Related
Hi All,
Is there any guide on installing a brand new OS for Nexus S (GT-I9020T) ? Somehow my OS crushed and during boot up it stucks on the Google Screen.
Thnx !
Kees
1. enter recovery mode (clockwork mod)
2. wipe data/factory
3. wipe cache partition
4. advanced -> wipe dalvik cache
5. same menu -> wipe battery stats
6. install new rom and you are ready
manthos1978 said:
1. enter recovery mode (clockwork mod)
2. wipe data/factory
3. wipe cache partition
4. advanced -> wipe dalvik cache
5. same menu -> wipe battery stats
6. install new rom and you are ready
Click to expand...
Click to collapse
Thanks for the help. Can you please advice any up to date or ''safe'' ROM ?
And it is okay to install from SD Card directly ?
Cheers
Kees
karabaci said:
Thanks for the help. Can you please advice any up to date or ''safe'' ROM ?
And it is okay to install from SD Card directly ?
Cheers
Kees
Click to expand...
Click to collapse
It is advisable to install from SD card, so yes.
Stock OTA 4.1.2 Jelly Bean ROM is the safest. So i recommend this one: http://d-h.st/t7o
It is stock over-the-air ROM from google with a few added features you may need.
source: http://forum.xda-developers.com/showthread.php?t=1854366
If you want more features you can try stable releases of ROMs posted on the development section.
ej8989 said:
It is advisable to install from SD card, so yes.
Stock OTA 4.1.2 Jelly Bean ROM is the safest. So i recommend this one: http://d-h.st/t7o
It is stock over-the-air ROM from google with a few added features you may need.
source: http://forum.xda-developers.com/showthread.php?t=1854366
If you want more features you can try stable releases of ROMs posted on the development section.
Click to expand...
Click to collapse
Thanks for the advice !
I followed the steps above but when I try to install the pack getting an error of ''Status 7''
Any idea ? or recommendation ?
Ps: I attached the SS
Thnx
Kees
karabaci said:
Thanks for the advice !
I followed the steps above but when I try to install the pack getting an error of ''Status 7''
Any idea ? or recommendation ?
Ps: I attached the SS
Thnx
Kees
Click to expand...
Click to collapse
You need to update your custom recovery.
Download CWM 6.0.1.0 here: http://download2.clockworkmod.com/recoveries/recovery-clockwork-touch-6.0.1.0-crespo.img
Put it anywhere in your pc, or even on your sdcard.
Then go to command prompt and type fastboot flash recovery <put EXACT img file location and name here>
Thank you all !
It is back now
Last question: Is my phone going to make system updates via internet automatically ?
Regards
Kees
karabaci said:
Thank you all !
It is back now
Last question: Is my phone going to make system updates via internet automatically ?
Regards
Kees
Click to expand...
Click to collapse
Because you have a custom recovery, no.
That's the advantage of using a custom recovery though, you can just download and flash any newly updated ROM/s instead of waiting for the official google update.
i m a newbie here
i m unable to install this rom http://forum.xda-developers.com/showthread.php?t=2375958
whenever i m installing this rom the phone shows canvas2 icon then goes into cmw recovery mode
previously i was using rayne rom final.
i m unable to play 720p videos in rayne rom final thats why i was trying to switch in this rom.
thanks in advance
Are u using MMX A110 ? And if yes then reinstall the rom again.. Before installing wipe data and cache.. And then go to mount and storage.. format system from there. And then wipe dalvik cache. Then flash the canvas4 zip file
Sent from my Qmobile Noir A10 using Tapatalk
yes
mrtaim3 said:
Are u using MMX A110 ? And if yes then reinstall the rom again.. Before installing wipe data and cache.. And then go to mount and storage.. format system from there. And then wipe dalvik cache. Then flash the canvas4 zip file
Sent from my Qmobile Noir A10 using Tapatalk
Click to expand...
