Download
V 0.2.2 is the latest with the GBs fix by TheLolageMann
Note for this version: After installing GApps you have to enable all permissions to them by going to Settings -> Apps -> Select Gapps and Google Play Services -> Permissions -> Enable all permissions.
XDA:DevDB Information
AOSPfortheMate7, ROM for the Huawei Ascend Mate 7
Contributors
gabry3795, acbka And TheLolageMann
Source Code:https://github.com/mt7-dev/
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
Based On: AOSP
Version Information
Status: Beta
Current Beta Version: v0.2.2
Beta Release Date: 2016-09-20
Created 2016-09-20
Last Updated 12-02-2017
Click to expand...
Click to collapse
Thanks :good::good::good:

fazi2015 said:
Thanks :good::good::good:
Click to expand...
Click to collapse
Any one have any news about it can write it here
We can update the post with every news

Would it be possible for me to get a bug list for the current status of the project. Although I don't have the device I can definitely see if I could take a look at it. No promises though

There's still a way to get AOSP to the mate 7.
Last resort: Find a dev and pay him. On reddit r/android you could find devs. Perhaps if everybidy whos interested pays a minor fee, the dev is willing to help us.
https://www.reddit.com/r/Android/comments/69o2t8/huawei_mate_7_aosp_devs_wanted/
---------- Post added at 11:19 PM ---------- Previous post was at 11:12 PM ----------
WildfireDEV said:
Would it be possible for me to get a bug list for the current status of the project. Although I don't have the device I can definitely see if I could take a look at it. No promises though
Click to expand...
Click to collapse
First of all, thanks.
Second, There's a document on github which mentions bugs and you can find people mentioning bugs in the old thread: https://forum.xda-developers.com/mate-7/orig-development/rom-aosp-ascend-mate7-t3465656/page22

---

[8.1] MIUI Oreo stable sGSI

Thread instructions will improve over time so
Read this OP carefully & understand pliz
Intro:
U can flash this (only system partition) on any treble enabled device
(other files are Device specific only ie. land here )
Code:
Disclaimer:
Custom modded ROM so you know the risks.
- angry Gf/wife, thermonuclear war
-getting fired cuz alarm didn't rang .
We not responsible
Fail-safe:
Alright as measure
1. take nandroid backup
2. Keep a recovery zip of official stable stock ROM
3. Flash it through Twrp, Redwolf, Orange Fox,
Black ,white, yellow, etc etc custom recovery
or PC, laptop : Mi flash. Flash Fast boot ROM
Working :
• everything
• unrooted version
•
•
•
~ Removed Apps
• Browser, file manager, email,scanner, music all Google things
(cuz updating them automatically moves to internal storage so why bother)
• removed boot animation so it will show " android " instead
(which means no boot animation file found but also means ROM is booted)
update
•
Not Working, Bugs:
• viLTE
What's new:
• steps are same download zips. They are twrp system back up.
Restore them
* Screenshots uploaded
Steps, How to, Flashing guide :
1. Flash any treble supported recovery
2. Mount system + cust/vendor partitions.
3. wipe normal + wipe vendor
4. Place
• system
• boot
• vendor
Into recovery backup folder & restore
5. Reboot (Boots in 10 min)
Credit:
everyone who contribute
On android open source code + fork
Sources:
• telegram Jayant 222
DOWNLOADS Links:
1. Standard TWRP
• Orange fox
• Batik
2. backup for land
• boot 13 MB
• system 999 MB
• vendor 132 MB
My link: Google Drive
Original link: Google Drive
Me :
Just thread updater :')
Imma not associated with DEVs. All Port r theirs just did slim and little change
Took backup uploaded that's all
Connect via telegram (4 queries)
Abhi_Rajgor group
Abhijeet_Rajgor channel
XDA:DevDB Information
8.1 MIUI Oreo ROM, ROM for the Xiaomi Redmi 3S
Contributors
Abhijeet Rajgor, Jayant222
ROM OS Version: 8.x Oreo
Version Information
Status: No Longer Updated
Created 2018-09-20
Last Updated 2019-08-18

Isn't this rom from tele group t.me/funtouchosp ?
Gapps include ???

Wow... Its really good to see developers trying to port miui roms over newer android versions.. Thank u all bros

ashok weird said:
Wow... Its really good to see developers trying to port miui roms over newer android versions.. Thank u all bros
Click to expand...
Click to collapse
He is owner of this port XD

Yes
esteh said:
Isn't this rom from tele group t.me/funtouchosp ?
Gapps include ???
Click to expand...
Click to collapse
All is his and MiUi am just as u know thread updater . Google app included

Thank you for ..
JSPiRiT said:
He is owner of this port XD
Click to expand...
Click to collapse
I did not know only have this redmi phone so i update through this.. pardon for not including everything all though am trying to help people as yours.

download link????

Some ss please.

link?

Some ss
Link download : t.me/funtouchosp

esteh said:
Some ss
Link download : t.me/funtouchosp
Click to expand...
Click to collapse
no link in tg.
wait

wangyiling said:
no link in tg.
wait
Click to expand...
Click to collapse
Its on pinned message

This should be in treble enabled device development also u should have taken permission of developer of this ROM before posting

sairam60 said:
This should be in treble enabled device development also u should have taken permission of developer of this ROM before posting
Click to expand...
Click to collapse
First thing it will work only on redmi 3s LAND
It won't work on other device ok.
Well if u really ask the real developer the MIUI which constructed whole ROM. Then the one u r referring need to ask for permission .. MIUI apps aren't open-source which is used in this ROM. But I don' wanna contradiction.
No one can stop using any ROM to anyone , me , you ,him or any other..
I got the ROM now even if it doesn't update it still better and i have other friend who can help me fork but i don't have resources so i just helping this way..
People tend to see other ways.. tell me really
What i get from this thread ?
(Don't care for thanks or whatever)so.
Not just telling u but in all..
Just enjoy everyone who is passionate and creating ... Customised ROMs.

