Related
Hi, Im new to this forum and Im interested in putting a new ROM on my Wizard.
On my PC i have the new Win7 Ultimate.
How does the process ofputting a new ROM on my phone go on my windows??
Thank you, regards
tljubas said:
Hi, Im new to this forum and Im interested in putting a new ROM on my Wizard.
On my PC i have the new Win7 Ultimate.
How does the process ofputting a new ROM on my phone go on my windows??
Thank you, regards
Click to expand...
Click to collapse
Download and install Windows mobile device center
ducbinh.vn said:
Download and install Windows mobile device center
Click to expand...
Click to collapse
incorrect....you need to download Windows XP mode from Microsoft online(search it on google) then run the installler, etc... then run Windows XP mode, plug in your phone through USB and in the top corner of the Windows XP mode under the USB tab click attach "wizard usb serial" or whatever is the appropriate name.Hope that helps!!!
Nope, when RUU starts to do the upgrade, Conection fails on Windows XP mode, axactly the same on Win7. The solution? Good old fashioned Win XP.
CAPHI said:
Nope, when RUU starts to do the upgrade, Conection fails on Windows XP mode, axactly the same on Win7. The solution? Good old fashioned Win XP.
Click to expand...
Click to collapse
When i used xp mode i found that in order to have a successful flash you must hard reset your phone before you flash, mount the device with the RUU running from the desktop, and once the RUU begins you must remount your device once it gos into the boot screen(it shows up as unidentified...but its the one highest up in the list)then your device will do its thing and then you magically have a new ROM! Hope this helps, and yes obviously Windows XP is a better solution but the thread is updating a ROM on Windows 7...
OK, i got it... im downgrading my PC to Windows XP SP3...
Thanks guys
no need to downgrade OS, use vmware to install XP inside it
my IPL/SPL 2.24. how can i know if it is CID unlocked or not??
tljubas said:
Hi, Im new to this forum and Im interested in putting a new ROM on my Wizard.
On my PC i have the new Win7 Ultimate.
How does the process ofputting a new ROM on my phone go on my windows??
Thank you, regards
Click to expand...
Click to collapse
hi download windows mobile device center 6.1 from ms i have it much better then active syn no need to load xp or anything so the member thats said its incorrect is wrong
grtz cyber weesje
BASSMANBOB said:
incorrect....you need to download Windows XP mode from Microsoft online(search it on google) then run the installler, etc... then run Windows XP mode, plug in your phone through USB and in the top corner of the Windows XP mode under the USB tab click attach "wizard usb serial" or whatever is the appropriate name.Hope that helps!!!
Click to expand...
Click to collapse
he is right your incorrect windows mobile device center 6.1 no need to downgrade or load the xp virtual unit for that i use it daily and many ohters active syn is old ms even stopt working on it
grtz weesje
tljubas said:
my IPL/SPL 2.24. how can i know if it is CID unlocked or not??
Click to expand...
Click to collapse
When your Wizard is starting up, there comes a screen with in the left up corner some info like CID etc. When your Wizard is CID unlocked, then there behind CID x.xx.olip.
I know that it works with a g4 version of the wizard. Look around for more info
Edit: This is only when you succesfully installed Hardspl
I just flashed a rom on my p3300 yesterday and I did it on Windows 7 ultimate.. For me it was working just like that..
Today I will try my fathers Wizard on it
**edit**
No luck on Windows 7 installing WM6.5 on the wizard..
I installed XP on VMware and that worked for me..
Used activesync 4.5 on it.. Installed the CR96 WM6.5 of Cracing
Works like a charm!!
So yeah... Install VMware, that will be the best way to flash your Wizard.
Holla!
Hi,
Has anyone tested booting backtrack 5 or Ubuntu on Microsoft surface pro 2, I did install backtrack and tried all the possible things too boot with usb but no luck. tried volume down button to boot but no luch. Tried advance startup and restarting on that no luck. Appreciate if someone who has tried booting through usb can help me out. Thank you.
Regards,
Rankitt
Did you disable Secure Boot first? It's definitely possible, although the driver support in Linux for the Surface Pro and Pro 2 was still shaky last I checked.
You generally don't really want to run Backtrack on bare metal anyhow. It runs fine in a Hyper-V VM...