Click to collapse
i m using canvas 2
i m folowing all the steps as given.
i didnt faced any problem in installing rayne rom final.
is it happening because i m using rom build on 4.2.2 n dis xperia one is based on 4.1.2
aniket95 said:
i m using canvas 2
i m folowing all the steps as given.
i didnt faced any problem in installing rayne rom final.
is it happening because i m using rom build on 4.2.2 n dis xperia one is based on 4.1.2
Click to expand...
Click to collapse
No not really.. Im using Dark Nexus 4.2.2 and i have used every single Rom.. and all are working fine. Ok so the problem maybe persisting bcz u are not flashing it accordingly.. Download 4 files given in the thread.. First flash the larger file.. Which is the rom file. Then there comes three patches.. then flash 3 patches after that.. Flash kernel which is also given in the thread. Then reboot ur system. and see if it works
okk
mrtaim3 said:
No not really.. Im using Dark Nexus 4.2.2 and i have used every single Rom.. and all are working fine. Ok so the problem maybe persisting bcz u are not flashing it accordingly.. Download 4 files given in the thread.. First flash the larger file.. Which is the rom file. Then there comes three patches.. then flash 3 patches after that.. Flash kernel which is also given in the thread. Then reboot ur system. and see if it works
Click to expand...
Click to collapse
okk trying one more time..!
can you please elaborate the steps.:fingers-crossed:
i tried one more time it again showed me canvas 2 logo then directed to cmw recovery
First download 5 files given in the OP of that thread i.e 1 ROM,3 Patches and 1 Kernel
1). After downloading put all the files in ur sd card.
2). Reboot into CWM recovery.
3). Wipe data / cache / dalvik cache
4). Flash the ROM file
5). Then flash 3 patches
6). Then Fix permissions
7). Then reboot your phone.
Then reboot your phone to recovery again and flash kernel
4) Wipe Data/Factory Reset And Wipe Partition
5) From Advance Menu Do Dalvik Catch Clear
6) Go in Mount And Storage select FORMAT SYSTEM
7) Select Install From SD and Select File And Click YES
8) Fix Permission
9) System reboots....
mrtaim3 said:
First download 5 files given in the OP of that thread i.e 1 ROM,3 Patches and 1 Kernel
1). After downloading put all the files in ur sd card.
2). Reboot into CWM recovery.
3). Wipe data / cache / dalvik cache
4). Flash the ROM file
5). Then flash 3 patches
6). Then Fix permissions
7). Then reboot your phone.
Then reboot your phone to recovery again and flash kernel
4) Wipe Data/Factory Reset And Wipe Partition
5) From Advance Menu Do Dalvik Catch Clear
6) Go in Mount And Storage select FORMAT SYSTEM
7) Select Install From SD and Select File And Click YES
8) Fix Permission
9) System reboots....
Click to expand...
Click to collapse
is flashing kernel is necessary...?
and i m unable to understand ur steps sory..!
Hi @aniket95. If the problem exists after following the steps given by mrtaim3 then flash Stock JB ROM first. Then try custom ROM.
UnNaMeD__ said:
Hi @aniket95. If the problem exists after following the steps given by mrtaim3 then flash Stock JB ROM first. Then try custom ROM.
Click to expand...
Click to collapse
okk
thank u sir will surely try it
i dont have stock rom will download
aniket95 said:
is flashing kernel is necessary...?
and i m unable to understand ur steps sory..!
Click to expand...
Click to collapse
Andiroxu kernel is required on 4.2 JB. But you are trying to flash 4.1, so it isn't necessary to flash kernel
aniket95 said:
is flashing kernel is necessary...?
and i m unable to understand ur steps sory..!
Click to expand...
Click to collapse
No its not necessary bro.. Just flash rom and 3 patches. and if still the problem persist then try another rom.. There are many roms for mmx a110
Sent from my Qmobile Noir A10 using Tapatalk
UnNaMeD__ said:
Andiroxu kernel is required on 4.2 JB. But you are trying to flash 4.1, so it isn't necessary to flash kernel
Click to expand...