Someone plz give direct download link

1. write who is creator of this port
2. sources are wrong

Hey, I am am planning to flash this tomorrow first thing. In the link provided in the OP, the 'system v2' folder says to download from the porter until you upload there. I have downloaded the files from @fxsheep from the original port thread. Can I just add the 'boot+modem+vendor' files provided by you to the original files by @fxsheep and restore through twrp?
I am new to this GSI thing so need to clear this out before I take any further steps.

That's the purpose
Krishna1204 said:
Hey, I am am planning to flash this tomorrow first thing. In the link provided in the OP, the 'system v2' folder says to download from the porter until you upload there. I have downloaded the files from @fxsheep from the original port thread. Can I just add the 'boot+modem+vendor' files provided by you to the original files by @fxsheep and restore through twrp?
I am new to this GSI thing so need to clear this out before I take any further steps.
Click to expand...
Click to collapse
Well, in simply way u need to
1. Flash trouble supported recovery (preferably Orange Fox)
2. Mount vendor
3. Flash any trouble enabled 8.1 Oreo ROM of your device (to get vendor)
4. Flash his backup.
This is the common way for all devices
But i tried to make for our , my redmi 3s prime
Choice is yours
Do whatever you like.. (telling in general)

Abhijeet Rajgor said:
Intro:
Miroom.ru mix Miui 10 Oreo 8.1 based sGSI
This version work only with land (Redmi 3s/Prime/x)
For ORIGINAL go to Porter's thread.
Ported
: Redmi 6 pro Chinese (arm64)
VoLTE ,viLTE works.
Fail-safe
Alright as measure
1. take nandroid backup
2. Keep a recovery zip of official stable stock ROM
3. Flash it through Twrp, Redwolf, Orange Fox, Black ,white, yellow, etc etc custom recovery
or PC: Mi flash
Bugs:
1. Can't turn of Find device or remove miui cloud.
steps:
(For user who r on stock or Miui based 6.0, 7.0 or any rom (non-terbel) )
1. Flash Orange fox latest recovery
2. Mount all partitions (so no worries)
*Place this files inside backup folder of recovery
3. Its #twrp backup so Restore
•system
•boot
•vendor
•modem
√ Reboot
4. There will be MI account lock page on startup.
Credit:
@miui + .ru
@fxsheep
@erfanoabdi
@JSPiRiT
@creativchic
@URARTU1
nd everyone who else contribute
On android open source code+fork
Source:
https://forum.xda-developers.com/pr...evelopment/8-1-miui10-project-treble-t3840198
t.me/funtouchosp
DOWNLOADS Links:
1. Boot vendor modem
2. system
https://drive.google.com/open?id=1L_aHBF79XCHRWgHyOZDLg-MVKp37hzZ_
ME:
Just thread updater
~ Temporary thread
I don't getting anything other than investing my time creating this so don't think i getting some rewards back from this thread or something precious or whatever u think its more. less help to people like me etc etc
So if u understood efforts very much thank you if not its ok go ahead request delete this thread. (Don't hit thank button)
Thanks
XDA:DevDB Information
8.1 MiUi 10 port sGSI Treble image, ROM for the Xiaomi Redmi 3S
Contributors
Abhijeet Rajgor, JSPiRiT
ROM OS Version: 2.3.x Gingerbread
Version Information
Status: Testing
Created 2018-09-20
Last Updated 2018-09-20
Click to expand...
Click to collapse
ROM OS Gingerbread

Abhijeet Rajgor said:
Well, in simply way u need to
1. Flash trouble supported recovery (preferably Orange Fox)
2. Mount vendor
3. Flash any trouble enabled 8.1 Oreo ROM of your device (to get vendor)
4. Flash his backup.
This is the common way for all devices
But i tried to make for our , my redmi 3s prime
Choice is yours
Do whatever you like.. (telling in general)
Click to expand...
Click to collapse
I got the procedure from the original thread. What I wanted to confirm was that will the vendor be flashed if I mount it with system and flash along with it. And thanks for the efforts for our land.

lenovo p2a42 Unbrick_g0dsend313

hi
device must be unlocked and connect in fastboot mode
just download and extract in drive c
then extract rom in bin folder
c:[\]lenovo_p2a42_Unbrick_g0dsend313[\]bin
then run lenovo p2a42 Unbrick_g0dsend313.exe
select unbrick(option 1)
wait to finish
pass: Ocs
download from download section
dont copy my work to other forum or groups just link this topic
some needed files
twrp
https://mega.nz/#!DB4mCI4B!6qNmiPCa9RYz0O6qyumcKM-DzJip2gGcXOk93oX0IfU
Stock rom (twrp)
https://mega.nz/#!1OAEGARC!IBUGkGAYTuDYS3qiAnVVDfcEh_oDvEB_H6qO9NmT6uY
https://drive.google.com/file/d/1FcXyOpBNGaTEhfgdBp3yS7NE8vz3ZeWz/view
Custom rom
https://shatelland.com/upload/files/125d118f-ebd5-4040-8acb-c7969b0728fc
Stock rom
http://ul.to/0639fijr
XDA:DevDB Information
lenovo p2a42 Unbrick_g0dsend313, Tool/Utility for the Lenovo P2
Contributors
mlm1102003
OCS Team
Version Information
Status: Testing
Created 2018-10-24
Last Updated 2018-10-24

Hope this will help people out there who bricked their phone.....

Or they could just use the Unbrick/Stock FIrmware Flash tool for every problem they have. (FIrmware version S048)
Androidfilehost Link