So my razr is softbricked. I have been reading the forums here for the last 4 days, probably around 10 hours+ reading for solution. Anyways, my phone refuses to turn on and it pulls up the "downgraded security version" on the fastboot screen. Now, adb recognizes my phone in fastboot mode, and I tried flashing back the stock firmware (I had it updated to 9.30 locked bootloader) to no luck. I read that RSDlite is the way to go, but it refuses to recognize my phone. I have updated the drivers close to 9 times already, and I honestly doubt that's the issue, as adb can recognize my phone just fine. Under configuration/Flash Modes there's an option for fastboot, which is greyed out and unclick-able. Is there something I could do to get it to recognize my phone? I'm not ready to give up on it just yet.
I figured the reason RSDlite wasn't working. For those who are experiencing similar issues with RSDlite not recognizing your device, I can confirm that it does not work with windows 8.1. You will have to run it in windows 7, or else it will not recognize your device.
When you say windows 7, do you mean a true physical win 7 machine, or windows 8.1 with rsdlite being executed in win 7 compatibility mode? I can't get rsdlite to work on my laptop as well and have no other machine..
Sent from my RAZR HD using Tapatalk
I have another old desktop running windows 7. I tried it there and it was able to recognize my razr in fastboot. My laptop runs windows 8.1, and no matter what I did, rsdlite didn't recognize my razr. I think rsdlite just doesn't support 8.1 yet.
Thanks for the clarification, although it was not the answer I was hoping to hear
I honestly would switch my laptop to windows 7, if i didn't have to pay the 100$ for the OS. I still can't seem to adapt to windows 8. I don't like the answer any more than you do, I messed around with the settings enough to give up. Hopefully they might make a patch in the near future to allow it to work on windows 8.1.
Needs to be USB2.0 and you need to use the original moto cable.....generally it does matter
I used a USB 2.0 port on my laptop and desktop, same sync cable on both. If the cable was the only thing stopping it in windows 8.1, then I'm sure it would had been the same in windows 7. However, I was fully able to use RSDlite on my windows 7 desktop without any issues.
cmh714 said:
Needs to be USB2.0 and you need to use the original moto cable.....generally it does matter
Click to expand...
Click to collapse
unfortunately I don't even have a USB2.0 port anymore on my ultrabook.. ah well, who needs RSDLite anyway, but still weird that it doesn't work.
Virtualize a W7 Os
Yeah, my RSD Lite doesn't recgonizde mi device, just in w7. You guys could install a virtual machine program like VM Ware or Virtual Box and Install the drivers, RSD Lite and the desired Firmware.
Hi,
I have been searching far and wide to try to restore my Lumia 1020 (RM-875 059T655 - Singapore CV Variant).
It was running Windows 10 Phone, with approximately 3 updates on the Windows 10 Slow Ring, where all of a sudden while I was using it, it hung/froze and restarted (screen briefly flashed) and now after the Nokia logo shows, the infamous "ERROR: Unable to find a bootable option. Press any key to shut down." displays upon attempt to boot.
I have tried from the Nokia Care Suite (even the ones predating the name, called Ovi Suite), to Lumia Device Recovery Tool, Windows Device Recovery Tool and of course WPInternals 1.2.
The hex method I tried also, returning the same error of "THOR2_ERROR_FA_SIGNATURE_FAIL", where WDRT says the same like the file isn't signed for the phone, etc. This is a Secure Boot thing, I know.
WDRT also says that the phone model is "unknown", so it's not liking Windows 10 being on it obviously.
WPInternals (as does WDRT) manages to switch the phone to the firmware loading stage (with the slightly larger Nokia logo). That's where WDRT mismatches the file Signature.
The problem is that to do the Secure Boot "thing", you need the version of windows that is on the phone (currently Windows 10).
WPInternals won't unlock the bootloader with the Windows 8(.1?) ffu from the selected variant. Error: "Try an FFU that matches the phone." when trying to flash with Unlock Bootloader method (even with engineering SBL3).
WPInternals does show the efuses blown (my guess is going to the Windows Insider preview blows this) and also manages to show some phone hex/hash IDs among other information.
Some more information or help would be appreciated.
Maybe someone has Windows 10 ffu(s)?
I'm not fussed which version of Windows I have, 8.1 or 10, so long as I can revive this phone again, as I still prefer it over Android. So much less hype in Australia!
All I really wanted to see was if I could try out 3CX on the windows phone TBH
Cheers
I have an honor 6 with the broken screen, is there a way to recover the rom with the data and make it work on Windows or linux.
thanks in advance.