Click to collapse
thanks alot dude..!
now i have to just flash the four files.!
will surely tell you
can you suggest any good rom for canvas 2 with xperia apps
In this thread you will find every single rom for ur device.. Check it out http://forum.xda-developers.com/showthread.php?t=2172561
aniket95 said:
can you suggest any good rom for canvas 2 with xperia apps
Click to expand...
Click to collapse
Well if you searching a ROM for xperia apps. You can have these on any rom
xperia z icons:
http://forum.xda-developers.com/showthread.php?t=2249734
keyboard of zperia z and z1:
http://forum.xda-developers.com/showthread.php?t=2196653
X4 video player from Sony Xperia Z:
http://forum.xda-developers.com/showthread.php?t=2262083
xperia launcher:
http://forum.xda-developers.com/showthread.php?t=2294895
more here:
http://forum.xda-developers.com/showthread.php?t=2342863
Anyway if you want suggestion of any rom with xperia app preinstalled then i think your own choice of LegoIce_Xperia Z UI rom is good!
---------- Post added at 11:32 PM ---------- Previous post was at 11:30 PM ----------
Did you successfully flashed as I told you LegoIce_Xperia Z UI or facing any problem?
---------- Post added at 11:39 PM ---------- Previous post was at 11:32 PM ----------
aniket95 said:
thanks alot dude..!
now i have to just flash the four files.!
will surely tell you
Click to expand...
Click to collapse
After downloading stock ROM do this:
1. put all files on your sd card.
2. boot into recovery.
3. wipe data/factory reset.
4. wipe cache partition
5. advance ---> wipe dalvik cache
6. mounts and storage ----> formate system + formate cache.
7. flash stock rom
8. start your phone
9. reboot into recovery
10. follow step no. 3+4+5
11. Flash your xperia rom.
12. start your phone.
13. reboot into recovery
14. wipe cache parition + dalvik cache
15. flash your patches
16. fix permissions and start your phone.
u should install any 4.2karnel after installing rom
UnNaMeD__ said:
Well if you searching a ROM for xperia apps. You can have these on any rom
xperia z icons:
http://forum.xda-developers.com/showthread.php?t=2249734
keyboard of zperia z and z1:
http://forum.xda-developers.com/showthread.php?t=2196653
X4 video player from Sony Xperia Z:
http://forum.xda-developers.com/showthread.php?t=2262083
xperia launcher:
http://forum.xda-developers.com/showthread.php?t=2294895
more here:
http://forum.xda-developers.com/showthread.php?t=2342863
Anyway if you want suggestion of any rom with xperia app preinstalled then i think your own choice of LegoIce_Xperia Z UI rom is good!
---------- Post added at 11:32 PM ---------- Previous post was at 11:30 PM ----------
Did you successfully flashed as I told you LegoIce_Xperia Z UI or facing any problem?
---------- Post added at 11:39 PM ---------- Previous post was at 11:32 PM ----------
After downloading stock ROM do this:
1. put all files on your sd card.
2. boot into recovery.
3. wipe data/factory reset.
4. wipe cache partition
5. advance ---> wipe dalvik cache
6. mounts and storage ----> formate system + formate cache.
7. flash stock rom
8. start your phone
9. reboot into recovery
10. follow step no. 3+4+5
11. Flash your xperia rom.
12. start your phone.
13. reboot into recovery
14. wipe cache parition + dalvik cache
15. flash your patches
16. fix permissions and start your phone.
Click to expand...
Click to collapse
yeahh thanx dude
i installed stock rom first den
i installed Canxperia rom which i really liked
thanx :good:
how to clear dalvik cache as i dont get the advanced settings in my mmx canvas 2 while booting up
Galaxy ACE 3 LTE users, I represent you AOKP custom AOSP based ROM!
Everything is like CM11 from this thread i suppose : http://forum.xda-developers.com/showthread.php?t=2800259
You will need CWM from the CM11 thread in order to install!!!
GAPPS: http://forum.xda-developers.com/showthread.php?t=2608800
Download: https://mega.co.nz/#!Jk1XjJ5Q!4si-OqvZ3CYgRedBV91ieJcehJ-Tx6FO44ggQQMh8NE
INSTALLATION
1.Reboot into recovery
2.Wipe data factory reset
3.Format system
4.Flash Rom
5.Flash Gapps
6.Reboot
ENABLE ART(Need fresh install)
1. Reboot into recovery mode
2. Wipe data, cache and dalvik cache
3. Format /system partition
4. Flash cm11
5. Reboot
6. Enable ART
7. Reboot into Recovery
8. Flash Gapps
9. Reboot
This is for GT-S7275R
Attention: It is harder for me to support AOKP rather than CM so do not ask for updates, I' ll do everything i can
Don't forget to press "Thanks"!!!
PS: I am not responsible for any damage to your device
kostoulhs said:
Galaxy ACE 3 LTE users, I represent you AOKP custom AOSP based ROM!
Everything is like CM11 from this thread i suppose : http://forum.xda-developers.com/showthread.php?t=2800259
You will need CWM from the CM11 thread in order to install!!!
GAPPS: http://forum.xda-developers.com/showthread.php?t=2608800
Download: https://mega.co.nz/#!Jk1XjJ5Q!4si-OqvZ3CYgRedBV91ieJcehJ-Tx6FO44ggQQMh8NE
INSTALLATION
1.Reboot into recovery
2.Wipe data factory reset
3.Format system
4.Flash Rom
5.Flash Gapps
6.Reboot
ENABLE ART(Need fresh install)
1. Reboot into recovery mode
2. Wipe data, cache and dalvik cache
3. Format /system partition
4. Flash cm11
5. Reboot
6. Enable ART
7. Reboot into Recovery
8. Flash Gapps
9. Reboot
This is for GT-S7275R
Attention: It is harder to support AOKP rather than CM so do not ask for updates, I' ll do everything i can
Don't forget to press "Thanks"!!!
PS: I am not responsible for any damage to your device
Click to expand...
Click to collapse
Bugs?
Arcanister99 said:
Bugs?
Click to expand...
Click to collapse
I haven't tested it a lot yet, i think that everything is like in CM11
Didn't find anything major
For personal reasons the OP is not able to support this project.
As it was a challenge @rohitsinghpu, here is MY 7th PORTED ROM for Xolo Q3000, with special thanks to:
1) Xolo for the awesome phone at affordable price,
2) MIUI for the wonderful rom,
3) Of course, me for Custom Boot Logo, Re-partitioning (/system - 1gb ) & Porting ROM for Xolo Q3000.
Pre-requisites:
1) Custom recovery such as TWRP, CWM, PhilzTouch(TWRP 2.8.4 rev2 prefered, as I've tested rom using this recovery)
2) Before proceeding, Back up your Current Rom (Failsafe).
3) /System minimum 1gb partition (Repartition your phone, before you flash this ROM).
4) SP Flash Tools & Stock rom (In case, If you are in trouble).
Procedure:
1) Put the downloaded MiUi7_v5.10.15 by Sachin.zip in sd card.
2) Reboot to Recovery using root apps or by pressing (PowerOn + VolumeUp) key combination.
3) If you are on MiUi ROM, Wipe Cache, Dalvik Cache, Android Secure using Advanced Wipe, else perform Full Wipe.
4) Install MiUi7_v5.10.15 by Sachin.zip
5) Wipe Cache & Dalvik Cache & Reboot.
9) Phone will get upgraded to newer version, without losing any data.
10) If u face any problem or want to flash as clean install, then wipe data as well as system, alongwith Dalvik & Cache, before flashing rom.
WARNING:
I WILL NOT BE RESPONSIBLE FOR ANY DAMAGE TO YOUR DEVICE. EVEN THOUGH, I'VE TESTED & USING IT ON MY DEVICE. TRY AT YOUR OWN RISK.
HOWEVER, I WILL BE AVAILABLE, ALWAYS, TO HELP YOU & SOLVE THE PROBLEMS FACED BY YOU.
Features:
1) Everything from MIUI working fine
2) Latest Google Keybord
3) WSM Tools Pre-Installed
4) SuperUser & BusyBox installed
5) MIUI Video as default media player
6) WiFi Direct working
7) Advanced power menu
8) Custom Boot Logo
9) Full changelog at: http://en.miui.com
Bugs:
Nearly Bugless ROM, few minor bugs are as follows:
1) Some of the Icons missing when using default theme(Change the theme).
2) Report, if you found any.
Note:
For Engineer Mode, dial *#*#3646633#*#*,
Download Links:
1) MiUi7_v5.10.15 Full ROM
All the Best, Guys......
Screenshots:
https://drive.google.com/open?id=0B9c3NsdJ2PscTlE2WVJid2lwX3c
Updates:
If you are using TWRP, Open Updater application or Launch From Settings/About Phone/System updates, from options(top right corner), select Choose Update Package, locate the OTA.zip file. Wait for Updater to finish the job, phone will reboot to recovery & then to updated version.
Also, if you are on twrp or any other recovery, you can update as follows:
reboot to recovery and flash ota.zip, wipe cache & dalvik, reboot.
1) MiUi7_v5.10.15 to 5.10.22_OTA
2) MiUi7_v5.10.22 to 5.10.29_OTA
Bug Fixes:
Great work bro, i ws missing wsm tool as it ws not compatible with roith bro port, it gave fc n random reboot, i tried many wsm version, then fount it ws instability in rom, ( sorry no offense roith bro, u did ur best and im thankfull to u)
Sachin bro, i always look forward to ur work?
Thanks fr making update easyy, downloading now, will review later
sachin.r.fulzele said:
Updates:
Open Updater application or Launch From Settings/About Phone/System updates, from options(top right corner), select Choose Update Package, locate the OTA.zip file. Wait for Updater to finish the job, phone will reboot to recovery & then to updated version.
1) MiUi7_v5.10.15 to 5.10.22_OTA
2) MiUi7_v5.10.22 to 5.10.29_OTA
Click to expand...
Click to collapse
Thanks for the beautiful rom.
Sir when I tried to install ota updates from system updates it is going to recovery and saying installation aborted. Any other way to install these ota updates?
Rom is completely stable bro, theme stays even aftr reebot, all xposed modules working good, no lag, giving good battery backup,
Is there any ideas to port other roms from turkdevs
forum.turkdevs.com/konu-4-4-2-xperia™-z3-v5-1-final-for-gm-discovery.html
forum.turkdevs.com/konu-4-4-2-art-samsung-galaxy-s6-rom-for-gm-discovery.html
forum.turkdevs.com/konu-port-ios-8-ayfone-rom-v1.html
These r the few roms i like to get my hands on bro,
iaditya91 said:
Thanks for the beautiful rom.
Sir when I tried to install ota updates from system updates it is going to recovery and saying installation aborted. Any other way to install these ota updates?
Click to expand...
Click to collapse
U must be on twrp to update in the mentioned way. If u r on any other recovery, flash as a normal zip from recovery.
Jagadish-ravi said:
Rom is completely stable bro, theme stays even aftr reebot, all xposed modules working good, no lag, giving good battery backup,
Is there any ideas to port other roms from turkdevs
forum.turkdevs.com/konu-4-4-2-xperia™-z3-v5-1-final-for-gm-discovery.html
forum.turkdevs.com/konu-4-4-2-art-samsung-galaxy-s6-rom-for-gm-discovery.html
forum.turkdevs.com/konu-port-ios-8-ayfone-rom-v1.html
These r the few roms i like to get my hands on bro,
Click to expand...
Click to collapse
Xperia z3 & galaxy s6 rom will be posted after 9 November, as my exams are running.
sachin.r.fulzele said:
Xperia z3 & galaxy s6 rom will be posted after 9 November, as my exams are running.
Click to expand...
Click to collapse
Awesome bro :thumbup::thumbup:
Does security and cleaner app works fine or still has reboot issues...
Inbuilt browser fc..
hi i have ported miui v5 for our galaxy core dous bui i dont have the mobile so i need testers to do it
the rom had all miui v5 features it is real not themed
the rom is 4.1.1 jelly bean and real miui:laugh:
Installation :
[*]Download the rom, after download place the zip in /sdcard
[*]Reboot to cwm or twrp wipe data/factory reset ,wipe system
[*]Flash zip >miui5 for galaxy core.zip
[*]wait until finish then reboot
[*]and enjoy
if it is not boot post for me to fix it
Click to expand...
Click to collapse
download link
https://mega.nz/#!KVYXyCDZ!tfZiwPcb0PlW62SMjwBHl0N0yV1Hm21AY2OrL99k4rU
Solution for the rom problem dose not boot
Click to expand...
Click to collapse
Instructions
[*]download meta-inf file
[*]etxract the file
[*]put meta_inf in the folder of the rom
[*]agree for replaces files
[*]flash the rom agian and it will boot
download link http://http://forum.xda-developers.com/attachment.php?attachmentid=3862681&d=1472826990
XDA:DevDB Information
miui 5 for (18262), ROM for the Samsung Galaxy Core
Contributors
hade ragab
Source Code: no source it is ported
ROM OS Version: 4.1.x Jelly Bean
ROM Kernel: Linux 3.4.x
ROM Firmware Required: galaxy core (18262)
Based On: ported miui v5
Version Information
Status: Testing
Beta Release Date: 2016-08-25
Created 2016-08-25
Last Updated 2016-09-02
Reserved
i recommended philz recovery to flash the rom with
download link http://d-h.st/users/ali.filth/?fld_id=35414#files
thanks to ali.filth, Phil3759
what works? add work and not work list and screenshots please!
Not installing
Showing status 6 error... Plz fix it...
Harsh.Pratik said:
Showing status 6 error... Plz fix it...
Click to expand...
Click to collapse
make full wipe
wipe system
wipe cache
wipe davlic cache
and use philz
mois2511 said:
what works? add work and not work list and screenshots please!
Click to expand...
Click to collapse
i have wirted that i haven't the mob and need testers to test the rom
rom unable to boot
after using philz recovery
wipe data
wipe cache
wipe dalvik cache all done but status 6 error continues and rom unable to boot..plz find the solution
you have to change updater script while porting
pd007 said:
after using philz recovery
wipe data
wipe cache
wipe dalvik cache all done but status 6 error continues and rom unable to boot..plz find the solution
you have to change updater script while porting
Click to expand...
Click to collapse
ok i will fix it
ok i fixed it
Instructions
download meta-inf file
etxract the file
put meta_inf in the folder of the rom
agree for replaces files
flash the rom agian and it will boot
after applying your fix still problem continues with status 6 error
pd007 said:
after applying your fix still problem continues with status 6 error
Click to expand...
Click to collapse
Try to wipe system i fixed the error
tried everything but same error bro
pd007 said:
tried everything but same error bro
Click to expand...
Click to collapse
Have you mount system from the recovery
hade ragab said:
Have you mount system from the recovery
Click to expand...
Click to collapse
how to mount system..plz tell me the procedure
Go to on recovery mounts and stroage then click
1_mount system
2_mount cache
3_mount data
hade ragab said:
Go to on recovery mounts and stroage then click
1_mount system
2_mount cache
3_mount data
Click to expand...
Click to collapse
thnx bro...will see wht happens
pd007 said:
thnx bro...will see wht happens
Click to expand...
Click to collapse
ok i wait you
unable to boot bro...we already have baidu os by abhi it is same as miui v5 . so if possible plz make real KitKat rom for our lovely core
pd007 said:
unable to boot bro...we already have baidu os by abhi it is same as miui v5 . so if possible plz make real KitKat rom for our lovely core
Click to expand...
Click to collapse
Ok thanks for testing
hi, did you have to fix this rom? i want to try this rom